/linux-6.12.1/Documentation/hwmon/ |
D | lm90.rst | 10 Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e 18 Addresses scanned: I2C 0x4c 28 Addresses scanned: I2C 0x4c and 0x4d 38 Addresses scanned: I2C 0x4c and 0x4d 48 Addresses scanned: I2C 0x4c 58 Addresses scanned: I2C 0x4c - 0x4e 66 Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e 74 Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e 82 Addresses scanned: I2C 0x4c and 0x4d 92 Addresses scanned: I2C 0x4c and 0x4d [all …]
|
D | tmp421.rst | 10 Addresses scanned: I2C 0x2a, 0x4c, 0x4d, 0x4e and 0x4f 18 Addresses scanned: I2C 0x4c, 0x4d, 0x4e and 0x4f 26 Addresses scanned: I2C 0x4c and 0x4d 34 Addresses scanned: I2C 0x2a, 0x4c, 0x4d, 0x4e and 0x4f 42 Addresses scanned: I2C 0x4c and 0x4d
|
D | emc1403.rst | 8 Addresses scanned: I2C 0x18, 0x1c, 0x29, 0x4c, 0x4d, 0x5c 19 Addresses scanned: I2C 0x18, 0x29, 0x4c, 0x4d 30 Addresses scanned: I2C 0x4c 40 Addresses scanned: I2C 0x4c 50 Addresses scanned: I2C 0x18, 0x4c, 0x4d
|
D | tmp401.rst | 10 Addresses scanned: I2C 0x4c 18 Addresses scanned: I2C 0x4c, 0x4d, 0x4e 26 Addresses scanned: I2C 0x4c, 0x4d 34 Addresses scanned: I2C 0x4c, 0x4d 42 Addresses scanned: I2C 0x48 - 0x4f
|
D | lm95245.rst | 8 Addresses scanned: I2C 0x18, 0x29, 0x4c 16 Addresses scanned: I2C 0x18, 0x19, 0x29, 0x4c, 0x4d
|
/linux-6.12.1/drivers/media/i2c/ |
D | gc2145.c | 8 …* Datasheet v1.0 available at http://files.pine64.org/doc/datasheet/PinebookPro/GC2145%20CSP%20Dat… 29 #define GC2145_CHIP_ID 0x2145 31 /* Page 0 */ 32 #define GC2145_REG_EXPOSURE CCI_REG16(0x03) 33 #define GC2145_REG_HBLANK CCI_REG16(0x05) 34 #define GC2145_REG_VBLANK CCI_REG16(0x07) 35 #define GC2145_REG_ROW_START CCI_REG16(0x09) 36 #define GC2145_REG_COL_START CCI_REG16(0x0b) 37 #define GC2145_REG_WIN_HEIGHT CCI_REG16(0x0d) 38 #define GC2145_REG_WIN_WIDTH CCI_REG16(0x0f) [all …]
|
/linux-6.12.1/drivers/edac/ |
D | pnd2_edac.h | 17 #define b_cr_touud_lo_pci_port 0x4c 18 #define b_cr_touud_lo_pci_offset 0xa8 19 #define b_cr_touud_lo_pci_r_opcode 0x04 26 #define b_cr_touud_hi_pci_port 0x4c 27 #define b_cr_touud_hi_pci_offset 0xac 28 #define b_cr_touud_hi_pci_r_opcode 0x04 36 #define b_cr_tolud_pci_port 0x4c 37 #define b_cr_tolud_pci_offset 0xbc 38 #define b_cr_tolud_pci_r_opcode 0x04 71 #define b_cr_slice_channel_hash_port 0x4c [all …]
|
/linux-6.12.1/drivers/isdn/mISDN/ |
D | dsp_tones.c | 45 0x80, 0xab, 0x81, 0x6d, 0xfd, 0xdd, 0x5d, 0x9d, 46 0x4d, 0xd1, 0x89, 0x88, 0xd0, 0x4c, 0x9c, 0x5c, 47 0xdc, 0xfc, 0x6c, 48 0x80, 0xab, 0x81, 0x6d, 0xfd, 0xdd, 0x5d, 0x9d, 49 0x4d, 0xd1, 0x89, 0x88, 0xd0, 0x4c, 0x9c, 0x5c, 50 0xdc, 0xfc, 0x6c, 51 0x80, 0xab, 0x81, 0x6d, 0xfd, 0xdd, 0x5d, 0x9d, 52 0x4d, 0xd1, 0x89, 0x88, 0xd0, 0x4c, 0x9c, 0x5c, 53 0xdc, 0xfc, 0x6c, 54 0x80, 0xab, 0x81, 0x6d, 0xfd, 0xdd, 0x5d, 0x9d, [all …]
|
/linux-6.12.1/tools/testing/selftests/bpf/ |
