1 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
2 /*
3  * Copyright (C) 2012-2014, 2018-2024 Intel Corporation
4  * Copyright (C) 2016-2017 Intel Deutschland GmbH
5  */
6 #ifndef __iwl_fw_api_tx_h__
7 #define __iwl_fw_api_tx_h__
8 #include <linux/ieee80211.h>
9 
10 /**
11  * enum iwl_tx_flags - bitmasks for tx_flags in TX command
12  * @TX_CMD_FLG_PROT_REQUIRE: use RTS or CTS-to-self to protect the frame
13  * @TX_CMD_FLG_WRITE_TX_POWER: update current tx power value in the mgmt frame
14  * @TX_CMD_FLG_ACK: expect ACK from receiving station
15  * @TX_CMD_FLG_STA_RATE: use RS table with initial index from the TX command.
16  *	Otherwise, use rate_n_flags from the TX command
17  * @TX_CMD_FLG_BAR: this frame is a BA request, immediate BAR is expected
18  *	Must set TX_CMD_FLG_ACK with this flag.
19  * @TX_CMD_FLG_TXOP_PROT: TXOP protection requested
20  * @TX_CMD_FLG_VHT_NDPA: mark frame is NDPA for VHT beamformer sequence
21  * @TX_CMD_FLG_HT_NDPA: mark frame is NDPA for HT beamformer sequence
22  * @TX_CMD_FLG_CSI_FDBK2HOST: mark to send feedback to host (only if good CRC)
23  * @TX_CMD_FLG_BT_PRIO_MASK: BT priority value
24  * @TX_CMD_FLG_BT_PRIO_POS: the position of the BT priority (bit 11 is ignored
25  *	on old firmwares).
26  * @TX_CMD_FLG_BT_DIS: disable BT priority for this frame
27  * @TX_CMD_FLG_SEQ_CTL: set if FW should override the sequence control.
28  *	Should be set for mgmt, non-QOS data, mcast, bcast and in scan command
29  * @TX_CMD_FLG_MORE_FRAG: this frame is non-last MPDU
30  * @TX_CMD_FLG_TSF: FW should calculate and insert TSF in the frame
31  *	Should be set for beacons and probe responses
32  * @TX_CMD_FLG_CALIB: activate PA TX power calibrations
33  * @TX_CMD_FLG_KEEP_SEQ_CTL: if seq_ctl is set, don't increase inner seq count
34  * @TX_CMD_FLG_MH_PAD: driver inserted 2 byte padding after MAC header.
35  *	Should be set for 26/30 length MAC headers
36  * @TX_CMD_FLG_RESP_TO_DRV: zero this if the response should go only to FW
37  * @TX_CMD_FLG_TKIP_MIC_DONE: FW already performed TKIP MIC calculation
38  * @TX_CMD_FLG_DUR: disable duration overwriting used in PS-Poll Assoc-id
39  * @TX_CMD_FLG_FW_DROP: FW should mark frame to be dropped
40  * @TX_CMD_FLG_EXEC_PAPD: execute PAPD
41  * @TX_CMD_FLG_PAPD_TYPE: 0 for reference power, 1 for nominal power
42  * @TX_CMD_FLG_HCCA_CHUNK: mark start of TSPEC chunk
43  */
44 enum iwl_tx_flags {
45 	TX_CMD_FLG_PROT_REQUIRE		= BIT(0),
46 	TX_CMD_FLG_WRITE_TX_POWER	= BIT(1),
47 	TX_CMD_FLG_ACK			= BIT(3),
48 	TX_CMD_FLG_STA_RATE		= BIT(4),
49 	TX_CMD_FLG_BAR			= BIT(6),
50 	TX_CMD_FLG_TXOP_PROT		= BIT(7),
51 	TX_CMD_FLG_VHT_NDPA		= BIT(8),
52 	TX_CMD_FLG_HT_NDPA		= BIT(9),
53 	TX_CMD_FLG_CSI_FDBK2HOST	= BIT(10),
54 	TX_CMD_FLG_BT_PRIO_POS		= 11,
55 	TX_CMD_FLG_BT_PRIO_MASK		= BIT(11) | BIT(12),
56 	TX_CMD_FLG_BT_DIS		= BIT(12),
57 	TX_CMD_FLG_SEQ_CTL		= BIT(13),
58 	TX_CMD_FLG_MORE_FRAG		= BIT(14),
59 	TX_CMD_FLG_TSF			= BIT(16),
60 	TX_CMD_FLG_CALIB		= BIT(17),
61 	TX_CMD_FLG_KEEP_SEQ_CTL		= BIT(18),
62 	TX_CMD_FLG_MH_PAD		= BIT(20),
63 	TX_CMD_FLG_RESP_TO_DRV		= BIT(21),
64 	TX_CMD_FLG_TKIP_MIC_DONE	= BIT(23),
65 	TX_CMD_FLG_DUR			= BIT(25),
66 	TX_CMD_FLG_FW_DROP		= BIT(26),
67 	TX_CMD_FLG_EXEC_PAPD		= BIT(27),
68 	TX_CMD_FLG_PAPD_TYPE		= BIT(28),
69 	TX_CMD_FLG_HCCA_CHUNK		= BIT(31)
70 }; /* TX_FLAGS_BITS_API_S_VER_1 */
71 
72 /**
73  * enum iwl_tx_cmd_flags - bitmasks for tx_flags in TX command for 22000
74  * @IWL_TX_FLAGS_CMD_RATE: use rate from the TX command
75  * @IWL_TX_FLAGS_ENCRYPT_DIS: frame should not be encrypted, even if it belongs
76  *	to a secured STA
77  * @IWL_TX_FLAGS_HIGH_PRI: high priority frame (like EAPOL) - can affect rate
78  *	selection, retry limits and BT kill
79  * @IWL_TX_FLAGS_RTS: firmware used an RTS
80  * @IWL_TX_FLAGS_CTS: firmware used CTS-to-self
81  */
82 enum iwl_tx_cmd_flags {
83 	IWL_TX_FLAGS_CMD_RATE		= BIT(0),
84 	IWL_TX_FLAGS_ENCRYPT_DIS	= BIT(1),
85 	IWL_TX_FLAGS_HIGH_PRI		= BIT(2),
86 	/* Use these flags only from
87 	 * TX_FLAGS_BITS_API_S_VER_4 and above */
88 	IWL_TX_FLAGS_RTS		= BIT(3),
89 	IWL_TX_FLAGS_CTS		= BIT(4),
90 }; /* TX_FLAGS_BITS_API_S_VER_3 */
91 
92 /**
93  * enum iwl_tx_pm_timeouts - pm timeout values in TX command
94  * @PM_FRAME_NONE: no need to suspend sleep mode
95  * @PM_FRAME_MGMT: fw suspend sleep mode for 100TU
96  * @PM_FRAME_ASSOC: fw suspend sleep mode for 10sec
97  */
98 enum iwl_tx_pm_timeouts {
99 	PM_FRAME_NONE		= 0,
100 	PM_FRAME_MGMT		= 2,
101 	PM_FRAME_ASSOC		= 3,
102 };
103 
104 #define TX_CMD_SEC_MSK			0x07
105 #define TX_CMD_SEC_WEP_KEY_IDX_POS	6
106 #define TX_CMD_SEC_WEP_KEY_IDX_MSK	0xc0
107 
108 /**
109  * enum iwl_tx_cmd_sec_ctrl - bitmasks for security control in TX command
110  * @TX_CMD_SEC_WEP: WEP encryption algorithm.
