/linux-6.12.1/arch/mips/include/asm/mach-ath79/ |
D | ar71xx_regs.h | 19 #define AR71XX_APB_BASE 0x18000000 20 #define AR71XX_GE0_BASE 0x19000000 21 #define AR71XX_GE0_SIZE 0x10000 22 #define AR71XX_GE1_BASE 0x1a000000 23 #define AR71XX_GE1_SIZE 0x10000 24 #define AR71XX_EHCI_BASE 0x1b000000 25 #define AR71XX_EHCI_SIZE 0x1000 26 #define AR71XX_OHCI_BASE 0x1c000000 27 #define AR71XX_OHCI_SIZE 0x1000 28 #define AR71XX_SPI_BASE 0x1f000000 [all …]
|
/linux-6.12.1/Documentation/devicetree/bindings/bus/ |
D | qcom,ebi2.yaml | 31 CS0 GPIO134 0x1a800000-0x1b000000 (8MB) 32 CS1 GPIO39 (A) / GPIO123 (B) 0x1b000000-0x1b800000 (8MB) 33 CS2 GPIO40 (A) / GPIO124 (B) 0x1b800000-0x1c000000 (8MB) 34 CS3 GPIO133 0x1d000000-0x25000000 (128 MB) 35 CS4 GPIO132 0x1c800000-0x1d000000 (8MB) 36 CS5 GPIO131 0x1c000000-0x1c800000 (8MB) 105 "^.*@[0-5],[0-9a-f]+$": 120 actually 1, so a value of 0 will still yield 1 recovery cycle. 121 minimum: 0 129 asserted. With a hold of 1 (value = 0), the CS stays active [all …]
|
/linux-6.12.1/Documentation/devicetree/bindings/clock/ |
D | mediatek,ethsys.yaml | 52 reg = <0x1b000000 0x1000>;
|
D | mediatek,mt8192-clock.yaml | 56 reg = <0x10720000 0x1000>; 63 reg = <0x11007000 0x1000>; 70 reg = <0x11cb1000 0x1000>; 77 reg = <0x11d03000 0x1000>; 84 reg = <0x11d23000 0x1000>; 91 reg = <0x11e01000 0x1000>; 98 reg = <0x11f02000 0x1000>; 105 reg = <0x11f10000 0x1000>; 112 reg = <0x13fbf000 0x1000>; 119 reg = <0x15020000 0x1000>; [all …]
|
D | mediatek,mt8195-clock.yaml | 68 reg = <0x10720000 0x1000>; 75 reg = <0x11d03000 0x1000>; 82 reg = <0x11e05000 0x1000>; 89 reg = <0x13fbf000 0x1000>; 96 reg = <0x14e00000 0x1000>; 103 reg = <0x14e02000 0x1000>; 110 reg = <0x14e03000 0x1000>; 117 reg = <0x15000000 0x1000>; 124 reg = <0x15110000 0x1000>; 131 reg = <0x15130000 0x1000>; [all …]
|
/linux-6.12.1/Documentation/devicetree/bindings/dma/ |
D | apm-xgene-dma.txt | 27 clocks = <&socplldiv2 0>; 28 reg = <0x0 0x1f27c000 0x0 0x1000>; 36 reg = <0x0 0x1f270000 0x0 0x10000>, 37 <0x0 0x1f200000 0x0 0x10000>, 38 <0x0 0x1b000000 0x0 0x400000>, 39 <0x0 0x1054a000 0x0 0x100>; 40 interrupts = <0x0 0x82 0x4>, 41 <0x0 0xb8 0x4>, 42 <0x0 0xb9 0x4>, 43 <0x0 0xba 0x4>, [all …]
|
/linux-6.12.1/Documentation/devicetree/bindings/memory-controllers/ |
D | ingenic,nemc.yaml | 14 pattern: "^memory-controller@[0-9a-f]+$" 40 ".*@[0-9]+$": 61 reg = <0x13410000 0x10000>; 64 ranges = <1 0 0x1b000000 0x1000000>, 65 <2 0 0x1a000000 0x1000000>, 66 <3 0 0x19000000 0x1000000>, 67 <4 0 0x18000000 0x1000000>, 68 <5 0 0x17000000 0x1000000>, 69 <6 0 0x16000000 0x1000000>; 78 pinctrl-0 = <&pins_nemc_cs6>; [all …]
|
/linux-6.12.1/arch/powerpc/crypto/ |
D | aesp10-ppc.pl | 103 $LITTLE_ENDIAN = ($flavour=~/le$/) ? $SIZE_T : 0; 105 $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; 121 my ($zero,$in0,$in1,$key,$rcon,$mask,$tmp)=map("v$_",(0..6)); 131 .long 0x01000000, 0x01000000, 0x01000000, 0x01000000 ?rev 132 .long 0x1b000000, 0x1b000000, 0x1b000000, 0x1b000000 ?rev 133 .long 0x0d0e0f0c, 0x0d0e0f0c, 0x0d0e0f0c, 0x0d0e0f0c ?rev 134 .long 0,0,0,0 ?asis 139 addi $ptr,$ptr,-0x48 142 .long 0 143 .byte 0,12,0x14,0,0,0,0,0 [all …]
