1 // SPDX-License-Identifier: MIT
2
3 #include <linux/aperture.h>
4 #include <linux/device.h>
5 #include <linux/list.h>
6 #include <linux/mutex.h>
7 #include <linux/pci.h>
8 #include <linux/platform_device.h>
9 #include <linux/slab.h>
10 #include <linux/sysfb.h>
11 #include <linux/types.h>
12 #include <linux/vgaarb.h>
13
14 #include <video/vga.h>
15
16 /**
17 * DOC: overview
18 *
19 * A graphics device might be supported by different drivers, but only one
20 * driver can be active at any given time. Many systems load a generic
21 * graphics drivers, such as EFI-GOP or VESA, early during the boot process.
22 * During later boot stages, they replace the generic driver with a dedicated,
23 * hardware-specific driver. To take over the device, the dedicated driver
24 * first has to remove the generic driver. Aperture functions manage
25 * ownership of framebuffer memory and hand-over between drivers.
26 *
27 * Graphics drivers should call aperture_remove_conflicting_devices()
28 * at the top of their probe function. The function removes any generic
29 * driver that is currently associated with the given framebuffer memory.
30 * An example for a graphics device on the platform bus is shown below.
31 *
32 * .. code-block:: c
33 *
34 * static int example_probe(struct platform_device *pdev)
35 * {
36 * struct resource *mem;
37 * resource_size_t base, size;
38 * int ret;
39 *
40 * mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
41 * if (!mem)
42 * return -ENODEV;
43 * base = mem->start;
44 * size = resource_size(mem);
45 *
46 * ret = aperture_remove_conflicting_devices(base, size, "example");
47 * if (ret)
48 * return ret;
49 *
50 * // Initialize the hardware
51 * ...
52 *
53 * return 0;
54 * }
55 *
56 * static const struct platform_driver example_driver = {
57 * .probe = example_probe,
58 * ...
59 * };
60 *
61 * The given example reads the platform device's I/O-memory range from the
62 * device instance. An active framebuffer will be located within this range.
63 * The call to aperture_remove_conflicting_devices() releases drivers that
64 * have previously claimed ownership of the range and are currently driving
65 * output on the framebuffer. If successful, the new driver can take over
66 * the device.
67 *
68 * While the given example uses a platform device, the aperture helpers work
69 * with every bus that has an addressable framebuffer. In the case of PCI,
70 * device drivers can also call aperture_remove_conflicting_pci_devices() and
71 * let the function detect the apertures automatically. Device drivers without
72 * knowledge of the framebuffer's location can call
73 * aperture_remove_all_conflicting_devices(), which removes all known devices.
74 *
75 * Drivers that are susceptible to being removed by other drivers, such as
76 * generic EFI or VESA drivers, have to register themselves as owners of their
77 * framebuffer apertures. Ownership of the framebuffer memory is achieved
78 * by calling devm_aperture_acquire_for_platform_device(). If successful, the
79 * driver is the owner of the framebuffer range. The function fails if the
80 * framebuffer is already owned by another driver. See below for an example.
81 *
82 * .. code-block:: c
83 *
84 * static int generic_probe(struct platform_device *pdev)
85 * {
86 * struct resource *mem;
87 * resource_size_t base, size;
88 *
89 * mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
90 * if (!mem)
91 * return -ENODEV;
92 * base = mem->start;
93 * size = resource_size(mem);
94 *
95 * ret = devm_aperture_acquire_for_platform_device(pdev, base, size);
96 * if (ret)
97 * return ret;
98 *
99 * // Initialize the hardware
100 * ...
101 *
102 * return 0;
103 * }
104 *
105 * static int generic_remove(struct platform_device *)
106 * {
107 * // Hot-unplug the device
108 * ...
109 *
110 * return 0;
111 * }
112 *
113 * static const struct platform_driver generic_driver = {
114 * .probe = generic_probe,
115 * .remove = generic_remove,
116 * ...
117 * };
118 *
119 * The similar to the previous example, the generic driver claims ownership
120 * of the framebuffer memory from its probe function. This will fail if the
121 * memory range, or parts of it, is already owned by another driver.
122 *
123 * If successful, the generic driver is now subject to forced removal by
124 * another driver. This only works for platform drivers that support hot
125 * unplugging. When a driver calls aperture_remove_conflicting_devices()
126 * et al for the registered framebuffer range, the aperture helpers call
127 * platform_device_unregister() and the generic driver unloads itself. The
128 * generic driver also has to provide a remove function to make this work.
129 * Once hot unplugged from hardware, it may not access the device's
130 * registers, framebuffer memory, ROM, etc afterwards.