111  * @TX_CMD_SEC_CCM: CCM encryption algorithm.
112  * @TX_CMD_SEC_TKIP: TKIP encryption algorithm.
113  * @TX_CMD_SEC_EXT: extended cipher algorithm.
114  * @TX_CMD_SEC_GCMP: GCMP encryption algorithm.
115  * @TX_CMD_SEC_KEY128: set for 104 bits WEP key.
116  * @TX_CMD_SEC_KEY_FROM_TABLE: for a non-WEP key, set if the key should be taken
117  *	from the table instead of from the TX command.
118  *	If the key is taken from the key table its index should be given by the
119  *	first byte of the TX command key field.
120  */
121 enum iwl_tx_cmd_sec_ctrl {
122 	TX_CMD_SEC_WEP			= 0x01,
123 	TX_CMD_SEC_CCM			= 0x02,
124 	TX_CMD_SEC_TKIP			= 0x03,
125 	TX_CMD_SEC_EXT			= 0x04,
126 	TX_CMD_SEC_GCMP			= 0x05,
127 	TX_CMD_SEC_KEY128		= 0x08,
128 	TX_CMD_SEC_KEY_FROM_TABLE	= 0x10,
129 };
130 
131 /*
132  * TX command Frame life time in us - to be written in pm_frame_timeout
133  */
134 #define TX_CMD_LIFE_TIME_INFINITE	0xFFFFFFFF
135 #define TX_CMD_LIFE_TIME_DEFAULT	2000000 /* 2000 ms*/
136 #define TX_CMD_LIFE_TIME_PROBE_RESP	40000 /* 40 ms */
137 #define TX_CMD_LIFE_TIME_EXPIRED_FRAME	0
138 
139 /*
140  * TID for non QoS frames - to be written in tid_tspec
141  */
142 #define IWL_TID_NON_QOS	0
143 
144 /*
145  * Limits on the retransmissions - to be written in {data,rts}_retry_limit
146  */
147 #define IWL_DEFAULT_TX_RETRY			15
148 #define IWL_MGMT_DFAULT_RETRY_LIMIT		3
149 #define IWL_RTS_DFAULT_RETRY_LIMIT		60
150 #define IWL_BAR_DFAULT_RETRY_LIMIT		60
151 #define IWL_LOW_RETRY_LIMIT			7
152 
153 /**
154  * enum iwl_tx_offload_assist_flags_pos -  set %iwl_tx_cmd offload_assist values
155  * @TX_CMD_OFFLD_IP_HDR: offset to start of IP header (in words)
156  *	from mac header end. For normal case it is 4 words for SNAP.
157  *	note: tx_cmd, mac header and pad are not counted in the offset.
158  *	This is used to help the offload in case there is tunneling such as
159  *	IPv6 in IPv4, in such case the ip header offset should point to the
160  *	inner ip header and IPv4 checksum of the external header should be
161  *	calculated by driver.
162  * @TX_CMD_OFFLD_L4_EN: enable TCP/UDP checksum
163  * @TX_CMD_OFFLD_L3_EN: enable IP header checksum
164  * @TX_CMD_OFFLD_MH_SIZE: size of the mac header in words. Includes the IV
165  *	field. Doesn't include the pad.
166  * @TX_CMD_OFFLD_PAD: mark 2-byte pad was inserted after the mac header for
167  *	alignment
168  * @TX_CMD_OFFLD_AMSDU: mark TX command is A-MSDU
169  */
170 enum iwl_tx_offload_assist_flags_pos {
171 	TX_CMD_OFFLD_IP_HDR =		0,
172 	TX_CMD_OFFLD_L4_EN =		6,
173 	TX_CMD_OFFLD_L3_EN =		7,
174 	TX_CMD_OFFLD_MH_SIZE =		8,
175 	TX_CMD_OFFLD_PAD =		13,
176 	TX_CMD_OFFLD_AMSDU =		14,
177 };
178 
179 #define IWL_TX_CMD_OFFLD_MH_MASK	0x1f
180 #define IWL_TX_CMD_OFFLD_IP_HDR_MASK	0x3f
181 
182 /* TODO: complete documentation for try_cnt and btkill_cnt */
183 /**
184  * struct iwl_tx_cmd - TX command struct to FW
185  * ( TX_CMD = 0x1c )
186  * @len: in bytes of the payload, see below for details
187  * @offload_assist: TX offload configuration
188  * @tx_flags: combination of TX_CMD_FLG_*, see &enum iwl_tx_flags
189  * @scratch: scratch buffer used by the device
190  * @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is
191  *	cleared. Combination of RATE_MCS_*
192  * @sta_id: index of destination station in FW station table
193  * @sec_ctl: security control, TX_CMD_SEC_*
194  * @initial_rate_index: index into the the rate table for initial TX attempt.
