/linux-6.12.1/Documentation/devicetree/bindings/rtc/ |
D | nvidia,tegra20-rtc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/rtc/nvidia,tegra20-rtc.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: NVIDIA Tegra real-time clock 10 - Thierry Reding <thierry.reding@gmail.com> 11 - Jon Hunter <jonathanh@nvidia.com> 14 The Tegra RTC maintains seconds and milliseconds counters, and five 16 from low-power state. 21 - const: nvidia,tegra20-rtc [all …]
|
/linux-6.12.1/Documentation/devicetree/bindings/regulator/ |
D | nvidia,tegra-regulators-coupling.txt | 4 NVIDIA Tegra SoC's have a mandatory voltage-coupling between regulators. 5 Thus on Tegra20 there are 3 coupled regulators and on NVIDIA Tegra30 8 Tegra20 voltage coupling 9 ------------------------ 11 On Tegra20 SoC's there are 3 coupled regulators: CORE, RTC and CPU. 12 The CORE and RTC voltages shall be in a range of 170mV from each other 16 ------------------------ 24 - nvidia,tegra-core-regulator: Boolean property that designates regulator 26 - nvidia,tegra-rtc-regulator: Boolean property that designates regulator 27 as the "RTC domain" voltage regulator. [all …]
|
/linux-6.12.1/drivers/clocksource/ |
D | timer-tegra.c | 1 // SPDX-License-Identifier: GPL-2.0-only 9 #define pr_fmt(fmt) "tegra-timer: " fmt 24 #include "timer-of.h" 68 writel_relaxed(TIMER_PTV_EN | (cycles - 1), reg_base + TIMER_PTV); in tegra_timer_set_next_event() 87 writel_relaxed(TIMER_PTV_EN | TIMER_PTV_PER | (period - 1), in tegra_timer_set_periodic() 99 evt->event_handler(evt); in tegra_timer_isr() 139 irq_force_affinity(to->clkevt.irq, cpumask_of(cpu)); in tegra_timer_setup() 140 enable_irq(to->clkevt.irq); in tegra_timer_setup() 150 clockevents_config_and_register(&to->clkevt, timer_of_rate(to), in tegra_timer_setup() 161 to->clkevt.set_state_shutdown(&to->clkevt); in tegra_timer_stop() [all …]
|
/linux-6.12.1/drivers/soc/tegra/ |
D | regulators-tegra20.c | 1 // SPDX-License-Identifier: GPL-2.0+ 3 * Voltage regulators coupler for NVIDIA Tegra20 4 * Copyright (C) 2019 GRATE-DRIVER project 7 * Copyright (C) 2010-2011 NVIDIA Corporation 10 #define pr_fmt(fmt) "tegra voltage-coupler: " fmt 53 * Tegra20 SoC has critical DVFS-capable devices that are in tegra20_core_limit() 54 * permanently-active or active at a boot time, like EMC in tegra20_core_limit() 60 * the state of all DVFS-critical CORE devices is synced. in tegra20_core_limit() 62 if (tegra_pmc_core_domain_state_synced() && !tegra->sys_reboot_mode) { in tegra20_core_limit() 67 if (tegra->core_min_uV > 0) in tegra20_core_limit() [all …]
|
/linux-6.12.1/arch/arm/boot/dts/nvidia/ |
D | tegra20-colibri-iris.dts | 1 // SPDX-License-Identifier: GPL-2.0 2 /dts-v1/; 4 #include <dt-bindings/input/input.h> 5 #include "tegra20-colibri.dtsi" 9 compatible = "toradex,colibri_t20-iris", "toradex,colibri_t20", 10 "nvidia,tegra20"; 13 rtc0 = "/i2c@7000c000/rtc@68"; 15 rtc2 = "/rtc@7000e000"; 22 stdout-path = "serial0:115200n8"; 35 hdmi-supply = <®_5v0>; [all …]
|
