/linux-6.12.1/drivers/thermal/samsung/ |
D | exynos_tmu.c | 139 * struct exynos_tmu_data : A structure to hold the private data of the TMU 151 * @min_efuse_value: minimum valid trimming data 152 * @max_efuse_value: maximum valid trimming data 190 void (*tmu_set_low_temp)(struct exynos_tmu_data *data, u8 temp); 191 void (*tmu_set_high_temp)(struct exynos_tmu_data *data, u8 temp); 192 void (*tmu_set_crit_temp)(struct exynos_tmu_data *data, u8 temp); 193 void (*tmu_disable_low)(struct exynos_tmu_data *data); 194 void (*tmu_disable_high)(struct exynos_tmu_data *data); 197 int (*tmu_read)(struct exynos_tmu_data *data); 198 void (*tmu_set_emulation)(struct exynos_tmu_data *data, int temp); [all …]
|
/linux-6.12.1/drivers/iio/common/ssp_sensors/ |
D | ssp_dev.c | 62 static void ssp_toggle_mcu_reset_gpio(struct ssp_data *data) in ssp_toggle_mcu_reset_gpio() argument 64 gpiod_set_value(data->mcu_reset_gpiod, 0); in ssp_toggle_mcu_reset_gpio() 66 gpiod_set_value(data->mcu_reset_gpiod, 1); in ssp_toggle_mcu_reset_gpio() 70 static void ssp_sync_available_sensors(struct ssp_data *data) in ssp_sync_available_sensors() argument 75 if (data->available_sensors & BIT(i)) { in ssp_sync_available_sensors() 76 ret = ssp_enable_sensor(data, i, data->delay_buf[i]); in ssp_sync_available_sensors() 78 dev_err(&data->spi->dev, in ssp_sync_available_sensors() 85 ret = ssp_command(data, SSP_MSG2SSP_AP_MCU_SET_DUMPMODE, in ssp_sync_available_sensors() 86 data->mcu_dump_mode); in ssp_sync_available_sensors() 88 dev_err(&data->spi->dev, in ssp_sync_available_sensors() [all …]
|
/linux-6.12.1/drivers/gpu/drm/amd/display/dc/basics/ |
D | dce_calcs.c | 78 struct bw_calcs_data *data) in calculate_bandwidth() argument 170 if (data->d0_underlay_mode == bw_def_none) in calculate_bandwidth() 174 if (data->d1_underlay_mode == bw_def_none) in calculate_bandwidth() 178 data->number_of_underlay_surfaces = d0_underlay_enable + d1_underlay_enable; in calculate_bandwidth() 179 switch (data->underlay_surface_type) { in calculate_bandwidth() 183 data->bytes_per_pixel[0] = 1; in calculate_bandwidth() 184 data->bytes_per_pixel[2] = 1; in calculate_bandwidth() 187 data->bytes_per_pixel[1] = 2; in calculate_bandwidth() 188 data->bytes_per_pixel[3] = 2; in calculate_bandwidth() 189 data->lb_size_per_component[0] = dceip->underlay420_luma_lb_size_per_component; in calculate_bandwidth() [all …]
|
/linux-6.12.1/drivers/hwmon/ |
D | ibmpex.c | 30 static inline u16 extract_value(const char *data, int offset) in extract_value() argument 32 return be16_to_cpup((__be16 *)&data[offset]); in extract_value() 111 static int ibmpex_send_message(struct ibmpex_bmc_data *data) in ibmpex_send_message() argument 115 err = ipmi_validate_addr(&data->address, sizeof(data->address)); in ibmpex_send_message() 119 data->tx_msgid++; in ibmpex_send_message() 120 err = ipmi_request_settime(data->user, &data->address, data->tx_msgid, in ibmpex_send_message() 121 &data->tx_message, data, 0, 0, 0); in ibmpex_send_message() 127 dev_err(data->bmc_device, "request_settime=%x\n", err); in ibmpex_send_message() 130 dev_err(data->bmc_device, "validate_addr=%x\n", err); in ibmpex_send_message() 134 static int ibmpex_ver_check(struct ibmpex_bmc_data *data) in ibmpex_ver_check() argument [all …]