195  *	Applied if TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames.
196  * @reserved2: reserved
197  * @key: security key
198  * @reserved3: reserved
199  * @life_time: frame life time (usecs??)
200  * @dram_lsb_ptr: Physical address of scratch area in the command (try_cnt +
201  *	btkill_cnd + reserved), first 32 bits. "0" disables usage.
202  * @dram_msb_ptr: upper bits of the scratch physical address
203  * @rts_retry_limit: max attempts for RTS
204  * @data_retry_limit: max attempts to send the data packet
205  * @tid_tspec: TID/tspec
206  * @pm_frame_timeout: PM TX frame timeout
207  * @reserved4: reserved
208  * @payload: payload (same as @hdr)
209  * @hdr: 802.11 header (same as @payload)
210  *
211  * The byte count (both len and next_frame_len) includes MAC header
212  * (24/26/30/32 bytes)
213  * + 2 bytes pad if 26/30 header size
214  * + 8 byte IV for CCM or TKIP (not used for WEP)
215  * + Data payload
216  * + 8-byte MIC (not used for CCM/WEP)
217  * It does not include post-MAC padding, i.e.,
218  * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.
219  * Range of len: 14-2342 bytes.
220  *
221  * After the struct fields the MAC header is placed, plus any padding,
222  * and then the actial payload.
223  */
224 struct iwl_tx_cmd {
225 	__le16 len;
226 	__le16 offload_assist;
227 	__le32 tx_flags;
228 	struct {
229 		u8 try_cnt;
230 		u8 btkill_cnt;
231 		__le16 reserved;
232 	} scratch; /* DRAM_SCRATCH_API_U_VER_1 */
233 	__le32 rate_n_flags;
234 	u8 sta_id;
235 	u8 sec_ctl;
236 	u8 initial_rate_index;
237 	u8 reserved2;
238 	u8 key[16];
239 	__le32 reserved3;
240 	__le32 life_time;
241 	__le32 dram_lsb_ptr;
242 	u8 dram_msb_ptr;
243 	u8 rts_retry_limit;
244 	u8 data_retry_limit;
245 	u8 tid_tspec;
246 	__le16 pm_frame_timeout;
247 	__le16 reserved4;
248 	union {
249 		DECLARE_FLEX_ARRAY(u8, payload);
250 		DECLARE_FLEX_ARRAY(struct ieee80211_hdr, hdr);
251 	};
252 } __packed; /* TX_CMD_API_S_VER_6 */
253 
254 struct iwl_dram_sec_info {
255 	__le32 pn_low;
256 	__le16 pn_high;
257 	__le16 aux_info;
258 } __packed; /* DRAM_SEC_INFO_API_S_VER_1 */
259 
260 /**
261  * struct iwl_tx_cmd_gen2 - TX command struct to FW for 22000 devices
262  * ( TX_CMD = 0x1c )
263  * @len: in bytes of the payload, see below for details
264  * @offload_assist: TX offload configuration
265  * @flags: combination of &enum iwl_tx_cmd_flags
266  * @dram_info: FW internal DRAM storage
267  * @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is
268  *	cleared. Combination of RATE_MCS_*
269  * @hdr: 802.11 header
270  */
271 struct iwl_tx_cmd_gen2 {
272 	__le16 len;
273 	__le16 offload_assist;
274 	__le32 flags;
275 	struct iwl_dram_sec_info dram_info;
276 	__le32 rate_n_flags;
277 	struct ieee80211_hdr hdr[];
278 } __packed; /* TX_CMD_API_S_VER_7,
279 	       TX_CMD_API_S_VER_9 */
280 
281 /**
282  * struct iwl_tx_cmd_gen3 - TX command struct to FW for AX210+ devices
283  * ( TX_CMD = 0x1c )
284  * @len: in bytes of the payload, see below for details
285  * @flags: combination of &enum iwl_tx_cmd_flags
286  * @offload_assist: TX offload configuration
287  * @dram_info: FW internal DRAM storage
288  * @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is
289  *	cleared. Combination of RATE_MCS_*
290  * @reserved: reserved
291  * @hdr: 802.11 header
292  */
293 struct iwl_tx_cmd_gen3 {
294 	__le16 len;
295 	__le16 flags;
296 	__le32 offload_assist;
297 	struct iwl_dram_sec_info dram_info;
298 	__le32 rate_n_flags;
299 	u8 reserved[8];
300 	struct ieee80211_hdr hdr[];
301 } __packed; /* TX_CMD_API_S_VER_8,
302 	       TX_CMD_API_S_VER_10 */
303 
304 /*
305  * TX response related data
306  */
307 
308 /*
309  * enum iwl_tx_status - status that is returned by the fw after attempts to Tx
310  * @TX_STATUS_SUCCESS:
311  * @TX_STATUS_DIRECT_DONE:
312  * @TX_STATUS_POSTPONE_DELAY:
313  * @TX_STATUS_POSTPONE_FEW_BYTES:
314  * @TX_STATUS_POSTPONE_BT_PRIO:
315  * @TX_STATUS_POSTPONE_QUIET_PERIOD:
316  * @TX_STATUS_POSTPONE_CALC_TTAK:
317  * @TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY:
318  * @TX_STATUS_FAIL_SHORT_LIMIT:
319  * @TX_STATUS_FAIL_LONG_LIMIT:
320  * @TX_STATUS_FAIL_UNDERRUN:
321  * @TX_STATUS_FAIL_DRAIN_FLOW:
