1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright(c) 1999 - 2018 Intel Corporation. */
3
4 #include "ixgbe_x540.h"
5 #include "ixgbe_type.h"
6 #include "ixgbe_common.h"
7 #include "ixgbe_phy.h"
8
9 static int ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *, ixgbe_link_speed);
10 static int ixgbe_setup_fc_x550em(struct ixgbe_hw *);
11 static void ixgbe_fc_autoneg_fiber_x550em_a(struct ixgbe_hw *);
12 static void ixgbe_fc_autoneg_backplane_x550em_a(struct ixgbe_hw *);
13 static int ixgbe_setup_fc_backplane_x550em_a(struct ixgbe_hw *);
14
ixgbe_get_invariants_X550_x(struct ixgbe_hw * hw)15 static int ixgbe_get_invariants_X550_x(struct ixgbe_hw *hw)
16 {
17 struct ixgbe_mac_info *mac = &hw->mac;
18 struct ixgbe_phy_info *phy = &hw->phy;
19 struct ixgbe_link_info *link = &hw->link;
20
21 /* Start with X540 invariants, since so simular */
22 ixgbe_get_invariants_X540(hw);
23
24 if (mac->ops.get_media_type(hw) != ixgbe_media_type_copper)
25 phy->ops.set_phy_power = NULL;
26
27 link->addr = IXGBE_CS4227;
28
29 return 0;
30 }
31
ixgbe_get_invariants_X550_x_fw(struct ixgbe_hw * hw)32 static int ixgbe_get_invariants_X550_x_fw(struct ixgbe_hw *hw)
33 {
34 struct ixgbe_phy_info *phy = &hw->phy;
35
36 /* Start with X540 invariants, since so similar */
37 ixgbe_get_invariants_X540(hw);
38
39 phy->ops.set_phy_power = NULL;
40
41 return 0;
42 }
43
ixgbe_get_invariants_X550_a(struct ixgbe_hw * hw)44 static int ixgbe_get_invariants_X550_a(struct ixgbe_hw *hw)
45 {
46 struct ixgbe_mac_info *mac = &hw->mac;
47 struct ixgbe_phy_info *phy = &hw->phy;
48
49 /* Start with X540 invariants, since so simular */
50 ixgbe_get_invariants_X540(hw);
51
52 if (mac->ops.get_media_type(hw) != ixgbe_media_type_copper)
53 phy->ops.set_phy_power = NULL;
54
55 return 0;
56 }
57
ixgbe_get_invariants_X550_a_fw(struct ixgbe_hw * hw)58 static int ixgbe_get_invariants_X550_a_fw(struct ixgbe_hw *hw)
59 {
60 struct ixgbe_phy_info *phy = &hw->phy;
61
62 /* Start with X540 invariants, since so similar */
63 ixgbe_get_invariants_X540(hw);
64
65 phy->ops.set_phy_power = NULL;
66
67 return 0;
68 }
69
70 /** ixgbe_setup_mux_ctl - Setup ESDP register for I2C mux control
71 * @hw: pointer to hardware structure
72 **/
ixgbe_setup_mux_ctl(struct ixgbe_hw * hw)73 static void ixgbe_setup_mux_ctl(struct ixgbe_hw *hw)
74 {
75 u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
76
77 if (hw->bus.lan_id) {
78 esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1);
79 esdp |= IXGBE_ESDP_SDP1_DIR;
80 }
81 esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR);
82 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
83 IXGBE_WRITE_FLUSH(hw);
84 }
85
86 /**
87 * ixgbe_read_cs4227 - Read CS4227 register
88 * @hw: pointer to hardware structure
89 * @reg: register number to write
90 * @value: pointer to receive value read
91 *
92 * Returns status code
93 */
ixgbe_read_cs4227(struct ixgbe_hw * hw,u16 reg,u16 * value)94 static int ixgbe_read_cs4227(struct ixgbe_hw *hw, u16 reg, u16 *value)
95 {
96 return hw->link.ops.read_link_unlocked(hw, hw->link.addr, reg, value);
97 }
98
99 /**
100 * ixgbe_write_cs4227 - Write CS4227 register
101 * @hw: pointer to hardware structure
102 * @reg: register number to write
103 * @value: value to write to register
104 *
105 * Returns status code
106 */
ixgbe_write_cs4227(struct ixgbe_hw * hw,u16 reg,u16 value)107 static int ixgbe_write_cs4227(struct ixgbe_hw *hw, u16 reg, u16 value)
108 {
109 return hw->link.ops.write_link_unlocked(hw, hw->link.addr, reg, value);
110 }
111
112 /**
113 * ixgbe_read_pe - Read register from port expander
114 * @hw: pointer to hardware structure
115 * @reg: register number to read
116 * @value: pointer to receive read value
117 *
118 * Returns status code
119 */
ixgbe_read_pe(struct ixgbe_hw * hw,u8 reg,u8 * value)120 static int ixgbe_read_pe(struct ixgbe_hw *hw, u8 reg, u8 *value)
121 {
122 int status;
123
124 status = ixgbe_read_i2c_byte_generic_unlocked(hw, reg, IXGBE_PE, value);
125 if (status)
126 hw_err(hw, "port expander access failed with %d\n", status);
127 return status;
128 }
129
130 /**
131 * ixgbe_write_pe - Write register to port expander
132 * @hw: pointer to hardware structure
133 * @reg: register number to write
134 * @value: value to write
135 *
136 * Returns status code
137 */
ixgbe_write_pe(struct ixgbe_hw * hw,u8 reg,u8 value)138 static int ixgbe_write_pe(struct ixgbe_hw *hw, u8 reg, u8 value)
139 {
140 int status;
141
142 status = ixgbe_write_i2c_byte_generic_unlocked(hw, reg, IXGBE_PE,
143 value);
144 if (status)
145 hw_err(hw, "port expander access failed with %d\n", status);
146 return status;
147 }
148
149 /**
150 * ixgbe_reset_cs4227 - Reset CS4227 using port expander
151 * @hw: pointer to hardware structure
152 *
153 * This function assumes that the caller has acquired the proper semaphore.
154 * Returns error code
155 */
ixgbe_reset_cs4227(struct ixgbe_hw * hw)156 static int ixgbe_reset_cs4227(struct ixgbe_hw *hw)
157 {
158 int status;
159 u32 retry;
160 u16 value;
161 u8 reg;
162
163 /* Trigger hard reset. */
164 status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®);
165 if (status)
166 return status;
167 reg |= IXGBE_PE_BIT1;
168 status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg);
169 if (status)
170 return status;
171
172 status = ixgbe_read_pe(hw, IXGBE_PE_CONFIG, ®);
173 if (status)
174 return status;
175 reg &= ~IXGBE_PE_BIT1;
176 status = ixgbe_write_pe(hw, IXGBE_PE_CONFIG, reg);
177 if (status)
178 return status;
179
180 status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®);
181 if (status)
182 return status;
183 reg &= ~IXGBE_PE_BIT1;
184 status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg);
185 if (status)
186 return status;
187
188 usleep_range(IXGBE_CS4227_RESET_HOLD, IXGBE_CS4227_RESET_HOLD + 100);
189
190 status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®);
191 if (status)
192 return status;
193 reg |= IXGBE_PE_BIT1;
194 status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg);
195 if (status)
196 return status;
197
198 /* Wait for the reset to complete. */
199 msleep(IXGBE_CS4227_RESET_DELAY);
200 for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) {
201 status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EFUSE_STATUS,
202 &value);
203 if (!status && value == IXGBE_CS4227_EEPROM_LOAD_OK)
204 break;
205 msleep(IXGBE_CS4227_CHECK_DELAY);
206 }
207 if (retry == IXGBE_CS4227_RETRIES) {
208 hw_err(hw, "CS4227 reset did not complete\n");
209 return -EIO;
210 }
211
212 status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EEPROM_STATUS, &value);
213 if (status || !(value & IXGBE_CS4227_EEPROM_LOAD_OK)) {
214 hw_err(hw, "CS4227 EEPROM did not load successfully\n");
215 return -EIO;
216 }
217
218 return 0;
219 }
220
221 /**
222 * ixgbe_check_cs4227 - Check CS4227 and reset as needed
223 * @hw: pointer to hardware structure
224 */
ixgbe_check_cs4227(struct ixgbe_hw * hw)225 static void ixgbe_check_cs4227(struct ixgbe_hw *hw)
226 {
227 u32 swfw_mask = hw->phy.phy_semaphore_mask;
228 int status;
229 u16 value;
230 u8 retry;
231
232 for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) {
233 status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask);
234 if (status) {
235 hw_err(hw, "semaphore failed with %d\n", status);
236 msleep(IXGBE_CS4227_CHECK_DELAY);
237 continue;
238 }
239
240 /* Get status of reset flow. */
241 status = ixgbe_read_cs4227(hw, IXGBE_CS4227_SCRATCH, &value);
242 if (!status && value == IXGBE_CS4227_RESET_COMPLETE)
243 goto out;
244
245 if (status || value != IXGBE_CS4227_RESET_PENDING)
246 break;
247
248 /* Reset is pending. Wait and check again. */
249 hw->mac.ops.release_swfw_sync(hw, swfw_mask);
250 msleep(IXGBE_CS4227_CHECK_DELAY);
251 }
252 /* If still pending, assume other instance failed. */
253 if (retry == IXGBE_CS4227_RETRIES) {
254 status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask);
255 if (status) {
256 hw_err(hw, "semaphore failed with %d\n", status);
257 return;
258 }
259 }
260
261 /* Reset the CS4227. */
262 status = ixgbe_reset_cs4227(hw);
263 if (status) {
264 hw_err(hw, "CS4227 reset failed: %d", status);
265 goto out;
266 }
267
268 /* Reset takes so long, temporarily release semaphore in case the
269 * other driver instance is waiting for the reset indication.
270 */
271 ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH,
272 IXGBE_CS4227_RESET_PENDING);
273 hw->mac.ops.release_swfw_sync(hw, swfw_mask);
274 usleep_range(10000, 12000);
275 status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask);
276 if (status) {
277 hw_err(hw, "semaphore failed with %d", status);
278 return;
279 }
280
281 /* Record completion for next time. */
282 status = ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH,
283 IXGBE_CS4227_RESET_COMPLETE);
284
285 out:
286 hw->mac.ops.release_swfw_sync(hw, swfw_mask);
287 msleep(hw->eeprom.semaphore_delay);
288 }
289
290 /** ixgbe_identify_phy_x550em - Get PHY type based on device id
291 * @hw: pointer to hardware structure
292 *
293 * Returns error code
294 */
ixgbe_identify_phy_x550em(struct ixgbe_hw * hw)295 static int ixgbe_identify_phy_x550em(struct ixgbe_hw *hw)
296 {
297 switch (hw->device_id) {
298 case IXGBE_DEV_ID_X550EM_A_SFP:
299 if (hw->bus.lan_id)
300 hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM;
301 else
302 hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM;
303 return ixgbe_identify_module_generic(hw);
304 case IXGBE_DEV_ID_X550EM_X_SFP:
305 /* set up for CS4227 usage */
306 hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
307 ixgbe_setup_mux_ctl(hw);
308 ixgbe_check_cs4227(hw);
309 fallthrough;
310 case IXGBE_DEV_ID_X550EM_A_SFP_N:
311 return ixgbe_identify_module_generic(hw);
312 case IXGBE_DEV_ID_X550EM_X_KX4:
313 hw->phy.type = ixgbe_phy_x550em_kx4;
314 break;
315 case IXGBE_DEV_ID_X550EM_X_XFI:
316 hw->phy.type = ixgbe_phy_x550em_xfi;
317 break;
318 case IXGBE_DEV_ID_X550EM_X_KR:
319 case IXGBE_DEV_ID_X550EM_A_KR:
320 case IXGBE_DEV_ID_X550EM_A_KR_L:
321 hw->phy.type = ixgbe_phy_x550em_kr;
322 break;
323 case IXGBE_DEV_ID_X550EM_A_10G_T:
324 if (hw->bus.lan_id)
325 hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM;
326 else
327 hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM;
328 fallthrough;
329 case IXGBE_DEV_ID_X550EM_X_10G_T:
330 return ixgbe_identify_phy_generic(hw);
331 case IXGBE_DEV_ID_X550EM_X_1G_T:
332 hw->phy.type = ixgbe_phy_ext_1g_t;
333 break;
334 case IXGBE_DEV_ID_X550EM_A_1G_T:
335 case IXGBE_DEV_ID_X550EM_A_1G_T_L:
336 hw->phy.type = ixgbe_phy_fw;
337 hw->phy.ops.read_reg = NULL;
338 hw->phy.ops.write_reg = NULL;
339 if (hw->bus.lan_id)
340 hw->phy.phy_semaphore_mask |= IXGBE_GSSR_PHY1_SM;
341 else
342 hw->phy.phy_semaphore_mask |= IXGBE_GSSR_PHY0_SM;
343 break;
344 default:
345 break;
346 }
347 return 0;
348 }
349
ixgbe_read_phy_reg_x550em(struct ixgbe_hw * hw,u32 reg_addr,u32 device_type,u16 * phy_data)350 static int ixgbe_read_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr,
351 u32 device_type, u16 *phy_data)
352 {
353 return -EOPNOTSUPP;
354 }
355
ixgbe_write_phy_reg_x550em(struct ixgbe_hw * hw,u32 reg_addr,u32 device_type,u16 phy_data)356 static int ixgbe_write_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr,
357 u32 device_type, u16 phy_data)
358 {
359 return -EOPNOTSUPP;
360 }
361
362 /**
363 * ixgbe_read_i2c_combined_generic - Perform I2C read combined operation
364 * @hw: pointer to the hardware structure
365 * @addr: I2C bus address to read from
366 * @reg: I2C device register to read from
367 * @val: pointer to location to receive read value
368 *
369 * Returns an error code on error.
370 **/
ixgbe_read_i2c_combined_generic(struct ixgbe_hw * hw,u8 addr,u16 reg,u16 * val)371 static int ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr,
372 u16 reg, u16 *val)
373 {
374 return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, true);
375 }
376
377 /**
378 * ixgbe_read_i2c_combined_generic_unlocked - Do I2C read combined operation
379 * @hw: pointer to the hardware structure
380 * @addr: I2C bus address to read from
381 * @reg: I2C device register to read from
382 * @val: pointer to location to receive read value
383 *
384 * Returns an error code on error.
385 **/
386 static int
ixgbe_read_i2c_combined_generic_unlocked(struct ixgbe_hw * hw,u8 addr,u16 reg,u16 * val)387 ixgbe_read_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr,
388 u16 reg, u16 *val)
389 {
390 return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, false);
391 }
392
393 /**
394 * ixgbe_write_i2c_combined_generic - Perform I2C write combined operation
395 * @hw: pointer to the hardware structure
396 * @addr: I2C bus address to write to
397 * @reg: I2C device register to write to
398 * @val: value to write
399 *
400 * Returns an error code on error.
401 **/
ixgbe_write_i2c_combined_generic(struct ixgbe_hw * hw,u8 addr,u16 reg,u16 val)402 static int ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw,
403 u8 addr, u16 reg, u16 val)
404 {
405 return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, true);
406 }
407
408 /**
409 * ixgbe_write_i2c_combined_generic_unlocked - Do I2C write combined operation
410 * @hw: pointer to the hardware structure
411 * @addr: I2C bus address to write to
412 * @reg: I2C device register to write to
413 * @val: value to write
414 *
415 * Returns an error code on error.
416 **/
417 static int
ixgbe_write_i2c_combined_generic_unlocked(struct ixgbe_hw * hw,u8 addr,u16 reg,u16 val)418 ixgbe_write_i2c_combined_generic_unlocked(struct ixgbe_hw *hw,
419 u8 addr, u16 reg, u16 val)
420 {
421 return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, false);
422 }
423
424 /**
425 * ixgbe_fw_phy_activity - Perform an activity on a PHY
426 * @hw: pointer to hardware structure
427 * @activity: activity to perform
428 * @data: Pointer to 4 32-bit words of data
429 */
ixgbe_fw_phy_activity(struct ixgbe_hw * hw,u16 activity,u32 (* data)[FW_PHY_ACT_DATA_COUNT])430 int ixgbe_fw_phy_activity(struct ixgbe_hw *hw, u16 activity,
431 u32 (*data)[FW_PHY_ACT_DATA_COUNT])
432 {
433 union {
434 struct ixgbe_hic_phy_activity_req cmd;
435 struct ixgbe_hic_phy_activity_resp rsp;
436 } hic;
437 u16 retries = FW_PHY_ACT_RETRIES;
438 int rc;
439 u32 i;
440
441 do {
442 memset(&hic, 0, sizeof(hic));
443 hic.cmd.hdr.cmd = FW_PHY_ACT_REQ_CMD;
444 hic.cmd.hdr.buf_len = FW_PHY_ACT_REQ_LEN;
445 hic.cmd.hdr.checksum = FW_DEFAULT_CHECKSUM;
446 hic.cmd.port_number = hw->bus.lan_id;
447 hic.cmd.activity_id = cpu_to_le16(activity);
448 for (i = 0; i < ARRAY_SIZE(hic.cmd.data); ++i)
449 hic.cmd.data[i] = cpu_to_be32((*data)[i]);
450
451 rc = ixgbe_host_interface_command(hw, &hic.cmd, sizeof(hic.cmd),
452 IXGBE_HI_COMMAND_TIMEOUT,
453 true);
454 if (rc)
455 return rc;
456 if (hic.rsp.hdr.cmd_or_resp.ret_status ==
457 FW_CEM_RESP_STATUS_SUCCESS) {
458 for (i = 0; i < FW_PHY_ACT_DATA_COUNT; ++i)
459 (*data)[i] = be32_to_cpu(hic.rsp.data[i]);
460 return 0;
461 }
462 usleep_range(20, 30);
463 --retries;
464 } while (retries > 0);
465
466 return -EIO;
467 }
468
469 static const struct {
470 u16 fw_speed;
471 ixgbe_link_speed phy_speed;
472 } ixgbe_fw_map[] = {
473 { FW_PHY_ACT_LINK_SPEED_10, IXGBE_LINK_SPEED_10_FULL },
474 { FW_PHY_ACT_LINK_SPEED_100, IXGBE_LINK_SPEED_100_FULL },
475 { FW_PHY_ACT_LINK_SPEED_1G, IXGBE_LINK_SPEED_1GB_FULL },
476 { FW_PHY_ACT_LINK_SPEED_2_5G, IXGBE_LINK_SPEED_2_5GB_FULL },
477 { FW_PHY_ACT_LINK_SPEED_5G, IXGBE_LINK_SPEED_5GB_FULL },
478 { FW_PHY_ACT_LINK_SPEED_10G, IXGBE_LINK_SPEED_10GB_FULL },
479 };
480
481 /**
482 * ixgbe_get_phy_id_fw - Get the phy ID via firmware command
483 * @hw: pointer to hardware structure
484 *
485 * Returns error code
486 */
ixgbe_get_phy_id_fw(struct ixgbe_hw * hw)487 static int ixgbe_get_phy_id_fw(struct ixgbe_hw *hw)
488 {
489 u32 info[FW_PHY_ACT_DATA_COUNT] = { 0 };
490 u16 phy_speeds;
491 u16 phy_id_lo;
492 int rc;
493 u16 i;
494
495 if (hw->phy.id)
496 return 0;
497
498 rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_PHY_INFO, &info);
499 if (rc)
500 return rc;
501
502 hw->phy.speeds_supported = 0;
503 phy_speeds = info[0] & FW_PHY_INFO_SPEED_MASK;
504 for (i = 0; i < ARRAY_SIZE(ixgbe_fw_map); ++i) {
505 if (phy_speeds & ixgbe_fw_map[i].fw_speed)
506 hw->phy.speeds_supported |= ixgbe_fw_map[i].phy_speed;
507 }
508
509 hw->phy.id = info[0] & FW_PHY_INFO_ID_HI_MASK;
510 phy_id_lo = info[1] & FW_PHY_INFO_ID_LO_MASK;
511 hw->phy.id |= phy_id_lo & IXGBE_PHY_REVISION_MASK;
512 hw->phy.revision = phy_id_lo & ~IXGBE_PHY_REVISION_MASK;
513 if (!hw->phy.id || hw->phy.id == IXGBE_PHY_REVISION_MASK)
514 return -EFAULT;
515
516 hw->phy.autoneg_advertised = hw->phy.speeds_supported;
517 hw->phy.eee_speeds_supported = IXGBE_LINK_SPEED_100_FULL |
518 IXGBE_LINK_SPEED_1GB_FULL;
519 hw->phy.eee_speeds_advertised = hw->phy.eee_speeds_supported;
520 return 0;
521 }
522
523 /**
524 * ixgbe_identify_phy_fw - Get PHY type based on firmware command
525 * @hw: pointer to hardware structure
526 *
527 * Returns error code
528 */
ixgbe_identify_phy_fw(struct ixgbe_hw * hw)529 static int ixgbe_identify_phy_fw(struct ixgbe_hw *hw)
530 {
531 if (hw->bus.lan_id)
532 hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM;
533 else
534 hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM;
535
536 hw->phy.type = ixgbe_phy_fw;
537 hw->phy.ops.read_reg = NULL;
538 hw->phy.ops.write_reg = NULL;
539 return ixgbe_get_phy_id_fw(hw);
540 }
541
542 /**
543 * ixgbe_shutdown_fw_phy - Shutdown a firmware-controlled PHY
544 * @hw: pointer to hardware structure
545 *
546 * Returns error code
547 */
ixgbe_shutdown_fw_phy(struct ixgbe_hw * hw)548 static int ixgbe_shutdown_fw_phy(struct ixgbe_hw *hw)
549 {
550 u32 setup[FW_PHY_ACT_DATA_COUNT] = { 0 };
551
552 setup[0] = FW_PHY_ACT_FORCE_LINK_DOWN_OFF;
553 return ixgbe_fw_phy_activity(hw, FW_PHY_ACT_FORCE_LINK_DOWN, &setup);
554 }
555
556 /**
557 * ixgbe_setup_fw_link - Setup firmware-controlled PHYs
558 * @hw: pointer to hardware structure
559 */
ixgbe_setup_fw_link(struct ixgbe_hw * hw)560 static int ixgbe_setup_fw_link(struct ixgbe_hw *hw)
561 {
562 u32 setup[FW_PHY_ACT_DATA_COUNT] = { 0 };
563 int rc;
564 u16 i;
565
566 if (hw->phy.reset_disable || ixgbe_check_reset_blocked(hw))
567 return 0;
568
569 if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
570 hw_err(hw, "rx_pause not valid in strict IEEE mode\n");
571 return -EINVAL;
572 }
573
574 switch (hw->fc.requested_mode) {
575 case ixgbe_fc_full:
576 setup[0] |= FW_PHY_ACT_SETUP_LINK_PAUSE_RXTX <<
577 FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT;
578 break;
579 case ixgbe_fc_rx_pause:
580 setup[0] |= FW_PHY_ACT_SETUP_LINK_PAUSE_RX <<
581 FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT;
582 break;
583 case ixgbe_fc_tx_pause:
584 setup[0] |= FW_PHY_ACT_SETUP_LINK_PAUSE_TX <<
585 FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT;
586 break;
587 default:
588 break;
589 }
590
591 for (i = 0; i < ARRAY_SIZE(ixgbe_fw_map); ++i) {
592 if (hw->phy.autoneg_advertised & ixgbe_fw_map[i].phy_speed)
593 setup[0] |= ixgbe_fw_map[i].fw_speed;
594 }
595 setup[0] |= FW_PHY_ACT_SETUP_LINK_HP | FW_PHY_ACT_SETUP_LINK_AN;
596
597 if (hw->phy.eee_speeds_advertised)
598 setup[0] |= FW_PHY_ACT_SETUP_LINK_EEE;
599
600 rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_SETUP_LINK, &setup);
601 if (rc)
602 return rc;
603
604 if (setup[0] == FW_PHY_ACT_SETUP_LINK_RSP_DOWN)
605 return -EIO;
606
607 return 0;
608 }
609
610 /**
611 * ixgbe_fc_autoneg_fw - Set up flow control for FW-controlled PHYs
612 * @hw: pointer to hardware structure
613 *
614 * Called at init time to set up flow control.
