| /linux-6.12.1/drivers/media/pci/cx18/ |
| D | cx18-av-audio.c | 60 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 in set_audclk_freq()
61 * AUX_PLL Integer = 0x0d, AUX PLL Post Divider = 0x20 in set_audclk_freq()
63 cx18_av_write4(cx, 0x108, 0x200d040f); in set_audclk_freq()
65 /* VID_PLL Fraction = 0x2be2fe */ in set_audclk_freq()
66 /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/ in set_audclk_freq()
67 cx18_av_write4(cx, 0x10c, 0x002be2fe); in set_audclk_freq()
69 /* AUX_PLL Fraction = 0x176740c */ in set_audclk_freq()
70 /* xtal * 0xd.bb3a060/0x20 = 32000 * 384: 393 MHz p-pd*/ in set_audclk_freq()
71 cx18_av_write4(cx, 0x110, 0x0176740c); in set_audclk_freq()
74 /* 0x1.f77f = (4 * xtal/8*2/455) / 32000 */ in set_audclk_freq()
[all …]
|
| /linux-6.12.1/drivers/media/i2c/cx25840/ |
| D | cx25840-audio.c | 39 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 in cx25840_set_audclk_freq()
40 * AUX_PLL Integer = 0x06, AUX PLL Post Divider = 0x10 in cx25840_set_audclk_freq()
42 cx25840_write4(client, 0x108, 0x1006040f); in cx25840_set_audclk_freq()
45 * VID_PLL Fraction (register 0x10c) = 0x2be2fe in cx25840_set_audclk_freq()
46 * 28636360 * 0xf.15f17f0/4 = 108 MHz in cx25840_set_audclk_freq()
51 * AUX_PLL Fraction = 0x1bb39ee in cx25840_set_audclk_freq()
52 * 28636363 * 0x6.dd9cf70/0x10 = 32000 * 384 in cx25840_set_audclk_freq()
57 cx25840_write4(client, 0x110, 0x01bb39ee); in cx25840_set_audclk_freq()
61 * SA_MCLK_DIV = 0x10 = 384/384 * AUX_PLL post dvivider in cx25840_set_audclk_freq()
63 cx25840_write(client, 0x127, 0x50); in cx25840_set_audclk_freq()
[all …]
|
| /linux-6.12.1/drivers/media/pci/bt8xx/ |
| D | bt878.h | 22 #define BT878_VERSION_CODE 0x000000
24 #define BT878_AINT_STAT 0x100
25 #define BT878_ARISCS (0xf<<28)
38 #define BT878_AINT_MASK 0x104
40 #define BT878_AGPIO_DMA_CTL 0x10c
41 #define BT878_A_GAIN (0xf<<28)
48 #define BT878_DA_LRD (0x1f<<16)
53 #define BT878_DA_SDR (0xf<<8)
61 #define BT878_APACK_LEN 0x110
62 #define BT878_AFP_LEN (0xff<<16)
[all …]
|
| /linux-6.12.1/drivers/phy/qualcomm/ |
| D | phy-qcom-qmp-qserdes-txrx.h | 10 #define QSERDES_TX_BIST_MODE_LANENO 0x000
11 #define QSERDES_TX_BIST_INVERT 0x004
12 #define QSERDES_TX_CLKBUF_ENABLE 0x008
13 #define QSERDES_TX_CMN_CONTROL_ONE 0x00c
14 #define QSERDES_TX_CMN_CONTROL_TWO 0x010
15 #define QSERDES_TX_CMN_CONTROL_THREE 0x014
16 #define QSERDES_TX_TX_EMP_POST1_LVL 0x018
17 #define QSERDES_TX_TX_POST2_EMPH 0x01c
18 #define QSERDES_TX_TX_BOOST_LVL_UP_DN 0x020
19 #define QSERDES_TX_HP_PD_ENABLES 0x024
[all …]
|
| D | phy-qcom-qmp-qserdes-txrx-v4.h | 10 #define QSERDES_V4_TX_BIST_MODE_LANENO 0x000
11 #define QSERDES_V4_TX_BIST_INVERT 0x004
12 #define QSERDES_V4_TX_CLKBUF_ENABLE 0x008
13 #define QSERDES_V4_TX_TX_EMP_POST1_LVL 0x00c