322  * @TX_STATUS_FAIL_RFKILL_FLUSH:
323  * @TX_STATUS_FAIL_LIFE_EXPIRE:
324  * @TX_STATUS_FAIL_DEST_PS:
325  * @TX_STATUS_FAIL_HOST_ABORTED:
326  * @TX_STATUS_FAIL_BT_RETRY:
327  * @TX_STATUS_FAIL_STA_INVALID:
328  * @TX_TATUS_FAIL_FRAG_DROPPED:
329  * @TX_STATUS_FAIL_TID_DISABLE:
330  * @TX_STATUS_FAIL_FIFO_FLUSHED:
331  * @TX_STATUS_FAIL_SMALL_CF_POLL:
332  * @TX_STATUS_FAIL_FW_DROP:
333  * @TX_STATUS_FAIL_STA_COLOR_MISMATCH: mismatch between color of Tx cmd and
334  *	STA table
335  * @TX_FRAME_STATUS_INTERNAL_ABORT:
336  * @TX_MODE_MSK:
337  * @TX_MODE_NO_BURST:
338  * @TX_MODE_IN_BURST_SEQ:
339  * @TX_MODE_FIRST_IN_BURST:
340  * @TX_QUEUE_NUM_MSK:
341  *
342  * Valid only if frame_count =1
343  * TODO: complete documentation
344  */
345 enum iwl_tx_status {
346 	TX_STATUS_MSK = 0x000000ff,
347 	TX_STATUS_SUCCESS = 0x01,
348 	TX_STATUS_DIRECT_DONE = 0x02,
349 	/* postpone TX */
350 	TX_STATUS_POSTPONE_DELAY = 0x40,
351 	TX_STATUS_POSTPONE_FEW_BYTES = 0x41,
352 	TX_STATUS_POSTPONE_BT_PRIO = 0x42,
353 	TX_STATUS_POSTPONE_QUIET_PERIOD = 0x43,
354 	TX_STATUS_POSTPONE_CALC_TTAK = 0x44,
355 	/* abort TX */
356 	TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY = 0x81,
357 	TX_STATUS_FAIL_SHORT_LIMIT = 0x82,
358 	TX_STATUS_FAIL_LONG_LIMIT = 0x83,
359 	TX_STATUS_FAIL_UNDERRUN = 0x84,
360 	TX_STATUS_FAIL_DRAIN_FLOW = 0x85,
361 	TX_STATUS_FAIL_RFKILL_FLUSH = 0x86,
362 	TX_STATUS_FAIL_LIFE_EXPIRE = 0x87,
363 	TX_STATUS_FAIL_DEST_PS = 0x88,
364 	TX_STATUS_FAIL_HOST_ABORTED = 0x89,
365 	TX_STATUS_FAIL_BT_RETRY = 0x8a,
366 	TX_STATUS_FAIL_STA_INVALID = 0x8b,
367 	TX_STATUS_FAIL_FRAG_DROPPED = 0x8c,
368 	TX_STATUS_FAIL_TID_DISABLE = 0x8d,
369 	TX_STATUS_FAIL_FIFO_FLUSHED = 0x8e,
370 	TX_STATUS_FAIL_SMALL_CF_POLL = 0x8f,
371 	TX_STATUS_FAIL_FW_DROP = 0x90,
372 	TX_STATUS_FAIL_STA_COLOR_MISMATCH = 0x91,
373 	TX_STATUS_INTERNAL_ABORT = 0x92,
374 	TX_MODE_MSK = 0x00000f00,
375 	TX_MODE_NO_BURST = 0x00000000,
376 	TX_MODE_IN_BURST_SEQ = 0x00000100,
377 	TX_MODE_FIRST_IN_BURST = 0x00000200,
378 	TX_QUEUE_NUM_MSK = 0x0001f000,
379 	TX_NARROW_BW_MSK = 0x00060000,
380 	TX_NARROW_BW_1DIV2 = 0x00020000,
381 	TX_NARROW_BW_1DIV4 = 0x00040000,
382 	TX_NARROW_BW_1DIV8 = 0x00060000,
383 };
384 
385 /*
386  * enum iwl_tx_agg_status - TX aggregation status
387  * @AGG_TX_STATE_STATUS_MSK:
388  * @AGG_TX_STATE_TRANSMITTED:
389  * @AGG_TX_STATE_UNDERRUN:
390  * @AGG_TX_STATE_BT_PRIO:
391  * @AGG_TX_STATE_FEW_BYTES:
392  * @AGG_TX_STATE_ABORT:
393  * @AGG_TX_STATE_TX_ON_AIR_DROP: TX_ON_AIR signal drop without underrun or
394  *	BT detection
395  * @AGG_TX_STATE_LAST_SENT_TRY_CNT:
396  * @AGG_TX_STATE_LAST_SENT_BT_KILL:
397  * @AGG_TX_STATE_SCD_QUERY:
398  * @AGG_TX_STATE_TEST_BAD_CRC32:
399  * @AGG_TX_STATE_RESPONSE:
400  * @AGG_TX_STATE_DUMP_TX:
401  * @AGG_TX_STATE_DELAY_TX:
402  * @AGG_TX_STATE_TRY_CNT_MSK: Retry count for 1st frame in aggregation (retries
403  *	occur if tx failed for this frame when it was a member of a previous
404  *	aggregation block). If rate scaling is used, retry count indicates the
405  *	rate table entry used for all frames in the new agg.
406  * @AGG_TX_STATE_SEQ_NUM_MSK: Command ID and sequence number of Tx command for
407  *	this frame
408  *
409  * TODO: complete documentation
410  */
411 enum iwl_tx_agg_status {
412 	AGG_TX_STATE_STATUS_MSK = 0x00fff,
413 	AGG_TX_STATE_TRANSMITTED = 0x000,
414 	AGG_TX_STATE_UNDERRUN = 0x001,
415 	AGG_TX_STATE_BT_PRIO = 0x002,
416 	AGG_TX_STATE_FEW_BYTES = 0x004,
417 	AGG_TX_STATE_ABORT = 0x008,
418 	AGG_TX_STATE_TX_ON_AIR_DROP = 0x010,
419 	AGG_TX_STATE_LAST_SENT_TRY_CNT = 0x020,
420 	AGG_TX_STATE_LAST_SENT_BT_KILL = 0x040,
421 	AGG_TX_STATE_SCD_QUERY = 0x080,
422 	AGG_TX_STATE_TEST_BAD_CRC32 = 0x0100,
423 	AGG_TX_STATE_RESPONSE = 0x1ff,
424 	AGG_TX_STATE_DUMP_TX = 0x200,
425 	AGG_TX_STATE_DELAY_TX = 0x400,
426 	AGG_TX_STATE_TRY_CNT_POS = 12,
427 	AGG_TX_STATE_TRY_CNT_MSK = 0xf << AGG_TX_STATE_TRY_CNT_POS,
428 };
429 
430 /*
431  * The mask below describes a status where we are absolutely sure that the MPDU
432  * wasn't sent. For BA/Underrun we cannot be that sure. All we know that we've
433  * written the bytes to the TXE, but we know nothing about what the DSP did.