615 */
ixgbe_fc_autoneg_fw(struct ixgbe_hw * hw)616 static int ixgbe_fc_autoneg_fw(struct ixgbe_hw *hw)
617 {
618 if (hw->fc.requested_mode == ixgbe_fc_default)
619 hw->fc.requested_mode = ixgbe_fc_full;
620
621 return ixgbe_setup_fw_link(hw);
622 }
623
624 /** ixgbe_init_eeprom_params_X550 - Initialize EEPROM params
625 * @hw: pointer to hardware structure
626 *
627 * Initializes the EEPROM parameters ixgbe_eeprom_info within the
628 * ixgbe_hw struct in order to set up EEPROM access.
629 **/
ixgbe_init_eeprom_params_X550(struct ixgbe_hw * hw)630 static int ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw)
631 {
632 struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
633
634 if (eeprom->type == ixgbe_eeprom_uninitialized) {
635 u16 eeprom_size;
636 u32 eec;
637
638 eeprom->semaphore_delay = 10;
639 eeprom->type = ixgbe_flash;
640
641 eec = IXGBE_READ_REG(hw, IXGBE_EEC(hw));
642 eeprom_size = FIELD_GET(IXGBE_EEC_SIZE, eec);
643 eeprom->word_size = BIT(eeprom_size +
644 IXGBE_EEPROM_WORD_SIZE_SHIFT);
645
646 hw_dbg(hw, "Eeprom params: type = %d, size = %d\n",
647 eeprom->type, eeprom->word_size);
648 }
649
650 return 0;
651 }
652
653 /**
654 * ixgbe_iosf_wait - Wait for IOSF command completion
655 * @hw: pointer to hardware structure
656 * @ctrl: pointer to location to receive final IOSF control value
657 *
658 * Return: failing status on timeout
659 *
660 * Note: ctrl can be NULL if the IOSF control register value is not needed
661 */
ixgbe_iosf_wait(struct ixgbe_hw * hw,u32 * ctrl)662 static int ixgbe_iosf_wait(struct ixgbe_hw *hw, u32 *ctrl)
663 {
664 u32 i, command;
665
666 /* Check every 10 usec to see if the address cycle completed.
667 * The SB IOSF BUSY bit will clear when the operation is
668 * complete.
669 */
670 for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
671 command = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL);
672 if (!(command & IXGBE_SB_IOSF_CTRL_BUSY))
673 break;
674 udelay(10);
675 }
676 if (ctrl)
677 *ctrl = command;
678 if (i == IXGBE_MDIO_COMMAND_TIMEOUT) {
679 hw_dbg(hw, "IOSF wait timed out\n");
680 return -EIO;
681 }
682
683 return 0;
684 }
685
686 /** ixgbe_read_iosf_sb_reg_x550 - Writes a value to specified register of the
687 * IOSF device
688 * @hw: pointer to hardware structure
689 * @reg_addr: 32 bit PHY register to write
690 * @device_type: 3 bit device type
691 * @phy_data: Pointer to read data from the register
692 **/
ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw * hw,u32 reg_addr,u32 device_type,u32 * data)693 static int ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
694 u32 device_type, u32 *data)
695 {
696 u32 gssr = IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_PHY0_SM;
697 u32 command, error;
698 int ret;
699
700 ret = hw->mac.ops.acquire_swfw_sync(hw, gssr);
701 if (ret)
702 return ret;
703
704 ret = ixgbe_iosf_wait(hw, NULL);
705 if (ret)
706 goto out;
707
708 command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) |
709 (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT));
710
711 /* Write IOSF control register */
712 IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command);
713
714 ret = ixgbe_iosf_wait(hw, &command);
715
716 if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) {
717 error = FIELD_GET(IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK, command);
718 hw_dbg(hw, "Failed to read, error %x\n", error);
719 ret = -EIO;
720 goto out;
721 }
722
723 if (!ret)
724 *data = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA);
725
726 out:
727 hw->mac.ops.release_swfw_sync(hw, gssr);
728 return ret;
729 }
730
731 /**
732 * ixgbe_get_phy_token - Get the token for shared PHY access
733 * @hw: Pointer to hardware structure
734 */
ixgbe_get_phy_token(struct ixgbe_hw * hw)735 static int ixgbe_get_phy_token(struct ixgbe_hw *hw)
736 {
737 struct ixgbe_hic_phy_token_req token_cmd;
738 int status;
739
740 token_cmd.hdr.cmd = FW_PHY_TOKEN_REQ_CMD;
741 token_cmd.hdr.buf_len = FW_PHY_TOKEN_REQ_LEN;
742 token_cmd.hdr.cmd_or_resp.cmd_resv = 0;
743 token_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM;
744 token_cmd.port_number = hw->bus.lan_id;
745 token_cmd.command_type = FW_PHY_TOKEN_REQ;
746 token_cmd.pad = 0;
747 status = ixgbe_host_interface_command(hw, &token_cmd, sizeof(token_cmd),
748 IXGBE_HI_COMMAND_TIMEOUT,
749 true);
750 if (status)
751 return status;
752 if (token_cmd.hdr.cmd_or_resp.ret_status == FW_PHY_TOKEN_OK)
753 return 0;
754 if (token_cmd.hdr.cmd_or_resp.ret_status != FW_PHY_TOKEN_RETRY)
755 return -EIO;
756
757 return -EAGAIN;
758 }
759
760 /**
761 * ixgbe_put_phy_token - Put the token for shared PHY access
762 * @hw: Pointer to hardware structure
763 */
ixgbe_put_phy_token(struct ixgbe_hw * hw)764 static int ixgbe_put_phy_token(struct ixgbe_hw *hw)
765 {
766 struct ixgbe_hic_phy_token_req token_cmd;
767 int status;
768
769 token_cmd.hdr.cmd = FW_PHY_TOKEN_REQ_CMD;
770 token_cmd.hdr.buf_len = FW_PHY_TOKEN_REQ_LEN;
771 token_cmd.hdr.cmd_or_resp.cmd_resv = 0;
772 token_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM;
773 token_cmd.port_number = hw->bus.lan_id;
774 token_cmd.command_type = FW_PHY_TOKEN_REL;
775 token_cmd.pad = 0;
776 status = ixgbe_host_interface_command(hw, &token_cmd, sizeof(token_cmd),
777 IXGBE_HI_COMMAND_TIMEOUT,
778 true);
779 if (status)
780 return status;
781 if (token_cmd.hdr.cmd_or_resp.ret_status == FW_PHY_TOKEN_OK)
782 return 0;
783 return -EIO;
784 }
785
786 /**
787 * ixgbe_write_iosf_sb_reg_x550a - Write to IOSF PHY register
788 * @hw: pointer to hardware structure
789 * @reg_addr: 32 bit PHY register to write
790 * @device_type: 3 bit device type
791 * @data: Data to write to the register
792 **/
ixgbe_write_iosf_sb_reg_x550a(struct ixgbe_hw * hw,u32 reg_addr,__always_unused u32 device_type,u32 data)793 static int ixgbe_write_iosf_sb_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr,
794 __always_unused u32 device_type,
795 u32 data)
796 {
797 struct ixgbe_hic_internal_phy_req write_cmd;
798
799 memset(&write_cmd, 0, sizeof(write_cmd));
800 write_cmd.hdr.cmd = FW_INT_PHY_REQ_CMD;
801 write_cmd.hdr.buf_len = FW_INT_PHY_REQ_LEN;
802 write_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM;
803 write_cmd.port_number = hw->bus.lan_id;
804 write_cmd.command_type = FW_INT_PHY_REQ_WRITE;
805 write_cmd.address = cpu_to_be16(reg_addr);
806 write_cmd.write_data = cpu_to_be32(data);
807
808 return ixgbe_host_interface_command(hw, &write_cmd, sizeof(write_cmd),
809 IXGBE_HI_COMMAND_TIMEOUT, false);
810 }
811
812 /**
813 * ixgbe_read_iosf_sb_reg_x550a - Read from IOSF PHY register
814 * @hw: pointer to hardware structure
815 * @reg_addr: 32 bit PHY register to write
816 * @device_type: 3 bit device type
817 * @data: Pointer to read data from the register
818 **/
ixgbe_read_iosf_sb_reg_x550a(struct ixgbe_hw * hw,u32 reg_addr,__always_unused u32 device_type,u32 * data)819 static int ixgbe_read_iosf_sb_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr,
820 __always_unused u32 device_type,
821 u32 *data)
822 {
823 union {
824 struct ixgbe_hic_internal_phy_req cmd;
825 struct ixgbe_hic_internal_phy_resp rsp;
826 } hic;
827 int status;
828
829 memset(&hic, 0, sizeof(hic));
830 hic.cmd.hdr.cmd = FW_INT_PHY_REQ_CMD;
831 hic.cmd.hdr.buf_len = FW_INT_PHY_REQ_LEN;
832 hic.cmd.hdr.checksum = FW_DEFAULT_CHECKSUM;
833 hic.cmd.port_number = hw->bus.lan_id;
834 hic.cmd.command_type = FW_INT_PHY_REQ_READ;
835 hic.cmd.address = cpu_to_be16(reg_addr);
836
837 status = ixgbe_host_interface_command(hw, &hic.cmd, sizeof(hic.cmd),
838 IXGBE_HI_COMMAND_TIMEOUT, true);
839
840 /* Extract the register value from the response. */
841 *data = be32_to_cpu(hic.rsp.read_data);
842
843 return status;
844 }
845
846 /** ixgbe_read_ee_hostif_buffer_X550- Read EEPROM word(s) using hostif
847 * @hw: pointer to hardware structure
848 * @offset: offset of word in the EEPROM to read
849 * @words: number of words
850 * @data: word(s) read from the EEPROM
851 *
852 * Reads a 16 bit word(s) from the EEPROM using the hostif.
853 **/
ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw * hw,u16 offset,u16 words,u16 * data)854 static int ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
855 u16 offset, u16 words, u16 *data)
856 {
857 const u32 mask = IXGBE_GSSR_SW_MNG_SM | IXGBE_GSSR_EEP_SM;
858 struct ixgbe_hic_read_shadow_ram buffer;
859 u32 current_word = 0;
860 u16 words_to_read;
861 int status;
862 u32 i;
863
864 /* Take semaphore for the entire operation. */
865 status = hw->mac.ops.acquire_swfw_sync(hw, mask);
866 if (status) {
867 hw_dbg(hw, "EEPROM read buffer - semaphore failed\n");
868 return status;
869 }
870
871 while (words) {
872 if (words > FW_MAX_READ_BUFFER_SIZE / 2)
873 words_to_read = FW_MAX_READ_BUFFER_SIZE / 2;
874 else
875 words_to_read = words;
876
877 buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD;
878 buffer.hdr.req.buf_lenh = 0;
879 buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN;
880 buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
881
882 /* convert offset from words to bytes */
883 buffer.address = (__force u32)cpu_to_be32((offset +
884 current_word) * 2);
885 buffer.length = (__force u16)cpu_to_be16(words_to_read * 2);
886 buffer.pad2 = 0;
887 buffer.pad3 = 0;
888
889 status = ixgbe_hic_unlocked(hw, (u32 *)&buffer, sizeof(buffer),
890 IXGBE_HI_COMMAND_TIMEOUT);
891 if (status) {
892 hw_dbg(hw, "Host interface command failed\n");
893 goto out;
894 }
895
896 for (i = 0; i < words_to_read; i++) {
897 u32 reg = IXGBE_FLEX_MNG + (FW_NVM_DATA_OFFSET << 2) +
898 2 * i;
899 u32 value = IXGBE_READ_REG(hw, reg);
900
901 data[current_word] = (u16)(value & 0xffff);
902 current_word++;
903 i++;
904 if (i < words_to_read) {
905 value >>= 16;
906 data[current_word] = (u16)(value & 0xffff);
907 current_word++;
908 }
909 }
910 words -= words_to_read;
911 }
912
913 out:
914 hw->mac.ops.release_swfw_sync(hw, mask);
915 return status;
916 }
917
918 /** ixgbe_checksum_ptr_x550 - Checksum one pointer region
919 * @hw: pointer to hardware structure
920 * @ptr: pointer offset in eeprom
921 * @size: size of section pointed by ptr, if 0 first word will be used as size
922 * @csum: address of checksum to update
923 *
924 * Returns error status for any failure
925 **/
ixgbe_checksum_ptr_x550(struct ixgbe_hw * hw,u16 ptr,u16 size,u16 * csum,u16 * buffer,u32 buffer_size)926 static int ixgbe_checksum_ptr_x550(struct ixgbe_hw *hw, u16 ptr,
927 u16 size, u16 *csum, u16 *buffer,
928 u32 buffer_size)
929 {
930 u16 length, bufsz, i, start;
931 u16 *local_buffer;
932 u16 buf[256];
933 int status;
934
935 bufsz = ARRAY_SIZE(buf);
936
937 /* Read a chunk at the pointer location */
938 if (!buffer) {
939 status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr, bufsz, buf);
940 if (status) {
941 hw_dbg(hw, "Failed to read EEPROM image\n");
942 return status;
943 }
944 local_buffer = buf;
945 } else {
946 if (buffer_size < ptr)
947 return -EINVAL;
948 local_buffer = &buffer[ptr];
949 }
950
951 if (size) {
952 start = 0;
953 length = size;
954 } else {
955 start = 1;
956 length = local_buffer[0];
957
958 /* Skip pointer section if length is invalid. */
959 if (length == 0xFFFF || length == 0 ||
960 (ptr + length) >= hw->eeprom.word_size)
961 return 0;
962 }
963
964 if (buffer && ((u32)start + (u32)length > buffer_size))
965 return -EINVAL;
966
967 for (i = start; length; i++, length--) {
968 if (i == bufsz && !buffer) {
969 ptr += bufsz;
970 i = 0;
971 if (length < bufsz)
972 bufsz = length;
973
974 /* Read a chunk at the pointer location */
975 status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr,
976 bufsz, buf);
977 if (status) {
978 hw_dbg(hw, "Failed to read EEPROM image\n");
979 return status;
980 }
981 }
982 *csum += local_buffer[i];
983 }
984 return 0;
985 }
986
987 /** ixgbe_calc_checksum_X550 - Calculates and returns the checksum
988 * @hw: pointer to hardware structure
989 * @buffer: pointer to buffer containing calculated checksum
990 * @buffer_size: size of buffer
991 *
992 * Returns a negative error code on error, or the 16-bit checksum
993 **/
ixgbe_calc_checksum_X550(struct ixgbe_hw * hw,u16 * buffer,u32 buffer_size)994 static int ixgbe_calc_checksum_X550(struct ixgbe_hw *hw, u16 *buffer,
995 u32 buffer_size)
996 {
997 u16 eeprom_ptrs[IXGBE_EEPROM_LAST_WORD + 1];
998 u16 pointer, i, size;
999 u16 *local_buffer;
1000 u16 checksum = 0;
1001 int status;
1002
1003 hw->eeprom.ops.init_params(hw);
1004
1005 if (!buffer) {
1006 /* Read pointer area */
1007 status = ixgbe_read_ee_hostif_buffer_X550(hw, 0,
1008 IXGBE_EEPROM_LAST_WORD + 1,
1009 eeprom_ptrs);
1010 if (status) {
1011 hw_dbg(hw, "Failed to read EEPROM image\n");
1012 return status;
1013 }
1014 local_buffer = eeprom_ptrs;
1015 } else {
1016 if (buffer_size < IXGBE_EEPROM_LAST_WORD)
1017 return -EINVAL;
1018 local_buffer = buffer;
1019 }
1020
1021 /* For X550 hardware include 0x0-0x41 in the checksum, skip the
1022 * checksum word itself
1023 */
1024 for (i = 0; i <= IXGBE_EEPROM_LAST_WORD; i++)
1025 if (i != IXGBE_EEPROM_CHECKSUM)
1026 checksum += local_buffer[i];
1027
1028 /* Include all data from pointers 0x3, 0x6-0xE. This excludes the
1029 * FW, PHY module, and PCIe Expansion/Option ROM pointers.