D | ip_check_defrag_frags.h | 10 0x45, 0x0, 0x0, 0x2c, 0x0, 0x1, 0x20, 0x0, 0x40, 0x11, 11 0xac, 0xe8, 0x0, 0x0, 0x0, 0x0, 0xac, 0x10, 0x1, 0xc8, 12 0xbe, 0xee, 0xbe, 0xef, 0x0, 0x3a, 0x0, 0x0, 0x54, 0x48, 13 0x49, 0x53, 0x20, 0x49, 0x53, 0x20, 0x54, 0x48, 0x45, 0x20, 14 0x4f, 0x52, 0x49, 0x47, 17 0x45, 0x0, 0x0, 0x2c, 0x0, 0x1, 0x20, 0x3, 0x40, 0x11, 18 0xac, 0xe5, 0x0, 0x0, 0x0, 0x0, 0xac, 0x10, 0x1, 0xc8, 19 0x49, 0x4e, 0x41, 0x4c, 0x20, 0x4d, 0x45, 0x53, 0x53, 0x41, 20 0x47, 0x45, 0x2c, 0x20, 0x50, 0x4c, 0x45, 0x41, 0x53, 0x45, 21 0x20, 0x52, 0x45, 0x41, [all …]
|
/linux-6.12.1/crypto/ |
D | testmgr.h | 33 * @ksize: Length of @key in bytes (0 if no key) 103 * @crypt_error: When @novrfy=0, the expected error from encrypt(). When 225 "\x9f\x6e\xbd\x4c\x55\x84\x0c\x9b\xcf\x1a\x4b\x51\x1e\x9e\x0c\x06", 267 "\x54\x49\x4C\xA6\x3E\xBA\x03\x37\xE4\xE2\x40\x23\xFC\xD6\x9A\x5A" 272 "\x47\x1E\x02\x90\xFF\x0A\xF0\x75\x03\x51\xB7\xF8\x78\x86\x4C\xA9" 273 "\x61\xAD\xBD\x3A\x8A\x7E\x99\x1C\x5C\x05\x56\xA9\x4C\x31\x46\xA7" 292 "\x13\xb4\xc1\xa1\x11\xfc\x40\x2f\x4c\x9d\xdf\x16\x76\x11\x20\x6b", 349 "\x09\xA6\x39\x3A\xEA\xA8\xB4\x45\x4B\x36\x10\x4C\xE4\x00\x66\x71" 361 "\x64\x3B\x8B\xA9\x33\xB3\xC5\x94\x9B\x4C\x5D\x9C\x7C\x46\xA4\xA5" 369 "\x76\x10\x93\x77\x41\x04\xAB\x4C\xED\x6A\xCC\x14\x1B\x99\x8D\x0C" [all …]
|
D | dh.c | 27 memset(ctx, 0, sizeof(*ctx)); in dh_clear_ctx() 50 return (p_len < 2048) ? -EINVAL : 0; in dh_check_params_length() 52 return (p_len < 1536) ? -EINVAL : 0; in dh_check_params_length() 68 return 0; in dh_set_params() 80 if (crypto_dh_decode_key(buf, len, ¶ms) < 0) in dh_set_secret() 83 if (dh_set_params(ctx, ¶ms) < 0) in dh_set_secret() 90 return 0; in dh_set_secret() 113 return 0; in dh_is_pubkey_valid() 126 if (mpi_cmp_ui(y, 1) < 1 || mpi_cmp(y, ctx->p) >= 0) in dh_is_pubkey_valid() 134 val = mpi_alloc(0); in dh_is_pubkey_valid() [all …]
|
/linux-6.12.1/drivers/hid/ |
D | hid-uclogic-core-test.c | 22 .event = { 0xA1, 0xB2, 0xC3, 0xD4 }, 26 .event = { 0x1F, 0x2E, 0x3D, 0x4C, 0x5B, 0x6A }, 33 .event = { 0xA1, 0xB2, 0xC3, 0xD4 }, 38 .event = { 0x1F, 0x2E, 0x3D, 0x4C, 0x5B, 0x6A }, 43 .event = { 0xA1, 0xB2, 0xC3 }, 48 .event = { 0xA1, 0xB2, 0xC3, 0xD4, 0x00 }, 53 .event = { 0x2E, 0x3D, 0x4C, 0x5B, 0x6A, 0x1F }, 66 struct uclogic_params p = {0, }; in hid_test_uclogic_exec_event_hook_test() 76 for (n = 0; n < ARRAY_SIZE(hook_events); n++) { in hid_test_uclogic_exec_event_hook_test() 83 memcpy(filter->event, &hook_events[n].event[0], filter->size); in hid_test_uclogic_exec_event_hook_test() [all …]
|
/linux-6.12.1/lib/crypto/ |
D | aesgcm.c | 43 * Returns: 0 on success, or -EINVAL if @keysize or @authsize contain values 60 return 0; in aesgcm_expandkey() 67 while (len > 0) { in aesgcm_ghash() 114 while (len > 0) { in aesgcm_crypt() 224 "\x2e\x4c\x30\x3d\x8a\x31\x8a\x72" 246 "\x2e\x4c\x30\x3d\x8a\x31\x8a\x72" 278 "\x2e\x4c\x30\x3d\x8a\x31\x8a\x72" 310 "\x2e\x4c\x30\x3d\x8a\x31\x8a\x72" 332 "\x2e\x4c\x30\x3d\x8a\x31\x8a\x72" 354 "\x2e\x4c\x30\x3d\x8a\x31\x8a\x72" [all …]