|
/linux-6.12.1/arch/arm/configs/ |
D | lpc18xx_defconfig | 21 CONFIG_DRAM_BASE=0x28000000 22 CONFIG_DRAM_SIZE=0x02000000 23 CONFIG_FLASH_MEM_BASE=0x1b000000 24 CONFIG_FLASH_SIZE=0x00080000
|
/linux-6.12.1/Documentation/devicetree/bindings/mtd/ |
D | ingenic,nand.yaml | 66 reg = <0x13410000 0x10000>; 69 ranges = <1 0 0x1b000000 0x1000000>, 70 <2 0 0x1a000000 0x1000000>, 71 <3 0 0x19000000 0x1000000>, 72 <4 0 0x18000000 0x1000000>, 73 <5 0 0x17000000 0x1000000>, 74 <6 0 0x16000000 0x1000000>; 80 reg = <1 0 0x1000000>; 83 #size-cells = <0>; 94 pinctrl-0 = <&pins_nemc>; [all …]
|
/linux-6.12.1/arch/arc/boot/dts/ |
D | axc001.dtsi | 23 ranges = <0x00000000 0x0 0xf0000000 0x10000000>; 26 #clock-cells = <0>; 32 #clock-cells = <0>; 49 reg = < 0x2000 0x80 >; 51 #size-cells = <0>; 53 ictl_intc: gpio-controller@0 { 58 reg = <0>; 68 reg = <0x5000 0x100>; 97 reg = < 0x0 0xe0012000 0x0 0x200 >; 106 reg = <0x0 0x80000000 0x0 0x1b000000>; /* (512 - 32) MiB */ [all …]
|
/linux-6.12.1/arch/mips/alchemy/devboards/ |
D | db1000.c | 50 return 0; in db1000_board_setup() 57 if ((slot < 12) || (slot > 13) || pin == 0) in db1500_map_pci_irq() 60 return (pin == 1) ? AU1500_PCI_INTA : 0xff; in db1500_map_pci_irq() 75 [0] = { 77 .end = AU1500_PCI_PHYS_ADDR + 0xfff, 89 .id = 0, 100 [0] = { 102 .end = AU1100_LCD_PHYS_ADDR + 0x800 - 1, 114 .id = 0, 124 [0] = { [all …]
|
/linux-6.12.1/arch/mips/boot/dts/qca/ |
D | ar9331.dtsi | 12 #size-cells = <0>; 14 cpu@0 { 18 reg = <0>; 34 #clock-cells = <0>; 57 reg = <0x18000000 0x100>; 64 reg = <0x18020000 0x14>; 76 reg = <0x18040000 0x34>; 92 reg = <0x18050000 0x100>; 102 reg = <0x18060010 0x8>; 113 reg = <0x1806001c 0x4>; [all …]
|
/linux-6.12.1/arch/arm/mach-versatile/ |
D | integrator-hardware.h | 14 #define IO_BASE 0xF0000000 // VA of IO 15 #define IO_SIZE 0x0B000000 // How much? 19 #define IO_ADDRESS(x) (((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE) 25 #define INTEGRATOR_BOOT_ROM_LO 0x00000000 26 #define INTEGRATOR_BOOT_ROM_HI 0x20000000 40 #define INTEGRATOR_SSRAM_BASE 0x00000000 41 #define INTEGRATOR_SSRAM_ALIAS_BASE 0x10800000 44 #define INTEGRATOR_FLASH_BASE 0x24000000 47 #define INTEGRATOR_MBRD_SSRAM_BASE 0x28000000 53 #define INTEGRATOR_SDRAM_BASE 0x00040000 [all …]
|
/linux-6.12.1/arch/arm64/boot/dts/mediatek/ |
D | mt6779.dtsi | 26 #size-cells = <0>; 28 cpu0: cpu@0 { 32 reg = <0x000>; 39 reg = <0x100>; 46 reg = <0x200>; 53 reg = <0x300>; 60 reg = <0x400>; 67 reg = <0x500>; 74 reg = <0x600>; 81 reg = <0x700>; [all …]
|
/linux-6.12.1/arch/arm64/boot/dts/apm/ |
D | apm-storm.dtsi | 16 #size-cells = <0>; 18 cpu@0 { 21 reg = <0x0 0x000>; 23 cpu-release-addr = <0x1 0x0000fff8>; 29 reg = <0x0 0x001>; 31 cpu-release-addr = <0x1 0x0000fff8>; 37 reg = <0x0 0x100>; 39 cpu-release-addr = <0x1 0x0000fff8>; 45 reg = <0x0 0x101>; 47 cpu-release-addr = <0x1 0x0000fff8>; [all …]
|
/linux-6.12.1/arch/mips/sni/ |