434  */
435 #define AGG_TX_STAT_FRAME_NOT_SENT (AGG_TX_STATE_FEW_BYTES | \
436 				    AGG_TX_STATE_ABORT | \
437 				    AGG_TX_STATE_SCD_QUERY)
438 
439 /*
440  * REPLY_TX = 0x1c (response)
441  *
442  * This response may be in one of two slightly different formats, indicated
443  * by the frame_count field:
444  *
445  * 1)	No aggregation (frame_count == 1).  This reports Tx results for a single
446  *	frame. Multiple attempts, at various bit rates, may have been made for
447  *	this frame.
448  *
449  * 2)	Aggregation (frame_count > 1).  This reports Tx results for two or more
450  *	frames that used block-acknowledge.  All frames were transmitted at
451  *	same rate. Rate scaling may have been used if first frame in this new
452  *	agg block failed in previous agg block(s).
453  *
454  *	Note that, for aggregation, ACK (block-ack) status is not delivered
455  *	here; block-ack has not been received by the time the device records
456  *	this status.
457  *	This status relates to reasons the tx might have been blocked or aborted
458  *	within the device, rather than whether it was received successfully by
459  *	the destination station.
460  */
461 
462 /**
463  * struct agg_tx_status - per packet TX aggregation status
464  * @status: See &enum iwl_tx_agg_status
465  * @sequence: Sequence # for this frame's Tx cmd (not SSN!)
466  */
467 struct agg_tx_status {
468 	__le16 status;
469 	__le16 sequence;
470 } __packed;
471 
472 /*
473  * definitions for initial rate index field
474  * bits [3:0] initial rate index
475  * bits [6:4] rate table color, used for the initial rate
476  * bit-7 invalid rate indication
477  */
478 #define TX_RES_INIT_RATE_INDEX_MSK 0x0f
479 #define TX_RES_RATE_TABLE_COLOR_POS 4
480 #define TX_RES_RATE_TABLE_COLOR_MSK 0x70
481 #define TX_RES_INV_RATE_INDEX_MSK 0x80
482 #define TX_RES_RATE_TABLE_COL_GET(_f) (((_f) & TX_RES_RATE_TABLE_COLOR_MSK) >>\
483 				       TX_RES_RATE_TABLE_COLOR_POS)
484 
485 #define IWL_MVM_TX_RES_GET_TID(_ra_tid) ((_ra_tid) & 0x0f)
486 #define IWL_MVM_TX_RES_GET_RA(_ra_tid) ((_ra_tid) >> 4)
487 
488 /**
489  * struct iwl_tx_resp_v3 - notifies that fw is TXing a packet
490  * ( REPLY_TX = 0x1c )
491  * @frame_count: 1 no aggregation, >1 aggregation
492  * @bt_kill_count: num of times blocked by bluetooth (unused for agg)
493  * @failure_rts: num of failures due to unsuccessful RTS
494  * @failure_frame: num failures due to no ACK (unused for agg)
495  * @initial_rate: for non-agg: rate of the successful Tx. For agg: rate of the
496  *	Tx of all the batch. RATE_MCS_*
497  * @wireless_media_time: for non-agg: RTS + CTS + frame tx attempts time + ACK.
498  *	for agg: RTS + CTS + aggregation tx time + block-ack time.
499  *	in usec.
500  * @pa_status: tx power info
501  * @pa_integ_res_a: tx power info
502  * @pa_integ_res_b: tx power info
503  * @pa_integ_res_c: tx power info
504  * @measurement_req_id: tx power info
505  * @reduced_tpc: transmit power reduction used
506  * @reserved: reserved
507  * @tfd_info: TFD information set by the FH
508  * @seq_ctl: sequence control from the Tx cmd
509  * @byte_cnt: byte count from the Tx cmd
510  * @tlc_info: TLC rate info
511  * @ra_tid: bits [3:0] = ra, bits [7:4] = tid
512  * @frame_ctrl: frame control
513  * @status: for non-agg:  frame status TX_STATUS_*
514  *	for agg: status of 1st frame, AGG_TX_STATE_*; other frame status fields
515  *	follow this one, up to frame_count. Length in @frame_count.
516  *
517  * After the array of statuses comes the SSN of the SCD. Look at
518  * %iwl_mvm_get_scd_ssn for more details.
519  */
520 struct iwl_tx_resp_v3 {
521 	u8 frame_count;
522 	u8 bt_kill_count;
523 	u8 failure_rts;
524 	u8 failure_frame;
525 	__le32 initial_rate;
526 	__le16 wireless_media_time;
527 
528 	u8 pa_status;
529 	u8 pa_integ_res_a[3];
530 	u8 pa_integ_res_b[3];
531 	u8 pa_integ_res_c[3];
532 	__le16 measurement_req_id;
533 	u8 reduced_tpc;
534 	u8 reserved;
535 
536 	__le32 tfd_info;
537 	__le16 seq_ctl;
538 	__le16 byte_cnt;
539 	u8 tlc_info;
540 	u8 ra_tid;
541 	__le16 frame_ctrl;
542 	struct agg_tx_status status[];
543 } __packed; /* TX_RSP_API_S_VER_3 */
544 
545 /**
546  * struct iwl_tx_resp - notifies that fw is TXing a packet
547  * ( REPLY_TX = 0x1c )
548  * @frame_count: 1 no aggregation, >1 aggregation
549  * @bt_kill_count: num of times blocked by bluetooth (unused for agg)
550  * @failure_rts: num of failures due to unsuccessful RTS
551  * @failure_frame: num failures due to no ACK (unused for agg)
552  * @initial_rate: for non-agg: rate of the successful Tx. For agg: rate of the
553  *	Tx of all the batch. RATE_MCS_*
554  * @wireless_media_time: for non-agg: RTS + CTS + frame tx attempts time + ACK.
555  *	for agg: RTS + CTS + aggregation tx time + block-ack time.
