1 // SPDX-License-Identifier: GPL-2.0
2 // Copyright (c) 2022 Nuvoton Technology Corporation
3
4 #include <linux/bcd.h>
5 #include <linux/clk-provider.h>
6 #include <linux/err.h>
7 #include <linux/i2c.h>
8 #include <linux/module.h>
9 #include <linux/of.h>
10 #include <linux/rtc.h>
11 #include <linux/slab.h>
12
13 #define NCT3018Y_REG_SC 0x00 /* seconds */
14 #define NCT3018Y_REG_SCA 0x01 /* alarm */
15 #define NCT3018Y_REG_MN 0x02
16 #define NCT3018Y_REG_MNA 0x03 /* alarm */
17 #define NCT3018Y_REG_HR 0x04
18 #define NCT3018Y_REG_HRA 0x05 /* alarm */
19 #define NCT3018Y_REG_DW 0x06
20 #define NCT3018Y_REG_DM 0x07
21 #define NCT3018Y_REG_MO 0x08
22 #define NCT3018Y_REG_YR 0x09
23 #define NCT3018Y_REG_CTRL 0x0A /* timer control */
24 #define NCT3018Y_REG_ST 0x0B /* status */
25 #define NCT3018Y_REG_CLKO 0x0C /* clock out */
26 #define NCT3018Y_REG_PART 0x21 /* part info */
27
28 #define NCT3018Y_BIT_AF BIT(7)
29 #define NCT3018Y_BIT_ST BIT(7)
30 #define NCT3018Y_BIT_DM BIT(6)
31 #define NCT3018Y_BIT_HF BIT(5)
32 #define NCT3018Y_BIT_DSM BIT(4)
33 #define NCT3018Y_BIT_AIE BIT(3)
34 #define NCT3018Y_BIT_OFIE BIT(2)
35 #define NCT3018Y_BIT_CIE BIT(1)
36 #define NCT3018Y_BIT_TWO BIT(0)
37
38 #define NCT3018Y_REG_BAT_MASK 0x07
39 #define NCT3018Y_REG_CLKO_F_MASK 0x03 /* frequenc mask */
40 #define NCT3018Y_REG_CLKO_CKE 0x80 /* clock out enabled */
41 #define NCT3018Y_REG_PART_NCT3018Y 0x02
42
43 struct nct3018y {
44 struct rtc_device *rtc;
45 struct i2c_client *client;
46 int part_num;
47 #ifdef CONFIG_COMMON_CLK
48 struct clk_hw clkout_hw;
49 #endif
50 };
51
nct3018y_set_alarm_mode(struct i2c_client * client,bool on)52 static int nct3018y_set_alarm_mode(struct i2c_client *client, bool on)
53 {
54 int err, flags;
55
56 dev_dbg(&client->dev, "%s:on:%d\n", __func__, on);
57
58 flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CTRL);
59 if (flags < 0) {
60 dev_dbg(&client->dev,
61 "Failed to read NCT3018Y_REG_CTRL\n");
62 return flags;
63 }
64
65 if (on)
66 flags |= NCT3018Y_BIT_AIE;
67 else
68 flags &= ~NCT3018Y_BIT_AIE;
69
70 flags |= NCT3018Y_BIT_CIE;
71 err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_CTRL, flags);
72 if (err < 0) {
73 dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_CTRL\n");
74 return err;
75 }
76
77 flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_ST);
78 if (flags < 0) {
79 dev_dbg(&client->dev,
80 "Failed to read NCT3018Y_REG_ST\n");
81 return flags;
82 }
83
84 flags &= ~(NCT3018Y_BIT_AF);
85 err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_ST, flags);
86 if (err < 0) {
87 dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_ST\n");
88 return err;
89 }
90
91 return 0;
92 }
93
nct3018y_get_alarm_mode(struct i2c_client * client,unsigned char * alarm_enable,unsigned char * alarm_flag)94 static int nct3018y_get_alarm_mode(struct i2c_client *client, unsigned char *alarm_enable,
95 unsigned char *alarm_flag)
96 {
97 int flags;
98
99 if (alarm_enable) {
100 dev_dbg(&client->dev, "%s:NCT3018Y_REG_CTRL\n", __func__);
101 flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CTRL);