14 #define QSERDES_V4_TX_TX_IDLE_LVL_LARGE_AMP 0x010
15 #define QSERDES_V4_TX_TX_DRV_LVL 0x014
16 #define QSERDES_V4_TX_TX_DRV_LVL_OFFSET 0x018
17 #define QSERDES_V4_TX_RESET_TSYNC_EN 0x01c
18 #define QSERDES_V4_TX_PRE_STALL_LDO_BOOST_EN 0x020
19 #define QSERDES_V4_TX_TX_BAND 0x024
[all …]
|
| D | phy-qcom-qmp-qserdes-txrx-v5.h | 11 #define QSERDES_V5_TX_BIST_MODE_LANENO 0x000
12 #define QSERDES_V5_TX_BIST_INVERT 0x004
13 #define QSERDES_V5_TX_CLKBUF_ENABLE 0x008
14 #define QSERDES_V5_TX_TX_EMP_POST1_LVL 0x00c
15 #define QSERDES_V5_TX_TX_IDLE_LVL_LARGE_AMP 0x010
16 #define QSERDES_V5_TX_TX_DRV_LVL 0x014
17 #define QSERDES_V5_TX_TX_DRV_LVL_OFFSET 0x018
18 #define QSERDES_V5_TX_RESET_TSYNC_EN 0x01c
19 #define QSERDES_V5_TX_PRE_STALL_LDO_BOOST_EN 0x020
20 #define QSERDES_V5_TX_TX_BAND 0x024
[all …]
|
| D | phy-qcom-qmp-qserdes-ln-shrd-v6.h | 9 #define QSERDES_V6_LN_SHRD_RXCLK_DIV2_CTRL 0xa0
10 #define QSERDES_V6_LN_SHRD_RX_Q_EN_RATES 0xb0
11 #define QSERDES_V6_LN_SHRD_DFE_DAC_ENABLE1 0xb4
12 #define QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH1 0xc4
13 #define QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH2 0xc8
14 #define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B0 0xd4
15 #define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B1 0xd8
16 #define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B2 0xdc
17 #define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B3 0xe0
18 #define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B4 0xe4
[all …]
|
| D | phy-qcom-qmp-qserdes-txrx-v6_20.h | 9 #define QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_TX 0x30
10 #define QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_RX 0x34
11 #define QSERDES_V6_20_TX_TRAN_DRVR_EMP_EN 0xac
12 #define QSERDES_V6_20_TX_LANE_MODE_1 0x78
13 #define QSERDES_V6_20_TX_LANE_MODE_2 0x7c
14 #define QSERDES_V6_20_TX_LANE_MODE_3 0x80
16 #define QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_2 0x08
17 #define QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_3 0x0c
18 #define QSERDES_V6_20_RX_UCDR_SO_GAIN_RATE_2 0x18
19 #define QSERDES_V6_20_RX_UCDR_PI_CONTROLS 0x20
[all …]
|
| D | phy-qcom-qmp-qserdes-txrx-v6_n4.h | 9 #define QSERDES_V6_N4_TX_CLKBUF_ENABLE 0x08
10 #define QSERDES_V6_N4_TX_TX_EMP_POST1_LVL 0x0c
11 #define QSERDES_V6_N4_TX_TX_DRV_LVL 0x14
12 #define QSERDES_V6_N4_TX_RESET_TSYNC_EN 0x1c
13 #define QSERDES_V6_N4_TX_PRE_STALL_LDO_BOOST_EN 0x20
14 #define QSERDES_V6_N4_TX_RES_CODE_LANE_OFFSET_TX 0x30
15 #define QSERDES_V6_N4_TX_RES_CODE_LANE_OFFSET_RX 0x34
16 #define QSERDES_V6_N4_TX_TRANSCEIVER_BIAS_EN 0x48
17 #define QSERDES_V6_N4_TX_HIGHZ_DRVR_EN 0x4c
18 #define QSERDES_V6_N4_TX_TX_POL_INV 0x50
[all …]
|
| D | phy-qcom-qmp-qserdes-txrx-v3.h | 10 #define QSERDES_V3_TX_BIST_MODE_LANENO 0x000
