/linux-6.12.1/Documentation/devicetree/bindings/media/i2c/ |
D | ti,ds90ub960.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Texas Instruments DS90UB9XX Family FPD-Link Deserializer Hubs 10 - Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> 13 The TI DS90UB9XX devices are FPD-Link video deserializers with I2C and GPIO 17 - $ref: /schemas/i2c/i2c-atr.yaml# 22 - ti,ds90ub960-q1 23 - ti,ds90ub9702-q1 33 clock-names: [all …]
|
/linux-6.12.1/drivers/media/i2c/ |
D | ds90ub960.c | 1 // SPDX-License-Identifier: GPL-2.0 3 * Driver for the Texas Instruments DS90UB960-Q1 video deserializer 12 * - PM for serializer and remote peripherals. We need to manage: 13 * - VPOC 14 * - Power domain? Regulator? Somehow any remote device should be able to 16 * - Link between the deserializer and the serializer 17 * - Related to VPOC management. We probably always want to turn on the VPOC 19 * - Serializer's services: i2c, gpios, power 20 * - The serializer needs to resume before the remote peripherals can 22 * - How to handle gpios? Reserving a gpio essentially keeps the provider [all …]
|
/linux-6.12.1/sound/soc/tegra/ |
D | tegra20_spdif.h | 1 /* SPDX-License-Identifier: GPL-2.0-only */ 3 * tegra20_spdif.h - Definitions for Tegra20 SPDIF driver 6 * Copyright (C) 2011 - NVIDIA, Inc. 9 * Copyright (c) 2008-2009, NVIDIA Corporation 169 /* B-preamble detection status: 0=not detected, 1=B-preamble detected */ 210 * bi-phase period. 215 /* Data strobe mode: 0=Auto-locked 1=Manual locked */ 219 * Manual data strobe time within the bi-phase clock period (in terms of 220 * the number of over-sampling clocks). 226 * Manual SPDIFIN bi-phase clock period (in terms of the number of [all …]
|
/linux-6.12.1/arch/mips/include/asm/sgi/ |
D | ioc.h | 20 * All registers are 8-bit wide aligned on 32-bit boundary. Bad things 91 #define SGINT_TCWORD_MOS 0x02 /* One-shot IRQ mode. */ 94 #define SGINT_TCWORD_MSWST 0x08 /* Software strobe */ 95 #define SGINT_TCWORD_MHWST 0x0a /* Hardware strobe */ 170 #define SGIOC_WRITE_EASEL 0x08 /* 1=autoselect 0=manual cable selection */
|
/linux-6.12.1/drivers/phy/rockchip/ |
D | phy-rockchip-emmc.c | 1 // SPDX-License-Identifier: GPL-2.0-only 5 * Copyright (C) 2016 Shawn Lin <shawn.lin@rock-chips.com> 20 * The higher 16-bit of this register is used for write protection 106 regmap_write(rk_phy->reg_base, in rockchip_emmc_phy_power() 107 rk_phy->reg_offset + GRF_EMMCPHY_CON6, in rockchip_emmc_phy_power() 111 regmap_write(rk_phy->reg_base, in rockchip_emmc_phy_power() 112 rk_phy->reg_offset + GRF_EMMCPHY_CON6, in rockchip_emmc_phy_power() 121 rate = clk_get_rate(rk_phy->emmcclk); in rockchip_emmc_phy_power() 146 rate - ideal_rate : ideal_rate - rate; in rockchip_emmc_phy_power() 155 dev_warn(&phy->dev, "Unsupported rate: %lu\n", rate); in rockchip_emmc_phy_power() [all …]
|
/linux-6.12.1/Documentation/driver-api/media/drivers/ccs/ |
D | ccs-regs.asc | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause 2 # Copyright (C) 2019--2020 Intel Corporation 5 # - f field LSB MSB rflags 6 # - e enum value # after a field 7 # - e enum value [LSB MSB] 8 # - b bool bit 9 # - l arg name min max elsize [discontig...] 23 - e GRBG 0 24 - e RGGB 1 25 - e BGGR 2 [all …]
|
/linux-6.12.1/drivers/media/v4l2-core/ |
D | v4l2-ctrls-defs.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 5 * Copyright (C) 2010-2021 Hans Verkuil <hverkuil-cisco@xs4all.nl> 9 #include <media/v4l2-ctrls.h> 26 "MPEG-1/2 Layer I", in v4l2_ctrl_get_menu() 27 "MPEG-1/2 Layer II", in v4l2_ctrl_get_menu() 28 "MPEG-1/2 Layer III", in v4l2_ctrl_get_menu() 29 "MPEG-2/4 AAC", in v4l2_ctrl_get_menu() 30 "AC-3", in v4l2_ctrl_get_menu() 128 "16-bit CRC", in v4l2_ctrl_get_menu() 141 "MPEG-1", in v4l2_ctrl_get_menu() [all …]
|
/linux-6.12.1/drivers/mmc/host/ |
