| /linux-6.12.1/Documentation/devicetree/bindings/regulator/ |
| D | ltc3676.txt | 9 ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as
16 Required properties (not on ldo3):
25 0.725 * (1 + R1/R2) V. The ldo3 regulator is fixed to 1.8 V. The ldo1 standby
80 ldo3_reg: ldo3 {
|
| D | ltc3589.txt | 9 ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as
16 Required properties (not on ldo3, ldo4):
23 have a fixed 0.8 V reference and thus output 0.8 * (1 + R1/R2) V. The ldo3
88 ldo3_reg: ldo3 {
|
| D | nxp,pca9450-regulator.yaml | 22 # LDO1, LDO2, LDO3, LDO4, LDO5
172 ldo3: LDO3 {
173 regulator-name = "LDO3";
|
| D | pv88060.txt | 11 BUCK1, LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, SW1, SW2, SW3, SW4,
49 LDO3 {
50 regulator-name = "ldo3";
|
| D | as3722-regulator.txt | 17 vin-ldo3-4-supply: Input supply for LDO3 and LDO4.
40 by LDO3.
|
| D | max8925-regulator.txt | 10 - LDO3 for LDO LDO3
|
| D | tps65217.txt | 18 tps65217: dcdc1, dcdc2, dcdc3, ldo1, ldo2, ldo3 and ldo4
64 ldo3_reg: ldo3 {
|
| /linux-6.12.1/drivers/regulator/ |
| D | tps65219-regulator.c | 34 { "LDO3_SCG", "LDO3", "short circuit to ground", REGULATOR_EVENT_REGULATION_OUT },
35 { "LDO3_OC", "LDO3", "overcurrent", REGULATOR_EVENT_OVER_CURRENT },
36 { "LDO3_UV", "LDO3", "undervoltage", REGULATOR_EVENT_UNDER_VOLTAGE },
63 { "LDO3_RV", "LDO3", "residual voltage", REGULATOR_EVENT_OVER_VOLTAGE_WARN },
73 { "LDO3_RV_SD", "LDO3", "residual voltage on shutdown", REGULATOR_EVENT_OVER_VOLTAGE_WARN },
206 /* Operations permitted on LDO3/4 */
255 TPS65219_REGULATOR("LDO3", "ldo3", TPS65219_LDO_3,
|
| D | mt6358-regulator.c | 540 MT6358_LDO("ldo_vibr", VIBR, "vsys-ldo3", vibr,
550 MT6358_LDO("ldo_vcama1", VCAMA1, "vsys-ldo3", vcama,
554 MT6358_LDO("ldo_vcn33", VCN33, "vsys-ldo3", vcn33,
556 MT6358_LDO("ldo_vcama2", VCAMA2, "vsys-ldo3", vcama,
565 MT6358_LDO1("ldo_vsram_proc11", VSRAM_PROC11, "vs2-ldo3", 500000, 1293750, 6250,
567 MT6358_LDO1("ldo_vsram_others", VSRAM_OTHERS, "vs2-ldo3", 500000, 1293750, 6250,
569 MT6358_LDO1("ldo_vsram_gpu", VSRAM_GPU, "vs2-ldo3", 500000, 1293750, 6250,
571 MT6358_LDO1("ldo_vsram_proc12", VSRAM_PROC12, "vs2-ldo3", 500000, 1293750, 6250,
610 MT6366_LDO("vibr", VIBR, vibr, "vsys-ldo3",
618 MT6366_LDO("vemc", VEMC, vmch_vemc, "vsys-ldo3",
[all …]
|
| D | tps65912-regulator.c | 19 enum tps65912_regulators { DCDC1, DCDC2, DCDC3, DCDC4, LDO1, LDO2, LDO3, enumerator
91 TPS65912_REGULATOR("LDO3", LDO3, "ldo3", tps65912_ops_ldo,
|
| D | max77620-regulator.c | 735 RAIL_LDO(LDO3, ldo3, "in-ldo3-5", P, 800000, 3950000, 50000),
737 RAIL_LDO(LDO5, ldo5, "in-ldo3-5", P, 800000, 3950000, 50000),
753 RAIL_LDO(LDO3, ldo3, "in-ldo3-5", P, 800000, 3950000, 50000),
755 RAIL_LDO(LDO5, ldo5, "in-ldo3-5", P, 800000, 3950000, 50000),
771 RAIL_LDO(LDO3, ldo3, "in-ldo3-5", P, 800000, 3950000, 50000),
773 RAIL_LDO(LDO5, ldo5, "in-ldo3-5", P, 800000, 3950000, 50000),
|