D | rm200.c | 37 MEMPORT(0x160003f8, RM200_I8259A_IRQ_BASE + 4), 38 MEMPORT(0x160002f8, RM200_I8259A_IRQ_BASE + 3), 52 .start = 0x1cd41ffc, 53 .end = 0x1cd41fff, 66 .start = 0x18000000, 67 .end = 0x180fffff, 71 .start = 0x1b000000, 72 .end = 0x1b000004, 76 .start = 0x1ff00000, 77 .end = 0x1ff00020, [all …]
|
/linux-6.12.1/arch/arm/boot/dts/qcom/ |
D | qcom-msm8660.dtsi | 18 #size-cells = <0>; 20 cpu@0 { 24 reg = <0>; 45 reg = <0x0 0x0>; 56 #clock-cells = <0>; 63 #clock-cells = <0>; 70 #clock-cells = <0>; 86 reg = < 0x02080000 0x1000 >, 87 < 0x02081000 0x1000 >; 92 interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>, [all …]
|
/linux-6.12.1/arch/mips/boot/dts/ingenic/ |
D | jz4780.dtsi | 13 #size-cells = <0>; 15 cpu0: cpu@0 { 17 compatible = "ingenic,xburst-fpu1.0-mxu1.1"; 18 reg = <0>; 26 compatible = "ingenic,xburst-fpu1.0-mxu1.1"; 35 #address-cells = <0>; 43 reg = <0x10001000 0x50>; 54 #clock-cells = <0>; 59 #clock-cells = <0>; 65 reg = <0x10000000 0x100>; [all …]
|
/linux-6.12.1/arch/arm/boot/dts/mediatek/ |
D | mt7629.dtsi | 24 #size-cells = <0>; 27 cpu0: cpu@0 { 30 reg = <0x0>; 38 reg = <0x1>; 51 clk20m: oscillator-0 { 53 #clock-cells = <0>; 60 #clock-cells = <0>; 83 reg = <0x10000000 0x1000>; 89 reg = <0x10002000 0x1000>; 97 reg = <0x10006000 0x1000>; [all …]
|
D | mt2701.dtsi | 25 #size-cells = <0>; 28 cpu@0 { 31 reg = <0x0>; 36 reg = <0x1>; 41 reg = <0x2>; 46 reg = <0x3>; 57 reg = <0 0x80002000 0 0x1000>; 64 #clock-cells = <0>; 70 #clock-cells = <0>; 73 clk26m: oscillator@0 { [all …]
|
/linux-6.12.1/arch/arm64/include/asm/ |
D | insn.h | 18 AARCH64_INSN_HINT_NOP = 0x0 << 5, 19 AARCH64_INSN_HINT_YIELD = 0x1 << 5, 20 AARCH64_INSN_HINT_WFE = 0x2 << 5, 21 AARCH64_INSN_HINT_WFI = 0x3 << 5, 22 AARCH64_INSN_HINT_SEV = 0x4 << 5, 23 AARCH64_INSN_HINT_SEVL = 0x5 << 5, 25 AARCH64_INSN_HINT_XPACLRI = 0x07 << 5, 26 AARCH64_INSN_HINT_PACIA_1716 = 0x08 << 5, 27 AARCH64_INSN_HINT_PACIB_1716 = 0x0A << 5, 28 AARCH64_INSN_HINT_AUTIA_1716 = 0x0C << 5, [all …]
|
/linux-6.12.1/drivers/net/usb/ |
D | lan78xx.h | 9 #define USB_VENDOR_REQUEST_WRITE_REGISTER 0xA0 10 #define USB_VENDOR_REQUEST_READ_REGISTER 0xA1 11 #define USB_VENDOR_REQUEST_GET_STATS 0xA2 32 #define TX_CMD_A_IGE_ (0x20000000) 33 #define TX_CMD_A_ICE_ (0x10000000) 34 #define TX_CMD_A_LSO_ (0x08000000) 35 #define TX_CMD_A_IPE_ (0x04000000) 36 #define TX_CMD_A_TPE_ (0x02000000) 37 #define TX_CMD_A_IVTG_ (0x01000000) 38 #define TX_CMD_A_RVTG_ (0x00800000) [all …]
|
/linux-6.12.1/arch/mips/boot/dts/img/ |
D | pistachio.dtsi | 23 #size-cells = <0>; 25 cpu0: cpu@0 { 28 reg = <0>; 46 reg = <0x18100000 0x200>; 56 pinctrl-0 = <&i2c0_pins>; 59 #size-cells = <0>; 64 reg = <0x18100200 0x200>; 74 pinctrl-0 = <&i2c1_pins>; 77 #size-cells = <0>; 82 reg = <0x18100400 0x200>; [all …]
|
/linux-6.12.1/arch/hexagon/kernel/ |
D | vm_init_segtable.S | 16 * Start with mapping PA=0 to both VA=0x0 and VA=0xc000000 as 16MB large pages. 46 /* VA 0x00000000 */ 59 /* VA 0x40000000 */ 68 /* VA 0x80000000 */ 74 /*0xa8*/.word X,X,X,X 77 /*0xa9*/.word BKPG_IO(0xa9000000),BKPG_IO(0xa9000000),BKPG_IO(0xa9000000),BKPG_IO(0xa9000000) 79 /*0xa9*/.word X,X,X,X 81 /*0xaa*/.word X,X,X,X 82 /*0xab*/.word X,X,X,X 83 /*0xac*/.word X,X,X,X [all …]
|