11 #define QSERDES_V3_TX_CLKBUF_ENABLE 0x008
12 #define QSERDES_V3_TX_TX_EMP_POST1_LVL 0x00c
13 #define QSERDES_V3_TX_TX_DRV_LVL 0x01c
14 #define QSERDES_V3_TX_RESET_TSYNC_EN 0x024
15 #define QSERDES_V3_TX_PRE_STALL_LDO_BOOST_EN 0x028
16 #define QSERDES_V3_TX_TX_BAND 0x02c
17 #define QSERDES_V3_TX_SLEW_CNTL 0x030
18 #define QSERDES_V3_TX_INTERFACE_SELECT 0x034
19 #define QSERDES_V3_TX_RES_CODE_LANE_TX 0x03c
[all …]
|
| D | phy-qcom-qmp-qserdes-pll.h | 10 #define QSERDES_PLL_BG_TIMER 0x00c
11 #define QSERDES_PLL_SSC_EN_CENTER 0x010
12 #define QSERDES_PLL_SSC_ADJ_PER1 0x014
13 #define QSERDES_PLL_SSC_ADJ_PER2 0x018
14 #define QSERDES_PLL_SSC_PER1 0x01c
15 #define QSERDES_PLL_SSC_PER2 0x020
16 #define QSERDES_PLL_SSC_STEP_SIZE1_MODE0 0x024
17 #define QSERDES_PLL_SSC_STEP_SIZE2_MODE0 0x028
18 #define QSERDES_PLL_SSC_STEP_SIZE1_MODE1 0x02c
19 #define QSERDES_PLL_SSC_STEP_SIZE2_MODE1 0x030
[all …]
|
| /linux-6.12.1/arch/arm/mach-orion5x/ |
| D | bridge-regs.h | 9 #define CPU_CONF (ORION5X_BRIDGE_VIRT_BASE + 0x100)
11 #define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE + 0x104)
13 #define RSTOUTn_MASK (ORION5X_BRIDGE_VIRT_BASE + 0x108)
14 #define RSTOUTn_MASK_PHYS (ORION5X_BRIDGE_PHYS_BASE + 0x108)
16 #define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE + 0x10c)
18 #define BRIDGE_CAUSE (ORION5X_BRIDGE_VIRT_BASE + 0x110)
20 #define POWER_MNG_CTRL_REG (ORION5X_BRIDGE_VIRT_BASE + 0x11C)
22 #define BRIDGE_INT_TIMER1_CLR (~0x0004)
24 #define MAIN_IRQ_CAUSE (ORION5X_BRIDGE_VIRT_BASE + 0x200)
26 #define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE + 0x204)
[all …]
|
| /linux-6.12.1/arch/arm/mach-s3c/ |
| D | regs-clock-s3c64xx.h | 20 #define S3C_PCLK_GATE S3C_CLKREG(0x34)
21 #define S3C6410_CLK_SRC2 S3C_CLKREG(0x10C)
22 #define S3C_MEM_SYS_CFG S3C_CLKREG(0x120)
31 #define MEM_SYS_CFG_INDEP_CF 0x4000
32 #define MEM_SYS_CFG_EBI_FIX_PRI_CFCON 0x30
|
| /linux-6.12.1/tools/perf/pmu-events/arch/arm64/ampere/emag/ |
| D | pipeline.json | 4 "EventCode": "0x108",
10 "EventCode": "0x109",
16 "EventCode": "0x10a",
22 "EventCode": "0x10b",
28 "EventCode": "0x10c",
34 "EventCode": "0x10d",
40 "EventCode": "0x10e",
46 "EventCode": "0x10f",
|
| /linux-6.12.1/drivers/clk/meson/ |
| D | s4-pll.h | 10 #define ANACTRL_FIXPLL_CTRL0 0x040
11 #define ANACTRL_FIXPLL_CTRL1 0x044
12 #define ANACTRL_FIXPLL_CTRL3 0x04c
13 #define ANACTRL_GP0PLL_CTRL0 0x080
14 #define ANACTRL_GP0PLL_CTRL1 0x084
15 #define ANACTRL_GP0PLL_CTRL2 0x088
16 #define ANACTRL_GP0PLL_CTRL3 0x08c
17 #define ANACTRL_GP0PLL_CTRL4 0x090
18 #define ANACTRL_GP0PLL_CTRL5 0x094
19 #define ANACTRL_GP0PLL_CTRL6 0x098
[all …]
|
| /linux-6.12.1/arch/arm/boot/dts/ti/omap/ |
| D | omap4-mcpdm.dtsi | 12 /* 0x4a100106 abe_pdm_ul_data.abe_pdm_ul_data ag25 */
13 OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)