556  *	in usec.
557  * @pa_status: tx power info
558  * @pa_integ_res_a: tx power info
559  * @pa_integ_res_b: tx power info
560  * @pa_integ_res_c: tx power info
561  * @measurement_req_id: tx power info
562  * @reduced_tpc: transmit power reduction used
563  * @reserved: reserved
564  * @tfd_info: TFD information set by the FH
565  * @seq_ctl: sequence control from the Tx cmd
566  * @byte_cnt: byte count from the Tx cmd
567  * @tlc_info: TLC rate info
568  * @ra_tid: bits [3:0] = ra, bits [7:4] = tid
569  * @frame_ctrl: frame control
570  * @tx_queue: TX queue for this response
571  * @reserved2: reserved for padding/alignment
572  * @status: for non-agg:  frame status TX_STATUS_*
573  *	For version 6 TX response isn't received for aggregation at all.
574  *
575  * After the array of statuses comes the SSN of the SCD. Look at
576  * %iwl_mvm_get_scd_ssn for more details.
577  */
578 struct iwl_tx_resp {
579 	u8 frame_count;
580 	u8 bt_kill_count;
581 	u8 failure_rts;
582 	u8 failure_frame;
583 	__le32 initial_rate;
584 	__le16 wireless_media_time;
585 
586 	u8 pa_status;
587 	u8 pa_integ_res_a[3];
588 	u8 pa_integ_res_b[3];
589 	u8 pa_integ_res_c[3];
590 	__le16 measurement_req_id;
591 	u8 reduced_tpc;
592 	u8 reserved;
593 
594 	__le32 tfd_info;
595 	__le16 seq_ctl;
596 	__le16 byte_cnt;
597 	u8 tlc_info;
598 	u8 ra_tid;
599 	__le16 frame_ctrl;
600 	__le16 tx_queue;
601 	__le16 reserved2;
602 	struct agg_tx_status status;
603 } __packed; /* TX_RSP_API_S_VER_6,
604 	       TX_RSP_API_S_VER_7 */
605 
606 /**
607  * struct iwl_mvm_ba_notif - notifies about reception of BA
608  * ( BA_NOTIF = 0xc5 )
609  * @sta_addr: MAC address
610  * @reserved: reserved
611  * @sta_id: Index of recipient (BA-sending) station in fw's station table
612  * @tid: tid of the session
613  * @seq_ctl: sequence control field
614  * @bitmap: the bitmap of the BA notification as seen in the air
615  * @scd_flow: the tx queue this BA relates to
616  * @scd_ssn: the index of the last contiguously sent packet
617  * @txed: number of Txed frames in this batch
618  * @txed_2_done: number of Acked frames in this batch
619  * @reduced_txp: power reduced according to TPC. This is the actual value and
620  *	not a copy from the LQ command. Thus, if not the first rate was used
621  *	for Tx-ing then this value will be set to 0 by FW.
622  * @reserved1: reserved
623  */
624 struct iwl_mvm_ba_notif {
625 	u8 sta_addr[ETH_ALEN];
626 	__le16 reserved;
627 
628 	u8 sta_id;
629 	u8 tid;
630 	__le16 seq_ctl;
631 	__le64 bitmap;
632 	__le16 scd_flow;
633 	__le16 scd_ssn;
634 	u8 txed;
635 	u8 txed_2_done;
636 	u8 reduced_txp;
637 	u8 reserved1;
638 } __packed;
639 
640 /**
641  * struct iwl_mvm_compressed_ba_tfd - progress of a TFD queue
642  * @q_num: TFD queue number
643  * @tfd_index: Index of first un-acked frame in the  TFD queue
644  * @scd_queue: For debug only - the physical queue the TFD queue is bound to
645  * @tid: TID of the queue (0-7)
646  * @reserved: reserved for alignment
647  */
648 struct iwl_mvm_compressed_ba_tfd {
649 	__le16 q_num;
650 	__le16 tfd_index;
651 	u8 scd_queue;
652 	u8 tid;
653 	u8 reserved[2];
654 } __packed; /* COMPRESSED_BA_TFD_API_S_VER_1 */
655 
656 /**
657  * struct iwl_mvm_compressed_ba_ratid - progress of a RA TID queue
658  * @q_num: RA TID queue number
659  * @tid: TID of the queue
660  * @ssn: BA window current SSN
661  */
662 struct iwl_mvm_compressed_ba_ratid {
663 	u8 q_num;
664 	u8 tid;
665 	__le16 ssn;
666 } __packed; /* COMPRESSED_BA_RATID_API_S_VER_1 */
667 
668 /*
669  * enum iwl_mvm_ba_resp_flags - TX aggregation status
670  * @IWL_MVM_BA_RESP_TX_AGG: generated due to BA
671  * @IWL_MVM_BA_RESP_TX_BAR: generated due to BA after BAR
672  * @IWL_MVM_BA_RESP_TX_AGG_FAIL: aggregation didn't receive BA
673  * @IWL_MVM_BA_RESP_TX_UNDERRUN: aggregation got underrun
674  * @IWL_MVM_BA_RESP_TX_BT_KILL: aggregation got BT-kill
675  * @IWL_MVM_BA_RESP_TX_DSP_TIMEOUT: aggregation didn't finish within the
676  *	expected time
677  */
678 enum iwl_mvm_ba_resp_flags {
679 	IWL_MVM_BA_RESP_TX_AGG,
680 	IWL_MVM_BA_RESP_TX_BAR,
681 	IWL_MVM_BA_RESP_TX_AGG_FAIL,
682 	IWL_MVM_BA_RESP_TX_UNDERRUN,
683 	IWL_MVM_BA_RESP_TX_BT_KILL,
684 	IWL_MVM_BA_RESP_TX_DSP_TIMEOUT
685 };
686 
687 /**
688  * struct iwl_mvm_compressed_ba_notif - notifies about reception of BA
689  * ( BA_NOTIF = 0xc5 )
690  * @flags: status flag, see the &iwl_mvm_ba_resp_flags
691  * @sta_id: Index of recipient (BA-sending) station in fw's station table
692  * @reduced_txp: power reduced according to TPC. This is the actual value and
693  *	not a copy from the LQ command. Thus, if not the first rate was used
694  *	for Tx-ing then this value will be set to 0 by FW.