| D | qcom-rpmh-regulator.c | 942 RPMH_VREG("ldo3", "ldo%s3", &pmic4_nldo, "vdd-l3-l11"),
1004 RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3-l4-l5-l18"),
1034 RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l2-l3"),
1060 RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3-l4-l5-l18"),
1091 RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo515, "vdd-l2-l3"),
1116 RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3-l5"),
1140 RPMH_VREG("ldo3", "ldo%s3", &pmic5_pldo, "vdd-l3-l4-l5-l7-l13"),
1164 RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"),
1172 RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo515, "vdd-l3"),
1201 RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo515, "vdd-l3"),
[all …]
|
| D | tps6594-regulator.c | 322 { TPS6594_IRQ_NAME_LDO3_OV, "LDO3", "overvoltage", REGULATOR_EVENT_OVER_VOLTAGE_WARN },
323 { TPS6594_IRQ_NAME_LDO3_UV, "LDO3", "undervoltage", REGULATOR_EVENT_UNDER_VOLTAGE },
324 { TPS6594_IRQ_NAME_LDO3_SC, "LDO3", "short circuit", REGULATOR_EVENT_REGULATION_OUT },
325 { TPS6594_IRQ_NAME_LDO3_ILIM, "LDO3", "reach ilim, overcurrent",
368 { TPS65224_IRQ_NAME_LDO3_UVOV, "LDO3", "voltage out of range",
456 TPS6594_REGULATOR("LDO3", "ldo3", TPS6594_LDO_3,
487 TPS6594_REGULATOR("LDO3", "ldo3", TPS6594_LDO_3,
|
| D | max8893.c | 71 .name = "LDO3",
72 .supply_name = "in-ldo3",
73 .of_match = of_match_ptr("ldo3"),
|
| D | ltc3676.c | 154 /* LDO3 has a fixed output */ in ltc3676_of_parse_cb()
188 /* LDO2, LDO3 fixed (LDO2 has external scalar via R1/R2 feedback res) */
231 LTC3676_FIXED_REG(LDO3, ldo3, LDOA, 5),
315 descs[LTC3676_LDO3].fixed_uV = 1800000; /* LDO3 is fixed 1.8V */ in ltc3676_regulator_probe()
|
| /linux-6.12.1/arch/arm64/boot/dts/hisilicon/ |
| D | hikey970-pmic.dtsi | 27 ldo3: ldo3 { /* HDMI */ label
28 regulator-name = "ldo3";
|
| /linux-6.12.1/Documentation/devicetree/bindings/mfd/ |
| D | x-powers,axp152.yaml | 210 LDO3 power supply node, if present.
285 Only 800 and 1600 are valid for the DCDC2 and LDO3 regulators on
290 Only valid for the LDO3 regulator.
401 reg_ldo3: ldo3 {
402 regulator-name = "ldo3";
|
| D | ti,tps6594.yaml | 133 ldo3-supply = <&buck5>;
177 ldo3: ldo3 {
|
| D | da9052-i2c.txt | 25 ldo3 : regulator LDO3
|
| D | wm831x.txt | 45 ldo3 : LDO3
|
| D | da9055.txt | 37 ldo3 : regulator LDO3
|
| D | rohm,bd71828-pmic.yaml | 169 ldo3: LDO3 {
170 regulator-name = "ldo3";
|
| /linux-6.12.1/arch/arm/boot/dts/ti/omap/ |
| D | dra72-evm-tps65917.dtsi | 29 ldo3-in-supply = <&vsys_3v3>;
96 ldo3_reg: ldo3 {
98 regulator-name = "ldo3";
|
| /linux-6.12.1/arch/arm64/boot/dts/freescale/ |
| D | imx8mp-icore-mx8mp.dtsi | 95 ldo3: LDO3 { label
100 regulator-name = "LDO3";
|
| /linux-6.12.1/arch/arm64/boot/dts/qcom/ |
| D | sm8550-samsung-q5q.dts | 234 vreg_l3c_0p91: ldo3 {
286 vreg_l3e_1p2: ldo3 {
319 vreg_l3f_0p91: ldo3 {
387 vreg_l3g_1p2: ldo3 {
413 vreg_l3m_2p8: ldo3 {
467 vreg_l3n_2p8: ldo3 {
|