/linux-6.12.1/Documentation/devicetree/bindings/media/i2c/ |
D | adv7180.yaml | 4 $id: http://devicetree.org/schemas/media/i2c/adv7180.yaml# 7 title: Analog Devices ADV7180 analog video decoder family 13 The adv7180 family devices are used to capture analog video to different 20 - adi,adv7180 68 - adi,adv7180 138 compatible = "adi,adv7180"; 142 adv7180: endpoint {
|
/linux-6.12.1/Documentation/admin-guide/media/ |
D | imx.rst | 116 the SabreAuto has only the ADV7180 decoder on a parallel bt.656 bus, and 463 i.MX6Q SabreAuto with ADV7180 decoder 466 On the i.MX6Q SabreAuto, an on-board ADV7180 SD decoder is connected to the 469 The following example configures a pipeline to capture from the ADV7180 471 interweave (unconverted and without motion compensation). The adv7180 478 media-ctl -l "'adv7180 3-0021':0 -> 'ipu1_csi0_mux':1[1]" 482 media-ctl -V "'adv7180 3-0021':0 [fmt:UYVY2X8/720x480 field:seq-bt]" 491 This example configures a pipeline to capture from the ADV7180 493 Compensated de-interlacing. The adv7180 must output sequential or 499 media-ctl -l "'adv7180 3-0021':0 -> 'ipu1_csi0_mux':1[1]" [all …]
|
D | imx6q-sabreauto.dot | 49 …n00000081 [label="{{} | adv7180 3-0021\n/dev/v4l-subdev14 | {<port0> 0}}", shape=Mrecord, style=fi…
|
D | i2c-cardlist.rst | 189 adv7180 Analog Devices ADV7180 decoder
|
/linux-6.12.1/arch/arm/boot/dts/nxp/imx/ |
D | imx6dl-gw54xx.dts | 16 adv7180: camera@20 { label 17 compatible = "adi,adv7180";
|
D | imx6q-gw53xx.dts | 16 adv7180: camera@20 { label 17 compatible = "adi,adv7180";
|
D | imx6dl-gw53xx.dts | 16 adv7180: camera@20 { label 17 compatible = "adi,adv7180";
|
D | imx6dl-gw52xx.dts | 16 adv7180: camera@20 { label 17 compatible = "adi,adv7180";
|
D | imx6q-gw52xx.dts | 16 adv7180: camera@20 { label 17 compatible = "adi,adv7180";
|
D | imx6q-gw54xx.dts | 33 adv7180: camera@20 { label 34 compatible = "adi,adv7180";
|
D | imx6qdl-gw51xx.dtsi | 367 adv7180: camera@20 { label 368 compatible = "adi,adv7180";
|
D | imx6qdl-gw553x.dtsi | 422 adv7180: camera@20 { label 423 compatible = "adi,adv7180";
|
D | imx6qdl-sabreauto.dtsi | 182 adv7180: camera@21 { label 183 compatible = "adi,adv7180";
|
/linux-6.12.1/Documentation/devicetree/bindings/i2c/ |
D | i2c-demux-pinctrl.yaml | 125 compatible = "adi,adv7180"; 129 adv7180: endpoint {
|
/linux-6.12.1/arch/arm/boot/dts/renesas/ |
D | r8a7791-porter.dts | 183 compatible = "adi,adv7180"; 187 adv7180: endpoint { label 452 remote-endpoint = <&adv7180>;
|
D | r8a7794-alt.dts | 203 compatible = "adi,adv7180"; 207 adv7180: endpoint { label 475 remote-endpoint = <&adv7180>;
|
D | r8a7794-silk.dts | 251 compatible = "adi,adv7180"; 255 adv7180: endpoint { label 526 remote-endpoint = <&adv7180>;
|
D | r8a7791-koelsch.dts | 386 compatible = "adi,adv7180"; 390 adv7180: endpoint { label 907 remote-endpoint = <&adv7180>;
|
D | r8a7790-lager.dts | 354 compatible = "adi,adv7180"; 358 adv7180: endpoint { label 928 remote-endpoint = <&adv7180>;
|
/linux-6.12.1/Documentation/i2c/busses/ |
D | i2c-ocores.rst | 51 I2C_BOARD_INFO("adv7180", 0x42 >> 1),
|
/linux-6.12.1/drivers/media/i2c/ |
D | adv7180.c | 3 * adv7180.c Analog Devices ADV7180 video decoder driver 847 * The ADV7180 sensor supports BT.601/656 output modes. in adv7180_get_mbus_config() 1585 { "adv7180", (kernel_ulong_t)&adv7180_info }, 1601 { .compatible = "adi,adv7180", &adv7180_info }, 1629 MODULE_DESCRIPTION("Analog Devices ADV7180 video decoder driver");
|
D | Kconfig | 1026 tristate "Analog Devices ADV7180 decoder" 1032 Support for the Analog Devices ADV7180 video decoder. 1035 module will be called adv7180.
|
D | Makefile | 10 obj-$(CONFIG_VIDEO_ADV7180) += adv7180.o
|
/linux-6.12.1/drivers/media/pci/sta2x11/ |
D | sta2x11_vip.c | 868 * from ADV7180 in sta2x11_vip_init_controls() 1075 /* Get ADV7180 subdevice */ in sta2x11_vip_init_one() 1084 "adv7180", vip->config->i2c_addr, in sta2x11_vip_init_one()
|
/linux-6.12.1/Documentation/devicetree/bindings/media/ |
D | renesas,vin.yaml | 277 remote-endpoint = <&adv7180>;
|