| /linux-6.12.1/Documentation/devicetree/bindings/regulator/ |
| D | ltc3676.txt | 9 ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as
13 nodes for sw1, sw2, sw3, sw4, ldo1, ldo2 and ldo4 additionally need to specify
24 Regulators ldo1, ldo2, and ldo4 have a fixed 0.725 V reference and thus output
86 ldo4_reg: ldo4 {
|
| D | ltc3589.txt | 9 ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as
16 Required properties (not on ldo3, ldo4):
24 regulator is fixed to 1.8 V on LTC3589 and to 2.8 V on LTC3589-1,2. The ldo4
94 ldo4_reg: ldo4 {
|
| D | nxp,pca9450-regulator.yaml | 22 # LDO1, LDO2, LDO3, LDO4, LDO5
179 ldo4: LDO4 {
180 regulator-name = "LDO4";
|
| D | pv88060.txt | 11 BUCK1, LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, SW1, SW2, SW3, SW4,
56 LDO4 {
57 regulator-name = "ldo4";
|
| D | max8925-regulator.txt | 11 - LDO4 for LDO LDO4
|
| D | rohm,bd71815-regulator.yaml | 21 ldo1, ldo2, ldo3, ldo4, ldo5,
52 GPIO used to control ldo4 state (when ldo4 is controlled by GPIO).
|
| D | tps65217.txt | 18 tps65217: dcdc1, dcdc2, dcdc3, ldo1, ldo2, ldo3 and ldo4
71 ldo4_reg: ldo4 {
|
| D | dlg,slg51000.yaml | 34 Input supply for ldo4, required if regulator is enabled
107 ldo4 {
|
| /linux-6.12.1/drivers/regulator/ |
| D | tps65912-regulator.c | 20 LDO4, LDO5, LDO6, LDO7, LDO8, LDO9, LDO10 }; enumerator
94 TPS65912_REGULATOR("LDO4", LDO4, "ldo4", tps65912_ops_ldo,
|
| D | tps65219-regulator.c | 37 { "LDO4_SCG", "LDO4", "short circuit to ground", REGULATOR_EVENT_REGULATION_OUT },
38 { "LDO4_OC", "LDO4", "overcurrent", REGULATOR_EVENT_OVER_CURRENT },
39 { "LDO4_UV", "LDO4", "undervoltage", REGULATOR_EVENT_UNDER_VOLTAGE },
64 { "LDO4_RV", "LDO4", "residual voltage", REGULATOR_EVENT_OVER_VOLTAGE_WARN },
74 { "LDO4_RV_SD", "LDO4", "residual voltage on shutdown", REGULATOR_EVENT_OVER_VOLTAGE_WARN },
262 TPS65219_REGULATOR("LDO4", "ldo4", TPS65219_LDO_4,
|
| D | max77620-regulator.c | 736 RAIL_LDO(LDO4, ldo4, "in-ldo4-6", P, 800000, 1587500, 12500),
738 RAIL_LDO(LDO6, ldo6, "in-ldo4-6", P, 800000, 3950000, 50000),
754 RAIL_LDO(LDO4, ldo4, "in-ldo4-6", P, 800000, 1587500, 12500),
756 RAIL_LDO(LDO6, ldo6, "in-ldo4-6", P, 800000, 3950000, 50000),
772 RAIL_LDO(LDO4, ldo4, "in-ldo4-6", P, 800000, 1587500, 12500),
774 RAIL_LDO(LDO6, ldo6, "in-ldo4-6", P, 800000, 3950000, 50000),
|
| D | max8893.c | 88 .name = "LDO4",
89 .supply_name = "in-ldo4",
90 .of_match = of_match_ptr("ldo4"),
|
| D | qcom-rpmh-regulator.c | 943 RPMH_VREG("ldo4", "ldo%s4", &pmic4_nldo, "vdd-l4-l5"),
1005 RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l3-l4-l5-l18"),
1035 RPMH_VREG("ldo4", "ldo%s4", &pmic5_pldo, "vdd-l4-l5-l6"),
1061 RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l3-l4-l5-l18"),
1092 RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo515, "vdd-s9"),
1117 RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l1-l4"),
1141 RPMH_VREG("ldo4", "ldo%s4", &pmic5_pldo, "vdd-l3-l4-l5-l7-l13"),
1165 RPMH_VREG("ldo4", "ldo%s4", &pmic5_pldo_lv, "vdd-l4"),
1173 RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo515, "vdd-l1-l4-l10"),
1241 RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l4"),
[all …]
|
| /linux-6.12.1/arch/arm64/boot/dts/hisilicon/ |
| D | hikey970-pmic.dtsi | 34 ldo4: ldo4 { /* 40 PIN */ label
35 regulator-name = "ldo4";
|
| /linux-6.12.1/arch/arm/boot/dts/ti/omap/ |
| D | dra72-evm-tps65917.dtsi | 30 ldo4-in-supply = <&evm_5v0>;
114 ldo4_reg: ldo4 {
116 regulator-name = "ldo4";
|
| /linux-6.12.1/Documentation/devicetree/bindings/mfd/ |
| D | ti,tps6594.yaml | 134 ldo4-supply = <&vcc_3v3_sys>;
185 ldo4: ldo4 {
|
| D | da9052-i2c.txt | 26 ldo4 : regulator LDO4
|
| D | wm831x.txt | 46 ldo4 : LDO4
|
| D | da9055.txt | 38 ldo4 : regulator LDO4
|
| D | rohm,bd71828-pmic.yaml | 174 ldo4: LDO4 {
175 regulator-name = "ldo4";
|
| D | rohm,bd71815-pmic.yaml | 173 ldo4: ldo4 {
174 regulator-name = "ldo4";
|
| D | rohm,bd71847-pmic.yaml | 211 ldo4: LDO4 {
212 regulator-name = "ldo4";
|
| D | hisilicon,hi6421-spmi-pmic.yaml | 85 ldo4 {
86 regulator-name = "ldo4";
|
| /linux-6.12.1/arch/arm64/boot/dts/freescale/ |
| D | imx8mm-emtop-som.dtsi | 140 ldo4: LDO4 { label
141 regulator-name = "LDO4";
|
| D | imx8mp-debix-som-a.dtsi | 140 ldo4: LDO4 { label
141 regulator-name = "LDO4";
|