695  * @tlc_rate_info: TLC rate info, initial rate index, TLC table color
696  * @retry_cnt: retry count
697  * @query_byte_cnt: SCD query byte count
698  * @query_frame_cnt: SCD query frame count
699  * @txed: number of frames sent in the aggregation (all-TIDs)
700  * @done: number of frames that were Acked by the BA (all-TIDs)
701  * @rts_retry_cnt: RTS retry count
702  * @reserved: reserved (for alignment)
703  * @wireless_time: Wireless-media time
704  * @tx_rate: the rate the aggregation was sent at
705  * @tfd_cnt: number of TFD-Q elements
706  * @ra_tid_cnt: number of RATID-Q elements
707  * @tfd: array of TFD queue status updates. See &iwl_mvm_compressed_ba_tfd
708  *	for details. Length in @tfd_cnt.
709  * @ra_tid: array of RA-TID queue status updates. For debug purposes only. See
710  *	&iwl_mvm_compressed_ba_ratid for more details. Length in @ra_tid_cnt.
711  */
712 struct iwl_mvm_compressed_ba_notif {
713 	__le32 flags;
714 	u8 sta_id;
715 	u8 reduced_txp;
716 	u8 tlc_rate_info;
717 	u8 retry_cnt;
718 	__le32 query_byte_cnt;
719 	__le16 query_frame_cnt;
720 	__le16 txed;
721 	__le16 done;
722 	u8 rts_retry_cnt;
723 	u8 reserved;
724 	__le32 wireless_time;
725 	__le32 tx_rate;
726 	__le16 tfd_cnt;
727 	__le16 ra_tid_cnt;
728 	union {
729 		DECLARE_FLEX_ARRAY(struct iwl_mvm_compressed_ba_ratid, ra_tid);
730 		DECLARE_FLEX_ARRAY(struct iwl_mvm_compressed_ba_tfd, tfd);
731 	};
732 } __packed; /* COMPRESSED_BA_RES_API_S_VER_4,
733 	       COMPRESSED_BA_RES_API_S_VER_5 */
734 
735 /**
736  * struct iwl_mac_beacon_cmd_v6 - beacon template command
737  * @tx: the tx commands associated with the beacon frame
738  * @template_id: currently equal to the mac context id of the coresponding
739  *  mac.
740  * @tim_idx: the offset of the tim IE in the beacon
741  * @tim_size: the length of the tim IE
742  * @frame: the template of the beacon frame
743  */
744 struct iwl_mac_beacon_cmd_v6 {
745 	struct iwl_tx_cmd tx;
746 	__le32 template_id;
747 	__le32 tim_idx;
748 	__le32 tim_size;
749 	struct ieee80211_hdr frame[];
750 } __packed; /* BEACON_TEMPLATE_CMD_API_S_VER_6 */
751 
752 /**
753  * struct iwl_mac_beacon_cmd_v7 - beacon template command with offloaded CSA
754  * @tx: the tx commands associated with the beacon frame
755  * @template_id: currently equal to the mac context id of the coresponding
756  *  mac.
757  * @tim_idx: the offset of the tim IE in the beacon
758  * @tim_size: the length of the tim IE
759  * @ecsa_offset: offset to the ECSA IE if present
760  * @csa_offset: offset to the CSA IE if present
761  * @frame: the template of the beacon frame
762  */
763 struct iwl_mac_beacon_cmd_v7 {
764 	struct iwl_tx_cmd tx;
765 	__le32 template_id;
766 	__le32 tim_idx;
767 	__le32 tim_size;
768 	__le32 ecsa_offset;
769 	__le32 csa_offset;
770 	struct ieee80211_hdr frame[];
771 } __packed; /* BEACON_TEMPLATE_CMD_API_S_VER_7 */
772 
773 /* Bit flags for BEACON_TEMPLATE_CMD_API until version 10 */
774 enum iwl_mac_beacon_flags_v1 {
775 	IWL_MAC_BEACON_CCK_V1	= BIT(8),
776 	IWL_MAC_BEACON_ANT_A_V1 = BIT(9),
777 	IWL_MAC_BEACON_ANT_B_V1 = BIT(10),
778 	IWL_MAC_BEACON_FILS_V1	= BIT(12),
779 };
780 
781 /* Bit flags for BEACON_TEMPLATE_CMD_API version 11 and above */
782 enum iwl_mac_beacon_flags {
783 	IWL_MAC_BEACON_CCK	= BIT(5),
784 	IWL_MAC_BEACON_ANT_A	= BIT(6),
785 	IWL_MAC_BEACON_ANT_B	= BIT(7),
786 	IWL_MAC_BEACON_FILS	= BIT(8),
787 };
788 
789 /**
790  * struct iwl_mac_beacon_cmd - beacon template command with offloaded CSA
791  * @byte_cnt: byte count of the beacon frame.
792  * @flags: least significant byte for rate code. The most significant byte
793  *	is &enum iwl_mac_beacon_flags.
