| /linux-6.12.1/arch/arm64/boot/dts/renesas/ |
| D | hihope-rzg2-ex-lvds.dtsi | 11 pwms = <&pwm0 0 50000>;
41 pwm0_pins: pwm0 {
42 groups = "pwm0";
43 function = "pwm0";
47 &pwm0 {
|
| D | hihope-rzg2-ex.dtsi | 84 pwm0_pins: pwm0 {
85 groups = "pwm0";
86 function = "pwm0";
90 &pwm0 {
|
| /linux-6.12.1/Documentation/devicetree/bindings/pinctrl/ |
| D | loongson,ls2k-pinctrl.yaml | 42 enum: [gpio, sdio, can1, can0, pwm3, pwm2, pwm1, pwm0, i2c1, i2c0,
47 enum: [gpio, sdio, can1, can0, pwm3, pwm2, pwm1, pwm0, i2c1, i2c0,
84 pwm0_pins_default: pwm0-pins {
86 groups = "pwm0";
87 function = "pwm0";
|
| D | mediatek,mt76x8-pinctrl.yaml | 40 p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1,
82 p4led_kn, perst, pwm0, pwm1, refclk, sdmode, spi,
244 const: pwm0
248 enum: [pwm0]
320 enum: [pwm0]
393 p3led_kn, p4led_an, p4led_kn, pwm0, pwm1, sdmode, spis]
|
| D | mediatek,mt7986-pinctrl.yaml | 96 "pwm0" "pwm" 21,
216 enum: [pwm0, pwm1_0, pwm1_1]
276 GPIO_14, GPIO_15, PWM0, PWM1, SPI0_CLK, SPI0_MOSI,
400 groups = "pwm0", "pwm1_0";
|
| /linux-6.12.1/arch/riscv/boot/dts/sifive/ |
| D | hifive-unleashed-a00.dts | 52 pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>;
60 pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>;
68 pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>;
76 pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>;
131 &pwm0 {
|
| D | hifive-unmatched-a00.dts | 54 pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>;
71 pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>;
77 pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>;
83 pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>;
275 &pwm0 {
|
| /linux-6.12.1/arch/arm/boot/dts/microchip/ |
| D | at91-kizboxmini-common.dtsi | 60 pwms = <&pwm0 2 10000000 0>;
68 pwms = <&pwm0 0 10000000 0>;
75 pwms = <&pwm0 1 10000000 0>;
93 &pwm0 {
|
| D | at91-kizbox2-common.dtsi | 64 pwms = <&pwm0 2 10000000 0>;
71 pwms = <&pwm0 1 10000000 0>;
78 pwms = <&pwm0 0 10000000 0>;
163 &pwm0 {
|
| D | at91-kizbox3_common.dtsi | 76 pwms = <&pwm0 0 10000000 0>;
84 pwms = <&pwm0 1 10000000 0>;
92 pwms = <&pwm0 2 10000000 0>;
99 pwms = <&pwm0 3 10000000 0>;
334 &pwm0 {
|
| D | at91sam9m10g45ek.dts | 158 pwm0 {
215 pwm0: pwm@fffb8000 { label
333 pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>;
340 pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
|
| D | at91-sam9x60_curiosity.dts | 380 pwm0 {
381 pinctrl_pwm0_0: pwm0-0 {
385 pinctrl_pwm0_1: pwm0-1 {
389 pinctrl_pwm0_2: pwm0-2 {
437 &pwm0 {
|
| D | at91sam9rlek.dts | 190 pwm0: pwm@fffc8000 { label
230 pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
236 pwms = <&pwm0 2 5000 PWM_POLARITY_INVERTED>;
|
| /linux-6.12.1/Documentation/devicetree/bindings/pwm/ |
| D | pwm-sifive.yaml | 32 - const: sifive,pwm0
37 SiFive FU540 and FU740 chip respectively, and "sifive,pwm0" for the
66 compatible = "sifive,fu540-c000-pwm", "sifive,pwm0";
|
| D | pwm-lp3943.txt | 9 - ti,pwm0 or ti,pwm1: Output pin number(s) for PWM channel 0 or 1.
32 ti,pwm0 = <8 9 10>;
|
| /linux-6.12.1/arch/loongarch/boot/dts/ |
| D | loongson-2k1000-ref.dts | 141 pwm0_pins_default: pwm0-pins {
143 groups = "pwm0";
144 function = "pwm0";
|
| /linux-6.12.1/drivers/video/backlight/ |
| D | pandora_bl.c | 4 * Pandora uses TWL4030 PWM0 -> TPS61161 combo for control backlight.
59 /* first disable PWM0 output, then clock */ in pandora_backlight_update_status()
76 /* first enable clock, then PWM0 out */ in pandora_backlight_update_status()
|
| /linux-6.12.1/arch/arm64/boot/dts/rockchip/ |
| D | rk3318-a95x-z2.dts | 121 pwms = <&pwm0 0 5000 1>;
240 pwm0 {
241 pwm0_pin_pull_up: pwm0-pin-pull-up {
275 &pwm0 {
|
| D | rk3566-powkiddy-rgb10max3.dts | 74 pwms = <&pwm0 0 25000 0>;
78 &pwm0 {
|
| /linux-6.12.1/arch/arm/boot/dts/broadcom/ |
| D | bcm2835-common.dtsi | 165 pwm0_gpio12: pwm0-gpio12 {
169 pwm0_gpio18: pwm0-gpio18 {
173 pwm0_gpio40: pwm0-gpio40 {
|
| /linux-6.12.1/drivers/pinctrl/ |
| D | pinctrl-loongson2.c | 115 PMX_GROUP(pwm0, 0x0, 12),
130 SPECIFIC_GROUP(pwm0);
141 "pwm3", "pwm2", "pwm1", "pwm0",
157 FUNCTION(pwm0),
|
| /linux-6.12.1/drivers/pinctrl/sunxi/ |
| D | pinctrl-suniv-f1c100s.c | 50 SUNXI_FUNCTION(0x3, "pwm0"), /* PWM0 */
83 SUNXI_FUNCTION(0x3, "pwm0"), /* PWM0 */
347 SUNXI_FUNCTION(0x4, "pwm0"), /* PWM0 */
|
| /linux-6.12.1/arch/arm/boot/dts/rockchip/ |
| D | rk3288-veyron-edp.dtsi | 50 pwms = <&pwm0 0 1000000 0>;
109 &pwm0 {
|
| /linux-6.12.1/drivers/pinctrl/mediatek/ |
| D | pinctrl-mt76x8.c | 46 FUNC("pwm0 utif", 2, 18, 1),
47 FUNC("pwm0", 0, 18, 1),
173 GRP_G("pwm0", pwm0_grp, MT76X8_GPIO_MODE_MASK,
|
| /linux-6.12.1/arch/arm/boot/dts/intel/pxa/ |
| D | pxa300-raumfeld-controller.dts | 59 pwms = <&pwm0 10000>;
109 &pwm0 {
227 pwm0_pins: pwm0-pins {
|