D | sdhci-esdhc-imx.c | 1 // SPDX-License-Identifier: GPL-2.0 5 * derived from the OF-version. 23 #include <linux/mmc/slot-gpio.h> 28 #include "sdhci-cqhci.h" 29 #include "sdhci-pltfm.h" 30 #include "sdhci-esdhc.h" 82 #define ESDHC_TUNE_CTRL_MAX ((1 << 7) - 1) 84 /* strobe dll register */ 140 * open ended multi-blk IO. Otherwise the TC INT wouldn't 154 /* The IP supports manual tuning process */ [all …]
|
D | sdhci_am654.c | 1 // SPDX-License-Identifier: GPL-2.0 3 * sdhci_am654.c - SDHCI driver for TI's AM654 SOCs 5 * Copyright (C) 2018 Texas Instruments Incorporated - https://www.ti.com 18 #include "sdhci-cqhci.h" 19 #include "sdhci-pltfm.h" 88 #define SDHCI_AM654_AUTOSUSPEND_DELAY -1 108 [MMC_TIMING_LEGACY] = {"ti,otap-del-sel-legacy", 109 "ti,itap-del-sel-legacy", 111 [MMC_TIMING_MMC_HS] = {"ti,otap-del-sel-mmc-hs", 112 "ti,itap-del-sel-mmc-hs", [all …]
|
D | sunxi-mmc.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 4 * (C) Copyright 2007-2011 Reuuimlla Technology Co., Ltd. 5 * (C) Copyright 2007-2011 Aaron Maoye <leafy.myeh@reuuimllatech.com> 6 * (C) Copyright 2013-2014 O2S GmbH <www.o2s.ch> 7 * (C) Copyright 2013-2014 David Lanzendörfer <david.lanzendoerfer@o2s.ch> 8 * (C) Copyright 2013-2014 Hans de Goede <hdegoede@redhat.com> 13 #include <linux/clk/sunxi-ng.h> 16 #include <linux/dma-mapping.h> 27 #include <linux/mmc/slot-gpio.h> 75 #define SDXC_REG_DS_DL_REG 0x148 /* SMC data strobe delay control */ [all …]
|
/linux-6.12.1/drivers/staging/media/imx/ |
D | imx6-mipi-csi2.c | 1 // SPDX-License-Identifier: GPL-2.0+ 3 * MIPI CSI-2 Receiver Subdev for Freescale i.MX6 SOC. 5 * Copyright (c) 2012-2017 Mentor Graphics Inc. 15 #include <media/v4l2-common.h> 16 #include <media/v4l2-device.h> 17 #include <media/v4l2-fwnode.h> 18 #include <media/v4l2-mc.h> 19 #include <media/v4l2-subdev.h> 20 #include "imx-media.h" 32 * The default maximum bit-rate per lane in Mbps, if the [all …]
|
/linux-6.12.1/drivers/comedi/drivers/ |
D | ni_at_ao.c | 1 // SPDX-License-Identifier: GPL-2.0+ 4 * Driver for NI AT-AO-6/10 boards 6 * COMEDI - Linux Control and Measurement Device Interface 12 * Description: National Instruments AT-AO-6/10 13 * Devices: [National Instruments] AT-AO-6 (at-ao-6), AT-AO-10 (at-ao-10) 19 * [0] - I/O port base address 20 * [1] - IRQ (unused) 21 * [2] - DMA (unused) 22 * [3] - analog output range, set by jumpers on hardware 23 * 0 for -10 to 10V bipolar [all …]
|
D | ni_pcimio.c | 1 // SPDX-License-Identifier: GPL-2.0+ 3 * Comedi driver for NI PCI-MIO E series cards 5 * COMEDI - Linux Control and Measurement Device Interface 6 * Copyright (C) 1997-8 David A. Schleef <ds@schleef.org> 11 * Description: National Instruments PCI-MIO-E series and M series (all boards) 15 * Devices: [National Instruments] PCI-MIO-16XE-50 (ni_pcimio), 16 * PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1, PCI-MIO-16E-4, PCI-6014, 17 * PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E, PCI-6032E, PCI-6033E, 18 * PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E, PXI-6025E, PCI-6034E, 19 * PCI-6035E, PCI-6052E, PCI-6110, PCI-6111, PCI-6220, PXI-6220, [all …]
|
D | addi_apci_1500.c | 1 // SPDX-License-Identifier: GPL-2.0+ 4 * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. 6 * ADDI-DATA GmbH 8 * D-77833 Ottersweier 9 * Tel: +19(0)7223/9493-0 10 * Fax: +49(0)7223/9493-92 11 * http://www.addi-data.com 12 * info@addi-data.com 23 * PCI Bar 0 Register map (devpriv->amcc) 28 * PCI Bar 1 Register map (dev->iobase) [all …]
|
D | ni_mio_common.c | 1 // SPDX-License-Identifier: GPL-2.0+ 3 * Hardware driver for DAQ-STC based boards 5 * COMEDI - Linux Control and Measurement Device Interface 6 * Copyright (C) 1997-2001 David A. Schleef <ds@schleef.org> 7 * Copyright (C) 2002-2006 Frank Mori Hess <fmhess@users.sourceforge.net> 17 * 340747b.pdf AT-MIO E series Register Level Programmer Manual 19 * 340934b.pdf DAQ-STC reference manual 26 * 320517c.pdf User manual (obsolete) 27 * 320517f.pdf User manual (new) 31 * 321791a.pdf discontinuation of at-mio-16e-10 rev. c [all …]