1030 */
1031 for (i = IXGBE_PCIE_ANALOG_PTR_X550; i < IXGBE_FW_PTR; i++) {
1032 if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR)
1033 continue;
1034
1035 pointer = local_buffer[i];
1036
1037 /* Skip pointer section if the pointer is invalid. */
1038 if (pointer == 0xFFFF || pointer == 0 ||
1039 pointer >= hw->eeprom.word_size)
1040 continue;
1041
1042 switch (i) {
1043 case IXGBE_PCIE_GENERAL_PTR:
1044 size = IXGBE_IXGBE_PCIE_GENERAL_SIZE;
1045 break;
1046 case IXGBE_PCIE_CONFIG0_PTR:
1047 case IXGBE_PCIE_CONFIG1_PTR:
1048 size = IXGBE_PCIE_CONFIG_SIZE;
1049 break;
1050 default:
1051 size = 0;
1052 break;
1053 }
1054
1055 status = ixgbe_checksum_ptr_x550(hw, pointer, size, &checksum,
1056 buffer, buffer_size);
1057 if (status)
1058 return status;
1059 }
1060
1061 checksum = (u16)IXGBE_EEPROM_SUM - checksum;
1062
1063 return (int)checksum;
1064 }
1065
1066 /** ixgbe_calc_eeprom_checksum_X550 - Calculates and returns the checksum
1067 * @hw: pointer to hardware structure
1068 *
1069 * Returns a negative error code on error, or the 16-bit checksum
1070 **/
ixgbe_calc_eeprom_checksum_X550(struct ixgbe_hw * hw)1071 static int ixgbe_calc_eeprom_checksum_X550(struct ixgbe_hw *hw)
1072 {
1073 return ixgbe_calc_checksum_X550(hw, NULL, 0);
1074 }
1075
1076 /** ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command
1077 * @hw: pointer to hardware structure
1078 * @offset: offset of word in the EEPROM to read
1079 * @data: word read from the EEPROM
1080 *
1081 * Reads a 16 bit word from the EEPROM using the hostif.
1082 **/
ixgbe_read_ee_hostif_X550(struct ixgbe_hw * hw,u16 offset,u16 * data)1083 static int ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 *data)
1084 {
1085 const u32 mask = IXGBE_GSSR_SW_MNG_SM | IXGBE_GSSR_EEP_SM;
1086 struct ixgbe_hic_read_shadow_ram buffer;
1087 int status;
1088
1089 buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD;
1090 buffer.hdr.req.buf_lenh = 0;
1091 buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN;
1092 buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
1093
1094 /* convert offset from words to bytes */
1095 buffer.address = (__force u32)cpu_to_be32(offset * 2);
1096 /* one word */
1097 buffer.length = (__force u16)cpu_to_be16(sizeof(u16));
1098
1099 status = hw->mac.ops.acquire_swfw_sync(hw, mask);
1100 if (status)
1101 return status;
1102
1103 status = ixgbe_hic_unlocked(hw, (u32 *)&buffer, sizeof(buffer),
1104 IXGBE_HI_COMMAND_TIMEOUT);
1105 if (!status) {
1106 *data = (u16)IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG,
1107 FW_NVM_DATA_OFFSET);
1108 }
1109
1110 hw->mac.ops.release_swfw_sync(hw, mask);
1111 return status;
1112 }
1113
1114 /** ixgbe_validate_eeprom_checksum_X550 - Validate EEPROM checksum
1115 * @hw: pointer to hardware structure
1116 * @checksum_val: calculated checksum
1117 *
1118 * Performs checksum calculation and validates the EEPROM checksum. If the
1119 * caller does not need checksum_val, the value can be NULL.
1120 **/
ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw * hw,u16 * checksum_val)1121 static int ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw *hw,
1122 u16 *checksum_val)
1123 {
1124 u16 read_checksum = 0;
1125 u16 checksum;
1126 int status;
1127
1128 /* Read the first word from the EEPROM. If this times out or fails, do
1129 * not continue or we could be in for a very long wait while every
1130 * EEPROM read fails
1131 */
1132 status = hw->eeprom.ops.read(hw, 0, &checksum);
1133 if (status) {
1134 hw_dbg(hw, "EEPROM read failed\n");
1135 return status;
1136 }
1137
1138 status = hw->eeprom.ops.calc_checksum(hw);
1139 if (status < 0)
1140 return status;
1141
1142 checksum = (u16)(status & 0xffff);
1143
1144 status = ixgbe_read_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM,
1145 &read_checksum);
1146 if (status)
1147 return status;
1148
1149 /* Verify read checksum from EEPROM is the same as
1150 * calculated checksum
1151 */
1152 if (read_checksum != checksum) {
1153 status = -EIO;
1154 hw_dbg(hw, "Invalid EEPROM checksum");
1155 }
1156
1157 /* If the user cares, return the calculated checksum */
1158 if (checksum_val)
1159 *checksum_val = checksum;
1160
1161 return status;
1162 }
1163
1164 /** ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
1165 * @hw: pointer to hardware structure
1166 * @offset: offset of word in the EEPROM to write
1167 * @data: word write to the EEPROM
1168 *
1169 * Write a 16 bit word to the EEPROM using the hostif.
1170 **/
ixgbe_write_ee_hostif_data_X550(struct ixgbe_hw * hw,u16 offset,u16 data)1171 static int ixgbe_write_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset,
1172 u16 data)
1173 {
1174 struct ixgbe_hic_write_shadow_ram buffer;
1175 int status;
1176
1177 buffer.hdr.req.cmd = FW_WRITE_SHADOW_RAM_CMD;
1178 buffer.hdr.req.buf_lenh = 0;
1179 buffer.hdr.req.buf_lenl = FW_WRITE_SHADOW_RAM_LEN;
1180 buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
1181
1182 /* one word */
1183 buffer.length = cpu_to_be16(sizeof(u16));
1184 buffer.data = data;
1185 buffer.address = cpu_to_be32(offset * 2);
1186
1187 status = ixgbe_host_interface_command(hw, &buffer, sizeof(buffer),
1188 IXGBE_HI_COMMAND_TIMEOUT, false);
1189 return status;
1190 }
1191
1192 /** ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
1193 * @hw: pointer to hardware structure
1194 * @offset: offset of word in the EEPROM to write
1195 * @data: word write to the EEPROM
1196 *
1197 * Write a 16 bit word to the EEPROM using the hostif.
1198 **/
ixgbe_write_ee_hostif_X550(struct ixgbe_hw * hw,u16 offset,u16 data)1199 static int ixgbe_write_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 data)
1200 {
1201 int status = 0;
1202
1203 if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) {
1204 status = ixgbe_write_ee_hostif_data_X550(hw, offset, data);
1205 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
1206 } else {
1207 hw_dbg(hw, "write ee hostif failed to get semaphore");
1208 status = -EBUSY;
1209 }
1210
1211 return status;
1212 }
1213
1214 /** ixgbe_update_flash_X550 - Instruct HW to copy EEPROM to Flash device
1215 * @hw: pointer to hardware structure
1216 *
1217 * Issue a shadow RAM dump to FW to copy EEPROM from shadow RAM to the flash.
1218 **/
ixgbe_update_flash_X550(struct ixgbe_hw * hw)1219 static int ixgbe_update_flash_X550(struct ixgbe_hw *hw)
1220 {
1221 union ixgbe_hic_hdr2 buffer;
1222 int status = 0;
1223
1224 buffer.req.cmd = FW_SHADOW_RAM_DUMP_CMD;
1225 buffer.req.buf_lenh = 0;
1226 buffer.req.buf_lenl = FW_SHADOW_RAM_DUMP_LEN;
1227 buffer.req.checksum = FW_DEFAULT_CHECKSUM;
1228
1229 status = ixgbe_host_interface_command(hw, &buffer, sizeof(buffer),
1230 IXGBE_HI_COMMAND_TIMEOUT, false);
1231 return status;
1232 }
1233
1234 /**
1235 * ixgbe_get_bus_info_X550em - Set PCI bus info
1236 * @hw: pointer to hardware structure
1237 *
1238 * Sets bus link width and speed to unknown because X550em is
1239 * not a PCI device.
1240 **/
ixgbe_get_bus_info_X550em(struct ixgbe_hw * hw)1241 static int ixgbe_get_bus_info_X550em(struct ixgbe_hw *hw)
1242 {
1243 hw->bus.type = ixgbe_bus_type_internal;
1244 hw->bus.width = ixgbe_bus_width_unknown;
1245 hw->bus.speed = ixgbe_bus_speed_unknown;
1246
1247 hw->mac.ops.set_lan_id(hw);
1248
1249 return 0;
1250 }
1251
1252 /**
1253 * ixgbe_fw_recovery_mode_X550 - Check FW NVM recovery mode
1254 * @hw: pointer t hardware structure
1255 *
1256 * Returns true if in FW NVM recovery mode.
1257 */
ixgbe_fw_recovery_mode_X550(struct ixgbe_hw * hw)1258 static bool ixgbe_fw_recovery_mode_X550(struct ixgbe_hw *hw)
1259 {
1260 u32 fwsm;
1261
1262 fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM(hw));
1263 return !!(fwsm & IXGBE_FWSM_FW_NVM_RECOVERY_MODE);
1264 }
1265
1266 /** ixgbe_disable_rx_x550 - Disable RX unit
1267 *
1268 * Enables the Rx DMA unit for x550
1269 **/
ixgbe_disable_rx_x550(struct ixgbe_hw * hw)1270 static void ixgbe_disable_rx_x550(struct ixgbe_hw *hw)
1271 {
1272 struct ixgbe_hic_disable_rxen fw_cmd;
1273 u32 rxctrl, pfdtxgswc;
1274 int status;
1275
1276 rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
1277 if (rxctrl & IXGBE_RXCTRL_RXEN) {
1278 pfdtxgswc = IXGBE_READ_REG(hw, IXGBE_PFDTXGSWC);
1279 if (pfdtxgswc & IXGBE_PFDTXGSWC_VT_LBEN) {
1280 pfdtxgswc &= ~IXGBE_PFDTXGSWC_VT_LBEN;
1281 IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, pfdtxgswc);
1282 hw->mac.set_lben = true;
1283 } else {
1284 hw->mac.set_lben = false;
1285 }
1286
1287 fw_cmd.hdr.cmd = FW_DISABLE_RXEN_CMD;
1288 fw_cmd.hdr.buf_len = FW_DISABLE_RXEN_LEN;
1289 fw_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM;
1290 fw_cmd.port_number = hw->bus.lan_id;
1291
1292 status = ixgbe_host_interface_command(hw, &fw_cmd,
1293 sizeof(struct ixgbe_hic_disable_rxen),
1294 IXGBE_HI_COMMAND_TIMEOUT, true);
1295
1296 /* If we fail - disable RX using register write */
1297 if (status) {
1298 rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
1299 if (rxctrl & IXGBE_RXCTRL_RXEN) {
1300 rxctrl &= ~IXGBE_RXCTRL_RXEN;
1301 IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl);
1302 }
1303 }
1304 }
1305 }
1306
1307 /** ixgbe_update_eeprom_checksum_X550 - Updates the EEPROM checksum and flash
1308 * @hw: pointer to hardware structure
1309 *
1310 * After writing EEPROM to shadow RAM using EEWR register, software calculates
1311 * checksum and updates the EEPROM and instructs the hardware to update
1312 * the flash.
1313 **/
ixgbe_update_eeprom_checksum_X550(struct ixgbe_hw * hw)1314 static int ixgbe_update_eeprom_checksum_X550(struct ixgbe_hw *hw)
1315 {
1316 u16 checksum = 0;
1317 int status;
1318
1319 /* Read the first word from the EEPROM. If this times out or fails, do
1320 * not continue or we could be in for a very long wait while every
1321 * EEPROM read fails
1322 */
1323 status = ixgbe_read_ee_hostif_X550(hw, 0, &checksum);
1324 if (status) {
1325 hw_dbg(hw, "EEPROM read failed\n");
1326 return status;
1327 }
1328
1329 status = ixgbe_calc_eeprom_checksum_X550(hw);
1330 if (status < 0)
1331 return status;
1332
1333 checksum = (u16)(status & 0xffff);
1334
1335 status = ixgbe_write_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM,
1336 checksum);
1337 if (status)
1338 return status;
1339
1340 status = ixgbe_update_flash_X550(hw);
1341
1342 return status;
1343 }
1344
1345 /** ixgbe_write_ee_hostif_buffer_X550 - Write EEPROM word(s) using hostif
1346 * @hw: pointer to hardware structure
1347 * @offset: offset of word in the EEPROM to write
1348 * @words: number of words
1349 * @data: word(s) write to the EEPROM
1350 *
1351 *
1352 * Write a 16 bit word(s) to the EEPROM using the hostif.
1353 **/
ixgbe_write_ee_hostif_buffer_X550(struct ixgbe_hw * hw,u16 offset,u16 words,u16 * data)1354 static int ixgbe_write_ee_hostif_buffer_X550(struct ixgbe_hw *hw,
1355 u16 offset, u16 words,
1356 u16 *data)
1357 {
1358 int status = 0;
1359 u32 i = 0;
1360
1361 /* Take semaphore for the entire operation. */
1362 status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
1363 if (status) {
1364 hw_dbg(hw, "EEPROM write buffer - semaphore failed\n");
1365 return status;
1366 }
1367
1368 for (i = 0; i < words; i++) {
1369 status = ixgbe_write_ee_hostif_data_X550(hw, offset + i,
1370 data[i]);
1371 if (status) {
1372 hw_dbg(hw, "Eeprom buffered write failed\n");
1373 break;
1374 }
1375 }
1376
1377 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
1378
1379 return status;
1380 }
1381
1382 /** ixgbe_write_iosf_sb_reg_x550 - Writes a value to specified register of the
1383 * IOSF device
1384 *
1385 * @hw: pointer to hardware structure
1386 * @reg_addr: 32 bit PHY register to write
1387 * @device_type: 3 bit device type
1388 * @data: Data to write to the register
1389 **/
ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw * hw,u32 reg_addr,u32 device_type,u32 data)1390 static int ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
1391 u32 device_type, u32 data)
1392 {
1393 u32 gssr = IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_PHY0_SM;
1394 u32 command, error;
1395 int ret;
1396
1397 ret = hw->mac.ops.acquire_swfw_sync(hw, gssr);
1398 if (ret)
1399 return ret;
1400
1401 ret = ixgbe_iosf_wait(hw, NULL);
1402 if (ret)
1403 goto out;
1404
1405 command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) |
1406 (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT));
1407
1408 /* Write IOSF control register */
1409 IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command);
1410
1411 /* Write IOSF data register */
1412 IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA, data);
1413
1414 ret = ixgbe_iosf_wait(hw, &command);
1415
1416 if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) {
1417 error = FIELD_GET(IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK, command);
1418 hw_dbg(hw, "Failed to write, error %x\n", error);
1419 return -EIO;
1420 }
1421
1422 out:
1423 hw->mac.ops.release_swfw_sync(hw, gssr);
1424 return ret;
1425 }
1426
1427 /**
1428 * ixgbe_setup_ixfi_x550em_x - MAC specific iXFI configuration
1429 * @hw: pointer to hardware structure
1430 *
1431 * iXfI configuration needed for ixgbe_mac_X550EM_x devices.
1432 **/
ixgbe_setup_ixfi_x550em_x(struct ixgbe_hw * hw)1433 static int ixgbe_setup_ixfi_x550em_x(struct ixgbe_hw *hw)
1434 {
1435 u32 reg_val;
1436 int status;
1437
1438 /* Disable training protocol FSM. */
1439 status = ixgbe_read_iosf_sb_reg_x550(hw,
1440 IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
1441 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
1442 if (status)
1443 return status;
1444
1445 reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_CONV_WO_PROTOCOL;
1446 status = ixgbe_write_iosf_sb_reg_x550(hw,
1447 IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
1448 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
1449 if (status)
1450 return status;
1451
1452 /* Disable Flex from training TXFFE. */
1453 status = ixgbe_read_iosf_sb_reg_x550(hw,
1454 IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id),
1455 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
1456 if (status)
1457 return status;
1458
1459 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN;
1460 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN;
1461 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN;
1462 status = ixgbe_write_iosf_sb_reg_x550(hw,
1463 IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id),
1464 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
1465 if (status)
1466 return status;
1467
1468 status = ixgbe_read_iosf_sb_reg_x550(hw,
1469 IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id),
1470 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
1471 if (status)
1472 return status;
1473
1474 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN;
1475 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN;
1476 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN;
1477 status = ixgbe_write_iosf_sb_reg_x550(hw,
1478 IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id),
1479 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
1480 if (status)
1481 return status;
1482
1483 /* Enable override for coefficients. */
1484 status = ixgbe_read_iosf_sb_reg_x550(hw,
1485 IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id),
1486 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
1487 if (status)
1488 return status;
1489
1490 reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_OVRRD_EN;
1491 reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CZERO_EN;
1492 reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CPLUS1_OVRRD_EN;
1493 reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CMINUS1_OVRRD_EN;
1494 status = ixgbe_write_iosf_sb_reg_x550(hw,
1495 IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id),
1496 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
1497 return status;
1498 }
1499
1500 /**
1501 * ixgbe_restart_an_internal_phy_x550em - restart autonegotiation for the
1502 * internal PHY
1503 * @hw: pointer to hardware structure
1504 **/
ixgbe_restart_an_internal_phy_x550em(struct ixgbe_hw * hw)1505 static int ixgbe_restart_an_internal_phy_x550em(struct ixgbe_hw *hw)
1506 {
1507 u32 link_ctrl;
1508 int status;
1509
1510 /* Restart auto-negotiation. */
1511 status = hw->mac.ops.read_iosf_sb_reg(hw,
1512 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
1513 IXGBE_SB_IOSF_TARGET_KR_PHY, &link_ctrl);
1514
1515 if (status) {
1516 hw_dbg(hw, "Auto-negotiation did not complete\n");
1517 return status;
1518 }
1519
1520 link_ctrl |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
1521 status = hw->mac.ops.write_iosf_sb_reg(hw,
1522 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
1523 IXGBE_SB_IOSF_TARGET_KR_PHY, link_ctrl);
1524
1525 if (hw->mac.type == ixgbe_mac_x550em_a) {
1526 u32 flx_mask_st20;
1527
1528 /* Indicate to FW that AN restart has been asserted */
1529 status = hw->mac.ops.read_iosf_sb_reg(hw,
1530 IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
1531 IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_mask_st20);
1532
1533 if (status) {
1534 hw_dbg(hw, "Auto-negotiation did not complete\n");
1535 return status;
1536 }
1537
1538 flx_mask_st20 |= IXGBE_KRM_PMD_FLX_MASK_ST20_FW_AN_RESTART;
1539 status = hw->mac.ops.write_iosf_sb_reg(hw,
1540 IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
1541 IXGBE_SB_IOSF_TARGET_KR_PHY, flx_mask_st20);
1542 }
1543
1544 return status;
1545 }
1546
1547 /** ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode.
1548 * @hw: pointer to hardware structure
1549 * @speed: the link speed to force
1550 *
1551 * Configures the integrated KR PHY to use iXFI mode. Used to connect an
1552 * internal and external PHY at a specific speed, without autonegotiation.