|
D | sht15.c | 45 #define SHT15_TSU 150 /* (nsecs) data setup time */ 67 * @d1: see data sheet 120 * struct sht15_data - device instance specific data 122 * @data: data GPIO line 129 * @checksumming: flag used to enable the data validation with CRC. 151 struct gpio_desc *data; member 177 * @data: sht15 specific data. 178 * @value: sht15 retrieved data. 179 * @len: Length of retrieved data 183 static u8 sht15_crc8(struct sht15_data *data, in sht15_crc8() argument [all …]
|
D | nct6775-core.c | 64 /* used to set data->name = nct6775_device_names[data->sio_kind] */ 81 /* Common and NCT6775 specific data */ 192 #define NCT6775_AUTO_TEMP(data, nr, p) ((data)->REG_AUTO_TEMP[nr] + (p)) argument 193 #define NCT6775_AUTO_PWM(data, nr, p) ((data)->REG_AUTO_PWM[nr] + (p)) argument 248 /* NCT6776 specific data */ 333 /* NCT6779 specific data */ 439 /* NCT6791 specific data */ 459 /* NCT6792/NCT6793 specific data */ 738 /* NCT6102D/NCT6106D specific data */ 839 /* NCT6112D/NCT6114D/NCT6116D specific data */ [all …]
|
/linux-6.12.1/drivers/gpu/drm/panel/ |
D | panel-novatek-nt36672a.c | 32 const char data[2]; member 92 err = mipi_dsi_dcs_write(pinfo->link, cmd->data[0], cmd->data + 1, 1); in nt36672a_send_cmds() 252 { .data = {0xFF, 0x22} }, 253 { .data = {0x00, 0x40} }, 254 { .data = {0x01, 0xC0} }, 255 { .data = {0x02, 0x40} }, 256 { .data = {0x03, 0x40} }, 257 { .data = {0x04, 0x40} }, 258 { .data = {0x05, 0x40} }, 259 { .data = {0x06, 0x40} }, [all …]
|
D | panel-feixin-k101-im2ba02.c | 38 u8 data[K101_IM2BA02_INIT_CMD_LEN]; member 43 { .data = { 0xE0, 0x00 } }, 46 { .data = { 0xE1, 0x93} }, 47 { .data = { 0xE2, 0x65 } }, 48 { .data = { 0xE3, 0xF8 } }, 51 { .data = { 0x80, 0x03 } }, 54 { .data = { 0x70, 0x02 } }, 55 { .data = { 0x71, 0x23 } }, 56 { .data = { 0x72, 0x06 } }, 59 { .data = { 0xE0, 0x01 } }, [all …]
|
/linux-6.12.1/drivers/platform/x86/ |
D | lenovo-yogabook.c | 54 int (*set_kbd_backlight)(struct yogabook_data *data, uint8_t level); 65 struct yogabook_data *data = container_of(work, struct yogabook_data, work); in yogabook_work() local 69 if (test_bit(YB_SUSPENDED, &data->flags)) in yogabook_work() 72 if (test_bit(YB_TABLET_MODE, &data->flags)) { in yogabook_work() 75 } else if (test_bit(YB_DIGITIZER_MODE, &data->flags)) { in yogabook_work() 83 if (!kbd_on && test_bit(YB_KBD_IS_ON, &data->flags)) { in yogabook_work() 88 data->set_kbd_backlight(data, 0); in yogabook_work() 89 device_release_driver(data->kbd_dev); in yogabook_work() 90 clear_bit(YB_KBD_IS_ON, &data->flags); in yogabook_work() 93 if (!digitizer_on && test_bit(YB_DIGITIZER_IS_ON, &data->flags)) { in yogabook_work() [all …]
|
/linux-6.12.1/drivers/leds/trigger/ |