|
/linux-6.12.1/drivers/hwmon/ |
D | lm90.c | 33 * in a detection as max6657 if it is on address 0x4c. The extra address 35 * explicitly as max6659, or if its address is not 0x4c. 51 * from 0 to 145 degrees. 122 * MAX6657, MAX6658, NCT1008 and W83L771 have address 0x4c. 124 * have address 0x4d. 125 * MAX6647 has address 0x4e. 126 * MAX6659 can have address 0x4c, 0x4d or 0x4e. 127 * MAX6654, MAX6680, and MAX6681 can have address 0x18, 0x19, 0x1a, 0x29, 128 * 0x2a, 0x2b, 0x4c, 0x4d or 0x4e. 129 * SA56004 can have address 0x48 through 0x4F. [all …]
|
/linux-6.12.1/drivers/gpu/drm/nouveau/nvkm/subdev/therm/ |
D | ic.c | 50 "Found an %s at address 0x%x (controlled by lm_sensors, " in probe_monitoring_device() 59 { { I2C_BOARD_INFO("w83l785ts", 0x2d) }, 0 }, 60 { { I2C_BOARD_INFO("w83781d", 0x2d) }, 0 }, 61 { { I2C_BOARD_INFO("adt7473", 0x2e) }, 40 }, 62 { { I2C_BOARD_INFO("adt7473", 0x2d) }, 40 }, 63 { { I2C_BOARD_INFO("adt7473", 0x2c) }, 40 }, 64 { { I2C_BOARD_INFO("f75375", 0x2e) }, 0 }, 65 { { I2C_BOARD_INFO("lm99", 0x4c) }, 0 }, 66 { { I2C_BOARD_INFO("lm90", 0x4c) }, 0 }, 67 { { I2C_BOARD_INFO("lm90", 0x4d) }, 0 }, [all …]
|
/linux-6.12.1/Documentation/devicetree/bindings/mfd/ |
D | brcm,twd.yaml | 54 reg = <0xff800400 0x4c>; 55 ranges = <0x00000000 0xff800400 0x4c>; 60 timer@0 { 62 reg = <0x0 0x28>; 67 reg = <0x28 0x8>;
|
/linux-6.12.1/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/ |
D | led.c | 24 REG_LEDCFG2, (ledcfg & 0xf0) | BIT(5)); in rtl8821ae_sw_led_on() 28 rtl_write_byte(rtlpriv, REG_LEDCFG1, ledcfg & 0x10); in rtl8821ae_sw_led_on() 40 u8 ledcfg = 0; in rtl8812ae_sw_led_on() 62 ledcfg |= BIT(5); /*Set 0x4c[21]*/ in rtl8812ae_sw_led_on() 63 ledcfg &= ~(BIT(7) | BIT(6) | BIT(3) | BIT(2) | BIT(1) | BIT(0)); in rtl8812ae_sw_led_on() 64 /*Clear 0x4c[23:22] and 0x4c[19:16]*/ in rtl8812ae_sw_led_on() 82 ledcfg &= 0xf0; in rtl8821ae_sw_led_off() 84 ledcfg &= 0x90; /* Set to software control. */ in rtl8821ae_sw_led_off() 87 ledcfg &= 0xFE; in rtl8821ae_sw_led_off() 97 ledcfg &= 0x10; /* Set to software control. */ in rtl8821ae_sw_led_off() [all …]
|
/linux-6.12.1/drivers/scsi/aic7xxx/ |
D | aic79xx_seq.h_shipped | 9 0xff, 0x02, 0x06, 0x78, 10 0x00, 0xea, 0x6e, 0x59, 11 0x01, 0xea, 0x04, 0x30, 12 0xff, 0x04, 0x0c, 0x78, 13 0x19, 0xea, 0x6e, 0x59, 14 0x19, 0xea, 0x04, 0x00, 15 0x33, 0xea, 0x68, 0x59, 16 0x33, 0xea, 0x00, 0x00, 17 0x60, 0x3a, 0x3a, 0x68, 18 0x04, 0x4d, 0x35, 0x78, [all …]
|
/linux-6.12.1/Documentation/devicetree/bindings/hwmon/ |
D | ti,tmp421.yaml | 31 const: 0 40 "^channel@([0-3])$": 48 The channel number. 0 is local channel, 1-3 are remote channels 50 minimum: 0 74 #size-cells = <0>; 78 reg = <0x4c>; 84 #size-cells = <0>; 88 reg = <0x4c>; 90 #size-cells = <0>; 92 channel@0 { [all …]