1553 **/
ixgbe_setup_ixfi_x550em(struct ixgbe_hw * hw,ixgbe_link_speed * speed)1554 static int ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
1555 {
1556 struct ixgbe_mac_info *mac = &hw->mac;
1557 u32 reg_val;
1558 int status;
1559
1560 /* iXFI is only supported with X552 */
1561 if (mac->type != ixgbe_mac_X550EM_x)
1562 return -EIO;
1563
1564 /* Disable AN and force speed to 10G Serial. */
1565 status = ixgbe_read_iosf_sb_reg_x550(hw,
1566 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
1567 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
1568 if (status)
1569 return status;
1570
1571 reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
1572 reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK;
1573
1574 /* Select forced link speed for internal PHY. */
1575 switch (*speed) {
1576 case IXGBE_LINK_SPEED_10GB_FULL:
1577 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G;
1578 break;
1579 case IXGBE_LINK_SPEED_1GB_FULL:
1580 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G;
1581 break;
1582 default:
1583 /* Other link speeds are not supported by internal KR PHY. */
1584 return -EINVAL;
1585 }
1586
1587 status = ixgbe_write_iosf_sb_reg_x550(hw,
1588 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
1589 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
1590 if (status)
1591 return status;
1592
1593 /* Additional configuration needed for x550em_x */
1594 if (hw->mac.type == ixgbe_mac_X550EM_x) {
1595 status = ixgbe_setup_ixfi_x550em_x(hw);
1596 if (status)
1597 return status;
1598 }
1599
1600 /* Toggle port SW reset by AN reset. */
1601 status = ixgbe_restart_an_internal_phy_x550em(hw);
1602
1603 return status;
1604 }
1605
1606 /**
1607 * ixgbe_supported_sfp_modules_X550em - Check if SFP module type is supported
1608 * @hw: pointer to hardware structure
1609 * @linear: true if SFP module is linear
1610 */
ixgbe_supported_sfp_modules_X550em(struct ixgbe_hw * hw,bool * linear)1611 static int ixgbe_supported_sfp_modules_X550em(struct ixgbe_hw *hw, bool *linear)
1612 {
1613 switch (hw->phy.sfp_type) {
1614 case ixgbe_sfp_type_not_present:
1615 return -ENOENT;
1616 case ixgbe_sfp_type_da_cu_core0:
1617 case ixgbe_sfp_type_da_cu_core1:
1618 *linear = true;
1619 break;
1620 case ixgbe_sfp_type_srlr_core0:
1621 case ixgbe_sfp_type_srlr_core1:
1622 case ixgbe_sfp_type_da_act_lmt_core0:
1623 case ixgbe_sfp_type_da_act_lmt_core1:
1624 case ixgbe_sfp_type_1g_sx_core0:
1625 case ixgbe_sfp_type_1g_sx_core1:
1626 case ixgbe_sfp_type_1g_lx_core0:
1627 case ixgbe_sfp_type_1g_lx_core1:
1628 *linear = false;
1629 break;
1630 case ixgbe_sfp_type_unknown:
1631 case ixgbe_sfp_type_1g_cu_core0:
1632 case ixgbe_sfp_type_1g_cu_core1:
1633 default:
1634 return -EOPNOTSUPP;
1635 }
1636
1637 return 0;
1638 }
1639
1640 /**
1641 * ixgbe_setup_mac_link_sfp_x550em - Configure the KR PHY for SFP.
1642 * @hw: pointer to hardware structure
1643 * @speed: the link speed to force
1644 * @autoneg_wait_to_complete: unused
1645 *
1646 * Configures the extern PHY and the integrated KR PHY for SFP support.
1647 */
1648 static int
ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw * hw,ixgbe_link_speed speed,__always_unused bool autoneg_wait_to_complete)1649 ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
1650 ixgbe_link_speed speed,
1651 __always_unused bool autoneg_wait_to_complete)
1652 {
1653 bool setup_linear = false;
1654 u16 reg_slice, reg_val;
1655 int status;
1656
1657 /* Check if SFP module is supported and linear */
1658 status = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear);
1659
1660 /* If no SFP module present, then return success. Return success since
1661 * there is no reason to configure CS4227 and SFP not present error is
1662 * not accepted in the setup MAC link flow.
1663 */
1664 if (status == -ENOENT)
1665 return 0;
1666
1667 if (status)
1668 return status;
1669
1670 /* Configure internal PHY for KR/KX. */
1671 ixgbe_setup_kr_speed_x550em(hw, speed);
1672
1673 /* Configure CS4227 LINE side to proper mode. */
1674 reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + (hw->bus.lan_id << 12);
1675 if (setup_linear)
1676 reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1;
1677 else
1678 reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
1679
1680 status = hw->link.ops.write_link(hw, hw->link.addr, reg_slice,
1681 reg_val);
1682
1683 return status;
1684 }
1685
1686 /**
1687 * ixgbe_setup_sfi_x550a - Configure the internal PHY for native SFI mode
1688 * @hw: pointer to hardware structure
1689 * @speed: the link speed to force
1690 *
1691 * Configures the integrated PHY for native SFI mode. Used to connect the
1692 * internal PHY directly to an SFP cage, without autonegotiation.
1693 **/
ixgbe_setup_sfi_x550a(struct ixgbe_hw * hw,ixgbe_link_speed * speed)1694 static int ixgbe_setup_sfi_x550a(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
1695 {
1696 struct ixgbe_mac_info *mac = &hw->mac;
1697 u32 reg_val;
1698 int status;
1699
1700 /* Disable all AN and force speed to 10G Serial. */
1701 status = mac->ops.read_iosf_sb_reg(hw,
1702 IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
1703 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
1704 if (status)
1705 return status;
1706
1707 reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN;
1708 reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN;
1709 reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN;
1710 reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK;
1711
1712 /* Select forced link speed for internal PHY. */
1713 switch (*speed) {
1714 case IXGBE_LINK_SPEED_10GB_FULL:
1715 reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_10G;
1716 break;
1717 case IXGBE_LINK_SPEED_1GB_FULL:
1718 reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_1G;
1719 break;
1720 default:
1721 /* Other link speeds are not supported by internal PHY. */
1722 return -EINVAL;
1723 }
1724
1725 status = mac->ops.write_iosf_sb_reg(hw,
1726 IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
1727 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
1728
1729 /* Toggle port SW reset by AN reset. */
1730 status = ixgbe_restart_an_internal_phy_x550em(hw);
1731
1732 return status;
1733 }
1734
1735 /**
1736 * ixgbe_setup_mac_link_sfp_n - Setup internal PHY for native SFP
1737 * @hw: pointer to hardware structure
1738 * @speed: link speed
1739 * @autoneg_wait_to_complete: unused
1740 *
1741 * Configure the integrated PHY for native SFP support.
1742 */
1743 static int
ixgbe_setup_mac_link_sfp_n(struct ixgbe_hw * hw,ixgbe_link_speed speed,__always_unused bool autoneg_wait_to_complete)1744 ixgbe_setup_mac_link_sfp_n(struct ixgbe_hw *hw, ixgbe_link_speed speed,
1745 __always_unused bool autoneg_wait_to_complete)
1746 {
1747 bool setup_linear = false;
1748 u32 reg_phy_int;
1749 int ret_val;
1750
1751 /* Check if SFP module is supported and linear */
1752 ret_val = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear);
1753
1754 /* If no SFP module present, then return success. Return success since
1755 * SFP not present error is not excepted in the setup MAC link flow.
1756 */
1757 if (ret_val == -ENOENT)
1758 return 0;
1759
1760 if (ret_val)
1761 return ret_val;
1762
1763 /* Configure internal PHY for native SFI based on module type */
1764 ret_val = hw->mac.ops.read_iosf_sb_reg(hw,
1765 IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
1766 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_phy_int);
1767 if (ret_val)
1768 return ret_val;
1769
1770 reg_phy_int &= IXGBE_KRM_PMD_FLX_MASK_ST20_SFI_10G_DA;
1771 if (!setup_linear)
1772 reg_phy_int |= IXGBE_KRM_PMD_FLX_MASK_ST20_SFI_10G_SR;
1773
1774 ret_val = hw->mac.ops.write_iosf_sb_reg(hw,
1775 IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
1776 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_phy_int);
1777 if (ret_val)
1778 return ret_val;
1779
1780 /* Setup SFI internal link. */
1781 return ixgbe_setup_sfi_x550a(hw, &speed);
1782 }
1783
1784 /**
1785 * ixgbe_setup_mac_link_sfp_x550a - Setup internal PHY for SFP
1786 * @hw: pointer to hardware structure
1787 * @speed: link speed
1788 * @autoneg_wait_to_complete: unused
1789 *
1790 * Configure the integrated PHY for SFP support.
1791 */
1792 static int
ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw * hw,ixgbe_link_speed speed,__always_unused bool autoneg_wait_to_complete)1793 ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw, ixgbe_link_speed speed,
1794 __always_unused bool autoneg_wait_to_complete)
1795 {
1796 u32 reg_slice, slice_offset;
1797 bool setup_linear = false;
1798 u16 reg_phy_ext;
1799 int ret_val;
1800
1801 /* Check if SFP module is supported and linear */
1802 ret_val = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear);
1803
1804 /* If no SFP module present, then return success. Return success since
1805 * SFP not present error is not excepted in the setup MAC link flow.
1806 */
1807 if (ret_val == -ENOENT)
1808 return 0;
1809
1810 if (ret_val)
1811 return ret_val;
1812
1813 /* Configure internal PHY for KR/KX. */
1814 ixgbe_setup_kr_speed_x550em(hw, speed);
1815
1816 if (hw->phy.mdio.prtad == MDIO_PRTAD_NONE)
1817 return -EFAULT;
1818
1819 /* Get external PHY SKU id */
1820 ret_val = hw->phy.ops.read_reg(hw, IXGBE_CS4227_EFUSE_PDF_SKU,
1821 IXGBE_MDIO_ZERO_DEV_TYPE, ®_phy_ext);
1822 if (ret_val)
1823 return ret_val;
1824
1825 /* When configuring quad port CS4223, the MAC instance is part
1826 * of the slice offset.
1827 */
1828 if (reg_phy_ext == IXGBE_CS4223_SKU_ID)
1829 slice_offset = (hw->bus.lan_id +
1830 (hw->bus.instance_id << 1)) << 12;
1831 else
1832 slice_offset = hw->bus.lan_id << 12;
1833
1834 /* Configure CS4227/CS4223 LINE side to proper mode. */
1835 reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + slice_offset;
1836
1837 ret_val = hw->phy.ops.read_reg(hw, reg_slice,
1838 IXGBE_MDIO_ZERO_DEV_TYPE, ®_phy_ext);
1839 if (ret_val)
1840 return ret_val;
1841
1842 reg_phy_ext &= ~((IXGBE_CS4227_EDC_MODE_CX1 << 1) |
1843 (IXGBE_CS4227_EDC_MODE_SR << 1));
1844
1845 if (setup_linear)
1846 reg_phy_ext |= (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 1;
1847 else
1848 reg_phy_ext |= (IXGBE_CS4227_EDC_MODE_SR << 1) | 1;
1849
1850 ret_val = hw->phy.ops.write_reg(hw, reg_slice,
1851 IXGBE_MDIO_ZERO_DEV_TYPE, reg_phy_ext);
1852 if (ret_val)
1853 return ret_val;
1854
1855 /* Flush previous write with a read */
1856 return hw->phy.ops.read_reg(hw, reg_slice,
1857 IXGBE_MDIO_ZERO_DEV_TYPE, ®_phy_ext);
1858 }
1859
1860 /**
1861 * ixgbe_setup_mac_link_t_X550em - Sets the auto advertised link speed
1862 * @hw: pointer to hardware structure
1863 * @speed: new link speed
1864 * @autoneg_wait: true when waiting for completion is needed
1865 *
1866 * Setup internal/external PHY link speed based on link speed, then set
1867 * external PHY auto advertised link speed.
1868 *
1869 * Returns error status for any failure
1870 **/
ixgbe_setup_mac_link_t_X550em(struct ixgbe_hw * hw,ixgbe_link_speed speed,bool autoneg_wait)1871 static int ixgbe_setup_mac_link_t_X550em(struct ixgbe_hw *hw,
1872 ixgbe_link_speed speed,
1873 bool autoneg_wait)
1874 {
1875 ixgbe_link_speed force_speed;
1876 int status;
1877
1878 /* Setup internal/external PHY link speed to iXFI (10G), unless
1879 * only 1G is auto advertised then setup KX link.
1880 */
1881 if (speed & IXGBE_LINK_SPEED_10GB_FULL)
1882 force_speed = IXGBE_LINK_SPEED_10GB_FULL;
1883 else
1884 force_speed = IXGBE_LINK_SPEED_1GB_FULL;
1885
1886 /* If X552 and internal link mode is XFI, then setup XFI internal link.
1887 */
1888 if (hw->mac.type == ixgbe_mac_X550EM_x &&
1889 !(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
1890 status = ixgbe_setup_ixfi_x550em(hw, &force_speed);
1891
1892 if (status)
1893 return status;
1894 }
1895
1896 return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait);
1897 }
1898
1899 /** ixgbe_check_link_t_X550em - Determine link and speed status
1900 * @hw: pointer to hardware structure
1901 * @speed: pointer to link speed
1902 * @link_up: true when link is up
1903 * @link_up_wait_to_complete: bool used to wait for link up or not
1904 *
1905 * Check that both the MAC and X557 external PHY have link.
1906 **/
ixgbe_check_link_t_X550em(struct ixgbe_hw * hw,ixgbe_link_speed * speed,bool * link_up,bool link_up_wait_to_complete)1907 static int ixgbe_check_link_t_X550em(struct ixgbe_hw *hw,
1908 ixgbe_link_speed *speed,
1909 bool *link_up,
1910 bool link_up_wait_to_complete)
1911 {
1912 u32 status;
1913 u16 i, autoneg_status;
1914
1915 if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
1916 return -EIO;
1917
1918 status = ixgbe_check_mac_link_generic(hw, speed, link_up,
1919 link_up_wait_to_complete);
1920
1921 /* If check link fails or MAC link is not up, then return */
1922 if (status || !(*link_up))
1923 return status;
1924
1925 /* MAC link is up, so check external PHY link.
1926 * Link status is latching low, and can only be used to detect link
1927 * drop, and not the current status of the link without performing
1928 * back-to-back reads.
1929 */
1930 for (i = 0; i < 2; i++) {
1931 status = hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN,
1932 &autoneg_status);
1933
1934 if (status)
1935 return status;
1936 }
1937
1938 /* If external PHY link is not up, then indicate link not up */
1939 if (!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS))
1940 *link_up = false;
1941
1942 return 0;
1943 }
1944
1945 /**
1946 * ixgbe_setup_sgmii - Set up link for sgmii
1947 * @hw: pointer to hardware structure
1948 * @speed: unused
1949 * @autoneg_wait_to_complete: unused
1950 */
1951 static int
ixgbe_setup_sgmii(struct ixgbe_hw * hw,__always_unused ixgbe_link_speed speed,__always_unused bool autoneg_wait_to_complete)1952 ixgbe_setup_sgmii(struct ixgbe_hw *hw, __always_unused ixgbe_link_speed speed,
1953 __always_unused bool autoneg_wait_to_complete)
1954 {
1955 struct ixgbe_mac_info *mac = &hw->mac;
1956 u32 lval, sval, flx_val;
1957 int rc;
1958
1959 rc = mac->ops.read_iosf_sb_reg(hw,
1960 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
1961 IXGBE_SB_IOSF_TARGET_KR_PHY, &lval);
1962 if (rc)
1963 return rc;
1964
1965 lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
1966 lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK;
1967 lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_SGMII_EN;
1968 lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CLAUSE_37_EN;
1969 lval |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G;
1970 rc = mac->ops.write_iosf_sb_reg(hw,
1971 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
1972 IXGBE_SB_IOSF_TARGET_KR_PHY, lval);
1973 if (rc)
1974 return rc;
1975
1976 rc = mac->ops.read_iosf_sb_reg(hw,
1977 IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id),
1978 IXGBE_SB_IOSF_TARGET_KR_PHY, &sval);
1979 if (rc)
1980 return rc;
1981
1982 sval |= IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_10_D;
1983 sval |= IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_100_D;
1984 rc = mac->ops.write_iosf_sb_reg(hw,
1985 IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id),
1986 IXGBE_SB_IOSF_TARGET_KR_PHY, sval);
1987 if (rc)
1988 return rc;
1989
1990 rc = mac->ops.read_iosf_sb_reg(hw,
1991 IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
1992 IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_val);
1993 if (rc)
1994 return rc;
1995
1996 rc = mac->ops.read_iosf_sb_reg(hw,
1997 IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
1998 IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_val);
1999 if (rc)
2000 return rc;
2001
2002 flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK;
2003 flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_1G;
2004 flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN;
2005 flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN;
2006 flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN;
2007
2008 rc = mac->ops.write_iosf_sb_reg(hw,
2009 IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
2010 IXGBE_SB_IOSF_TARGET_KR_PHY, flx_val);
2011 if (rc)
2012 return rc;
2013
2014 rc = ixgbe_restart_an_internal_phy_x550em(hw);
2015 return rc;
2016 }
2017
2018 /**
2019 * ixgbe_setup_sgmii_fw - Set up link for sgmii with firmware-controlled PHYs
2020 * @hw: pointer to hardware structure
2021 * @speed: the link speed to force
2022 * @autoneg_wait: true when waiting for completion is needed
2023 */
ixgbe_setup_sgmii_fw(struct ixgbe_hw * hw,ixgbe_link_speed speed,bool autoneg_wait)2024 static int ixgbe_setup_sgmii_fw(struct ixgbe_hw *hw, ixgbe_link_speed speed,
2025 bool autoneg_wait)
2026 {
2027 struct ixgbe_mac_info *mac = &hw->mac;
2028 u32 lval, sval, flx_val;
2029 int rc;
2030
2031 rc = mac->ops.read_iosf_sb_reg(hw,
2032 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
2033 IXGBE_SB_IOSF_TARGET_KR_PHY, &lval);
2034 if (rc)
2035 return rc;
2036
2037 lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
2038 lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK;
2039 lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_SGMII_EN;
2040 lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CLAUSE_37_EN;
2041 lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G;
2042 rc = mac->ops.write_iosf_sb_reg(hw,
2043 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
2044 IXGBE_SB_IOSF_TARGET_KR_PHY, lval);
2045 if (rc)
2046 return rc;
2047
2048 rc = mac->ops.read_iosf_sb_reg(hw,
2049 IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id),
2050 IXGBE_SB_IOSF_TARGET_KR_PHY, &sval);
2051 if (rc)
2052 return rc;
2053
2054 sval &= ~IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_10_D;
2055 sval &= ~IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_100_D;
2056 rc = mac->ops.write_iosf_sb_reg(hw,
2057 IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id),
2058 IXGBE_SB_IOSF_TARGET_KR_PHY, sval);
2059 if (rc)
2060 return rc;
2061
2062 rc = mac->ops.write_iosf_sb_reg(hw,
2063 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
2064 IXGBE_SB_IOSF_TARGET_KR_PHY, lval);
2065 if (rc)
2066 return rc;
2067
2068 rc = mac->ops.read_iosf_sb_reg(hw,
2069 IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
2070 IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_val);
2071 if (rc)
2072 return rc;
2073
2074 flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK;
2075 flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_AN;
2076 flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN;
2077 flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN;
2078 flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN;
2079
2080 rc = mac->ops.write_iosf_sb_reg(hw,
2081 IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
2082 IXGBE_SB_IOSF_TARGET_KR_PHY, flx_val);
2083 if (rc)
2084 return rc;
2085
2086 ixgbe_restart_an_internal_phy_x550em(hw);
2087
2088 return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait);
2089 }
2090
2091 /**
2092 * ixgbe_fc_autoneg_sgmii_x550em_a - Enable flow control IEEE clause 37
2093 * @hw: pointer to hardware structure
2094 *
2095 * Enable flow control according to IEEE clause 37.
2096 */
ixgbe_fc_autoneg_sgmii_x550em_a(struct ixgbe_hw * hw)2097 static void ixgbe_fc_autoneg_sgmii_x550em_a(struct ixgbe_hw *hw)
2098 {
2099 u32 info[FW_PHY_ACT_DATA_COUNT] = { 0 };
2100 ixgbe_link_speed speed;
2101 int status = -EIO;
2102 bool link_up;
2103
2104 /* AN should have completed when the cable was plugged in.
2105 * Look for reasons to bail out. Bail out if:
2106 * - FC autoneg is disabled, or if
2107 * - link is not up.