102 if (flags < 0)
103 return flags;
104 *alarm_enable = flags & NCT3018Y_BIT_AIE;
105 dev_dbg(&client->dev, "%s:alarm_enable:%x\n", __func__, *alarm_enable);
106
107 }
108
109 if (alarm_flag) {
110 dev_dbg(&client->dev, "%s:NCT3018Y_REG_ST\n", __func__);
111 flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_ST);
112 if (flags < 0)
113 return flags;
114 *alarm_flag = flags & NCT3018Y_BIT_AF;
115 dev_dbg(&client->dev, "%s:alarm_flag:%x\n", __func__, *alarm_flag);
116 }
117
118 return 0;
119 }
120
nct3018y_irq(int irq,void * dev_id)121 static irqreturn_t nct3018y_irq(int irq, void *dev_id)
122 {
123 struct nct3018y *nct3018y = i2c_get_clientdata(dev_id);
124 struct i2c_client *client = nct3018y->client;
125 int err;
126 unsigned char alarm_flag;
127 unsigned char alarm_enable;
128
129 dev_dbg(&client->dev, "%s:irq:%d\n", __func__, irq);
130 err = nct3018y_get_alarm_mode(nct3018y->client, &alarm_enable, &alarm_flag);
131 if (err)
132 return IRQ_NONE;
133
134 if (alarm_flag) {
135 dev_dbg(&client->dev, "%s:alarm flag:%x\n",
136 __func__, alarm_flag);
137 rtc_update_irq(nct3018y->rtc, 1, RTC_IRQF | RTC_AF);
138 nct3018y_set_alarm_mode(nct3018y->client, 0);
139 dev_dbg(&client->dev, "%s:IRQ_HANDLED\n", __func__);
140 return IRQ_HANDLED;
141 }
142
143 return IRQ_NONE;
144 }
145
146 /*
147 * In the routines that deal directly with the nct3018y hardware, we use
148 * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
149 */
nct3018y_rtc_read_time(struct device * dev,struct rtc_time * tm)150 static int nct3018y_rtc_read_time(struct device *dev, struct rtc_time *tm)
151 {
152 struct i2c_client *client = to_i2c_client(dev);
153 unsigned char buf[10];
154 int err;
155
156 err = i2c_smbus_read_i2c_block_data(client, NCT3018Y_REG_ST, 1, buf);
157 if (err < 0)
158 return err;
159
160 if (!buf[0]) {
161 dev_dbg(&client->dev, " voltage <=1.7, date/time is not reliable.\n");
162 return -EINVAL;
163 }
164
165 err = i2c_smbus_read_i2c_block_data(client, NCT3018Y_REG_SC, sizeof(buf), buf);
166 if (err < 0)
167 return err;
168
169 tm->tm_sec = bcd2bin(buf[0] & 0x7F);
170 tm->tm_min = bcd2bin(buf[2] & 0x7F);
171 tm->tm_hour = bcd2bin(buf[4] & 0x3F);
172 tm->tm_wday = buf[6] & 0x07;
173 tm->tm_mday = bcd2bin(buf[7] & 0x3F);
174 tm->tm_mon = bcd2bin(buf[8] & 0x1F) - 1;
175 tm->tm_year = bcd2bin(buf[9]) + 100;
176
177 return 0;
178 }
179
nct3018y_rtc_set_time(struct device * dev,struct rtc_time * tm)180 static int nct3018y_rtc_set_time(struct device *dev, struct rtc_time *tm)
181 {
182 struct i2c_client *client = to_i2c_client(dev);
183 struct nct3018y *nct3018y = dev_get_drvdata(dev);
184 unsigned char buf[4] = {0};
185 int err, flags;
186 int restore_flags = 0;
187
188 flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CTRL);
189 if (flags < 0) {
190 dev_dbg(&client->dev, "Failed to read NCT3018Y_REG_CTRL.\n");
191 return flags;
192 }
193
194 /* Check and set TWO bit */
195 if (nct3018y->part_num == NCT3018Y_REG_PART_NCT3018Y && !(flags & NCT3018Y_BIT_TWO)) {
196 restore_flags = 1;
197 flags |= NCT3018Y_BIT_TWO;
198 err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_CTRL, flags);