131 */
132
133 struct aperture_range {
134 struct device *dev;
135 resource_size_t base;
136 resource_size_t size;
137 struct list_head lh;
138 void (*detach)(struct device *dev);
139 };
140
141 static LIST_HEAD(apertures);
142 static DEFINE_MUTEX(apertures_lock);
143
overlap(resource_size_t base1,resource_size_t end1,resource_size_t base2,resource_size_t end2)144 static bool overlap(resource_size_t base1, resource_size_t end1,
145 resource_size_t base2, resource_size_t end2)
146 {
147 return (base1 < end2) && (end1 > base2);
148 }
149
devm_aperture_acquire_release(void * data)150 static void devm_aperture_acquire_release(void *data)
151 {
152 struct aperture_range *ap = data;
153 bool detached = !ap->dev;
154
155 if (detached)
156 return;
157
158 mutex_lock(&apertures_lock);
159 list_del(&ap->lh);
160 mutex_unlock(&apertures_lock);
161 }
162
devm_aperture_acquire(struct device * dev,resource_size_t base,resource_size_t size,void (* detach)(struct device *))163 static int devm_aperture_acquire(struct device *dev,
164 resource_size_t base, resource_size_t size,
165 void (*detach)(struct device *))
166 {
167 size_t end = base + size;
168 struct list_head *pos;
169 struct aperture_range *ap;
170
171 mutex_lock(&apertures_lock);
172
173 list_for_each(pos, &apertures) {
174 ap = container_of(pos, struct aperture_range, lh);
175 if (overlap(base, end, ap->base, ap->base + ap->size)) {
176 mutex_unlock(&apertures_lock);
177 return -EBUSY;
178 }
179 }
180
181 ap = devm_kzalloc(dev, sizeof(*ap), GFP_KERNEL);
182 if (!ap) {
183 mutex_unlock(&apertures_lock);
184 return -ENOMEM;
185 }
186
187 ap->dev = dev;
188 ap->base = base;
189 ap->size = size;
190 ap->detach = detach;
191 INIT_LIST_HEAD(&ap->lh);
192
193 list_add(&ap->lh, &apertures);
194
195 mutex_unlock(&apertures_lock);
196
197 return devm_add_action_or_reset(dev, devm_aperture_acquire_release, ap);
198 }
199
aperture_detach_platform_device(struct device * dev)200 static void aperture_detach_platform_device(struct device *dev)
201 {
202 struct platform_device *pdev = to_platform_device(dev);
203
204 /*
205 * Remove the device from the device hierarchy. This is the right thing
206 * to do for firmware-based fb drivers, such as EFI, VESA or VGA. After
207 * the new driver takes over the hardware, the firmware device's state
208 * will be lost.
209 *
210 * For non-platform devices, a new callback would be required.
211 *
212 * If the aperture helpers ever need to handle native drivers, this call
213 * would only have to unplug the DRM device, so that the hardware device
214 * stays around after detachment.
215 */
216 platform_device_unregister(pdev);
217 }
218
219 /**
220 * devm_aperture_acquire_for_platform_device - Acquires ownership of an aperture
221 * on behalf of a platform device.
222 * @pdev: the platform device to own the aperture
223 * @base: the aperture's byte offset in physical memory
224 * @size: the aperture size in bytes
225 *
226 * Installs the given device as the new owner of the aperture. The function
227 * expects the aperture to be provided by a platform device. If another
228 * driver takes over ownership of the aperture, aperture helpers will then
229 * unregister the platform device automatically. All acquired apertures are
230 * released automatically when the underlying device goes away.
231 *
232 * The function fails if the aperture, or parts of it, is currently
233 * owned by another device. To evict current owners, callers should use
234 * remove_conflicting_devices() et al. before calling this function.
235 *
236 * Returns:
237 * 0 on success, or a negative errno value otherwise.