2108 */
2109 if (hw->fc.disable_fc_autoneg)
2110 goto out;
2111
2112 hw->mac.ops.check_link(hw, &speed, &link_up, false);
2113 if (!link_up)
2114 goto out;
2115
2116 /* Check if auto-negotiation has completed */
2117 status = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_LINK_INFO, &info);
2118 if (status || !(info[0] & FW_PHY_ACT_GET_LINK_INFO_AN_COMPLETE)) {
2119 status = -EIO;
2120 goto out;
2121 }
2122
2123 /* Negotiate the flow control */
2124 status = ixgbe_negotiate_fc(hw, info[0], info[0],
2125 FW_PHY_ACT_GET_LINK_INFO_FC_RX,
2126 FW_PHY_ACT_GET_LINK_INFO_FC_TX,
2127 FW_PHY_ACT_GET_LINK_INFO_LP_FC_RX,
2128 FW_PHY_ACT_GET_LINK_INFO_LP_FC_TX);
2129
2130 out:
2131 if (!status) {
2132 hw->fc.fc_was_autonegged = true;
2133 } else {
2134 hw->fc.fc_was_autonegged = false;
2135 hw->fc.current_mode = hw->fc.requested_mode;
2136 }
2137 }
2138
2139 /** ixgbe_init_mac_link_ops_X550em_a - Init mac link function pointers
2140 * @hw: pointer to hardware structure
2141 **/
ixgbe_init_mac_link_ops_X550em_a(struct ixgbe_hw * hw)2142 static void ixgbe_init_mac_link_ops_X550em_a(struct ixgbe_hw *hw)
2143 {
2144 struct ixgbe_mac_info *mac = &hw->mac;
2145
2146 switch (mac->ops.get_media_type(hw)) {
2147 case ixgbe_media_type_fiber:
2148 mac->ops.setup_fc = NULL;
2149 mac->ops.fc_autoneg = ixgbe_fc_autoneg_fiber_x550em_a;
2150 break;
2151 case ixgbe_media_type_copper:
2152 if (hw->device_id != IXGBE_DEV_ID_X550EM_A_1G_T &&
2153 hw->device_id != IXGBE_DEV_ID_X550EM_A_1G_T_L) {
2154 mac->ops.setup_link = ixgbe_setup_mac_link_t_X550em;
2155 break;
2156 }
2157 mac->ops.fc_autoneg = ixgbe_fc_autoneg_sgmii_x550em_a;
2158 mac->ops.setup_fc = ixgbe_fc_autoneg_fw;
2159 mac->ops.setup_link = ixgbe_setup_sgmii_fw;
2160 mac->ops.check_link = ixgbe_check_mac_link_generic;
2161 break;
2162 case ixgbe_media_type_backplane:
2163 mac->ops.fc_autoneg = ixgbe_fc_autoneg_backplane_x550em_a;
2164 mac->ops.setup_fc = ixgbe_setup_fc_backplane_x550em_a;
2165 break;
2166 default:
2167 break;
2168 }
2169 }
2170
2171 /** ixgbe_init_mac_link_ops_X550em - init mac link function pointers
2172 * @hw: pointer to hardware structure
2173 **/
ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw * hw)2174 static void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw)
2175 {
2176 struct ixgbe_mac_info *mac = &hw->mac;
2177
2178 mac->ops.setup_fc = ixgbe_setup_fc_x550em;
2179
2180 switch (mac->ops.get_media_type(hw)) {
2181 case ixgbe_media_type_fiber:
2182 /* CS4227 does not support autoneg, so disable the laser control
2183 * functions for SFP+ fiber
2184 */
2185 mac->ops.disable_tx_laser = NULL;
2186 mac->ops.enable_tx_laser = NULL;
2187 mac->ops.flap_tx_laser = NULL;
2188 mac->ops.setup_link = ixgbe_setup_mac_link_multispeed_fiber;
2189 switch (hw->device_id) {
2190 case IXGBE_DEV_ID_X550EM_A_SFP_N:
2191 mac->ops.setup_mac_link = ixgbe_setup_mac_link_sfp_n;
2192 break;
2193 case IXGBE_DEV_ID_X550EM_A_SFP:
2194 mac->ops.setup_mac_link =
2195 ixgbe_setup_mac_link_sfp_x550a;
2196 break;
2197 default:
2198 mac->ops.setup_mac_link =
2199 ixgbe_setup_mac_link_sfp_x550em;
2200 break;
2201 }
2202 mac->ops.set_rate_select_speed =
2203 ixgbe_set_soft_rate_select_speed;
2204 break;
2205 case ixgbe_media_type_copper:
2206 if (hw->device_id == IXGBE_DEV_ID_X550EM_X_1G_T)
2207 break;
2208 mac->ops.setup_link = ixgbe_setup_mac_link_t_X550em;
2209 mac->ops.setup_fc = ixgbe_setup_fc_generic;
2210 mac->ops.check_link = ixgbe_check_link_t_X550em;
2211 break;
2212 case ixgbe_media_type_backplane:
2213 if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII ||
2214 hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII_L)
2215 mac->ops.setup_link = ixgbe_setup_sgmii;
2216 break;
2217 default:
2218 break;
2219 }
2220
2221 /* Additional modification for X550em_a devices */
2222 if (hw->mac.type == ixgbe_mac_x550em_a)
2223 ixgbe_init_mac_link_ops_X550em_a(hw);
2224 }
2225
2226 /** ixgbe_setup_sfp_modules_X550em - Setup SFP module
2227 * @hw: pointer to hardware structure
2228 */
ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw * hw)2229 static int ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw)
2230 {
2231 bool linear;
2232 int status;
2233
2234 /* Check if SFP module is supported */
2235 status = ixgbe_supported_sfp_modules_X550em(hw, &linear);
2236 if (status)
2237 return status;
2238
2239 ixgbe_init_mac_link_ops_X550em(hw);
2240 hw->phy.ops.reset = NULL;
2241
2242 return 0;
2243 }
2244
2245 /** ixgbe_get_link_capabilities_x550em - Determines link capabilities
2246 * @hw: pointer to hardware structure
2247 * @speed: pointer to link speed
2248 * @autoneg: true when autoneg or autotry is enabled
2249 **/
ixgbe_get_link_capabilities_X550em(struct ixgbe_hw * hw,ixgbe_link_speed * speed,bool * autoneg)2250 static int ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw,
2251 ixgbe_link_speed *speed,
2252 bool *autoneg)
2253 {
2254 if (hw->phy.type == ixgbe_phy_fw) {
2255 *autoneg = true;
2256 *speed = hw->phy.speeds_supported;
2257 return 0;
2258 }
2259
2260 /* SFP */
2261 if (hw->phy.media_type == ixgbe_media_type_fiber) {
2262 /* CS4227 SFP must not enable auto-negotiation */
2263 *autoneg = false;
2264
2265 if (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
2266 hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1 ||
2267 hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
2268 hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1) {
2269 *speed = IXGBE_LINK_SPEED_1GB_FULL;
2270 return 0;
2271 }
2272
2273 /* Link capabilities are based on SFP */
2274 if (hw->phy.multispeed_fiber)
2275 *speed = IXGBE_LINK_SPEED_10GB_FULL |
2276 IXGBE_LINK_SPEED_1GB_FULL;
2277 else
2278 *speed = IXGBE_LINK_SPEED_10GB_FULL;
2279 } else {
2280 switch (hw->phy.type) {
2281 case ixgbe_phy_x550em_kx4:
2282 *speed = IXGBE_LINK_SPEED_1GB_FULL |
2283 IXGBE_LINK_SPEED_2_5GB_FULL |
2284 IXGBE_LINK_SPEED_10GB_FULL;
2285 break;
2286 case ixgbe_phy_x550em_xfi:
2287 *speed = IXGBE_LINK_SPEED_1GB_FULL |
2288 IXGBE_LINK_SPEED_10GB_FULL;
2289 break;
2290 case ixgbe_phy_ext_1g_t:
2291 case ixgbe_phy_sgmii:
2292 *speed = IXGBE_LINK_SPEED_1GB_FULL;
2293 break;
2294 case ixgbe_phy_x550em_kr:
2295 if (hw->mac.type == ixgbe_mac_x550em_a) {
2296 /* check different backplane modes */
2297 if (hw->phy.nw_mng_if_sel &
2298 IXGBE_NW_MNG_IF_SEL_PHY_SPEED_2_5G) {
2299 *speed = IXGBE_LINK_SPEED_2_5GB_FULL;
2300 break;
2301 } else if (hw->device_id ==
2302 IXGBE_DEV_ID_X550EM_A_KR_L) {
2303 *speed = IXGBE_LINK_SPEED_1GB_FULL;
2304 break;
2305 }
2306 }
2307 fallthrough;
2308 default:
2309 *speed = IXGBE_LINK_SPEED_10GB_FULL |
2310 IXGBE_LINK_SPEED_1GB_FULL;
2311 break;
2312 }
2313 *autoneg = true;
2314 }
2315 return 0;
2316 }
2317
2318 /**
2319 * ixgbe_get_lasi_ext_t_x550em - Determime external Base T PHY interrupt cause
2320 * @hw: pointer to hardware structure
2321 * @lsc: pointer to boolean flag which indicates whether external Base T
2322 * PHY interrupt is lsc
2323 * @is_overtemp: indicate whether an overtemp event encountered
2324 *
2325 * Determime if external Base T PHY interrupt cause is high temperature
2326 * failure alarm or link status change.
2327 **/
ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw * hw,bool * lsc,bool * is_overtemp)2328 static int ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc,
2329 bool *is_overtemp)
2330 {
2331 u32 status;
2332 u16 reg;
2333
2334 *is_overtemp = false;
2335 *lsc = false;
2336
2337 /* Vendor alarm triggered */
2338 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG,
2339 MDIO_MMD_VEND1,
2340 ®);
2341
2342 if (status || !(reg & IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN))
2343 return status;
2344
2345 /* Vendor Auto-Neg alarm triggered or Global alarm 1 triggered */
2346 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_FLAG,
2347 MDIO_MMD_VEND1,
2348 ®);
2349
2350 if (status || !(reg & (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN |
2351 IXGBE_MDIO_GLOBAL_ALARM_1_INT)))
2352 return status;
2353
2354 /* Global alarm triggered */
2355 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_ALARM_1,
2356 MDIO_MMD_VEND1,
2357 ®);
2358
2359 if (status)
2360 return status;
2361
2362 /* If high temperature failure, then return over temp error and exit */
2363 if (reg & IXGBE_MDIO_GLOBAL_ALM_1_HI_TMP_FAIL) {
2364 /* power down the PHY in case the PHY FW didn't already */
2365 ixgbe_set_copper_phy_power(hw, false);
2366 *is_overtemp = true;
2367 return -EIO;
2368 }
2369 if (reg & IXGBE_MDIO_GLOBAL_ALM_1_DEV_FAULT) {
2370 /* device fault alarm triggered */
2371 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_FAULT_MSG,
2372 MDIO_MMD_VEND1,
2373 ®);
2374 if (status)
2375 return status;
2376
2377 /* if device fault was due to high temp alarm handle and exit */
2378 if (reg == IXGBE_MDIO_GLOBAL_FAULT_MSG_HI_TMP) {
2379 /* power down the PHY in case the PHY FW didn't */
2380 ixgbe_set_copper_phy_power(hw, false);
2381 *is_overtemp = true;
2382 return -EIO;
2383 }
2384 }
2385
2386 /* Vendor alarm 2 triggered */
2387 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG,
2388 MDIO_MMD_AN, ®);
2389
2390 if (status || !(reg & IXGBE_MDIO_GLOBAL_STD_ALM2_INT))
2391 return status;
2392
2393 /* link connect/disconnect event occurred */
2394 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM2,
2395 MDIO_MMD_AN, ®);
2396
2397 if (status)
2398 return status;
2399
2400 /* Indicate LSC */
2401 if (reg & IXGBE_MDIO_AUTO_NEG_VEN_LSC)
2402 *lsc = true;
2403
2404 return 0;
2405 }
2406
2407 /**
2408 * ixgbe_enable_lasi_ext_t_x550em - Enable external Base T PHY interrupts
2409 * @hw: pointer to hardware structure
2410 *
2411 * Enable link status change and temperature failure alarm for the external
2412 * Base T PHY
2413 *
2414 * Returns PHY access status
2415 **/
ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw * hw)2416 static int ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw)
2417 {
2418 bool lsc, overtemp;
2419 u32 status;
2420 u16 reg;
2421
2422 /* Clear interrupt flags */
2423 status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc, &overtemp);
2424
2425 /* Enable link status change alarm */
2426
2427 /* Enable the LASI interrupts on X552 devices to receive notifications
2428 * of the link configurations of the external PHY and correspondingly
2429 * support the configuration of the internal iXFI link, since iXFI does
2430 * not support auto-negotiation. This is not required for X553 devices
2431 * having KR support, which performs auto-negotiations and which is used
2432 * as the internal link to the external PHY. Hence adding a check here
2433 * to avoid enabling LASI interrupts for X553 devices.
2434 */
2435 if (hw->mac.type != ixgbe_mac_x550em_a) {
2436 status = hw->phy.ops.read_reg(hw,
2437 IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK,
2438 MDIO_MMD_AN, ®);
2439 if (status)
2440 return status;
2441
2442 reg |= IXGBE_MDIO_PMA_TX_VEN_LASI_INT_EN;
2443
2444 status = hw->phy.ops.write_reg(hw,
2445 IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK,
2446 MDIO_MMD_AN, reg);
2447 if (status)
2448 return status;
2449 }
2450
2451 /* Enable high temperature failure and global fault alarms */
2452 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK,
2453 MDIO_MMD_VEND1,
2454 ®);
2455 if (status)
2456 return status;
2457
2458 reg |= (IXGBE_MDIO_GLOBAL_INT_HI_TEMP_EN |
2459 IXGBE_MDIO_GLOBAL_INT_DEV_FAULT_EN);
2460
2461 status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK,
2462 MDIO_MMD_VEND1,
2463 reg);
2464 if (status)
2465 return status;
2466
2467 /* Enable vendor Auto-Neg alarm and Global Interrupt Mask 1 alarm */
2468 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK,
2469 MDIO_MMD_VEND1,
2470 ®);
2471 if (status)
2472 return status;
2473
2474 reg |= (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN |
2475 IXGBE_MDIO_GLOBAL_ALARM_1_INT);
2476
2477 status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK,
2478 MDIO_MMD_VEND1,
2479 reg);
2480 if (status)
2481 return status;
2482
2483 /* Enable chip-wide vendor alarm */
2484 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK,
2485 MDIO_MMD_VEND1,
2486 ®);
2487 if (status)
2488 return status;
2489
2490 reg |= IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN;
2491
2492 status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK,
2493 MDIO_MMD_VEND1,
2494 reg);
2495
2496 return status;
2497 }
2498
2499 /**
2500 * ixgbe_handle_lasi_ext_t_x550em - Handle external Base T PHY interrupt
2501 * @hw: pointer to hardware structure
2502 * @is_overtemp: indicate whether an overtemp event encountered
2503 *
2504 * Handle external Base T PHY interrupt. If high temperature
2505 * failure alarm then return error, else if link status change
2506 * then setup internal/external PHY link
2507 **/
ixgbe_handle_lasi_ext_t_x550em(struct ixgbe_hw * hw,bool * is_overtemp)2508 static int ixgbe_handle_lasi_ext_t_x550em(struct ixgbe_hw *hw,
2509 bool *is_overtemp)
2510 {
2511 struct ixgbe_phy_info *phy = &hw->phy;
2512 bool lsc;
2513 u32 status;
2514
2515 status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc, is_overtemp);
2516 if (status)
2517 return status;
2518
2519 if (lsc && phy->ops.setup_internal_link)
2520 return phy->ops.setup_internal_link(hw);
2521
2522 return 0;
2523 }
2524
2525 /**
2526 * ixgbe_setup_kr_speed_x550em - Configure the KR PHY for link speed.
2527 * @hw: pointer to hardware structure
2528 * @speed: link speed
2529 *
2530 * Configures the integrated KR PHY.
2531 **/
ixgbe_setup_kr_speed_x550em(struct ixgbe_hw * hw,ixgbe_link_speed speed)2532 static int ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *hw,
2533 ixgbe_link_speed speed)
2534 {
2535 u32 reg_val;
2536 int status;
2537
2538 status = hw->mac.ops.read_iosf_sb_reg(hw,
2539 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
2540 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
2541 if (status)
2542 return status;
2543
2544 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
2545 reg_val &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR |
2546 IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX);
2547
2548 /* Advertise 10G support. */
2549 if (speed & IXGBE_LINK_SPEED_10GB_FULL)
2550 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR;
2551
2552 /* Advertise 1G support. */
2553 if (speed & IXGBE_LINK_SPEED_1GB_FULL)
2554 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX;
2555
2556 status = hw->mac.ops.write_iosf_sb_reg(hw,
2557 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
2558 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
2559
2560 if (hw->mac.type == ixgbe_mac_x550em_a) {
2561 /* Set lane mode to KR auto negotiation */
2562 status = hw->mac.ops.read_iosf_sb_reg(hw,
2563 IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
2564 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
2565
2566 if (status)
2567 return status;
2568
2569 reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK;
2570 reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_AN;
2571 reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN;
2572 reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN;
2573 reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN;
2574
2575 status = hw->mac.ops.write_iosf_sb_reg(hw,
2576 IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
2577 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
2578 }
2579
2580 return ixgbe_restart_an_internal_phy_x550em(hw);
2581 }
2582
2583 /**
2584 * ixgbe_setup_kr_x550em - Configure the KR PHY
2585 * @hw: pointer to hardware structure
2586 **/
ixgbe_setup_kr_x550em(struct ixgbe_hw * hw)2587 static int ixgbe_setup_kr_x550em(struct ixgbe_hw *hw)
2588 {
2589 /* leave link alone for 2.5G */
2590 if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_2_5GB_FULL)
2591 return 0;
2592
2593 if (ixgbe_check_reset_blocked(hw))
2594 return 0;
2595
2596 return ixgbe_setup_kr_speed_x550em(hw, hw->phy.autoneg_advertised);
2597 }
2598
2599 /** ixgbe_ext_phy_t_x550em_get_link - Get ext phy link status
2600 * @hw: address of hardware structure
2601 * @link_up: address of boolean to indicate link status
2602 *
2603 * Returns error code if unable to get link status.
2604 **/
ixgbe_ext_phy_t_x550em_get_link(struct ixgbe_hw * hw,bool * link_up)2605 static int ixgbe_ext_phy_t_x550em_get_link(struct ixgbe_hw *hw, bool *link_up)
2606 {
2607 u32 ret;
2608 u16 autoneg_status;
2609
2610 *link_up = false;
2611
2612 /* read this twice back to back to indicate current status */
2613 ret = hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN,
2614 &autoneg_status);
2615 if (ret)
2616 return ret;
2617
2618 ret = hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN,
2619 &autoneg_status);
2620 if (ret)
2621 return ret;
2622
2623 *link_up = !!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS);
2624
2625 return 0;
2626 }
2627
2628 /** ixgbe_setup_internal_phy_t_x550em - Configure KR PHY to X557 link
2629 * @hw: point to hardware structure
2630 *
2631 * Configures the link between the integrated KR PHY and the external X557 PHY
2632 * The driver will call this function when it gets a link status change
2633 * interrupt from the X557 PHY. This function configures the link speed
2634 * between the PHYs to match the link speed of the BASE-T link.
2635 *
2636 * A return of a non-zero value indicates an error, and the base driver should
2637 * not report link up.
2638 **/
ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw * hw)2639 static int ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw)
2640 {
2641 ixgbe_link_speed force_speed;
2642 bool link_up;
2643 u32 status;
2644 u16 speed;
2645
2646 if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
2647 return -EIO;
2648
2649 if (!(hw->mac.type == ixgbe_mac_X550EM_x &&
2650 !(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE))) {
2651 speed = IXGBE_LINK_SPEED_10GB_FULL |
2652 IXGBE_LINK_SPEED_1GB_FULL;
2653 return ixgbe_setup_kr_speed_x550em(hw, speed);
2654 }
2655
2656 /* If link is not up, then there is no setup necessary so return */
2657 status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
2658 if (status)
2659 return status;
2660
2661 if (!link_up)
2662 return 0;
2663
2664 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT,
2665 MDIO_MMD_AN,
2666 &speed);
2667 if (status)
2668 return status;
2669
2670 /* If link is not still up, then no setup is necessary so return */
2671 status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
2672 if (status)
2673 return status;
2674
2675 if (!link_up)
2676 return 0;
2677
2678 /* clear everything but the speed and duplex bits */
2679 speed &= IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK;
2680
2681 switch (speed) {
2682 case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL:
2683 force_speed = IXGBE_LINK_SPEED_10GB_FULL;
2684 break;
2685 case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL:
2686 force_speed = IXGBE_LINK_SPEED_1GB_FULL;
2687 break;
2688 default:
2689 /* Internal PHY does not support anything else */
2690 return -EINVAL;
2691 }
2692
2693 return ixgbe_setup_ixfi_x550em(hw, &force_speed);
2694 }
2695
2696 /** ixgbe_reset_phy_t_X550em - Performs X557 PHY reset and enables LASI
2697 * @hw: pointer to hardware structure
2698 **/
ixgbe_reset_phy_t_X550em(struct ixgbe_hw * hw)2699 static int ixgbe_reset_phy_t_X550em(struct ixgbe_hw *hw)
2700 {
2701 int status;
2702
2703 status = ixgbe_reset_phy_generic(hw);
2704
2705 if (status)
2706 return status;
2707
2708 /* Configure Link Status Alarm and Temperature Threshold interrupts */
2709 return ixgbe_enable_lasi_ext_t_x550em(hw);
2710 }
2711
2712 /**
2713 * ixgbe_led_on_t_x550em - Turns on the software controllable LEDs.