D | ledtrig-pattern.c | 47 static void pattern_trig_update_patterns(struct pattern_trig_data *data) in pattern_trig_update_patterns() argument 49 data->curr = data->next; in pattern_trig_update_patterns() 50 if (!data->is_indefinite && data->curr == data->patterns) in pattern_trig_update_patterns() 51 data->repeat--; in pattern_trig_update_patterns() 53 if (data->next == data->patterns + data->npatterns - 1) in pattern_trig_update_patterns() 54 data->next = data->patterns; in pattern_trig_update_patterns() 56 data->next++; in pattern_trig_update_patterns() 58 data->delta_t = 0; in pattern_trig_update_patterns() 61 static int pattern_trig_compute_brightness(struct pattern_trig_data *data) in pattern_trig_compute_brightness() argument 70 if (data->delta_t == 0 || data->curr->delta_t < UPDATE_INTERVAL) in pattern_trig_compute_brightness() [all …]
|
/linux-6.12.1/drivers/gnss/ |
D | sirf.c | 29 * If no data arrives for this time, we assume that the chip is off. 32 * low value. Also power saving settings (like send data only on movement) 58 static int sirf_serdev_open(struct sirf_data *data) in sirf_serdev_open() argument 62 mutex_lock(&data->serdev_mutex); in sirf_serdev_open() 63 if (++data->serdev_count == 1) { in sirf_serdev_open() 64 ret = serdev_device_open(data->serdev); in sirf_serdev_open() 66 data->serdev_count--; in sirf_serdev_open() 70 serdev_device_set_baudrate(data->serdev, data->speed); in sirf_serdev_open() 71 serdev_device_set_flow_control(data->serdev, false); in sirf_serdev_open() 75 mutex_unlock(&data->serdev_mutex); in sirf_serdev_open() [all …]
|
/linux-6.12.1/drivers/net/wireless/broadcom/b43/ |
D | phy_lp.c | 497 u8 data[6]; member 510 { .freq = 12000, .data[0] = 6, .data[1] = 6, .data[2] = 6, in lpphy_2062_init() 511 .data[3] = 6, .data[4] = 10, .data[5] = 6, }, in lpphy_2062_init() 512 { .freq = 13000, .data[0] = 4, .data[1] = 4, .data[2] = 4, in lpphy_2062_init() 513 .data[3] = 4, .data[4] = 11, .data[5] = 7, }, in lpphy_2062_init() 514 { .freq = 14400, .data[0] = 3, .data[1] = 3, .data[2] = 3, in lpphy_2062_init() 515 .data[3] = 3, .data[4] = 12, .data[5] = 7, }, in lpphy_2062_init() 516 { .freq = 16200, .data[0] = 3, .data[1] = 3, .data[2] = 3, in lpphy_2062_init() 517 .data[3] = 3, .data[4] = 13, .data[5] = 8, }, in lpphy_2062_init() 518 { .freq = 18000, .data[0] = 2, .data[1] = 2, .data[2] = 2, in lpphy_2062_init() [all …]
|
/linux-6.12.1/drivers/clk/meson/ |
D | gxbb.h | 13 * Register offsets from the data sheet are listed in comment blocks below. 17 #define SCR 0x2C /* 0x0b offset in data sheet */ 18 #define TIMEOUT_VALUE 0x3c /* 0x0f offset in data sheet */ 20 #define HHI_GP0_PLL_CNTL 0x40 /* 0x10 offset in data sheet */ 21 #define HHI_GP0_PLL_CNTL2 0x44 /* 0x11 offset in data sheet */ 22 #define HHI_GP0_PLL_CNTL3 0x48 /* 0x12 offset in data sheet */ 23 #define HHI_GP0_PLL_CNTL4 0x4c /* 0x13 offset in data sheet */ 24 #define HHI_GP0_PLL_CNTL5 0x50 /* 0x14 offset in data sheet */ 25 #define HHI_GP0_PLL_CNTL1 0x58 /* 0x16 offset in data sheet */ 27 #define HHI_XTAL_DIVN_CNTL 0xbc /* 0x2f offset in data sheet */ [all …]
|
/linux-6.12.1/drivers/power/supply/ |