794  * @short_ssid: Short SSID
795  * @reserved: reserved
796  * @link_id: the firmware id of the link that will use this beacon
797  * @tim_idx: the offset of the tim IE in the beacon
798  * @tim_size: the length of the tim IE (version < 14)
799  * @btwt_offset: offset to the broadcast TWT IE if present (version >= 14)
800  * @ecsa_offset: offset to the ECSA IE if present
801  * @csa_offset: offset to the CSA IE if present
802  * @frame: the template of the beacon frame
803  */
804 struct iwl_mac_beacon_cmd {
805 	__le16 byte_cnt;
806 	__le16 flags;
807 	__le32 short_ssid;
808 	__le32 reserved;
809 	__le32 link_id;
810 	__le32 tim_idx;
811 	union {
812 		__le32 tim_size;
813 		__le32 btwt_offset;
814 	};
815 	__le32 ecsa_offset;
816 	__le32 csa_offset;
817 	struct ieee80211_hdr frame[];
818 } __packed; /* BEACON_TEMPLATE_CMD_API_S_VER_10,
819 	     * BEACON_TEMPLATE_CMD_API_S_VER_11,
820 	     * BEACON_TEMPLATE_CMD_API_S_VER_12,
821 	     * BEACON_TEMPLATE_CMD_API_S_VER_13,
822 	     * BEACON_TEMPLATE_CMD_API_S_VER_14
823 	     */
824 
825 struct iwl_beacon_notif {
826 	struct iwl_tx_resp beacon_notify_hdr;
827 	__le64 tsf;
828 	__le32 ibss_mgr_status;
829 } __packed;
830 
831 /**
832  * struct iwl_extended_beacon_notif_v5 - notifies about beacon transmission
833  * @beacon_notify_hdr: tx response command associated with the beacon
834  * @tsf: last beacon tsf
835  * @ibss_mgr_status: whether IBSS is manager
836  * @gp2: last beacon time in gp2
837  */
838 struct iwl_extended_beacon_notif_v5 {
839 	struct iwl_tx_resp beacon_notify_hdr;
840 	__le64 tsf;
841 	__le32 ibss_mgr_status;
842 	__le32 gp2;
843 } __packed; /* BEACON_NTFY_API_S_VER_5 */
844 
845 /**
846  * struct iwl_extended_beacon_notif - notifies about beacon transmission
847  * @status: the status of the Tx response of the beacon
848  * @tsf: last beacon tsf
849  * @ibss_mgr_status: whether IBSS is manager
850  * @gp2: last beacon time in gp2
851  */
852 struct iwl_extended_beacon_notif {
853 	__le32 status;
854 	__le64 tsf;
855 	__le32 ibss_mgr_status;
856 	__le32 gp2;
857 } __packed; /* BEACON_NTFY_API_S_VER_6_ */
858 
859 /**
860  * enum iwl_dump_control - dump (flush) control flags
861  * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the the FIFO is empty
862  *	and the TFD queues are empty.
863  */
864 enum iwl_dump_control {
865 	DUMP_TX_FIFO_FLUSH	= BIT(1),
866 };
867 
868 /**
869  * struct iwl_tx_path_flush_cmd_v1 -- queue/FIFO flush command
870  * @queues_ctl: bitmap of queues to flush
871  * @flush_ctl: control flags
872  * @reserved: reserved
873  */
874 struct iwl_tx_path_flush_cmd_v1 {
875 	__le32 queues_ctl;
876 	__le16 flush_ctl;
877 	__le16 reserved;
878 } __packed; /* TX_PATH_FLUSH_CMD_API_S_VER_1 */
879 
880 /**
881  * struct iwl_tx_path_flush_cmd -- queue/FIFO flush command
882  * @sta_id: station ID to flush
883  * @tid_mask: TID mask to flush
884  * @reserved: reserved
885  */
886 struct iwl_tx_path_flush_cmd {
887 	__le32 sta_id;
888 	__le16 tid_mask;
889 	__le16 reserved;
890 } __packed; /* TX_PATH_FLUSH_CMD_API_S_VER_2 */
891 
892 #define IWL_TX_FLUSH_QUEUE_RSP 16
893 
894 /**
895  * struct iwl_flush_queue_info - virtual flush queue info
896  * @tid: the tid to flush
897  * @queue_num: virtual queue id
898  * @read_before_flush: read pointer before flush
899  * @read_after_flush: read pointer after flush
900  */
901 struct iwl_flush_queue_info {
902 	__le16 tid;
903 	__le16 queue_num;
904 	__le16 read_before_flush;
905 	__le16 read_after_flush;
906 } __packed; /* TFDQ_FLUSH_INFO_API_S_VER_1 */
907 
908 /**
909  * struct iwl_tx_path_flush_cmd_rsp -- queue/FIFO flush command response
910  * @sta_id: the station for which the queue was flushed
911  * @num_flushed_queues: number of queues in queues array
912  * @queues: all flushed queues
913  */
914 struct iwl_tx_path_flush_cmd_rsp {
915 	__le16 sta_id;
916 	__le16 num_flushed_queues;
917 	struct iwl_flush_queue_info queues[IWL_TX_FLUSH_QUEUE_RSP];
918 } __packed; /* TX_PATH_FLUSH_CMD_RSP_API_S_VER_1 */
919 
920 /* Available options for the SCD_QUEUE_CFG HCMD */
921 enum iwl_scd_cfg_actions {
922 	SCD_CFG_DISABLE_QUEUE		= 0x0,
923 	SCD_CFG_ENABLE_QUEUE		= 0x1,
924 	SCD_CFG_UPDATE_QUEUE_TID	= 0x2,
925 };
926 
927 /**
928  * struct iwl_scd_txq_cfg_cmd - New txq hw scheduler config command
929  * @token: unused
930  * @sta_id: station id
931  * @tid: TID
932  * @scd_queue: scheduler queue to confiug
933  * @action: 1 queue enable, 0 queue disable, 2 change txq's tid owner
934  *	Value is one of &enum iwl_scd_cfg_actions options
935  * @aggregate: 1 aggregated queue, 0 otherwise
936  * @tx_fifo: &enum iwl_mvm_tx_fifo
937  * @window: BA window size
938  * @ssn: SSN for the BA agreement
939  * @reserved: reserved
940  */
941 struct iwl_scd_txq_cfg_cmd {
942 	u8 token;
943 	u8 sta_id;
944 	u8 tid;
945 	u8 scd_queue;
946 	u8 action;
947 	u8 aggregate;
948 	u8 tx_fifo;
949 	u8 window;
950 	__le16 ssn;
951 	__le16 reserved;
952 } __packed; /* SCD_QUEUE_CFG_CMD_API_S_VER_1 */
953 
954 /**
955  * struct iwl_scd_txq_cfg_rsp
956  * @token: taken from the command
957  * @sta_id: station id from the command
958  * @tid: tid from the command
959  * @scd_queue: scd_queue from the command
960  */
961 struct iwl_scd_txq_cfg_rsp {
962 	u8 token;
963 	u8 sta_id;
964 	u8 tid;
965 	u8 scd_queue;
966 } __packed; /* SCD_QUEUE_CFG_RSP_API_S_VER_1 */
967 
968 #endif /* __iwl_fw_api_tx_h__ */
969