1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * driver for the i2c-tiny-usb adapter - 1.0
4 * http://www.harbaum.org/till/i2c_tiny_usb
5 *
6 * Copyright (C) 2006-2007 Till Harbaum (Till@Harbaum.org)
7 */
8
9 #include <linux/kernel.h>
10 #include <linux/errno.h>
11 #include <linux/module.h>
12 #include <linux/slab.h>
13 #include <linux/types.h>
14
15 /* include interfaces to usb layer */
16 #include <linux/usb.h>
17
18 /* include interface to i2c layer */
19 #include <linux/i2c.h>
20
21 /* commands via USB, must match command ids in the firmware */
22 #define CMD_ECHO 0
23 #define CMD_GET_FUNC 1
24 #define CMD_SET_DELAY 2
25 #define CMD_GET_STATUS 3
26
27 #define CMD_I2C_IO 4
28 #define CMD_I2C_IO_BEGIN (1<<0)
29 #define CMD_I2C_IO_END (1<<1)
30
31 /* i2c bit delay, default is 10us -> 100kHz max
32 (in practice, due to additional delays in the i2c bitbanging
33 code this results in a i2c clock of about 50kHz) */
34 static unsigned short delay = 10;
35 module_param(delay, ushort, 0);
36 MODULE_PARM_DESC(delay, "bit delay in microseconds "
37 "(default is 10us for 100kHz max)");
38
39 static int usb_read(struct i2c_adapter *adapter, int cmd,
40 int value, int index, void *data, int len);
41
42 static int usb_write(struct i2c_adapter *adapter, int cmd,
43 int value, int index, void *data, int len);
44
45 /* ----- begin of i2c layer ---------------------------------------------- */
46
47 #define STATUS_IDLE 0
48 #define STATUS_ADDRESS_ACK 1
49 #define STATUS_ADDRESS_NAK 2
50
usb_xfer(struct i2c_adapter * adapter,struct i2c_msg * msgs,int num)51 static int usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num)
52 {
53 unsigned char *pstatus;
54 struct i2c_msg *pmsg;
55 int i, ret;
56
57 pstatus = kmalloc(sizeof(*pstatus), GFP_KERNEL);
58 if (!pstatus)
59 return -ENOMEM;
60
61 for (i = 0 ; i < num ; i++) {
62 int cmd = CMD_I2C_IO;
63
64 if (i == 0)
65 cmd |= CMD_I2C_IO_BEGIN;
66
67 if (i == num-1)
68 cmd |= CMD_I2C_IO_END;
69
70 pmsg = &msgs[i];
71
72 dev_dbg(&adapter->dev,
73 " %d: %s (flags %d) %d bytes to 0x%02x\n",
74 i, pmsg->flags & I2C_M_RD ? "read" : "write",
75 pmsg->flags, pmsg->len, pmsg->addr);
76
77 /* and directly send the message */
78 if (pmsg->flags & I2C_M_RD) {
79 /* read data */
80 if (usb_read(adapter, cmd,
81 pmsg->flags, pmsg->addr,
82 pmsg->buf, pmsg->len) != pmsg->len) {
83 dev_err(&adapter->dev,
84 "failure reading data\n");
85 ret = -EIO;
86 goto out;
87 }
88 } else {
89 /* write data */
90 if (usb_write(adapter, cmd,
91 pmsg->flags, pmsg->addr,
92 pmsg->buf, pmsg->len) != pmsg->len) {
93 dev_err(&adapter->dev,
94 "failure writing data\n");
95 ret = -EIO;
96 goto out;
97 }
98 }
99
100 /* read status */
101 if (usb_read(adapter, CMD_GET_STATUS, 0, 0, pstatus, 1) != 1) {
102 dev_err(&adapter->dev, "failure reading status\n");
103 ret = -EIO;
104 goto out;
105 }
106
107 dev_dbg(&adapter->dev, " status = %d\n", *pstatus);
108 if (*pstatus == STATUS_ADDRESS_NAK) {
109 ret = -ENXIO;
110 goto out;
111 }
112 }
113
114 ret = i;
115 out:
116 kfree(pstatus);
117 return ret;
118 }
119
usb_func(struct i2c_adapter * adapter)120 static u32 usb_func(struct i2c_adapter *adapter)
121 {
122 __le32 *pfunc;
123 u32 ret;
124
125 pfunc = kmalloc(sizeof(*pfunc), GFP_KERNEL);
126
127 /* get functionality from adapter */
128 if (!pfunc || usb_read(adapter, CMD_GET_FUNC, 0, 0, pfunc,
129 sizeof(*pfunc)) != sizeof(*pfunc)) {
130 dev_err(&adapter->dev, "failure reading functionality\n");
131 ret = 0;
132 goto out;
133 }
134
135 ret = le32_to_cpup(pfunc);
136 out:
137 kfree(pfunc);
138 return ret;
139 }
140
141 /* This is the actual algorithm we define */
142 static const struct i2c_algorithm usb_algorithm = {
143 .xfer = usb_xfer,
144 .functionality = usb_func,
145 };
146
147 /* ----- end of i2c layer ------------------------------------------------ */
148
149 /* ----- begin of usb layer ---------------------------------------------- */
150
151 /*
152 * Initially the usb i2c interface uses a vid/pid pair donated by
153 * Future Technology Devices International Ltd., later a pair was
154 * bought from EZPrototypes
155 */
156 static const struct usb_device_id i2c_tiny_usb_table[] = {
157 { USB_DEVICE(0x0403, 0xc631) }, /* FTDI */
158 { USB_DEVICE(0x1c40, 0x0534) }, /* EZPrototypes */
159 { } /* Terminating entry */
160 };
161
162 MODULE_DEVICE_TABLE(usb, i2c_tiny_usb_table);
163
164 /* Structure to hold all of our device specific stuff */
165 struct i2c_tiny_usb {