D | sc27xx_fuel_gauge.c | 124 static int sc27xx_fgu_cap_to_clbcnt(struct sc27xx_fgu_data *data, int capacity); 125 static void sc27xx_fgu_capacity_calibration(struct sc27xx_fgu_data *data, 127 static void sc27xx_fgu_adjust_cap(struct sc27xx_fgu_data *data, int cap); 128 static int sc27xx_fgu_get_temp(struct sc27xx_fgu_data *data, int *temp); 137 static int sc27xx_fgu_adc_to_current(struct sc27xx_fgu_data *data, s64 adc) in sc27xx_fgu_adc_to_current() argument 139 return DIV_S64_ROUND_CLOSEST(adc * 1000, data->cur_1000ma_adc); in sc27xx_fgu_adc_to_current() 142 static int sc27xx_fgu_adc_to_voltage(struct sc27xx_fgu_data *data, s64 adc) in sc27xx_fgu_adc_to_voltage() argument 144 return DIV_S64_ROUND_CLOSEST(adc * 1000, data->vol_1000mv_adc); in sc27xx_fgu_adc_to_voltage() 147 static int sc27xx_fgu_voltage_to_adc(struct sc27xx_fgu_data *data, int vol) in sc27xx_fgu_voltage_to_adc() argument 149 return DIV_ROUND_CLOSEST(vol * data->vol_1000mv_adc, 1000); in sc27xx_fgu_voltage_to_adc() [all …]
|
D | max8903_charger.c | 49 struct max8903_data *data = power_supply_get_drvdata(psy); in max8903_get_property() local 54 if (data->chg) { in max8903_get_property() 55 if (gpiod_get_value(data->chg)) in max8903_get_property() 58 else if (data->usb_in || data->ta_in) in max8903_get_property() 66 if (data->usb_in || data->ta_in) in max8903_get_property() 71 if (data->fault) in max8903_get_property() 83 struct max8903_data *data = _data; in max8903_dcin() local 94 ta_in = gpiod_get_value(data->dok); in max8903_dcin() 96 if (ta_in == data->ta_in) in max8903_dcin() 99 data->ta_in = ta_in; in max8903_dcin() [all …]
|
/linux-6.12.1/drivers/input/misc/ |
D | cma3000_d0x.c | 73 #define CMA3000_READ(data, reg, msg) \ argument 74 (data->bus_ops->read(data->dev, reg, msg)) 75 #define CMA3000_SET(data, reg, val, msg) \ argument 76 ((data)->bus_ops->write(data->dev, reg, val, msg)) 95 static void decode_mg(struct cma3000_accl_data *data, int *datax, in decode_mg() argument 98 /* Data in 2's complement, convert to mg */ in decode_mg() 99 *datax = ((s8)*datax) * data->bit_to_mg; in decode_mg() 100 *datay = ((s8)*datay) * data->bit_to_mg; in decode_mg() 101 *dataz = ((s8)*dataz) * data->bit_to_mg; in decode_mg() 106 struct cma3000_accl_data *data = dev_id; in cma3000_thread_irq() local [all …]
|
/linux-6.12.1/drivers/net/ethernet/tundra/ |
D | tsi108_eth.c | 149 struct tsi108_prv_data *data = netdev_priv(dev); in dump_eth_one() local 155 TSI_READ(TSI108_EC_INTMASK), data->phy_ok, in dump_eth_one() 156 data->link_up, data->speed, data->duplex); in dump_eth_one() 159 data->txhead, data->txtail, data->txfree, in dump_eth_one() 166 data->rxhead, data->rxtail, data->rxfree, in dump_eth_one() 169 TSI_READ(TSI108_EC_RXERR), data->rxpending); in dump_eth_one() 180 static int tsi108_read_mii(struct tsi108_prv_data *data, int reg) in tsi108_read_mii() argument 185 (data->phy << TSI108_MAC_MII_ADDR_PHY) | in tsi108_read_mii() 202 static void tsi108_write_mii(struct tsi108_prv_data *data, in tsi108_write_mii() argument 207 (data->phy << TSI108_MAC_MII_ADDR_PHY) | in tsi108_write_mii() [all …]
|
/linux-6.12.1/drivers/iio/pressure/ |
