/linux-6.12.1/drivers/staging/olpc_dcon/ |
D | olpc_dcon_xo_1.c | 56 /* Turn off the event enable for GPIO7 just to be safe */ in dcon_init_xo_1() 101 /* Clear INV_EN for GPIO7 (DCONIRQ) */ in dcon_init_xo_1() 107 /* Disable filter for GPIO7 */ in dcon_init_xo_1() 110 /* Disable event counter for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */ in dcon_init_xo_1() 120 /* Enable negative Edge Enable for GPIO7 */ in dcon_init_xo_1() 126 /* Clear the negative edge status for GPIO7 and GPIO12 */ in dcon_init_xo_1() 134 /* Enable events for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */ in dcon_init_xo_1() 190 /* Clear the negative edge status for GPIO7 */ in dcon_read_status_xo_1()
|
/linux-6.12.1/arch/arm/boot/dts/ti/omap/ |
D | am571x-idk.dts | 134 gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>; 140 gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; 146 gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>; 152 gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; 158 gpios = <&gpio7 25 GPIO_ACTIVE_HIGH>; 164 gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>; 172 vbus-gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
|
D | am572x-idk-common.dtsi | 82 gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>; 88 gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>; 135 gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>; 141 gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; 147 gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>; 153 gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
|
D | omap5-igep0050.dts | 105 <&gpio7 1 0>, /* 193, HPD */ 106 <&gpio7 2 0>, /* 194, SCL */ 107 <&gpio7 3 0>; /* 195, SDA */
|
D | am57xx-beagle-x15-revc.dts | 13 gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */ 15 <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
|
D | am57xx-beagle-x15-revb1.dts | 13 gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */ 15 <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
|
D | am57xx-beagle-x15.dts | 14 gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */ 16 <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
|
/linux-6.12.1/arch/arm/boot/dts/renesas/ |
D | r8a7791-koelsch.dts | 111 gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; 118 gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; 125 gpios = <&gpio7 2 GPIO_ACTIVE_LOW>; 132 gpios = <&gpio7 3 GPIO_ACTIVE_LOW>; 139 gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; 146 gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; 153 gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; 202 gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>; 225 gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>; 248 gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>; [all …]
|
D | r8a7793-gose.dts | 102 gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; 109 gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; 116 gpios = <&gpio7 2 GPIO_ACTIVE_LOW>; 123 gpios = <&gpio7 3 GPIO_ACTIVE_LOW>; 130 gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; 137 gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; 144 gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; 193 gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>; 216 gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>; 239 gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>; [all …]
|
/linux-6.12.1/drivers/pinctrl/ |
D | pinctrl-tps6594.c | 78 PINCTRL_PIN(6, "GPIO6"), PINCTRL_PIN(7, "GPIO7"), 85 "GPIO6", "GPIO7", "GPIO8", "GPIO9", "GPIO10", 90 "GPIO6", "GPIO7", "GPIO8", "GPIO9", "GPIO10", 95 "GPIO6", "GPIO7", "GPIO8", "GPIO9", "GPIO10", 100 "GPIO6", "GPIO7", "GPIO8", "GPIO9", "GPIO10", 105 "GPIO6", "GPIO7", "GPIO8", "GPIO9", "GPIO10", 130 "GPIO7", 150 "GPIO7", 155 "GPIO7",
|
/linux-6.12.1/Documentation/devicetree/bindings/pinctrl/ |
D | pinctrl-palmas.txt | 39 GPIO7 is configured in POWERHOLD mode which has higher priority 42 POWERHOLD value to GPIO7 so as to turn off the PMIC in power off 43 scenarios. So for GPIO7 if ti,palmas-override-powerhold is set 60 gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, gpio8, gpio9,
|
D | brcm,bcm6318-pinctrl.yaml | 38 enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, 97 pins = "gpio7"; 108 pins = "gpio7";
|
/linux-6.12.1/arch/arm/boot/dts/nxp/vf/ |
D | vf610-zii-scu4-aib.dts | 346 tx-disable-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; 353 tx-disable-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; 360 tx-disable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; 367 tx-disable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>; 374 tx-disable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>; 381 tx-disable-gpios = <&gpio7 5 GPIO_ACTIVE_HIGH>; 388 tx-disable-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; 395 tx-disable-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>; 402 tx-disable-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; 409 tx-disable-gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>; [all …]
|
/linux-6.12.1/arch/arm/boot/dts/rockchip/ |
D | rk3288-veyron-brain.dts | 78 dvs-gpios = <&gpio7 RK_PB3 GPIO_ACTIVE_HIGH>, 79 <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>; 108 gpio = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
|
D | rk3288-veyron-jaq.dts | 30 dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>, 31 <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>; 71 gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>; 243 &gpio7 {
|
/linux-6.12.1/arch/mips/boot/dts/pic32/ |
D | pic32mzda_sk.dts | 33 gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; 39 gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; 45 gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
|
/linux-6.12.1/arch/arm64/boot/dts/renesas/ |
D | white-hawk-cpu-common.dtsi | 71 gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; 78 gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; 85 gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; 170 interrupt-parent = <&gpio7>; 172 reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
|
D | r8a779h0-gray-hawk-single.dts | 97 gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; 104 gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; 111 gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; 178 interrupt-parent = <&gpio7>; 180 reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
|
D | hihope-rev2.dtsi | 18 gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; 25 gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
|
/linux-6.12.1/arch/mips/alchemy/devboards/ |
D | pm.c | 136 ATTRCMP(gpio6) || ATTRCMP(gpio7)) { in db1x_pmattr_show() 171 ATTRCMP(gpio6) || ATTRCMP(gpio7)) { in db1x_pmattr_store() 204 ATTR(gpio7) 219 ATTR_LIST(gpio7),
|
/linux-6.12.1/drivers/pinctrl/qcom/ |
D | pinctrl-sm8650-lpass-lpi.c | 65 PINCTRL_PIN(7, "gpio7"), 84 "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", 91 static const char * const dmic1_data_groups[] = { "gpio7" }; 102 static const char * const i2s1_ws_groups[] = { "gpio7" };
|
D | pinctrl-sm8550-lpass-lpi.c | 63 PINCTRL_PIN(7, "gpio7"), 82 "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", 89 static const char * const dmic1_data_groups[] = { "gpio7" }; 100 static const char * const i2s1_ws_groups[] = { "gpio7" };
|
D | pinctrl-sm8250-lpass-lpi.c | 47 PINCTRL_PIN(7, "gpio7"), 61 static const char * const dmic1_data_groups[] = { "gpio7" }; 72 static const char * const i2s1_ws_groups[] = { "gpio7" };
|
D | pinctrl-sc7280-lpass-lpi.c | 47 PINCTRL_PIN(7, "gpio7"), 62 static const char * const dmic1_data_groups[] = { "gpio7" }; 73 static const char * const i2s1_ws_groups[] = { "gpio7" };
|
/linux-6.12.1/arch/arm/boot/dts/nxp/imx/ |
D | imx6qdl-phytec-mira-peb-eval-01.dtsi | 37 gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; 43 gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
|