D | tegra20-colibri-eval-v3.dts | 1 // SPDX-License-Identifier: GPL-2.0 OR MIT 2 /dts-v1/; 4 #include <dt-bindings/input/input.h> 5 #include "tegra20-colibri.dtsi" 9 compatible = "toradex,colibri_t20-eval-v3", "toradex,colibri_t20", 10 "nvidia,tegra20"; 13 rtc0 = "/i2c@7000c000/rtc@68"; 15 rtc2 = "/rtc@7000e000"; 22 stdout-path = "serial0:115200n8"; 35 hdmi-supply = <®_5v0>; [all …]
|
D | tegra20.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 2 #include <dt-bindings/clock/tegra20-car.h> 3 #include <dt-bindings/gpio/tegra-gpio.h> 4 #include <dt-bindings/memory/tegra20-mc.h> 5 #include <dt-bindings/pinctrl/pinctrl-tegra.h> 6 #include <dt-bindings/interrupt-controller/arm-gic.h> 7 #include <dt-bindings/soc/tegra-pmc.h> 9 #include "tegra20-peripherals-opp.dtsi" 12 compatible = "nvidia,tegra20"; 13 interrupt-parent = <&lic>; [all …]
|
D | tegra20-trimslice.dts | 1 // SPDX-License-Identifier: GPL-2.0 2 /dts-v1/; 4 #include <dt-bindings/input/input.h> 5 #include <dt-bindings/leds/common.h> 6 #include "tegra20.dtsi" 7 #include "tegra20-cpu-opp.dtsi" 11 compatible = "compulab,trimslice", "nvidia,tegra20"; 14 rtc0 = "/i2c@7000c500/rtc@56"; 15 rtc1 = "/rtc@7000e000"; 20 stdout-path = "serial0:115200n8"; [all …]
|
D | tegra20-paz00.dts | 1 // SPDX-License-Identifier: GPL-2.0 2 /dts-v1/; 4 #include <dt-bindings/input/input.h> 5 #include <dt-bindings/thermal/thermal.h> 7 #include "tegra20.dtsi" 8 #include "tegra20-cpu-opp.dtsi" 9 #include "tegra20-cpu-opp-microvolt.dtsi" 13 compatible = "compal,paz00", "nvidia,tegra20"; 19 rtc1 = "/rtc@7000e000"; 25 stdout-path = "serial0:115200n8"; [all …]
|
D | tegra30.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 2 #include <dt-bindings/clock/tegra30-car.h> 3 #include <dt-bindings/gpio/tegra-gpio.h> 4 #include <dt-bindings/memory/tegra30-mc.h> 5 #include <dt-bindings/pinctrl/pinctrl-tegra.h> 6 #include <dt-bindings/interrupt-controller/arm-gic.h> 7 #include <dt-bindings/soc/tegra-pmc.h> 8 #include <dt-bindings/thermal/thermal.h> 10 #include "tegra30-peripherals-opp.dtsi" 14 interrupt-parent = <&lic>; [all …]
|
D | tegra20-acer-a500-picasso.dts | 1 // SPDX-License-Identifier: GPL-2.0 2 /dts-v1/; 4 #include <dt-bindings/input/atmel-maxtouch.h> 5 #include <dt-bindings/input/gpio-keys.h> 6 #include <dt-bindings/input/input.h> 7 #include <dt-bindings/thermal/thermal.h> 9 #include "tegra20.dtsi" 10 #include "tegra20-cpu-opp.dtsi" 11 #include "tegra20-cpu-opp-microvolt.dtsi" 15 compatible = "acer,picasso", "nvidia,tegra20"; [all …]
|
D | tegra114.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 2 #include <dt-bindings/clock/tegra114-car.h> 3 #include <dt-bindings/gpio/tegra-gpio.h> 4 #include <dt-bindings/memory/tegra114-mc.h> 5 #include <dt-bindings/pinctrl/pinctrl-tegra.h> 6 #include <dt-bindings/interrupt-controller/arm-gic.h> 7 #include <dt-bindings/soc/tegra-pmc.h> 11 interrupt-parent = <&lic>; 12 #address-cells = <1>; 13 #size-cells = <1>; [all …]
|
D | tegra20-asus-tf101.dts | 1 // SPDX-License-Identifier: GPL-2.0 2 /dts-v1/; 4 #include <dt-bindings/input/atmel-maxtouch.h> 5 #include <dt-bindings/input/gpio-keys.h> 6 #include <dt-bindings/input/input.h> 7 #include <dt-bindings/thermal/thermal.h> 9 #include "tegra20.dtsi" 10 #include "tegra20-cpu-opp.dtsi" 11 #include "tegra20-cpu-opp-microvolt.dtsi" 15 compatible = "asus,tf101", "nvidia,tegra20"; [all …]