238 */
devm_aperture_acquire_for_platform_device(struct platform_device * pdev,resource_size_t base,resource_size_t size)239 int devm_aperture_acquire_for_platform_device(struct platform_device *pdev,
240 resource_size_t base,
241 resource_size_t size)
242 {
243 return devm_aperture_acquire(&pdev->dev, base, size, aperture_detach_platform_device);
244 }
245 EXPORT_SYMBOL(devm_aperture_acquire_for_platform_device);
246
aperture_detach_devices(resource_size_t base,resource_size_t size)247 static void aperture_detach_devices(resource_size_t base, resource_size_t size)
248 {
249 resource_size_t end = base + size;
250 struct list_head *pos, *n;
251
252 mutex_lock(&apertures_lock);
253
254 list_for_each_safe(pos, n, &apertures) {
255 struct aperture_range *ap = container_of(pos, struct aperture_range, lh);
256 struct device *dev = ap->dev;
257
258 if (WARN_ON_ONCE(!dev))
259 continue;
260
261 if (!overlap(base, end, ap->base, ap->base + ap->size))
262 continue;
263
264 ap->dev = NULL; /* detach from device */
265 list_del(&ap->lh);
266
267 ap->detach(dev);
268 }
269
270 mutex_unlock(&apertures_lock);
271 }
272
273 /**
274 * aperture_remove_conflicting_devices - remove devices in the given range
275 * @base: the aperture's base address in physical memory
276 * @size: aperture size in bytes
277 * @name: a descriptive name of the requesting driver
278 *
279 * This function removes devices that own apertures within @base and @size.
280 *
281 * Returns:
282 * 0 on success, or a negative errno code otherwise
283 */
aperture_remove_conflicting_devices(resource_size_t base,resource_size_t size,const char * name)284 int aperture_remove_conflicting_devices(resource_size_t base, resource_size_t size,
285 const char *name)
286 {
287 /*
288 * If a driver asked to unregister a platform device registered by
289 * sysfb, then can be assumed that this is a driver for a display
290 * that is set up by the system firmware and has a generic driver.
291 *
292 * Drivers for devices that don't have a generic driver will never
293 * ask for this, so let's assume that a real driver for the display
294 * was already probed and prevent sysfb to register devices later.
295 */
296 sysfb_disable(NULL);
297
298 aperture_detach_devices(base, size);
299
300 return 0;
301 }
302 EXPORT_SYMBOL(aperture_remove_conflicting_devices);
303
304 /**
305 * __aperture_remove_legacy_vga_devices - remove legacy VGA devices of a PCI devices
306 * @pdev: PCI device
307 *
308 * This function removes VGA devices provided by @pdev, such as a VGA
309 * framebuffer or a console. This is useful if you have a VGA-compatible
310 * PCI graphics device with framebuffers in non-BAR locations. Drivers
311 * should acquire ownership of those memory areas and afterwards call
312 * this helper to release remaining VGA devices.
313 *
314 * If your hardware has its framebuffers accessible via PCI BARS, use
315 * aperture_remove_conflicting_pci_devices() instead. The function will
316 * release any VGA devices automatically.
317 *
318 * WARNING: Apparently we must remove graphics drivers before calling
319 * this helper. Otherwise the vga fbdev driver falls over if
320 * we have vgacon configured.
321 *
322 * Returns:
323 * 0 on success, or a negative errno code otherwise
324 */
__aperture_remove_legacy_vga_devices(struct pci_dev * pdev)325 int __aperture_remove_legacy_vga_devices(struct pci_dev *pdev)
326 {
327 /* VGA framebuffer */
328 aperture_detach_devices(VGA_FB_PHYS_BASE, VGA_FB_PHYS_SIZE);
329
330 /* VGA textmode console */
331 return vga_remove_vgacon(pdev);
332 }
333 EXPORT_SYMBOL(__aperture_remove_legacy_vga_devices);
334
335 /**
336 * aperture_remove_conflicting_pci_devices - remove existing framebuffers for PCI devices
337 * @pdev: PCI device
338 * @name: a descriptive name of the requesting driver
339 *
340 * This function removes devices that own apertures within any of @pdev's
341 * memory bars. The function assumes that PCI device with shadowed ROM
342 * drives a primary display and therefore kicks out vga16fb as well.
343 *
344 * Returns:
345 * 0 on success, or a negative errno code otherwise
346 */
aperture_remove_conflicting_pci_devices(struct pci_dev * pdev,const char * name)347 int aperture_remove_conflicting_pci_devices(struct pci_dev *pdev, const char *name)
348 {
349 resource_size_t base, size;
350 int bar, ret = 0;
351
352 sysfb_disable(&pdev->dev);
353
354 for (bar = 0; bar < PCI_STD_NUM_BARS; ++bar) {
355 if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM))
356 continue;
357
358 base = pci_resource_start(pdev, bar);
359 size = pci_resource_len(pdev, bar);
360 aperture_detach_devices(base, size);
361 }
362
363 /*
364 * If this is the primary adapter, there could be a VGA device
365 * that consumes the VGA framebuffer I/O range. Remove this
366 * device as well.
367 */
368 if (pdev == vga_default_device())
369 ret = __aperture_remove_legacy_vga_devices(pdev);
370
371 return ret;
372
373 }
374 EXPORT_SYMBOL(aperture_remove_conflicting_pci_devices);
375