199 if (err < 0) {
200 dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_CTRL.\n");
201 return err;
202 }
203 }
204
205 buf[0] = bin2bcd(tm->tm_sec);
206 err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_SC, buf[0]);
207 if (err < 0) {
208 dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_SC\n");
209 return err;
210 }
211
212 buf[0] = bin2bcd(tm->tm_min);
213 err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_MN, buf[0]);
214 if (err < 0) {
215 dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_MN\n");
216 return err;
217 }
218
219 buf[0] = bin2bcd(tm->tm_hour);
220 err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_HR, buf[0]);
221 if (err < 0) {
222 dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_HR\n");
223 return err;
224 }
225
226 buf[0] = tm->tm_wday & 0x07;
227 buf[1] = bin2bcd(tm->tm_mday);
228 buf[2] = bin2bcd(tm->tm_mon + 1);
229 buf[3] = bin2bcd(tm->tm_year - 100);
230 err = i2c_smbus_write_i2c_block_data(client, NCT3018Y_REG_DW,
231 sizeof(buf), buf);
232 if (err < 0) {
233 dev_dbg(&client->dev, "Unable to write for day and mon and year\n");
234 return -EIO;
235 }
236
237 /* Restore TWO bit */
238 if (restore_flags) {
239 if (nct3018y->part_num == NCT3018Y_REG_PART_NCT3018Y)
240 flags &= ~NCT3018Y_BIT_TWO;
241
242 err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_CTRL, flags);
243 if (err < 0) {
244 dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_CTRL.\n");
245 return err;
246 }
247 }
248
249 return err;
250 }
251
nct3018y_rtc_read_alarm(struct device * dev,struct rtc_wkalrm * tm)252 static int nct3018y_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *tm)
253 {
254 struct i2c_client *client = to_i2c_client(dev);
255 unsigned char buf[5];
256 int err;
257
258 err = i2c_smbus_read_i2c_block_data(client, NCT3018Y_REG_SCA,
259 sizeof(buf), buf);
260 if (err < 0) {
261 dev_dbg(&client->dev, "Unable to read date\n");
262 return -EIO;
263 }
264
265 dev_dbg(&client->dev, "%s: raw data is sec=%02x, min=%02x hr=%02x\n",
266 __func__, buf[0], buf[2], buf[4]);
267
268 tm->time.tm_sec = bcd2bin(buf[0] & 0x7F);
269 tm->time.tm_min = bcd2bin(buf[2] & 0x7F);
270 tm->time.tm_hour = bcd2bin(buf[4] & 0x3F);
271
272 err = nct3018y_get_alarm_mode(client, &tm->enabled, &tm->pending);
273 if (err < 0)
274 return err;
275
276 dev_dbg(&client->dev, "%s:s=%d m=%d, hr=%d, enabled=%d, pending=%d\n",
277 __func__, tm->time.tm_sec, tm->time.tm_min,
278 tm->time.tm_hour, tm->enabled, tm->pending);
279
280 return 0;
281 }
282
nct3018y_rtc_set_alarm(struct device * dev,struct rtc_wkalrm * tm)283 static int nct3018y_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *tm)
284 {
285 struct i2c_client *client = to_i2c_client(dev);
286 int err;
287
288 dev_dbg(dev, "%s, sec=%d, min=%d hour=%d tm->enabled:%d\n",
289 __func__, tm->time.tm_sec, tm->time.tm_min, tm->time.tm_hour,
290 tm->enabled);
291
292 err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_SCA, bin2bcd(tm->time.tm_sec));
293 if (err < 0) {
294 dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_SCA\n");