|
D | tegra20-ventana.dts | 1 // SPDX-License-Identifier: GPL-2.0 2 /dts-v1/; 4 #include <dt-bindings/input/input.h> 5 #include <dt-bindings/thermal/thermal.h> 6 #include "tegra20.dtsi" 7 #include "tegra20-cpu-opp.dtsi" 8 #include "tegra20-cpu-opp-microvolt.dtsi" 11 model = "NVIDIA Tegra20 Ventana evaluation board"; 12 compatible = "nvidia,ventana", "nvidia,tegra20"; 16 rtc1 = "/rtc@7000e000"; [all …]
|
D | tegra20-colibri.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 2 #include "tegra20.dtsi" 22 nvidia,ddc-i2c-bus = <&hdmi_ddc>; 23 nvidia,hpd-gpio = 25 pll-supply = <®_1v8_avdd_hdmi_pll>; 26 vdd-supply = <®_3v3_avdd_hdmi>; 31 lan-reset-n-hog { 32 gpio-hog; 34 output-high; 35 line-name = "LAN_RESET#"; [all …]
|
D | tegra124.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 2 #include <dt-bindings/clock/tegra124-car.h> 3 #include <dt-bindings/gpio/tegra-gpio.h> 4 #include <dt-bindings/memory/tegra124-mc.h> 5 #include <dt-bindings/pinctrl/pinctrl-tegra.h> 6 #include <dt-bindings/interrupt-controller/arm-gic.h> 7 #include <dt-bindings/reset/tegra124-car.h> 8 #include <dt-bindings/thermal/tegra124-soctherm.h> 9 #include <dt-bindings/soc/tegra-pmc.h> 11 #include "tegra124-peripherals-opp.dtsi" [all …]
|
D | tegra20-tamonten.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 2 #include "tegra20.dtsi" 6 compatible = "ad,tamonten", "nvidia,tegra20"; 10 rtc1 = "/rtc@7000e000"; 15 stdout-path = "serial0:115200n8"; 24 vdd-supply = <&hdmi_vdd_reg>; 25 pll-supply = <&hdmi_pll_reg>; 27 nvidia,ddc-i2c-bus = <&hdmi_ddc>; 28 nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) 34 pinctrl-names = "default"; [all …]
|
D | tegra20-seaboard.dts | 1 // SPDX-License-Identifier: GPL-2.0 2 /dts-v1/; 4 #include <dt-bindings/input/input.h> 5 #include "tegra20.dtsi" 9 compatible = "nvidia,seaboard", "nvidia,tegra20"; 13 rtc1 = "/rtc@7000e000"; 18 stdout-path = "serial0:115200n8"; 37 vdd-supply = <&hdmi_vdd_reg>; 38 pll-supply = <&hdmi_pll_reg>; 39 hdmi-supply = <&vdd_hdmi>; [all …]
|
/linux-6.12.1/Documentation/devicetree/bindings/power/ |
D | wakeup-source.txt | 5 ---------------- 7 "wakeup-source" boolean property. 9 If the device is marked as a wakeup-source, interrupt wake capability depends 10 on the device specific "interrupt-names" property. If no interrupts are labeled 22 --------------------------------------------------------- 24 1. "gpio-key,wakeup" Documentation/devicetree/bindings/input/gpio-keys{,-polled}.txt 25 2. "has-tpo" Documentation/devicetree/bindings/rtc/rtc-opal.txt 26 3. "linux,wakeup" Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt 29 4. "linux,keypad-wakeup" Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml 30 5. "linux,input-wakeup" Documentation/devicetree/bindings/input/samsung,s3c6410-keypad.yaml [all …]
|
/linux-6.12.1/arch/arm64/boot/dts/nvidia/ |