D | bmp280-core.c | 305 static int bmp280_read_calib(struct bmp280_data *data) in bmp280_read_calib() argument 307 struct bmp280_calib *calib = &data->calib.bmp280; in bmp280_read_calib() 311 ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_TEMP_START, in bmp280_read_calib() 312 data->bmp280_cal_buf, in bmp280_read_calib() 313 sizeof(data->bmp280_cal_buf)); in bmp280_read_calib() 315 dev_err(data->dev, in bmp280_read_calib() 320 /* Toss calibration data into the entropy pool */ in bmp280_read_calib() 321 add_device_randomness(data->bmp280_cal_buf, in bmp280_read_calib() 322 sizeof(data->bmp280_cal_buf)); in bmp280_read_calib() 325 calib->T1 = le16_to_cpu(data->bmp280_cal_buf[T1]); in bmp280_read_calib() [all …]
|
/linux-6.12.1/arch/powerpc/platforms/powernv/ |
D | pci.c | 194 struct OpalIoP7IOCPhbErrorData *data; in pnv_pci_dump_p7ioc_diag_data() local 196 data = (struct OpalIoP7IOCPhbErrorData *)common; in pnv_pci_dump_p7ioc_diag_data() 197 pr_info("P7IOC PHB#%x Diag-data (Version: %d)\n", in pnv_pci_dump_p7ioc_diag_data() 200 if (data->brdgCtl) in pnv_pci_dump_p7ioc_diag_data() 202 be32_to_cpu(data->brdgCtl)); in pnv_pci_dump_p7ioc_diag_data() 203 if (data->portStatusReg || data->rootCmplxStatus || in pnv_pci_dump_p7ioc_diag_data() 204 data->busAgentStatus) in pnv_pci_dump_p7ioc_diag_data() 206 be32_to_cpu(data->portStatusReg), in pnv_pci_dump_p7ioc_diag_data() 207 be32_to_cpu(data->rootCmplxStatus), in pnv_pci_dump_p7ioc_diag_data() 208 be32_to_cpu(data->busAgentStatus)); in pnv_pci_dump_p7ioc_diag_data() [all …]
|
/linux-6.12.1/drivers/iio/proximity/ |
D | sx_common.c | 61 struct sx_common_data *data = iio_priv(indio_dev); in sx_common_irq_handler() local 63 if (data->trigger_enabled) in sx_common_irq_handler() 64 iio_trigger_poll(data->trig); in sx_common_irq_handler() 78 struct sx_common_data *data = iio_priv(indio_dev); in sx_common_push_events() local 83 ret = regmap_read(data->regmap, data->chip_info->reg_stat, &val); in sx_common_push_events() 85 dev_err(&data->client->dev, "i2c transfer error in irq\n"); in sx_common_push_events() 89 val >>= data->chip_info->stat_offset; in sx_common_push_events() 95 prox_changed = (data->chan_prox_stat ^ val) & data->chan_event; in sx_common_push_events() 97 for_each_set_bit(chan, &prox_changed, data->chip_info->num_channels) { in sx_common_push_events() 107 data->chan_prox_stat = val; in sx_common_push_events() [all …]
|
/linux-6.12.1/drivers/spi/ |
D | spi-topcliff-pch.c | 26 #define PCH_SPDWR 0x0C /* SPI write data register */ 27 #define PCH_SPDRR 0x10 /* SPI read data register */ 136 * @bpw_len: Length of data to be transferred in bits per 139 * @tx_index: Transmit data count; for bookkeeping during 141 * @rx_index: Receive data count; for bookkeeping during 143 * @pkt_tx_buff: Buffer for data to be transmitted 144 * @pkt_rx_buff: Buffer for received data 153 * @board_dat: Reference to the SPI device data structure 159 * @save_total_len: Save length while data is being transferred 225 struct pch_spi_data *data = spi_controller_get_devdata(host); in pch_spi_writereg() local [all …]
|
/linux-6.12.1/drivers/gpu/drm/amd/amdgpu/ |