166 struct usb_device *usb_dev; /* the usb device for this device */
167 struct usb_interface *interface; /* the interface for this device */
168 struct i2c_adapter adapter; /* i2c related things */
169 };
170
usb_read(struct i2c_adapter * adapter,int cmd,int value,int index,void * data,int len)171 static int usb_read(struct i2c_adapter *adapter, int cmd,
172 int value, int index, void *data, int len)
173 {
174 struct i2c_tiny_usb *dev = (struct i2c_tiny_usb *)adapter->algo_data;
175 void *dmadata = kmalloc(len, GFP_KERNEL);
176 int ret;
177
178 if (!dmadata)
179 return -ENOMEM;
180
181 /* do control transfer */
182 ret = usb_control_msg(dev->usb_dev, usb_rcvctrlpipe(dev->usb_dev, 0),
183 cmd, USB_TYPE_VENDOR | USB_RECIP_INTERFACE |
184 USB_DIR_IN, value, index, dmadata, len, 2000);
185
186 memcpy(data, dmadata, len);
187 kfree(dmadata);
188 return ret;
189 }
190
usb_write(struct i2c_adapter * adapter,int cmd,int value,int index,void * data,int len)191 static int usb_write(struct i2c_adapter *adapter, int cmd,
192 int value, int index, void *data, int len)
193 {
194 struct i2c_tiny_usb *dev = (struct i2c_tiny_usb *)adapter->algo_data;
195 void *dmadata = kmemdup(data, len, GFP_KERNEL);
196 int ret;
197
198 if (!dmadata)
199 return -ENOMEM;
200
201 /* do control transfer */
202 ret = usb_control_msg(dev->usb_dev, usb_sndctrlpipe(dev->usb_dev, 0),
203 cmd, USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
204 value, index, dmadata, len, 2000);
205
206 kfree(dmadata);
207 return ret;
208 }
209
i2c_tiny_usb_free(struct i2c_tiny_usb * dev)210 static void i2c_tiny_usb_free(struct i2c_tiny_usb *dev)
211 {
212 usb_put_dev(dev->usb_dev);
213 kfree(dev);
214 }
215
i2c_tiny_usb_probe(struct usb_interface * interface,const struct usb_device_id * id)216 static int i2c_tiny_usb_probe(struct usb_interface *interface,
217 const struct usb_device_id *id)
218 {
219 struct i2c_tiny_usb *dev;
220 int retval = -ENOMEM;
221 u16 version;
222
223 if (interface->intf_assoc &&
224 interface->intf_assoc->bFunctionClass != USB_CLASS_VENDOR_SPEC)
225 return -ENODEV;
226
227 dev_dbg(&interface->dev, "probing usb device\n");
228
229 /* allocate memory for our device state and initialize it */
230 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
231 if (!dev)
232 goto error;
233
234 dev->usb_dev = usb_get_dev(interface_to_usbdev(interface));
235 dev->interface = interface;
236
237 /* save our data pointer in this interface device */
238 usb_set_intfdata(interface, dev);
239
240 version = le16_to_cpu(dev->usb_dev->descriptor.bcdDevice);
241 dev_info(&interface->dev,
242 "version %x.%02x found at bus %03d address %03d\n",
243 version >> 8, version & 0xff,
244 dev->usb_dev->bus->busnum, dev->usb_dev->devnum);
245
246 /* setup i2c adapter description */
247 dev->adapter.owner = THIS_MODULE;
248 dev->adapter.class = I2C_CLASS_HWMON;
249 dev->adapter.algo = &usb_algorithm;
250 dev->adapter.algo_data = dev;
251 snprintf(dev->adapter.name, sizeof(dev->adapter.name),
252 "i2c-tiny-usb at bus %03d device %03d",
253 dev->usb_dev->bus->busnum, dev->usb_dev->devnum);
254
255 if (usb_write(&dev->adapter, CMD_SET_DELAY, delay, 0, NULL, 0) != 0) {
256 dev_err(&dev->adapter.dev,
257 "failure setting delay to %dus\n", delay);
258 retval = -EIO;
259 goto error;
260 }
261
262 dev->adapter.dev.parent = &dev->interface->dev;
263
264 /* and finally attach to i2c layer */
265 i2c_add_adapter(&dev->adapter);
266
267 /* inform user about successful attachment to i2c layer */
268 dev_info(&dev->adapter.dev, "connected i2c-tiny-usb device\n");
269
270 return 0;
271
272 error:
273 if (dev)
274 i2c_tiny_usb_free(dev);
275
276 return retval;
277 }
278
i2c_tiny_usb_disconnect(struct usb_interface * interface)279 static void i2c_tiny_usb_disconnect(struct usb_interface *interface)
280 {
281 struct i2c_tiny_usb *dev = usb_get_intfdata(interface);
282
283 i2c_del_adapter(&dev->adapter);
284 usb_set_intfdata(interface, NULL);
285 i2c_tiny_usb_free(dev);
286
287 dev_dbg(&interface->dev, "disconnected\n");
288 }
289
290 static struct usb_driver i2c_tiny_usb_driver = {
291 .name = "i2c-tiny-usb",
292 .probe = i2c_tiny_usb_probe,
293 .disconnect = i2c_tiny_usb_disconnect,
294 .id_table = i2c_tiny_usb_table,
295 };
296
297 module_usb_driver(i2c_tiny_usb_driver);
298
299 /* ----- end of usb layer ------------------------------------------------ */
300
301 MODULE_AUTHOR("Till Harbaum <Till@Harbaum.org>");
302 MODULE_DESCRIPTION("i2c-tiny-usb driver v1.0");
303 MODULE_LICENSE("GPL");
304