2714 * @hw: pointer to hardware structure
2715 * @led_idx: led number to turn on
2716 **/
ixgbe_led_on_t_x550em(struct ixgbe_hw * hw,u32 led_idx)2717 static int ixgbe_led_on_t_x550em(struct ixgbe_hw *hw, u32 led_idx)
2718 {
2719 u16 phy_data;
2720
2721 if (led_idx >= IXGBE_X557_MAX_LED_INDEX)
2722 return -EINVAL;
2723
2724 /* To turn on the LED, set mode to ON. */
2725 hw->phy.ops.read_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
2726 MDIO_MMD_VEND1, &phy_data);
2727 phy_data |= IXGBE_X557_LED_MANUAL_SET_MASK;
2728 hw->phy.ops.write_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
2729 MDIO_MMD_VEND1, phy_data);
2730
2731 return 0;
2732 }
2733
2734 /**
2735 * ixgbe_led_off_t_x550em - Turns off the software controllable LEDs.
2736 * @hw: pointer to hardware structure
2737 * @led_idx: led number to turn off
2738 **/
ixgbe_led_off_t_x550em(struct ixgbe_hw * hw,u32 led_idx)2739 static int ixgbe_led_off_t_x550em(struct ixgbe_hw *hw, u32 led_idx)
2740 {
2741 u16 phy_data;
2742
2743 if (led_idx >= IXGBE_X557_MAX_LED_INDEX)
2744 return -EINVAL;
2745
2746 /* To turn on the LED, set mode to ON. */
2747 hw->phy.ops.read_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
2748 MDIO_MMD_VEND1, &phy_data);
2749 phy_data &= ~IXGBE_X557_LED_MANUAL_SET_MASK;
2750 hw->phy.ops.write_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
2751 MDIO_MMD_VEND1, phy_data);
2752
2753 return 0;
2754 }
2755
2756 /**
2757 * ixgbe_set_fw_drv_ver_x550 - Sends driver version to firmware
2758 * @hw: pointer to the HW structure
2759 * @maj: driver version major number
2760 * @min: driver version minor number
2761 * @build: driver version build number
2762 * @sub: driver version sub build number
2763 * @len: length of driver_ver string
2764 * @driver_ver: driver string
2765 *
2766 * Sends driver version number to firmware through the manageability
2767 * block. On success return 0
2768 * else returns -EBUSY when encountering an error acquiring
2769 * semaphore, -EIO when command fails or -ENIVAL when incorrect
2770 * params passed.
2771 **/
ixgbe_set_fw_drv_ver_x550(struct ixgbe_hw * hw,u8 maj,u8 min,u8 build,u8 sub,u16 len,const char * driver_ver)2772 static int ixgbe_set_fw_drv_ver_x550(struct ixgbe_hw *hw, u8 maj, u8 min,
2773 u8 build, u8 sub, u16 len,
2774 const char *driver_ver)
2775 {
2776 struct ixgbe_hic_drv_info2 fw_cmd;
2777 int ret_val;
2778 int i;
2779
2780 if (!len || !driver_ver || (len > sizeof(fw_cmd.driver_string)))
2781 return -EINVAL;
2782
2783 fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO;
2784 fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN + len;
2785 fw_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED;
2786 fw_cmd.port_num = (u8)hw->bus.func;
2787 fw_cmd.ver_maj = maj;
2788 fw_cmd.ver_min = min;
2789 fw_cmd.ver_build = build;
2790 fw_cmd.ver_sub = sub;
2791 fw_cmd.hdr.checksum = 0;
2792 memcpy(fw_cmd.driver_string, driver_ver, len);
2793 fw_cmd.hdr.checksum = ixgbe_calculate_checksum((u8 *)&fw_cmd,
2794 (FW_CEM_HDR_LEN + fw_cmd.hdr.buf_len));
2795
2796 for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) {
2797 ret_val = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd,
2798 sizeof(fw_cmd),
2799 IXGBE_HI_COMMAND_TIMEOUT,
2800 true);
2801 if (ret_val)
2802 continue;
2803
2804 if (fw_cmd.hdr.cmd_or_resp.ret_status !=
2805 FW_CEM_RESP_STATUS_SUCCESS)
2806 return -EIO;
2807 return 0;
2808 }
2809
2810 return ret_val;
2811 }
2812
2813 /** ixgbe_get_lcd_x550em - Determine lowest common denominator
2814 * @hw: pointer to hardware structure
2815 * @lcd_speed: pointer to lowest common link speed
2816 *
2817 * Determine lowest common link speed with link partner.
2818 **/
ixgbe_get_lcd_t_x550em(struct ixgbe_hw * hw,ixgbe_link_speed * lcd_speed)2819 static int ixgbe_get_lcd_t_x550em(struct ixgbe_hw *hw,
2820 ixgbe_link_speed *lcd_speed)
2821 {
2822 u16 word = hw->eeprom.ctrl_word_3;
2823 u16 an_lp_status;
2824 int status;
2825
2826 *lcd_speed = IXGBE_LINK_SPEED_UNKNOWN;
2827
2828 status = hw->phy.ops.read_reg(hw, IXGBE_AUTO_NEG_LP_STATUS,
2829 MDIO_MMD_AN,
2830 &an_lp_status);
2831 if (status)
2832 return status;
2833
2834 /* If link partner advertised 1G, return 1G */
2835 if (an_lp_status & IXGBE_AUTO_NEG_LP_1000BASE_CAP) {
2836 *lcd_speed = IXGBE_LINK_SPEED_1GB_FULL;
2837 return 0;
2838 }
2839
2840 /* If 10G disabled for LPLU via NVM D10GMP, then return no valid LCD */
2841 if ((hw->bus.lan_id && (word & NVM_INIT_CTRL_3_D10GMP_PORT1)) ||
2842 (word & NVM_INIT_CTRL_3_D10GMP_PORT0))
2843 return 0;
2844
2845 /* Link partner not capable of lower speeds, return 10G */
2846 *lcd_speed = IXGBE_LINK_SPEED_10GB_FULL;
2847 return 0;
2848 }
2849
2850 /**
2851 * ixgbe_setup_fc_x550em - Set up flow control
2852 * @hw: pointer to hardware structure
2853 */
ixgbe_setup_fc_x550em(struct ixgbe_hw * hw)2854 static int ixgbe_setup_fc_x550em(struct ixgbe_hw *hw)
2855 {
2856 bool pause, asm_dir;
2857 u32 reg_val;
2858 int rc = 0;
2859
2860 /* Validate the requested mode */
2861 if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
2862 hw_err(hw, "ixgbe_fc_rx_pause not valid in strict IEEE mode\n");
2863 return -EINVAL;
2864 }
2865
2866 /* 10gig parts do not have a word in the EEPROM to determine the
2867 * default flow control setting, so we explicitly set it to full.
2868 */
2869 if (hw->fc.requested_mode == ixgbe_fc_default)
2870 hw->fc.requested_mode = ixgbe_fc_full;
2871
2872 /* Determine PAUSE and ASM_DIR bits. */
2873 switch (hw->fc.requested_mode) {
2874 case ixgbe_fc_none:
2875 pause = false;
2876 asm_dir = false;
2877 break;
2878 case ixgbe_fc_tx_pause:
2879 pause = false;
2880 asm_dir = true;
2881 break;
2882 case ixgbe_fc_rx_pause:
2883 /* Rx Flow control is enabled and Tx Flow control is
2884 * disabled by software override. Since there really
2885 * isn't a way to advertise that we are capable of RX
2886 * Pause ONLY, we will advertise that we support both
2887 * symmetric and asymmetric Rx PAUSE, as such we fall
2888 * through to the fc_full statement. Later, we will
2889 * disable the adapter's ability to send PAUSE frames.
2890 */
2891 fallthrough;
2892 case ixgbe_fc_full:
2893 pause = true;
2894 asm_dir = true;
2895 break;
2896 default:
2897 hw_err(hw, "Flow control param set incorrectly\n");
2898 return -EIO;
2899 }
2900
2901 switch (hw->device_id) {
2902 case IXGBE_DEV_ID_X550EM_X_KR:
2903 case IXGBE_DEV_ID_X550EM_A_KR:
2904 case IXGBE_DEV_ID_X550EM_A_KR_L:
2905 rc = hw->mac.ops.read_iosf_sb_reg(hw,
2906 IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id),
2907 IXGBE_SB_IOSF_TARGET_KR_PHY,
2908 ®_val);
2909 if (rc)
2910 return rc;
2911
2912 reg_val &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE |
2913 IXGBE_KRM_AN_CNTL_1_ASM_PAUSE);
2914 if (pause)
2915 reg_val |= IXGBE_KRM_AN_CNTL_1_SYM_PAUSE;
2916 if (asm_dir)
2917 reg_val |= IXGBE_KRM_AN_CNTL_1_ASM_PAUSE;
2918 rc = hw->mac.ops.write_iosf_sb_reg(hw,
2919 IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id),
2920 IXGBE_SB_IOSF_TARGET_KR_PHY,
2921 reg_val);
2922
2923 /* This device does not fully support AN. */
2924 hw->fc.disable_fc_autoneg = true;
2925 break;
2926 case IXGBE_DEV_ID_X550EM_X_XFI:
2927 hw->fc.disable_fc_autoneg = true;
2928 break;
2929 default:
2930 break;
2931 }
2932 return rc;
2933 }
2934
2935 /**
2936 * ixgbe_fc_autoneg_backplane_x550em_a - Enable flow control IEEE clause 37
2937 * @hw: pointer to hardware structure
2938 **/
ixgbe_fc_autoneg_backplane_x550em_a(struct ixgbe_hw * hw)2939 static void ixgbe_fc_autoneg_backplane_x550em_a(struct ixgbe_hw *hw)
2940 {
2941 u32 link_s1, lp_an_page_low, an_cntl_1;
2942 ixgbe_link_speed speed;
2943 int status = -EIO;
2944 bool link_up;
2945
2946 /* AN should have completed when the cable was plugged in.
2947 * Look for reasons to bail out. Bail out if:
2948 * - FC autoneg is disabled, or if
2949 * - link is not up.
2950 */
2951 if (hw->fc.disable_fc_autoneg) {
2952 hw_err(hw, "Flow control autoneg is disabled");
2953 goto out;
2954 }
2955
2956 hw->mac.ops.check_link(hw, &speed, &link_up, false);
2957 if (!link_up) {
2958 hw_err(hw, "The link is down");
2959 goto out;
2960 }
2961
2962 /* Check at auto-negotiation has completed */
2963 status = hw->mac.ops.read_iosf_sb_reg(hw,
2964 IXGBE_KRM_LINK_S1(hw->bus.lan_id),
2965 IXGBE_SB_IOSF_TARGET_KR_PHY, &link_s1);
2966
2967 if (status || (link_s1 & IXGBE_KRM_LINK_S1_MAC_AN_COMPLETE) == 0) {
2968 hw_dbg(hw, "Auto-Negotiation did not complete\n");
2969 status = -EIO;
2970 goto out;
2971 }
2972
2973 /* Read the 10g AN autoc and LP ability registers and resolve
2974 * local flow control settings accordingly
2975 */
2976 status = hw->mac.ops.read_iosf_sb_reg(hw,
2977 IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id),
2978 IXGBE_SB_IOSF_TARGET_KR_PHY, &an_cntl_1);
2979
2980 if (status) {
2981 hw_dbg(hw, "Auto-Negotiation did not complete\n");
2982 goto out;
2983 }
2984
2985 status = hw->mac.ops.read_iosf_sb_reg(hw,
2986 IXGBE_KRM_LP_BASE_PAGE_HIGH(hw->bus.lan_id),
2987 IXGBE_SB_IOSF_TARGET_KR_PHY, &lp_an_page_low);
2988
2989 if (status) {
2990 hw_dbg(hw, "Auto-Negotiation did not complete\n");
2991 goto out;
2992 }
2993
2994 status = ixgbe_negotiate_fc(hw, an_cntl_1, lp_an_page_low,
2995 IXGBE_KRM_AN_CNTL_1_SYM_PAUSE,
2996 IXGBE_KRM_AN_CNTL_1_ASM_PAUSE,
2997 IXGBE_KRM_LP_BASE_PAGE_HIGH_SYM_PAUSE,
2998 IXGBE_KRM_LP_BASE_PAGE_HIGH_ASM_PAUSE);
2999
3000 out:
3001 if (!status) {
3002 hw->fc.fc_was_autonegged = true;
3003 } else {
3004 hw->fc.fc_was_autonegged = false;
3005 hw->fc.current_mode = hw->fc.requested_mode;
3006 }
3007 }
3008
3009 /**
3010 * ixgbe_fc_autoneg_fiber_x550em_a - passthrough FC settings
3011 * @hw: pointer to hardware structure
3012 **/
ixgbe_fc_autoneg_fiber_x550em_a(struct ixgbe_hw * hw)3013 static void ixgbe_fc_autoneg_fiber_x550em_a(struct ixgbe_hw *hw)
3014 {
3015 hw->fc.fc_was_autonegged = false;
3016 hw->fc.current_mode = hw->fc.requested_mode;
3017 }
3018
3019 /** ixgbe_enter_lplu_x550em - Transition to low power states
3020 * @hw: pointer to hardware structure
3021 *
3022 * Configures Low Power Link Up on transition to low power states
3023 * (from D0 to non-D0). Link is required to enter LPLU so avoid resetting
3024 * the X557 PHY immediately prior to entering LPLU.
3025 **/
ixgbe_enter_lplu_t_x550em(struct ixgbe_hw * hw)3026 static int ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw)
3027 {
3028 u16 an_10g_cntl_reg, autoneg_reg, speed;
3029 ixgbe_link_speed lcd_speed;
3030 u32 save_autoneg;
3031 bool link_up;
3032 int status;
3033
3034 /* If blocked by MNG FW, then don't restart AN */
3035 if (ixgbe_check_reset_blocked(hw))
3036 return 0;
3037
3038 status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
3039 if (status)
3040 return status;
3041
3042 status = hw->eeprom.ops.read(hw, NVM_INIT_CTRL_3,
3043 &hw->eeprom.ctrl_word_3);
3044 if (status)
3045 return status;
3046
3047 /* If link is down, LPLU disabled in NVM, WoL disabled, or
3048 * manageability disabled, then force link down by entering
3049 * low power mode.
3050 */
3051 if (!link_up || !(hw->eeprom.ctrl_word_3 & NVM_INIT_CTRL_3_LPLU) ||
3052 !(hw->wol_enabled || ixgbe_mng_present(hw)))
3053 return ixgbe_set_copper_phy_power(hw, false);
3054
3055 /* Determine LCD */
3056 status = ixgbe_get_lcd_t_x550em(hw, &lcd_speed);
3057 if (status)
3058 return status;
3059
3060 /* If no valid LCD link speed, then force link down and exit. */
3061 if (lcd_speed == IXGBE_LINK_SPEED_UNKNOWN)
3062 return ixgbe_set_copper_phy_power(hw, false);
3063
3064 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT,
3065 MDIO_MMD_AN,
3066 &speed);
3067 if (status)
3068 return status;
3069
3070 /* If no link now, speed is invalid so take link down */
3071 status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up);
3072 if (status)
3073 return ixgbe_set_copper_phy_power(hw, false);
3074
3075 /* clear everything but the speed bits */
3076 speed &= IXGBE_MDIO_AUTO_NEG_VEN_STAT_SPEED_MASK;
3077
3078 /* If current speed is already LCD, then exit. */
3079 if (((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB) &&
3080 (lcd_speed == IXGBE_LINK_SPEED_1GB_FULL)) ||
3081 ((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB) &&
3082 (lcd_speed == IXGBE_LINK_SPEED_10GB_FULL)))
3083 return 0;
3084
3085 /* Clear AN completed indication */
3086 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM,
3087 MDIO_MMD_AN,
3088 &autoneg_reg);
3089 if (status)
3090 return status;
3091
3092 status = hw->phy.ops.read_reg(hw, MDIO_AN_10GBT_CTRL,
3093 MDIO_MMD_AN,
3094 &an_10g_cntl_reg);
3095 if (status)
3096 return status;
3097
3098 status = hw->phy.ops.read_reg(hw,
3099 IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
3100 MDIO_MMD_AN,
3101 &autoneg_reg);
3102 if (status)
3103 return status;
3104
3105 save_autoneg = hw->phy.autoneg_advertised;
3106
3107 /* Setup link at least common link speed */
3108 status = hw->mac.ops.setup_link(hw, lcd_speed, false);
3109
3110 /* restore autoneg from before setting lplu speed */
3111 hw->phy.autoneg_advertised = save_autoneg;
3112
3113 return status;
3114 }
3115
3116 /**
3117 * ixgbe_reset_phy_fw - Reset firmware-controlled PHYs
3118 * @hw: pointer to hardware structure
3119 */
ixgbe_reset_phy_fw(struct ixgbe_hw * hw)3120 static int ixgbe_reset_phy_fw(struct ixgbe_hw *hw)
3121 {
3122 u32 store[FW_PHY_ACT_DATA_COUNT] = { 0 };
3123 int rc;
3124
3125 if (hw->phy.reset_disable || ixgbe_check_reset_blocked(hw))
3126 return 0;
3127
3128 rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_PHY_SW_RESET, &store);
3129 if (rc)
3130 return rc;
3131 memset(store, 0, sizeof(store));
3132
3133 rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_INIT_PHY, &store);
3134 if (rc)
3135 return rc;
3136
3137 return ixgbe_setup_fw_link(hw);
3138 }
3139
3140 /**
3141 * ixgbe_check_overtemp_fw - Check firmware-controlled PHYs for overtemp
3142 * @hw: pointer to hardware structure
3143 *
3144 * Return true when an overtemp event detected, otherwise false.
3145 */
ixgbe_check_overtemp_fw(struct ixgbe_hw * hw)3146 static bool ixgbe_check_overtemp_fw(struct ixgbe_hw *hw)
3147 {
3148 u32 store[FW_PHY_ACT_DATA_COUNT] = { 0 };
3149 int rc;
3150
3151 rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_LINK_INFO, &store);
3152 if (rc)
3153 return false;
3154
3155 if (store[0] & FW_PHY_ACT_GET_LINK_INFO_TEMP) {
3156 ixgbe_shutdown_fw_phy(hw);
3157 return true;
3158 }
3159 return false;
3160 }
3161
3162 /**
3163 * ixgbe_read_mng_if_sel_x550em - Read NW_MNG_IF_SEL register
3164 * @hw: pointer to hardware structure
3165 *
3166 * Read NW_MNG_IF_SEL register and save field values.
3167 */
ixgbe_read_mng_if_sel_x550em(struct ixgbe_hw * hw)3168 static void ixgbe_read_mng_if_sel_x550em(struct ixgbe_hw *hw)
3169 {
3170 /* Save NW management interface connected on board. This is used
3171 * to determine internal PHY mode.
3172 */
3173 hw->phy.nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL);
3174
3175 /* If X552 (X550EM_a) and MDIO is connected to external PHY, then set
3176 * PHY address. This register field was has only been used for X552.
3177 */
3178 if (hw->mac.type == ixgbe_mac_x550em_a &&
3179 hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_MDIO_ACT) {
3180 hw->phy.mdio.prtad = FIELD_GET(IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD,
3181 hw->phy.nw_mng_if_sel);
3182 }
3183 }
3184
3185 /** ixgbe_init_phy_ops_X550em - PHY/SFP specific init
3186 * @hw: pointer to hardware structure
3187 *
3188 * Initialize any function pointers that were not able to be
3189 * set during init_shared_code because the PHY/SFP type was
3190 * not known. Perform the SFP init if necessary.