D | nbio_v6_1.c | 167 uint32_t def, data; in nbio_v6_1_update_medium_grain_clock_gating() local 169 def = data = RREG32_PCIE(smnCPM_CONTROL); in nbio_v6_1_update_medium_grain_clock_gating() 171 data |= (CPM_CONTROL__LCLK_DYN_GATE_ENABLE_MASK | in nbio_v6_1_update_medium_grain_clock_gating() 179 data &= ~(CPM_CONTROL__LCLK_DYN_GATE_ENABLE_MASK | in nbio_v6_1_update_medium_grain_clock_gating() 188 if (def != data) in nbio_v6_1_update_medium_grain_clock_gating() 189 WREG32_PCIE(smnCPM_CONTROL, data); in nbio_v6_1_update_medium_grain_clock_gating() 195 uint32_t def, data; in nbio_v6_1_update_medium_grain_light_sleep() local 197 def = data = RREG32_PCIE(smnPCIE_CNTL2); in nbio_v6_1_update_medium_grain_light_sleep() 199 data |= (PCIE_CNTL2__SLV_MEM_LS_EN_MASK | in nbio_v6_1_update_medium_grain_light_sleep() 203 data &= ~(PCIE_CNTL2__SLV_MEM_LS_EN_MASK | in nbio_v6_1_update_medium_grain_light_sleep() [all …]
|
/linux-6.12.1/drivers/usb/typec/ |
D | rt1719.c | 120 static int rt1719_read16(struct rt1719_data *data, unsigned int reg, u16 *val) in rt1719_read16() argument 125 ret = regmap_raw_read(data->regmap, reg, ®val, sizeof(regval)); in rt1719_read16() 133 static int rt1719_read32(struct rt1719_data *data, unsigned int reg, u32 *val) in rt1719_read32() argument 138 ret = regmap_raw_read(data->regmap, reg, ®val, sizeof(regval)); in rt1719_read32() 146 static int rt1719_write32(struct rt1719_data *data, unsigned int reg, u32 val) in rt1719_write32() argument 150 return regmap_raw_write(data->regmap, reg, ®val, sizeof(regval)); in rt1719_write32() 191 static void rt1719_set_data_role(struct rt1719_data *data, in rt1719_set_data_role() argument 204 usb_role_switch_set_role(data->role_sw, usb_role); in rt1719_set_data_role() 205 typec_set_data_role(data->port, data_role); in rt1719_set_data_role() 208 static void rt1719_update_data_role(struct rt1719_data *data) in rt1719_update_data_role() argument [all …]
|
/linux-6.12.1/tools/perf/util/ |
D | data.c | 16 #include "data.h" 32 void perf_data__close_dir(struct perf_data *data) in perf_data__close_dir() argument 34 close_dir(data->dir.files, data->dir.nr); in perf_data__close_dir() 37 int perf_data__create_dir(struct perf_data *data, int nr) in perf_data__create_dir() argument 43 if (WARN_ON(!data->is_dir)) in perf_data__create_dir() 53 ret = asprintf(&file->path, "%s/data.%d", data->path, i); in perf_data__create_dir() 63 * If using parallel threads to collect data, in perf_data__create_dir() 78 data->dir.version = PERF_DIR_VERSION; in perf_data__create_dir() 79 data->dir.files = files; in perf_data__create_dir() 80 data->dir.nr = nr; in perf_data__create_dir() [all …]
|
/linux-6.12.1/lib/pldmfw/ |
D | pldmfw.c | 54 * @data: pointer to private data 58 * Verify that the firmware data can hold a chunk of bytes with the specified 65 pldm_check_fw_space(struct pldmfw_priv *data, size_t offset, size_t length) in pldm_check_fw_space() argument 68 struct device *dev = data->context->dev; in pldm_check_fw_space() 70 if (data->fw->size < expected_size) { in pldm_check_fw_space() 72 data->fw->size, expected_size); in pldm_check_fw_space() 81 * @data: pointer to private data 91 pldm_move_fw_offset(struct pldmfw_priv *data, size_t bytes_to_move) in pldm_move_fw_offset() argument 95 err = pldm_check_fw_space(data, data->offset, bytes_to_move); in pldm_move_fw_offset() 99 data->offset += bytes_to_move; in pldm_move_fw_offset() [all …]
|