295 return err;
296 }
297
298 err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_MNA, bin2bcd(tm->time.tm_min));
299 if (err < 0) {
300 dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_MNA\n");
301 return err;
302 }
303
304 err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_HRA, bin2bcd(tm->time.tm_hour));
305 if (err < 0) {
306 dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_HRA\n");
307 return err;
308 }
309
310 return nct3018y_set_alarm_mode(client, tm->enabled);
311 }
312
nct3018y_irq_enable(struct device * dev,unsigned int enabled)313 static int nct3018y_irq_enable(struct device *dev, unsigned int enabled)
314 {
315 dev_dbg(dev, "%s: alarm enable=%d\n", __func__, enabled);
316
317 return nct3018y_set_alarm_mode(to_i2c_client(dev), enabled);
318 }
319
nct3018y_ioctl(struct device * dev,unsigned int cmd,unsigned long arg)320 static int nct3018y_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
321 {
322 struct i2c_client *client = to_i2c_client(dev);
323 int status, flags = 0;
324
325 switch (cmd) {
326 case RTC_VL_READ:
327 status = i2c_smbus_read_byte_data(client, NCT3018Y_REG_ST);
328 if (status < 0)
329 return status;
330
331 if (!(status & NCT3018Y_REG_BAT_MASK))
332 flags |= RTC_VL_DATA_INVALID;
333
334 return put_user(flags, (unsigned int __user *)arg);
335
336 default:
337 return -ENOIOCTLCMD;
338 }
339 }
340
341 #ifdef CONFIG_COMMON_CLK
342 /*
343 * Handling of the clkout
344 */
345
346 #define clkout_hw_to_nct3018y(_hw) container_of(_hw, struct nct3018y, clkout_hw)
347
348 static const int clkout_rates[] = {
349 32768,
350 1024,
351 32,
352 1,
353 };
354
nct3018y_clkout_recalc_rate(struct clk_hw * hw,unsigned long parent_rate)355 static unsigned long nct3018y_clkout_recalc_rate(struct clk_hw *hw,
356 unsigned long parent_rate)
357 {
358 struct nct3018y *nct3018y = clkout_hw_to_nct3018y(hw);
359 struct i2c_client *client = nct3018y->client;
360 int flags;
361
362 flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CLKO);
363 if (flags < 0)
364 return 0;
365
366 flags &= NCT3018Y_REG_CLKO_F_MASK;
367 return clkout_rates[flags];
368 }
369
nct3018y_clkout_round_rate(struct clk_hw * hw,unsigned long rate,unsigned long * prate)370 static long nct3018y_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
371 unsigned long *prate)
372 {
373 int i;
374
375 for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
376 if (clkout_rates[i] <= rate)
377 return clkout_rates[i];
378
379 return 0;
380 }
381
nct3018y_clkout_set_rate(struct clk_hw * hw,unsigned long rate,unsigned long parent_rate)382 static int nct3018y_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
383 unsigned long parent_rate)
384 {
385 struct nct3018y *nct3018y = clkout_hw_to_nct3018y(hw);
386 struct i2c_client *client = nct3018y->client;
387 int i, flags;
388
389 flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CLKO);
390 if (flags < 0)
391 return flags;
392
393 for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
394 if (clkout_rates[i] == rate) {
395 flags &= ~NCT3018Y_REG_CLKO_F_MASK;
396 flags |= i;