|
D | cb_pcidas64.c | 1 // SPDX-License-Identifier: GPL-2.0+ 4 * This is a driver for the ComputerBoards/MeasurementComputing PCI-DAS 13 * his pci-das6402 driver, and source code for working QNX pci-6402 18 * John Sims, for much testing and feedback on pcidas-4020 support. 20 * COMEDI - Linux Control and Measurement Device Interface 21 * Copyright (C) 1997-8 David A. Schleef <ds@schleef.org> 26 * Description: MeasurementComputing PCI-DAS64xx, 60XX, and 4020 series 31 * Devices: [Measurement Computing] PCI-DAS6402/16 (cb_pcidas64), 32 * PCI-DAS6402/12, PCI-DAS64/M1/16, PCI-DAS64/M2/16, 33 * PCI-DAS64/M3/16, PCI-DAS6402/16/JR, PCI-DAS64/M1/16/JR, [all …]
|
/linux-6.12.1/drivers/phy/broadcom/ |
D | phy-brcm-sata.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 55 else if (!strcmp(m, "manual")) in rxaeq_to_val() 196 struct brcm_sata_phy *priv = port->phy_priv; in brcm_sata_ctrl_base() 199 switch (priv->version) { in brcm_sata_ctrl_base() 204 dev_err(priv->dev, "invalid phy version\n"); in brcm_sata_ctrl_base() 208 return priv->ctrl_base + (port->portnum * size); in brcm_sata_ctrl_base() 214 struct brcm_sata_phy *priv = port->phy_priv; in brcm_sata_phy_wr() 215 void __iomem *pcb_base = priv->phy_base; in brcm_sata_phy_wr() 218 if (priv->version == BRCM_SATA_PHY_STB_40NM) in brcm_sata_phy_wr() 219 bank += (port->portnum * SATA_PCB_REG_40NM_SPACE_SIZE); in brcm_sata_phy_wr() [all …]
|
/linux-6.12.1/drivers/media/dvb-frontends/ |
D | cx24110.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 3 cx24110 - Single Chip Satellite Channel Receiver driver module 5 Copyright (C) 2002 Peter Hettkamp <peter.hettkamp@htp-tel.de> based on 74 /* leave front-end AGC parameters at default values */ 82 {0x41,0x00}, /* @ MSB of front-end derotator frequency */ 90 {0x61,0x95}, /* GPIO pins 1-4 have special function */ 106 struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; in cx24110_writereg() 109 if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { in cx24110_writereg() 112 return -EREMOTEIO; in cx24110_writereg() 123 …struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 … in cx24110_readreg() [all …]
|
/linux-6.12.1/drivers/mtd/nand/raw/gpmi-nand/ |
D | gpmi-nand.c | 1 // SPDX-License-Identifier: GPL-2.0+ 5 * Copyright (C) 2010-2015 Freescale Semiconductor, Inc. 18 #include <linux/dma/mxs-dma.h> 19 #include "gpmi-nand.h" 20 #include "gpmi-regs.h" 21 #include "bch-regs.h" 24 #define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME "gpmi-nand" 46 * SFTRST needs 3 GPMI clocks to settle, the reference manual in clear_poll_bit() 52 while ((readl(addr) & mask) && --timeout) in clear_poll_bit() 96 while ((!(readl(reset_addr) & MODULE_CLKGATE)) && --timeout) in gpmi_reset_block() [all …]
|
/linux-6.12.1/drivers/media/pci/tw5864/ |
D | tw5864-reg.h | 1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 3 * TW5864 driver - registers description 8 /* According to TW5864_datasheet_0.6d.pdf, tw5864b1-ds.pdf */ 10 /* Register Description - Direct Map Space */ 11 /* 0x0000 ~ 0x1ffc - H264 Register Map */ 76 * 0->3 4 VLC data buffer in DDR (1M each) 77 * 0->7 8 VLC data buffer in DDR (512k each) 147 /* DDR-DPR Burst Read Enable */ 157 * 0 Single R/W Access (Host <-> DDR) 158 * 1 Burst R/W Access (Host <-> DPR) [all …]
|
/linux-6.12.1/drivers/media/i2c/ccs/ |
D | ccs-core.c | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * drivers/media/i2c/ccs/ccs-core.c 8 * Copyright (C) 2010--2012 Nokia Corporation 13 * Based on smia-sensor.c by Tuukka Toivonen <tuukkat76@gmail.com> 27 #include <linux/v4l2-mediabus.h> 28 #include <media/v4l2-cci.h> 29 #include <media/v4l2-device.h> 30 #include <media/v4l2-fwnode.h> 46 * ccs_module_idents - supported camera modules 49 CCS_IDENT_L(0x01, 0x022b, -1, "vs6555"), [all …]
|