15 /* 0x4a100108 abe_pdm_dl_data.abe_pdm_dl_data af25 */
16 OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0)
18 /* 0x4a10010a abe_pdm_frame.abe_pdm_frame ae25 */
19 OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0)
21 /* 0x4a10010c abe_pdm_lb_clk.abe_pdm_lb_clk af26 */
22 OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0)
24 /* 0x4a10010e abe_clks.abe_clks ah26 */
25 OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0)
[all …]
|
| /linux-6.12.1/Documentation/devicetree/bindings/soc/tegra/ |
| D | nvidia,tegra20-ahb.yaml | 39 reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */
|
| /linux-6.12.1/include/linux/ |
| D | atmel_pdc.h | 15 #define ATMEL_PDC_RPR 0x100 /* Receive Pointer Register */
16 #define ATMEL_PDC_RCR 0x104 /* Receive Counter Register */
17 #define ATMEL_PDC_TPR 0x108 /* Transmit Pointer Register */
18 #define ATMEL_PDC_TCR 0x10c /* Transmit Counter Register */
19 #define ATMEL_PDC_RNPR 0x110 /* Receive Next Pointer Register */
20 #define ATMEL_PDC_RNCR 0x114 /* Receive Next Counter Register */
21 #define ATMEL_PDC_TNPR 0x118 /* Transmit Next Pointer Register */
22 #define ATMEL_PDC_TNCR 0x11c /* Transmit Next Counter Register */
24 #define ATMEL_PDC_PTCR 0x120 /* Transfer Control Register */
25 #define ATMEL_PDC_RXTEN (1 << 0) /* Receiver Transfer Enable */
[all …]
|
| /linux-6.12.1/drivers/video/fbdev/ |
| D | wm8505fb_regs.h | 15 * Color space select register, default value 0x1c
22 #define WMT_GOVR_COLORSPACE 0x1e4
28 #define WMT_GOVR_COLORSPACE1 0x30
30 #define WMT_GOVR_CONTRAST 0x1b8
31 #define WMT_GOVR_BRGHTNESS 0x1bc /* incompatible with RGB? */
34 #define WMT_GOVR_FBADDR 0x90
35 #define WMT_GOVR_FBADDR1 0x94 /* UV offset in YUV mode */
38 #define WMT_GOVR_XPAN 0xa4
39 #define WMT_GOVR_YPAN 0xa0
41 #define WMT_GOVR_XRES 0x98
[all …]
|
| /linux-6.12.1/arch/arm64/boot/dts/freescale/ |
| D | imx8mn-pinfunc.h | 14 …ne MX8MN_IOMUXC_BOOT_MODE2_CCMSRCGPCMIX_BOOT_MODE2 0x020 0x25C 0x000 0x0 0x0
15 …ne MX8MN_IOMUXC_BOOT_MODE2_I2C1_SCL 0x020 0x25C 0x55C 0x1 0x3
16 …ne MX8MN_IOMUXC_BOOT_MODE3_CCMSRCGPCMIX_BOOT_MODE3 0x024 0x260 0x000 0x0 0x0
17 …ne MX8MN_IOMUXC_BOOT_MODE3_I2C1_SDA 0x024 0x260 0x56C 0x1 0x3
18 …ne MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x028 0x290 0x000 0x0 0x0
19 …ne MX8MN_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT 0x028 0x290 0x000 0x1 0x0
20 …ne MX8MN_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x028 0x290 0x000 0x5 0x0
21 …ne MX8MN_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_EXT_CLK1 0x028 0x290 0x000 0x6 0x0
22 …ne MX8MN_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x02C 0x294 0x000 0x0 0x0
23 …ne MX8MN_IOMUXC_GPIO1_IO01_PWM1_OUT 0x02C 0x294 0x000 0x1 0x0
[all …]
|
| /linux-6.12.1/arch/arm/boot/dts/nxp/vf/ |