|
D | ti,tmp401.yaml | 50 minimum: 0 85 #size-cells = <0>; 89 reg = <0x4c>; 95 #size-cells = <0>; 99 reg = <0x4c>; 101 ti,n-factor = <0x3b>; 102 ti,beta-compensation = <0x7>;
|
/linux-6.12.1/Documentation/devicetree/bindings/sound/ |
D | ti,tas2562.yaml | 37 I2C address of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f 58 enum: [0, 1] 71 #size-cells = <0>; 74 reg = <0x4c>; 75 #sound-dai-cells = <0>; 78 shutdown-gpios = <&gpio1 15 0>; 79 ti,imon-slot-no = <0>;
|
/linux-6.12.1/sound/soc/codecs/ |
D | pcm6240.h | 43 #define PCMDEV_GENERIC_VOL_CTRL 0x0 44 #define PCMDEV_PCM1690_VOL_CTRL 0x1 45 #define PCMDEV_PCM1690_FINE_VOL_CTRL 0x2 64 #define PCMDEVICE_PAGE_SELECT 0x00 66 #define PCMDEVICE_REG_SWRESET PCMDEVICE_REG(0X0, 0x01) 67 #define PCMDEVICE_REG_SWRESET_RESET BIT(0) 69 #define ADC5120_REG_CH1_ANALOG_GAIN PCMDEVICE_REG(0X0, 0x3d) 70 #define ADC5120_REG_CH1_DIGITAL_GAIN PCMDEVICE_REG(0X0, 0x3e) 71 #define ADC5120_REG_CH2_ANALOG_GAIN PCMDEVICE_REG(0X0, 0x42) 72 #define ADC5120_REG_CH2_DIGITAL_GAIN PCMDEVICE_REG(0X0, 0x43) [all …]
|
/linux-6.12.1/drivers/net/wireless/intersil/p54/ |
D | p54spi_eeprom.h | 19 0x47, 0x4d, 0x55, 0xaa, /* magic */ 20 0x00, 0x00, /* pad */ 21 0x00, 0x00, /* eeprom_pda_data_wrap length */ 22 0x00, 0x00, 0x00, 0x00, /* arm opcode */ 25 0x04, 0x00, 0x01, 0x01, /* PDR_MAC_ADDRESS */ 26 0x00, 0x02, 0xee, 0xc0, 0xff, 0xee, 29 0x06, 0x00, 0x01, 0x10, /* PDR_INTERFACE_LIST */ 30 0x00, 0x00, /* role */ 31 0x0f, 0x00, /* if_id */ 32 0x85, 0x00, /* variant = Longbow RF, 2GHz */ [all …]
|
/linux-6.12.1/drivers/usb/serial/ |
D | iuu_phoenix.c | 100 return 0; in iuu_port_probe() 121 dev_dbg(&port->dev, "%s msg : SET = 0x%04x, CLEAR = 0x%04x\n", in iuu_tiocmset() 134 return 0; in iuu_tiocmset() 138 * When a card is present, the response is 0x00 198 priv->reset = 0; in iuu_reset() 204 * 0x00 = no card 205 * 0x01 = smartcard 206 * 0x02 = sim card 224 switch (st[0]) { in iuu_update_status_callback() 225 case 0x1: in iuu_update_status_callback() [all …]
|
/linux-6.12.1/drivers/i2c/busses/ |
D | i2c-amd756-s4882.c | 10 * PCA9556 chip at I2C address 0x18. The main adapter is used for 12 * are defined for the multiplexed addresses: 0x50-0x53 (memory 13 * module EEPROM) located on channels 1-4, and 0x4c (LM63) 14 * located on multiplexed channels 0 and 5-7. We define one 17 * CPU0: virtual adapter 1, channels 1 and 0 46 if (addr == 0x4c || (addr & 0xfc) == 0x50 || (addr & 0xfc) == 0x30 in amd756_access_virt0() 47 || addr == 0x18) in amd756_access_virt0() 75 if (addr != 0x4c && (addr & 0xfc) != 0x50 && (addr & 0xfc) != 0x30) in amd756_access_channel() 84 error = amd756_smbus.algo->smbus_xfer(adap, 0x18, 0, in amd756_access_channel() 85 I2C_SMBUS_WRITE, 0x01, in amd756_access_channel() [all …]
|