3191 **/
ixgbe_init_phy_ops_X550em(struct ixgbe_hw * hw)3192 static int ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
3193 {
3194 struct ixgbe_phy_info *phy = &hw->phy;
3195 int ret_val;
3196
3197 hw->mac.ops.set_lan_id(hw);
3198
3199 ixgbe_read_mng_if_sel_x550em(hw);
3200
3201 if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) {
3202 phy->phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
3203 ixgbe_setup_mux_ctl(hw);
3204 }
3205
3206 /* Identify the PHY or SFP module */
3207 ret_val = phy->ops.identify(hw);
3208 if (ret_val == -EOPNOTSUPP || ret_val == -EFAULT)
3209 return ret_val;
3210
3211 /* Setup function pointers based on detected hardware */
3212 ixgbe_init_mac_link_ops_X550em(hw);
3213 if (phy->sfp_type != ixgbe_sfp_type_unknown)
3214 phy->ops.reset = NULL;
3215
3216 /* Set functions pointers based on phy type */
3217 switch (hw->phy.type) {
3218 case ixgbe_phy_x550em_kx4:
3219 phy->ops.setup_link = NULL;
3220 phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
3221 phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
3222 break;
3223 case ixgbe_phy_x550em_kr:
3224 phy->ops.setup_link = ixgbe_setup_kr_x550em;
3225 phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
3226 phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
3227 break;
3228 case ixgbe_phy_x550em_xfi:
3229 /* link is managed by HW */
3230 phy->ops.setup_link = NULL;
3231 phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
3232 phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
3233 break;
3234 case ixgbe_phy_x550em_ext_t:
3235 /* Save NW management interface connected on board. This is used
3236 * to determine internal PHY mode
3237 */
3238 phy->nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL);
3239
3240 /* If internal link mode is XFI, then setup iXFI internal link,
3241 * else setup KR now.
3242 */
3243 phy->ops.setup_internal_link =
3244 ixgbe_setup_internal_phy_t_x550em;
3245
3246 /* setup SW LPLU only for first revision */
3247 if (hw->mac.type == ixgbe_mac_X550EM_x &&
3248 !(IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0)) &
3249 IXGBE_FUSES0_REV_MASK))
3250 phy->ops.enter_lplu = ixgbe_enter_lplu_t_x550em;
3251
3252 phy->ops.handle_lasi = ixgbe_handle_lasi_ext_t_x550em;
3253 phy->ops.reset = ixgbe_reset_phy_t_X550em;
3254 break;
3255 case ixgbe_phy_sgmii:
3256 phy->ops.setup_link = NULL;
3257 break;
3258 case ixgbe_phy_fw:
3259 phy->ops.setup_link = ixgbe_setup_fw_link;
3260 phy->ops.reset = ixgbe_reset_phy_fw;
3261 break;
3262 case ixgbe_phy_ext_1g_t:
3263 phy->ops.setup_link = NULL;
3264 phy->ops.read_reg = NULL;
3265 phy->ops.write_reg = NULL;
3266 phy->ops.reset = NULL;
3267 break;
3268 default:
3269 break;
3270 }
3271
3272 return ret_val;
3273 }
3274
3275 /** ixgbe_get_media_type_X550em - Get media type
3276 * @hw: pointer to hardware structure
3277 *
3278 * Returns the media type (fiber, copper, backplane)
3279 *
3280 */
ixgbe_get_media_type_X550em(struct ixgbe_hw * hw)3281 static enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw)
3282 {
3283 enum ixgbe_media_type media_type;
3284
3285 /* Detect if there is a copper PHY attached. */
3286 switch (hw->device_id) {
3287 case IXGBE_DEV_ID_X550EM_A_SGMII:
3288 case IXGBE_DEV_ID_X550EM_A_SGMII_L:
3289 hw->phy.type = ixgbe_phy_sgmii;
3290 fallthrough;
3291 case IXGBE_DEV_ID_X550EM_X_KR:
3292 case IXGBE_DEV_ID_X550EM_X_KX4:
3293 case IXGBE_DEV_ID_X550EM_X_XFI:
3294 case IXGBE_DEV_ID_X550EM_A_KR:
3295 case IXGBE_DEV_ID_X550EM_A_KR_L:
3296 media_type = ixgbe_media_type_backplane;
3297 break;
3298 case IXGBE_DEV_ID_X550EM_X_SFP:
3299 case IXGBE_DEV_ID_X550EM_A_SFP:
3300 case IXGBE_DEV_ID_X550EM_A_SFP_N:
3301 media_type = ixgbe_media_type_fiber;
3302 break;
3303 case IXGBE_DEV_ID_X550EM_X_1G_T:
3304 case IXGBE_DEV_ID_X550EM_X_10G_T:
3305 case IXGBE_DEV_ID_X550EM_A_10G_T:
3306 case IXGBE_DEV_ID_X550EM_A_1G_T:
3307 case IXGBE_DEV_ID_X550EM_A_1G_T_L:
3308 media_type = ixgbe_media_type_copper;
3309 break;
3310 default:
3311 media_type = ixgbe_media_type_unknown;
3312 break;
3313 }
3314 return media_type;
3315 }
3316
3317 /** ixgbe_init_ext_t_x550em - Start (unstall) the external Base T PHY.
3318 ** @hw: pointer to hardware structure
3319 **/
ixgbe_init_ext_t_x550em(struct ixgbe_hw * hw)3320 static int ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw)
3321 {
3322 int status;
3323 u16 reg;
3324
3325 status = hw->phy.ops.read_reg(hw,
3326 IXGBE_MDIO_TX_VENDOR_ALARMS_3,
3327 MDIO_MMD_PMAPMD,
3328 ®);
3329 if (status)
3330 return status;
3331
3332 /* If PHY FW reset completed bit is set then this is the first
3333 * SW instance after a power on so the PHY FW must be un-stalled.
3334 */
3335 if (reg & IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK) {
3336 status = hw->phy.ops.read_reg(hw,
3337 IXGBE_MDIO_GLOBAL_RES_PR_10,
3338 MDIO_MMD_VEND1,
3339 ®);
3340 if (status)
3341 return status;
3342
3343 reg &= ~IXGBE_MDIO_POWER_UP_STALL;
3344
3345 status = hw->phy.ops.write_reg(hw,
3346 IXGBE_MDIO_GLOBAL_RES_PR_10,
3347 MDIO_MMD_VEND1,
3348 reg);
3349 if (status)
3350 return status;
3351 }
3352
3353 return status;
3354 }
3355
3356 /**
3357 * ixgbe_set_mdio_speed - Set MDIO clock speed
3358 * @hw: pointer to hardware structure
3359 */
ixgbe_set_mdio_speed(struct ixgbe_hw * hw)3360 static void ixgbe_set_mdio_speed(struct ixgbe_hw *hw)
3361 {
3362 u32 hlreg0;
3363
3364 switch (hw->device_id) {
3365 case IXGBE_DEV_ID_X550EM_X_10G_T:
3366 case IXGBE_DEV_ID_X550EM_A_SGMII:
3367 case IXGBE_DEV_ID_X550EM_A_SGMII_L:
3368 case IXGBE_DEV_ID_X550EM_A_10G_T:
3369 case IXGBE_DEV_ID_X550EM_A_SFP:
3370 /* Config MDIO clock speed before the first MDIO PHY access */
3371 hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
3372 hlreg0 &= ~IXGBE_HLREG0_MDCSPD;
3373 IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
3374 break;
3375 case IXGBE_DEV_ID_X550EM_A_1G_T:
3376 case IXGBE_DEV_ID_X550EM_A_1G_T_L:
3377 /* Select fast MDIO clock speed for these devices */
3378 hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
3379 hlreg0 |= IXGBE_HLREG0_MDCSPD;
3380 IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
3381 break;
3382 default:
3383 break;
3384 }
3385 }
3386
3387 /** ixgbe_reset_hw_X550em - Perform hardware reset
3388 ** @hw: pointer to hardware structure
3389 **
3390 ** Resets the hardware by resetting the transmit and receive units, masks
3391 ** and clears all interrupts, perform a PHY reset, and perform a link (MAC)
3392 ** reset.
3393 **/
ixgbe_reset_hw_X550em(struct ixgbe_hw * hw)3394 static int ixgbe_reset_hw_X550em(struct ixgbe_hw *hw)
3395 {
3396 u32 swfw_mask = hw->phy.phy_semaphore_mask;
3397 ixgbe_link_speed link_speed;
3398 bool link_up = false;
3399 u32 ctrl = 0;
3400 int status;
3401 u32 i;
3402
3403 /* Call adapter stop to disable Tx/Rx and clear interrupts */
3404 status = hw->mac.ops.stop_adapter(hw);
3405 if (status)
3406 return status;
3407
3408 /* flush pending Tx transactions */
3409 ixgbe_clear_tx_pending(hw);
3410
3411 /* set MDIO speed before talking to the PHY in case it's the 1st time */
3412 ixgbe_set_mdio_speed(hw);
3413
3414 /* PHY ops must be identified and initialized prior to reset */
3415 status = hw->phy.ops.init(hw);
3416 if (status == -EOPNOTSUPP || status == -EFAULT)
3417 return status;
3418
3419 /* start the external PHY */
3420 if (hw->phy.type == ixgbe_phy_x550em_ext_t) {
3421 status = ixgbe_init_ext_t_x550em(hw);
3422 if (status)
3423 return status;
3424 }
3425
3426 /* Setup SFP module if there is one present. */
3427 if (hw->phy.sfp_setup_needed) {
3428 status = hw->mac.ops.setup_sfp(hw);
3429 hw->phy.sfp_setup_needed = false;
3430 }
3431
3432 if (status == -EOPNOTSUPP)
3433 return status;
3434
3435 /* Reset PHY */
3436 if (!hw->phy.reset_disable && hw->phy.ops.reset)
3437 hw->phy.ops.reset(hw);
3438
3439 mac_reset_top:
3440 /* Issue global reset to the MAC. Needs to be SW reset if link is up.
3441 * If link reset is used when link is up, it might reset the PHY when
3442 * mng is using it. If link is down or the flag to force full link
3443 * reset is set, then perform link reset.
3444 */
3445 ctrl = IXGBE_CTRL_LNK_RST;
3446
3447 if (!hw->force_full_reset) {
3448 hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
3449 if (link_up)
3450 ctrl = IXGBE_CTRL_RST;
3451 }
3452
3453 status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask);
3454 if (status) {
3455 hw_dbg(hw, "semaphore failed with %d", status);
3456 return -EBUSY;
3457 }
3458
3459 ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL);
3460 IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
3461 IXGBE_WRITE_FLUSH(hw);
3462 hw->mac.ops.release_swfw_sync(hw, swfw_mask);
3463 usleep_range(1000, 1200);
3464
3465 /* Poll for reset bit to self-clear meaning reset is complete */
3466 for (i = 0; i < 10; i++) {
3467 ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
3468 if (!(ctrl & IXGBE_CTRL_RST_MASK))
3469 break;
3470 udelay(1);
3471 }
3472
3473 if (ctrl & IXGBE_CTRL_RST_MASK) {
3474 status = -EIO;
3475 hw_dbg(hw, "Reset polling failed to complete.\n");
3476 }
3477
3478 msleep(50);
3479
3480 /* Double resets are required for recovery from certain error
3481 * clear the multicast table. Also reset num_rar_entries to 128,
3482 * since we modify this value when programming the SAN MAC address.
3483 */
3484 if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
3485 hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
3486 goto mac_reset_top;
3487 }
3488
3489 /* Store the permanent mac address */
3490 hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
3491
3492 /* Store MAC address from RAR0, clear receive address registers, and
3493 * clear the multicast table. Also reset num_rar_entries to 128,
3494 * since we modify this value when programming the SAN MAC address.
3495 */
3496 hw->mac.num_rar_entries = 128;
3497 hw->mac.ops.init_rx_addrs(hw);
3498
3499 ixgbe_set_mdio_speed(hw);
3500
3501 if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP)
3502 ixgbe_setup_mux_ctl(hw);
3503
3504 return status;
3505 }
3506
3507 /** ixgbe_set_ethertype_anti_spoofing_X550 - Enable/Disable Ethertype
3508 * anti-spoofing
3509 * @hw: pointer to hardware structure
3510 * @enable: enable or disable switch for Ethertype anti-spoofing
3511 * @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing
3512 **/
ixgbe_set_ethertype_anti_spoofing_X550(struct ixgbe_hw * hw,bool enable,int vf)3513 static void ixgbe_set_ethertype_anti_spoofing_X550(struct ixgbe_hw *hw,
3514 bool enable, int vf)
3515 {
3516 int vf_target_reg = vf >> 3;
3517 int vf_target_shift = vf % 8 + IXGBE_SPOOF_ETHERTYPEAS_SHIFT;
3518 u32 pfvfspoof;
3519
3520 pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg));
3521 if (enable)
3522 pfvfspoof |= BIT(vf_target_shift);
3523 else
3524 pfvfspoof &= ~BIT(vf_target_shift);
3525
3526 IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof);
3527 }
3528
3529 /** ixgbe_set_source_address_pruning_X550 - Enable/Disbale src address pruning
3530 * @hw: pointer to hardware structure
3531 * @enable: enable or disable source address pruning
3532 * @pool: Rx pool to set source address pruning for
3533 **/
ixgbe_set_source_address_pruning_X550(struct ixgbe_hw * hw,bool enable,unsigned int pool)3534 static void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw,
3535 bool enable,
3536 unsigned int pool)
3537 {
3538 u64 pfflp;
3539
3540 /* max rx pool is 63 */
3541 if (pool > 63)
3542 return;
3543
3544 pfflp = (u64)IXGBE_READ_REG(hw, IXGBE_PFFLPL);
3545 pfflp |= (u64)IXGBE_READ_REG(hw, IXGBE_PFFLPH) << 32;
3546
3547 if (enable)
3548 pfflp |= (1ULL << pool);
3549 else
3550 pfflp &= ~(1ULL << pool);
3551
3552 IXGBE_WRITE_REG(hw, IXGBE_PFFLPL, (u32)pfflp);
3553 IXGBE_WRITE_REG(hw, IXGBE_PFFLPH, (u32)(pfflp >> 32));
3554 }
3555
3556 /**
3557 * ixgbe_setup_fc_backplane_x550em_a - Set up flow control
3558 * @hw: pointer to hardware structure
3559 *
3560 * Called at init time to set up flow control.
3561 **/
ixgbe_setup_fc_backplane_x550em_a(struct ixgbe_hw * hw)3562 static int ixgbe_setup_fc_backplane_x550em_a(struct ixgbe_hw *hw)
3563 {
3564 u32 an_cntl = 0;
3565 int status = 0;
3566
3567 /* Validate the requested mode */
3568 if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
3569 hw_err(hw, "ixgbe_fc_rx_pause not valid in strict IEEE mode\n");
3570 return -EINVAL;
3571 }
3572
3573 if (hw->fc.requested_mode == ixgbe_fc_default)
3574 hw->fc.requested_mode = ixgbe_fc_full;
3575
3576 /* Set up the 1G and 10G flow control advertisement registers so the
3577 * HW will be able to do FC autoneg once the cable is plugged in. If
3578 * we link at 10G, the 1G advertisement is harmless and vice versa.
3579 */
3580 status = hw->mac.ops.read_iosf_sb_reg(hw,
3581 IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id),
3582 IXGBE_SB_IOSF_TARGET_KR_PHY, &an_cntl);
3583
3584 if (status) {
3585 hw_dbg(hw, "Auto-Negotiation did not complete\n");
3586 return status;
3587 }
3588
3589 /* The possible values of fc.requested_mode are:
3590 * 0: Flow control is completely disabled
3591 * 1: Rx flow control is enabled (we can receive pause frames,
3592 * but not send pause frames).
3593 * 2: Tx flow control is enabled (we can send pause frames but
3594 * we do not support receiving pause frames).
3595 * 3: Both Rx and Tx flow control (symmetric) are enabled.
3596 * other: Invalid.
3597 */
3598 switch (hw->fc.requested_mode) {
3599 case ixgbe_fc_none:
3600 /* Flow control completely disabled by software override. */
3601 an_cntl &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE |
3602 IXGBE_KRM_AN_CNTL_1_ASM_PAUSE);
3603 break;
3604 case ixgbe_fc_tx_pause:
3605 /* Tx Flow control is enabled, and Rx Flow control is
3606 * disabled by software override.
3607 */
3608 an_cntl |= IXGBE_KRM_AN_CNTL_1_ASM_PAUSE;
3609 an_cntl &= ~IXGBE_KRM_AN_CNTL_1_SYM_PAUSE;
3610 break;
3611 case ixgbe_fc_rx_pause:
3612 /* Rx Flow control is enabled and Tx Flow control is
3613 * disabled by software override. Since there really
3614 * isn't a way to advertise that we are capable of RX
3615 * Pause ONLY, we will advertise that we support both
3616 * symmetric and asymmetric Rx PAUSE, as such we fall
3617 * through to the fc_full statement. Later, we will
3618 * disable the adapter's ability to send PAUSE frames.
3619 */
3620 case ixgbe_fc_full:
3621 /* Flow control (both Rx and Tx) is enabled by SW override. */
3622 an_cntl |= IXGBE_KRM_AN_CNTL_1_SYM_PAUSE |
3623 IXGBE_KRM_AN_CNTL_1_ASM_PAUSE;
3624 break;
3625 default:
3626 hw_err(hw, "Flow control param set incorrectly\n");
3627 return -EIO;
3628 }
3629
3630 status = hw->mac.ops.write_iosf_sb_reg(hw,
3631 IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id),
3632 IXGBE_SB_IOSF_TARGET_KR_PHY, an_cntl);
3633
3634 /* Restart auto-negotiation. */
3635 status = ixgbe_restart_an_internal_phy_x550em(hw);
3636
3637 return status;
3638 }
3639
3640 /**
3641 * ixgbe_set_mux - Set mux for port 1 access with CS4227
3642 * @hw: pointer to hardware structure
3643 * @state: set mux if 1, clear if 0
3644 */
ixgbe_set_mux(struct ixgbe_hw * hw,u8 state)3645 static void ixgbe_set_mux(struct ixgbe_hw *hw, u8 state)
3646 {
3647 u32 esdp;
3648
3649 if (!hw->bus.lan_id)
3650 return;
3651 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
3652 if (state)
3653 esdp |= IXGBE_ESDP_SDP1;
3654 else
3655 esdp &= ~IXGBE_ESDP_SDP1;
3656 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
3657 IXGBE_WRITE_FLUSH(hw);
3658 }
3659
3660 /**
3661 * ixgbe_acquire_swfw_sync_X550em - Acquire SWFW semaphore
3662 * @hw: pointer to hardware structure
3663 * @mask: Mask to specify which semaphore to acquire
3664 *
3665 * Acquires the SWFW semaphore and sets the I2C MUX
3666 */
ixgbe_acquire_swfw_sync_X550em(struct ixgbe_hw * hw,u32 mask)3667 static int ixgbe_acquire_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask)
3668 {
3669 int status;
3670
3671 status = ixgbe_acquire_swfw_sync_X540(hw, mask);
3672 if (status)
3673 return status;
3674
3675 if (mask & IXGBE_GSSR_I2C_MASK)
3676 ixgbe_set_mux(hw, 1);
3677
3678 return 0;
3679 }
3680
3681 /**
3682 * ixgbe_release_swfw_sync_X550em - Release SWFW semaphore
3683 * @hw: pointer to hardware structure
3684 * @mask: Mask to specify which semaphore to release
3685 *
3686 * Releases the SWFW semaphore and sets the I2C MUX
3687 */
ixgbe_release_swfw_sync_X550em(struct ixgbe_hw * hw,u32 mask)3688 static void ixgbe_release_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask)
3689 {
3690 if (mask & IXGBE_GSSR_I2C_MASK)
3691 ixgbe_set_mux(hw, 0);
3692
3693 ixgbe_release_swfw_sync_X540(hw, mask);
3694 }
3695
3696 /**
3697 * ixgbe_acquire_swfw_sync_x550em_a - Acquire SWFW semaphore
3698 * @hw: pointer to hardware structure
3699 * @mask: Mask to specify which semaphore to acquire
3700 *
3701 * Acquires the SWFW semaphore and get the shared PHY token as needed
3702 */
ixgbe_acquire_swfw_sync_x550em_a(struct ixgbe_hw * hw,u32 mask)3703 static int ixgbe_acquire_swfw_sync_x550em_a(struct ixgbe_hw *hw, u32 mask)
3704 {
3705 u32 hmask = mask & ~IXGBE_GSSR_TOKEN_SM;
3706 int retries = FW_PHY_TOKEN_RETRIES;
3707 int status;
3708
3709 while (--retries) {
3710 status = 0;
3711 if (hmask)
3712 status = ixgbe_acquire_swfw_sync_X540(hw, hmask);
3713 if (status)
3714 return status;
3715 if (!(mask & IXGBE_GSSR_TOKEN_SM))
3716 return 0;
3717
3718 status = ixgbe_get_phy_token(hw);
3719 if (!status)
3720 return 0;
3721 if (hmask)
3722 ixgbe_release_swfw_sync_X540(hw, hmask);
3723 if (status != -EAGAIN)
3724 return status;
3725 msleep(FW_PHY_TOKEN_DELAY);
3726 }
3727
3728 return status;
3729 }
3730
3731 /**
3732 * ixgbe_release_swfw_sync_x550em_a - Release SWFW semaphore
3733 * @hw: pointer to hardware structure
3734 * @mask: Mask to specify which semaphore to release
3735 *
3736 * Release the SWFW semaphore and puts the shared PHY token as needed
3737 */
ixgbe_release_swfw_sync_x550em_a(struct ixgbe_hw * hw,u32 mask)3738 static void ixgbe_release_swfw_sync_x550em_a(struct ixgbe_hw *hw, u32 mask)
3739 {
3740 u32 hmask = mask & ~IXGBE_GSSR_TOKEN_SM;
3741
3742 if (mask & IXGBE_GSSR_TOKEN_SM)
3743 ixgbe_put_phy_token(hw);
3744
3745 if (hmask)
3746 ixgbe_release_swfw_sync_X540(hw, hmask);
3747 }
3748
3749 /**
3750 * ixgbe_read_phy_reg_x550a - Reads specified PHY register
3751 * @hw: pointer to hardware structure
3752 * @reg_addr: 32 bit address of PHY register to read
3753 * @device_type: 5 bit device type
3754 * @phy_data: Pointer to read data from PHY register
3755 *
3756 * Reads a value from a specified PHY register using the SWFW lock and PHY
3757 * Token. The PHY Token is needed since the MDIO is shared between to MAC
3758 * instances.