397 return i2c_smbus_write_byte_data(client, NCT3018Y_REG_CLKO, flags);
398 }
399
400 return -EINVAL;
401 }
402
nct3018y_clkout_control(struct clk_hw * hw,bool enable)403 static int nct3018y_clkout_control(struct clk_hw *hw, bool enable)
404 {
405 struct nct3018y *nct3018y = clkout_hw_to_nct3018y(hw);
406 struct i2c_client *client = nct3018y->client;
407 int flags;
408
409 flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CLKO);
410 if (flags < 0)
411 return flags;
412
413 if (enable)
414 flags |= NCT3018Y_REG_CLKO_CKE;
415 else
416 flags &= ~NCT3018Y_REG_CLKO_CKE;
417
418 return i2c_smbus_write_byte_data(client, NCT3018Y_REG_CLKO, flags);
419 }
420
nct3018y_clkout_prepare(struct clk_hw * hw)421 static int nct3018y_clkout_prepare(struct clk_hw *hw)
422 {
423 return nct3018y_clkout_control(hw, 1);
424 }
425
nct3018y_clkout_unprepare(struct clk_hw * hw)426 static void nct3018y_clkout_unprepare(struct clk_hw *hw)
427 {
428 nct3018y_clkout_control(hw, 0);
429 }
430
nct3018y_clkout_is_prepared(struct clk_hw * hw)431 static int nct3018y_clkout_is_prepared(struct clk_hw *hw)
432 {
433 struct nct3018y *nct3018y = clkout_hw_to_nct3018y(hw);
434 struct i2c_client *client = nct3018y->client;
435 int flags;
436
437 flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CLKO);
438 if (flags < 0)
439 return flags;
440
441 return flags & NCT3018Y_REG_CLKO_CKE;
442 }
443
444 static const struct clk_ops nct3018y_clkout_ops = {
445 .prepare = nct3018y_clkout_prepare,
446 .unprepare = nct3018y_clkout_unprepare,
447 .is_prepared = nct3018y_clkout_is_prepared,
448 .recalc_rate = nct3018y_clkout_recalc_rate,
449 .round_rate = nct3018y_clkout_round_rate,
450 .set_rate = nct3018y_clkout_set_rate,
451 };
452
nct3018y_clkout_register_clk(struct nct3018y * nct3018y)453 static struct clk *nct3018y_clkout_register_clk(struct nct3018y *nct3018y)
454 {
455 struct i2c_client *client = nct3018y->client;
456 struct device_node *node = client->dev.of_node;
457 struct clk *clk;
458 struct clk_init_data init;
459
460 init.name = "nct3018y-clkout";
461 init.ops = &nct3018y_clkout_ops;
462 init.flags = 0;
463 init.parent_names = NULL;
464 init.num_parents = 0;
465 nct3018y->clkout_hw.init = &init;
466
467 /* optional override of the clockname */
468 of_property_read_string(node, "clock-output-names", &init.name);
469
470 /* register the clock */
471 clk = devm_clk_register(&client->dev, &nct3018y->clkout_hw);
472
473 if (!IS_ERR(clk))
474 of_clk_add_provider(node, of_clk_src_simple_get, clk);
475
476 return clk;
477 }
478 #endif
479
480 static const struct rtc_class_ops nct3018y_rtc_ops = {
481 .read_time = nct3018y_rtc_read_time,
482 .set_time = nct3018y_rtc_set_time,
483 .read_alarm = nct3018y_rtc_read_alarm,
484 .set_alarm = nct3018y_rtc_set_alarm,
485 .alarm_irq_enable = nct3018y_irq_enable,
486 .ioctl = nct3018y_ioctl,
487 };
488
nct3018y_probe(struct i2c_client * client)489 static int nct3018y_probe(struct i2c_client *client)
490 {
491 struct nct3018y *nct3018y;
492 int err, flags;
493
494 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
495 I2C_FUNC_SMBUS_BYTE |