| D | vf610-pinfunc.h | 14 #define ALT0 0x0
15 #define ALT1 0x1
16 #define ALT2 0x2
17 #define ALT3 0x3
18 #define ALT4 0x4
19 #define ALT5 0x5
20 #define ALT6 0x6
21 #define ALT7 0x7
24 #define VF610_PAD_PTA6__GPIO_0 0x000 0x000 ALT0 0x0
25 #define VF610_PAD_PTA6__RMII_CLKOUT 0x000 0x000 ALT1 0x0
[all …]
|
| /linux-6.12.1/drivers/media/rc/keymaps/ |
| D | rc-x96max.c | 13 { 0x140, KEY_POWER },
22 { 0x118, KEY_VOLUMEUP },
23 { 0x110, KEY_VOLUMEDOWN },
25 { 0x143, KEY_MUTE }, // config
27 { 0x100, KEY_EPG }, // mouse
28 { 0x119, KEY_BACK },
30 { 0x116, KEY_UP },
31 { 0x151, KEY_LEFT },
32 { 0x150, KEY_RIGHT },
33 { 0x11a, KEY_DOWN },
[all …]
|
| /linux-6.12.1/drivers/net/wireless/intel/iwlwifi/ |
| D | iwl-scd.h | 33 iwl_set_bits_prph(trans, SCD_AGGR_SEL, 0); in iwl_scd_disable_agg()
38 iwl_write_prph(trans, SCD_TXFACT, IWL_MASK(0, 7)); in iwl_scd_activate_fifos()
43 iwl_write_prph(trans, SCD_TXFACT, 0); in iwl_scd_deactivate_fifos()
55 return SCD_BASE + 0x18 + chnl * 4; in SCD_QUEUE_WRPTR()
57 return SCD_BASE + 0x284 + (chnl - 20) * 4; in SCD_QUEUE_WRPTR()
63 return SCD_BASE + 0x68 + chnl * 4; in SCD_QUEUE_RDPTR()
65 return SCD_BASE + 0x2B4 + chnl * 4; in SCD_QUEUE_RDPTR()
71 return SCD_BASE + 0x10c + chnl * 4; in SCD_QUEUE_STATUS_BITS()
73 return SCD_BASE + 0x334 + chnl * 4; in SCD_QUEUE_STATUS_BITS()
80 (0 << SCD_QUEUE_STTS_REG_POS_ACTIVE)| in iwl_scd_txq_set_inactive()
|
| /linux-6.12.1/drivers/media/platform/mediatek/jpeg/ |
| D | mtk_jpeg_enc_hw.h | 15 #define JPEG_ENC_INT_STATUS_DONE BIT(0)
16 #define JPEG_ENC_INT_STATUS_MASK_ALLIRQ 0x13
18 #define JPEG_ENC_DST_ADDR_OFFSET_MASK GENMASK(3, 0)
20 #define JPEG_ENC_CTRL_YUV_FORMAT_MASK 0x18
24 #define JPEG_ENC_CTRL_ENABLE_BIT BIT(0)
25 #define JPEG_ENC_RESET_BIT BIT(0)
27 #define JPEG_ENC_YUV_FORMAT_YUYV 0
32 #define JPEG_ENC_QUALITY_Q60 0x0
33 #define JPEG_ENC_QUALITY_Q80 0x1
34 #define JPEG_ENC_QUALITY_Q90 0x2
[all …]
|
| /linux-6.12.1/arch/arm/boot/dts/nxp/imx/ |
| D | imxrt1050-pinfunc.h | 10 #define IMX_PAD_SION 0x40000000
17 #define MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00 0x014 0x204 0x000 0x0 0x0
18 #define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXPWM4_PWM0_A 0x014 0x204 0x494 0x1 0x0
19 #define MXRT1050_IOMUXC_GPIO_EMC_00_LPSPI2_SCK 0x014 0x204 0x500 0x2 0x1
20 #define MXRT1050_IOMUXC_GPIO_EMC_00_XBAR_INOUT2 0x014 0x204 0x60C 0x3 0x0
21 #define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXIO1_D00 0x014 0x204 0x000 0x4 0x0
22 #define MXRT1050_IOMUXC_GPIO_EMC_00_GPIO4_IO00 0x014 0x204 0x000 0x5 0x0
24 #define MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01 0x018 0x208 0x000 0x0 0x0
25 #define MXRT1050_IOMUXC_GPIO_EMC_01_FLEXPWM4_PWM0_B 0x018 0x208 0x000 0x1 0x0
26 #define MXRT1050_IOMUXC_GPIO_EMC_01_LPSPI2_PCS0 0x018 0x208 0x4FC 0x2 0x1
[all …]
|