D | tegra132.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 2 #include <dt-bindings/clock/tegra124-car.h> 3 #include <dt-bindings/gpio/tegra-gpio.h> 4 #include <dt-bindings/memory/tegra124-mc.h> 5 #include <dt-bindings/pinctrl/pinctrl-tegra.h> 6 #include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h> 7 #include <dt-bindings/interrupt-controller/arm-gic.h> 8 #include <dt-bindings/thermal/tegra124-soctherm.h> 9 #include <dt-bindings/soc/tegra-pmc.h> 11 #include "tegra132-peripherals-opp.dtsi" [all …]
|
D | tegra186.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 2 #include <dt-bindings/clock/tegra186-clock.h> 3 #include <dt-bindings/gpio/tegra186-gpio.h> 4 #include <dt-bindings/interrupt-controller/arm-gic.h> 5 #include <dt-bindings/mailbox/tegra186-hsp.h> 6 #include <dt-bindings/memory/tegra186-mc.h> 7 #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h> 8 #include <dt-bindings/power/tegra186-powergate.h> 9 #include <dt-bindings/reset/tegra186-reset.h> 10 #include <dt-bindings/thermal/tegra186-bpmp-thermal.h> [all …]
|
D | tegra210.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 2 #include <dt-bindings/clock/tegra210-car.h> 3 #include <dt-bindings/gpio/tegra-gpio.h> 4 #include <dt-bindings/memory/tegra210-mc.h> 5 #include <dt-bindings/pinctrl/pinctrl-tegra.h> 6 #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h> 7 #include <dt-bindings/reset/tegra210-car.h> 8 #include <dt-bindings/interrupt-controller/arm-gic.h> 9 #include <dt-bindings/thermal/tegra124-soctherm.h> 10 #include <dt-bindings/soc/tegra-pmc.h> [all …]
|
/linux-6.12.1/drivers/rtc/ |
D | rtc-tegra.c | 1 // SPDX-License-Identifier: GPL-2.0+ 3 * An RTC driver for the NVIDIA Tegra 200 series internal RTC. 5 * Copyright (c) 2010-2019, NVIDIA Corporation. 18 #include <linux/rtc.h> 50 struct rtc_device *rtc; member 58 * RTC hardware is busy when it is updating its values over AHB once every 64 return readl(info->base + TEGRA_RTC_REG_BUSY) & 1; in tegra_rtc_check_busy() 70 * RTC to become busy with its periodic update, then returning once the RTC 84 * First wait for the RTC to become busy. This is when it posts its in tegra_rtc_wait_while_busy() 88 if (!retries--) in tegra_rtc_wait_while_busy() [all …]
|
/linux-6.12.1/drivers/spi/ |
D | Makefile | 1 # SPDX-License-Identifier: GPL-2.0 6 ccflags-$(CONFIG_SPI_DEBUG) := -DDEBUG 8 # small core, mostly translating board-specific 10 obj-$(CONFIG_SPI_MASTER) += spi.o 11 obj-$(CONFIG_SPI_MEM) += spi-mem.o 12 obj-$(CONFIG_SPI_MUX) += spi-mux.o 13 obj-$(CONFIG_SPI_SPIDEV) += spidev.o 14 obj-$(CONFIG_SPI_LOOPBACK_TEST) += spi-loopback-test.o 17 obj-$(CONFIG_SPI_AIROHA_SNFI) += spi-airoha-snfi.o 18 obj-$(CONFIG_SPI_ALTERA) += spi-altera-platform.o [all …]
|
/linux-6.12.1/drivers/clk/tegra/ |
D | clk-tegra20.c | 1 // SPDX-License-Identifier: GPL-2.0-only 7 #include <linux/clk-provider.h> 15 #include <dt-bindings/clock/tegra20-car.h> 18 #include "clk-id.h" 444 { .dev_id = "tegra20-ac97", .dt_id = TEGRA20_CLK_AC97 }, 445 { .dev_id = "tegra-apbdma", .dt_id = TEGRA20_CLK_APBDMA }, 446 { .dev_id = "rtc-tegra", .dt_id = TEGRA20_CLK_RTC }, 448 { .dev_id = "tegra-kbc", .dt_id = TEGRA20_CLK_KBC }, 450 { .con_id = "vcp", .dev_id = "tegra-avp", .dt_id = TEGRA20_CLK_VCP }, 451 { .con_id = "bsea", .dev_id = "tegra-avp", .dt_id = TEGRA20_CLK_BSEA }, [all …]
|