496 I2C_FUNC_SMBUS_BLOCK_DATA))
497 return -ENODEV;
498
499 nct3018y = devm_kzalloc(&client->dev, sizeof(struct nct3018y),
500 GFP_KERNEL);
501 if (!nct3018y)
502 return -ENOMEM;
503
504 i2c_set_clientdata(client, nct3018y);
505 nct3018y->client = client;
506 device_set_wakeup_capable(&client->dev, 1);
507
508 flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CTRL);
509 if (flags < 0) {
510 dev_dbg(&client->dev, "%s: read error\n", __func__);
511 return flags;
512 } else if (flags & NCT3018Y_BIT_TWO) {
513 dev_dbg(&client->dev, "%s: NCT3018Y_BIT_TWO is set\n", __func__);
514 }
515
516 nct3018y->part_num = i2c_smbus_read_byte_data(client, NCT3018Y_REG_PART);
517 if (nct3018y->part_num < 0) {
518 dev_dbg(&client->dev, "Failed to read NCT3018Y_REG_PART.\n");
519 return nct3018y->part_num;
520 } else {
521 nct3018y->part_num &= 0x03; /* Part number is corresponding to bit 0 and 1 */
522 if (nct3018y->part_num == NCT3018Y_REG_PART_NCT3018Y) {
523 flags = NCT3018Y_BIT_HF;
524 err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_CTRL, flags);
525 if (err < 0) {
526 dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_CTRL.\n");
527 return err;
528 }
529 }
530 }
531
532 flags = 0;
533 err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_ST, flags);
534 if (err < 0) {
535 dev_dbg(&client->dev, "%s: write error\n", __func__);
536 return err;
537 }
538
539 nct3018y->rtc = devm_rtc_allocate_device(&client->dev);
540 if (IS_ERR(nct3018y->rtc))
541 return PTR_ERR(nct3018y->rtc);
542
543 nct3018y->rtc->ops = &nct3018y_rtc_ops;
544 nct3018y->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
545 nct3018y->rtc->range_max = RTC_TIMESTAMP_END_2099;
546
547 if (client->irq > 0) {
548 err = devm_request_threaded_irq(&client->dev, client->irq,
549 NULL, nct3018y_irq,
550 IRQF_ONESHOT | IRQF_TRIGGER_FALLING,
551 "nct3018y", client);
552 if (err) {
553 dev_dbg(&client->dev, "unable to request IRQ %d\n", client->irq);
554 return err;
555 }
556 } else {
557 clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, nct3018y->rtc->features);
558 clear_bit(RTC_FEATURE_ALARM, nct3018y->rtc->features);
559 }
560
561 #ifdef CONFIG_COMMON_CLK
562 /* register clk in common clk framework */
563 nct3018y_clkout_register_clk(nct3018y);
564 #endif
565
566 return devm_rtc_register_device(nct3018y->rtc);
567 }
568
569 static const struct i2c_device_id nct3018y_id[] = {
570 { "nct3018y" },
571 { }
572 };
573 MODULE_DEVICE_TABLE(i2c, nct3018y_id);
574
575 static const struct of_device_id nct3018y_of_match[] = {
576 { .compatible = "nuvoton,nct3018y" },
577 {}
578 };
579 MODULE_DEVICE_TABLE(of, nct3018y_of_match);
580
581 static struct i2c_driver nct3018y_driver = {
582 .driver = {
583 .name = "rtc-nct3018y",
584 .of_match_table = nct3018y_of_match,
585 },
586 .probe = nct3018y_probe,
587 .id_table = nct3018y_id,
588 };
589
590 module_i2c_driver(nct3018y_driver);
591
592 MODULE_AUTHOR("Medad CChien <ctcchien@nuvoton.com>");
593 MODULE_AUTHOR("Mia Lin <mimi05633@gmail.com>");
594 MODULE_DESCRIPTION("Nuvoton NCT3018Y RTC driver");
595 MODULE_LICENSE("GPL");
596