3759 */
ixgbe_read_phy_reg_x550a(struct ixgbe_hw * hw,u32 reg_addr,u32 device_type,u16 * phy_data)3760 static int ixgbe_read_phy_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr,
3761 u32 device_type, u16 *phy_data)
3762 {
3763 u32 mask = hw->phy.phy_semaphore_mask | IXGBE_GSSR_TOKEN_SM;
3764 int status;
3765
3766 if (hw->mac.ops.acquire_swfw_sync(hw, mask))
3767 return -EBUSY;
3768
3769 status = hw->phy.ops.read_reg_mdi(hw, reg_addr, device_type, phy_data);
3770
3771 hw->mac.ops.release_swfw_sync(hw, mask);
3772
3773 return status;
3774 }
3775
3776 /**
3777 * ixgbe_write_phy_reg_x550a - Writes specified PHY register
3778 * @hw: pointer to hardware structure
3779 * @reg_addr: 32 bit PHY register to write
3780 * @device_type: 5 bit device type
3781 * @phy_data: Data to write to the PHY register
3782 *
3783 * Writes a value to specified PHY register using the SWFW lock and PHY Token.
3784 * The PHY Token is needed since the MDIO is shared between to MAC instances.
3785 */
ixgbe_write_phy_reg_x550a(struct ixgbe_hw * hw,u32 reg_addr,u32 device_type,u16 phy_data)3786 static int ixgbe_write_phy_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr,
3787 u32 device_type, u16 phy_data)
3788 {
3789 u32 mask = hw->phy.phy_semaphore_mask | IXGBE_GSSR_TOKEN_SM;
3790 int status;
3791
3792 if (hw->mac.ops.acquire_swfw_sync(hw, mask))
3793 return -EBUSY;
3794
3795 status = ixgbe_write_phy_reg_mdi(hw, reg_addr, device_type, phy_data);
3796 hw->mac.ops.release_swfw_sync(hw, mask);
3797
3798 return status;
3799 }
3800
3801 #define X550_COMMON_MAC \
3802 .init_hw = &ixgbe_init_hw_generic, \
3803 .start_hw = &ixgbe_start_hw_X540, \
3804 .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic, \
3805 .enable_rx_dma = &ixgbe_enable_rx_dma_generic, \
3806 .get_mac_addr = &ixgbe_get_mac_addr_generic, \
3807 .get_device_caps = &ixgbe_get_device_caps_generic, \
3808 .stop_adapter = &ixgbe_stop_adapter_generic, \
3809 .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie, \
3810 .read_analog_reg8 = NULL, \
3811 .write_analog_reg8 = NULL, \
3812 .set_rxpba = &ixgbe_set_rxpba_generic, \
3813 .check_link = &ixgbe_check_mac_link_generic, \
3814 .blink_led_start = &ixgbe_blink_led_start_X540, \
3815 .blink_led_stop = &ixgbe_blink_led_stop_X540, \
3816 .set_rar = &ixgbe_set_rar_generic, \
3817 .clear_rar = &ixgbe_clear_rar_generic, \
3818 .set_vmdq = &ixgbe_set_vmdq_generic, \
3819 .set_vmdq_san_mac = &ixgbe_set_vmdq_san_mac_generic, \
3820 .clear_vmdq = &ixgbe_clear_vmdq_generic, \
3821 .init_rx_addrs = &ixgbe_init_rx_addrs_generic, \
3822 .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic, \
3823 .enable_mc = &ixgbe_enable_mc_generic, \
3824 .disable_mc = &ixgbe_disable_mc_generic, \
3825 .clear_vfta = &ixgbe_clear_vfta_generic, \
3826 .set_vfta = &ixgbe_set_vfta_generic, \
3827 .fc_enable = &ixgbe_fc_enable_generic, \
3828 .set_fw_drv_ver = &ixgbe_set_fw_drv_ver_x550, \
3829 .init_uta_tables = &ixgbe_init_uta_tables_generic, \
3830 .set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing, \
3831 .set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing, \
3832 .set_source_address_pruning = \
3833 &ixgbe_set_source_address_pruning_X550, \
3834 .set_ethertype_anti_spoofing = \
3835 &ixgbe_set_ethertype_anti_spoofing_X550, \
3836 .disable_rx_buff = &ixgbe_disable_rx_buff_generic, \
3837 .enable_rx_buff = &ixgbe_enable_rx_buff_generic, \
3838 .get_thermal_sensor_data = NULL, \
3839 .init_thermal_sensor_thresh = NULL, \
3840 .fw_recovery_mode = &ixgbe_fw_recovery_mode_X550, \
3841 .enable_rx = &ixgbe_enable_rx_generic, \
3842 .disable_rx = &ixgbe_disable_rx_x550, \
3843
3844 static const struct ixgbe_mac_operations mac_ops_X550 = {
3845 X550_COMMON_MAC
3846 .led_on = ixgbe_led_on_generic,
3847 .led_off = ixgbe_led_off_generic,
3848 .init_led_link_act = ixgbe_init_led_link_act_generic,
3849 .reset_hw = &ixgbe_reset_hw_X540,
3850 .get_media_type = &ixgbe_get_media_type_X540,
3851 .get_san_mac_addr = &ixgbe_get_san_mac_addr_generic,
3852 .get_wwn_prefix = &ixgbe_get_wwn_prefix_generic,
3853 .setup_link = &ixgbe_setup_mac_link_X540,
3854 .get_link_capabilities = &ixgbe_get_copper_link_capabilities_generic,
3855 .get_bus_info = &ixgbe_get_bus_info_generic,
3856 .setup_sfp = NULL,
3857 .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X540,
3858 .release_swfw_sync = &ixgbe_release_swfw_sync_X540,
3859 .init_swfw_sync = &ixgbe_init_swfw_sync_X540,
3860 .prot_autoc_read = prot_autoc_read_generic,
3861 .prot_autoc_write = prot_autoc_write_generic,
3862 .setup_fc = ixgbe_setup_fc_generic,
3863 .fc_autoneg = ixgbe_fc_autoneg,
3864 };
3865
3866 static const struct ixgbe_mac_operations mac_ops_X550EM_x = {
3867 X550_COMMON_MAC
3868 .led_on = ixgbe_led_on_t_x550em,
3869 .led_off = ixgbe_led_off_t_x550em,
3870 .init_led_link_act = ixgbe_init_led_link_act_generic,
3871 .reset_hw = &ixgbe_reset_hw_X550em,
3872 .get_media_type = &ixgbe_get_media_type_X550em,
3873 .get_san_mac_addr = NULL,
3874 .get_wwn_prefix = NULL,
3875 .setup_link = &ixgbe_setup_mac_link_X540,
3876 .get_link_capabilities = &ixgbe_get_link_capabilities_X550em,
3877 .get_bus_info = &ixgbe_get_bus_info_X550em,
3878 .setup_sfp = ixgbe_setup_sfp_modules_X550em,
3879 .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X550em,
3880 .release_swfw_sync = &ixgbe_release_swfw_sync_X550em,
3881 .init_swfw_sync = &ixgbe_init_swfw_sync_X540,
3882 .setup_fc = NULL, /* defined later */
3883 .fc_autoneg = ixgbe_fc_autoneg,
3884 .read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550,
3885 .write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550,
3886 };
3887
3888 static const struct ixgbe_mac_operations mac_ops_X550EM_x_fw = {
3889 X550_COMMON_MAC
3890 .led_on = NULL,
3891 .led_off = NULL,
3892 .init_led_link_act = NULL,
3893 .reset_hw = &ixgbe_reset_hw_X550em,
3894 .get_media_type = &ixgbe_get_media_type_X550em,
3895 .get_san_mac_addr = NULL,
3896 .get_wwn_prefix = NULL,
3897 .setup_link = &ixgbe_setup_mac_link_X540,
3898 .get_link_capabilities = &ixgbe_get_link_capabilities_X550em,
3899 .get_bus_info = &ixgbe_get_bus_info_X550em,
3900 .setup_sfp = ixgbe_setup_sfp_modules_X550em,
3901 .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X550em,
3902 .release_swfw_sync = &ixgbe_release_swfw_sync_X550em,
3903 .init_swfw_sync = &ixgbe_init_swfw_sync_X540,
3904 .setup_fc = NULL,
3905 .fc_autoneg = ixgbe_fc_autoneg,
3906 .read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550,
3907 .write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550,
3908 };
3909
3910 static const struct ixgbe_mac_operations mac_ops_x550em_a = {
3911 X550_COMMON_MAC
3912 .led_on = ixgbe_led_on_t_x550em,
3913 .led_off = ixgbe_led_off_t_x550em,
3914 .init_led_link_act = ixgbe_init_led_link_act_generic,
3915 .reset_hw = ixgbe_reset_hw_X550em,
3916 .get_media_type = ixgbe_get_media_type_X550em,
3917 .get_san_mac_addr = NULL,
3918 .get_wwn_prefix = NULL,
3919 .setup_link = &ixgbe_setup_mac_link_X540,
3920 .get_link_capabilities = ixgbe_get_link_capabilities_X550em,
3921 .get_bus_info = ixgbe_get_bus_info_X550em,
3922 .setup_sfp = ixgbe_setup_sfp_modules_X550em,
3923 .acquire_swfw_sync = ixgbe_acquire_swfw_sync_x550em_a,
3924 .release_swfw_sync = ixgbe_release_swfw_sync_x550em_a,
3925 .setup_fc = ixgbe_setup_fc_x550em,
3926 .fc_autoneg = ixgbe_fc_autoneg,
3927 .read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550a,
3928 .write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550a,
3929 };
3930
3931 static const struct ixgbe_mac_operations mac_ops_x550em_a_fw = {
3932 X550_COMMON_MAC
3933 .led_on = ixgbe_led_on_generic,
3934 .led_off = ixgbe_led_off_generic,
3935 .init_led_link_act = ixgbe_init_led_link_act_generic,
3936 .reset_hw = ixgbe_reset_hw_X550em,
3937 .get_media_type = ixgbe_get_media_type_X550em,
3938 .get_san_mac_addr = NULL,
3939 .get_wwn_prefix = NULL,
3940 .setup_link = NULL, /* defined later */
3941 .get_link_capabilities = ixgbe_get_link_capabilities_X550em,
3942 .get_bus_info = ixgbe_get_bus_info_X550em,
3943 .setup_sfp = ixgbe_setup_sfp_modules_X550em,
3944 .acquire_swfw_sync = ixgbe_acquire_swfw_sync_x550em_a,
3945 .release_swfw_sync = ixgbe_release_swfw_sync_x550em_a,
3946 .setup_fc = ixgbe_setup_fc_x550em,
3947 .fc_autoneg = ixgbe_fc_autoneg,
3948 .read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550a,
3949 .write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550a,
3950 };
3951
3952 #define X550_COMMON_EEP \
3953 .read = &ixgbe_read_ee_hostif_X550, \
3954 .read_buffer = &ixgbe_read_ee_hostif_buffer_X550, \
3955 .write = &ixgbe_write_ee_hostif_X550, \
3956 .write_buffer = &ixgbe_write_ee_hostif_buffer_X550, \
3957 .validate_checksum = &ixgbe_validate_eeprom_checksum_X550, \
3958 .update_checksum = &ixgbe_update_eeprom_checksum_X550, \
3959 .calc_checksum = &ixgbe_calc_eeprom_checksum_X550, \
3960
3961 static const struct ixgbe_eeprom_operations eeprom_ops_X550 = {
3962 X550_COMMON_EEP
3963 .init_params = &ixgbe_init_eeprom_params_X550,
3964 };
3965
3966 static const struct ixgbe_eeprom_operations eeprom_ops_X550EM_x = {
3967 X550_COMMON_EEP
3968 .init_params = &ixgbe_init_eeprom_params_X540,
3969 };
3970
3971 #define X550_COMMON_PHY \
3972 .identify_sfp = &ixgbe_identify_module_generic, \
3973 .reset = NULL, \
3974 .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, \
3975 .read_i2c_byte = &ixgbe_read_i2c_byte_generic, \
3976 .write_i2c_byte = &ixgbe_write_i2c_byte_generic, \
3977 .read_i2c_sff8472 = &ixgbe_read_i2c_sff8472_generic, \
3978 .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic, \
3979 .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic, \
3980 .setup_link = &ixgbe_setup_phy_link_generic, \
3981 .set_phy_power = NULL,
3982
3983 static const struct ixgbe_phy_operations phy_ops_X550 = {
3984 X550_COMMON_PHY
3985 .check_overtemp = &ixgbe_tn_check_overtemp,
3986 .init = NULL,
3987 .identify = &ixgbe_identify_phy_generic,
3988 .read_reg = &ixgbe_read_phy_reg_generic,
3989 .write_reg = &ixgbe_write_phy_reg_generic,
3990 };
3991
3992 static const struct ixgbe_phy_operations phy_ops_X550EM_x = {
3993 X550_COMMON_PHY
3994 .check_overtemp = &ixgbe_tn_check_overtemp,
3995 .init = &ixgbe_init_phy_ops_X550em,
3996 .identify = &ixgbe_identify_phy_x550em,
3997 .read_reg = &ixgbe_read_phy_reg_generic,
3998 .write_reg = &ixgbe_write_phy_reg_generic,
3999 };
4000
4001 static const struct ixgbe_phy_operations phy_ops_x550em_x_fw = {
4002 X550_COMMON_PHY
4003 .check_overtemp = NULL,
4004 .init = ixgbe_init_phy_ops_X550em,
4005 .identify = ixgbe_identify_phy_x550em,
4006 .read_reg = NULL,
4007 .write_reg = NULL,
4008 .read_reg_mdi = NULL,
4009 .write_reg_mdi = NULL,
4010 };
4011
4012 static const struct ixgbe_phy_operations phy_ops_x550em_a = {
4013 X550_COMMON_PHY
4014 .check_overtemp = &ixgbe_tn_check_overtemp,
4015 .init = &ixgbe_init_phy_ops_X550em,
4016 .identify = &ixgbe_identify_phy_x550em,
4017 .read_reg = &ixgbe_read_phy_reg_x550a,
4018 .write_reg = &ixgbe_write_phy_reg_x550a,
4019 .read_reg_mdi = &ixgbe_read_phy_reg_mdi,
4020 .write_reg_mdi = &ixgbe_write_phy_reg_mdi,
4021 };
4022
4023 static const struct ixgbe_phy_operations phy_ops_x550em_a_fw = {
4024 X550_COMMON_PHY
4025 .check_overtemp = ixgbe_check_overtemp_fw,
4026 .init = ixgbe_init_phy_ops_X550em,
4027 .identify = ixgbe_identify_phy_fw,
4028 .read_reg = NULL,
4029 .write_reg = NULL,
4030 .read_reg_mdi = NULL,
4031 .write_reg_mdi = NULL,
4032 };
4033
4034 static const struct ixgbe_link_operations link_ops_x550em_x = {
4035 .read_link = &ixgbe_read_i2c_combined_generic,
4036 .read_link_unlocked = &ixgbe_read_i2c_combined_generic_unlocked,
4037 .write_link = &ixgbe_write_i2c_combined_generic,
4038 .write_link_unlocked = &ixgbe_write_i2c_combined_generic_unlocked,
4039 };
4040
4041 static const u32 ixgbe_mvals_X550[IXGBE_MVALS_IDX_LIMIT] = {
4042 IXGBE_MVALS_INIT(X550)
4043 };
4044
4045 static const u32 ixgbe_mvals_X550EM_x[IXGBE_MVALS_IDX_LIMIT] = {
4046 IXGBE_MVALS_INIT(X550EM_x)
4047 };
4048
4049 static const u32 ixgbe_mvals_x550em_a[IXGBE_MVALS_IDX_LIMIT] = {
4050 IXGBE_MVALS_INIT(X550EM_a)
4051 };
4052
4053 const struct ixgbe_info ixgbe_X550_info = {
4054 .mac = ixgbe_mac_X550,
4055 .get_invariants = &ixgbe_get_invariants_X540,
4056 .mac_ops = &mac_ops_X550,
4057 .eeprom_ops = &eeprom_ops_X550,
4058 .phy_ops = &phy_ops_X550,
4059 .mbx_ops = &mbx_ops_generic,
4060 .mvals = ixgbe_mvals_X550,
4061 };
4062
4063 const struct ixgbe_info ixgbe_X550EM_x_info = {
4064 .mac = ixgbe_mac_X550EM_x,
4065 .get_invariants = &ixgbe_get_invariants_X550_x,
4066 .mac_ops = &mac_ops_X550EM_x,
4067 .eeprom_ops = &eeprom_ops_X550EM_x,
4068 .phy_ops = &phy_ops_X550EM_x,
4069 .mbx_ops = &mbx_ops_generic,
4070 .mvals = ixgbe_mvals_X550EM_x,
4071 .link_ops = &link_ops_x550em_x,
4072 };
4073
4074 const struct ixgbe_info ixgbe_x550em_x_fw_info = {
4075 .mac = ixgbe_mac_X550EM_x,
4076 .get_invariants = ixgbe_get_invariants_X550_x_fw,
4077 .mac_ops = &mac_ops_X550EM_x_fw,
4078 .eeprom_ops = &eeprom_ops_X550EM_x,
4079 .phy_ops = &phy_ops_x550em_x_fw,
4080 .mbx_ops = &mbx_ops_generic,
4081 .mvals = ixgbe_mvals_X550EM_x,
4082 };
4083
4084 const struct ixgbe_info ixgbe_x550em_a_info = {
4085 .mac = ixgbe_mac_x550em_a,
4086 .get_invariants = &ixgbe_get_invariants_X550_a,
4087 .mac_ops = &mac_ops_x550em_a,
4088 .eeprom_ops = &eeprom_ops_X550EM_x,
4089 .phy_ops = &phy_ops_x550em_a,
4090 .mbx_ops = &mbx_ops_generic,
4091 .mvals = ixgbe_mvals_x550em_a,
4092 };
4093
4094 const struct ixgbe_info ixgbe_x550em_a_fw_info = {
4095 .mac = ixgbe_mac_x550em_a,
4096 .get_invariants = ixgbe_get_invariants_X550_a_fw,
4097 .mac_ops = &mac_ops_x550em_a_fw,
4098 .eeprom_ops = &eeprom_ops_X550EM_x,
4099 .phy_ops = &phy_ops_x550em_a_fw,
4100 .mbx_ops = &mbx_ops_generic,
4101 .mvals = ixgbe_mvals_x550em_a,
4102 };
4103