1 /* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */ 2 /* QLogic qed NIC Driver 3 * Copyright (c) 2015-2017 QLogic Corporation 4 * Copyright (c) 2019-2020 Marvell International Ltd. 5 */ 6 7 #ifndef _QED_MCP_H 8 #define _QED_MCP_H 9 10 #include <linux/types.h> 11 #include <linux/delay.h> 12 #include <linux/slab.h> 13 #include <linux/spinlock.h> 14 #include <linux/qed/qed_fcoe_if.h> 15 #include "qed_hsi.h" 16 #include "qed_dev_api.h" 17 18 #define QED_MFW_REPORT_STR_SIZE 256 19 20 struct qed_mcp_link_speed_params { 21 bool autoneg; 22 23 u32 advertised_speeds; 24 #define QED_EXT_SPEED_MASK_RES 0x1 25 #define QED_EXT_SPEED_MASK_1G 0x2 26 #define QED_EXT_SPEED_MASK_10G 0x4 27 #define QED_EXT_SPEED_MASK_20G 0x8 28 #define QED_EXT_SPEED_MASK_25G 0x10 29 #define QED_EXT_SPEED_MASK_40G 0x20 30 #define QED_EXT_SPEED_MASK_50G_R 0x40 31 #define QED_EXT_SPEED_MASK_50G_R2 0x80 32 #define QED_EXT_SPEED_MASK_100G_R2 0x100 33 #define QED_EXT_SPEED_MASK_100G_R4 0x200 34 #define QED_EXT_SPEED_MASK_100G_P4 0x400 35 36 u32 forced_speed; /* In Mb/s */ 37 #define QED_EXT_SPEED_1G 0x1 38 #define QED_EXT_SPEED_10G 0x2 39 #define QED_EXT_SPEED_20G 0x4 40 #define QED_EXT_SPEED_25G 0x8 41 #define QED_EXT_SPEED_40G 0x10 42 #define QED_EXT_SPEED_50G_R 0x20 43 #define QED_EXT_SPEED_50G_R2 0x40 44 #define QED_EXT_SPEED_100G_R2 0x80 45 #define QED_EXT_SPEED_100G_R4 0x100 46 #define QED_EXT_SPEED_100G_P4 0x200 47 }; 48 49 struct qed_mcp_link_pause_params { 50 bool autoneg; 51 bool forced_rx; 52 bool forced_tx; 53 }; 54 55 enum qed_mcp_eee_mode { 56 QED_MCP_EEE_DISABLED, 57 QED_MCP_EEE_ENABLED, 58 QED_MCP_EEE_UNSUPPORTED 59 }; 60 61 struct qed_mcp_link_params { 62 struct qed_mcp_link_speed_params speed; 63 struct qed_mcp_link_pause_params pause; 64 u32 loopback_mode; 65 struct qed_link_eee_params eee; 66 u32 fec; 67 68 struct qed_mcp_link_speed_params ext_speed; 69 u32 ext_fec_mode; 70 }; 71 72 struct qed_mcp_link_capabilities { 73 u32 speed_capabilities; 74 bool default_speed_autoneg; 75 u32 fec_default; 76 enum qed_mcp_eee_mode default_eee; 77 u32 eee_lpi_timer; 78 u8 eee_speed_caps; 79 80 u32 default_ext_speed_caps; 81 u32 default_ext_autoneg; 82 u32 default_ext_speed; 83 u32 default_ext_fec; 84 }; 85 86 struct qed_mcp_link_state { 87 bool link_up; 88 u32 min_pf_rate; 89 90 /* Actual link speed in Mb/s */ 91 u32 line_speed; 92 93 /* PF max speed in Mb/s, deduced from line_speed 94 * according to PF max bandwidth configuration. 95 */ 96 u32 speed; 97 98 bool full_duplex; 99 bool an; 100 bool an_complete; 101 bool parallel_detection; 102 bool pfc_enabled; 103 104 u32 partner_adv_speed; 105 #define QED_LINK_PARTNER_SPEED_1G_HD BIT(0) 106 #define QED_LINK_PARTNER_SPEED_1G_FD BIT(1) 107 #define QED_LINK_PARTNER_SPEED_10G BIT(2) 108 #define QED_LINK_PARTNER_SPEED_20G BIT(3) 109 #define QED_LINK_PARTNER_SPEED_25G BIT(4) 110 #define QED_LINK_PARTNER_SPEED_40G BIT(5) 111 #define QED_LINK_PARTNER_SPEED_50G BIT(6) 112 #define QED_LINK_PARTNER_SPEED_100G BIT(7) 113 114 bool partner_tx_flow_ctrl_en; 115 bool partner_rx_flow_ctrl_en; 116 117 u8 partner_adv_pause; 118 #define QED_LINK_PARTNER_SYMMETRIC_PAUSE 0x1 119 #define QED_LINK_PARTNER_ASYMMETRIC_PAUSE 0x2 120 #define QED_LINK_PARTNER_BOTH_PAUSE 0x3 121 122 bool sfp_tx_fault; 123 bool eee_active; 124 u8 eee_adv_caps; 125 u8 eee_lp_adv_caps; 126 127 u32 fec_active; 128 }; 129 130 struct qed_mcp_function_info { 131 u8 pause_on_host; 132 133 enum qed_pci_personality protocol; 134 135 u8 bandwidth_min; 136 u8 bandwidth_max; 137 138 u8 mac[ETH_ALEN]; 139 140 u64 wwn_port; 141 u64 wwn_node; 142 143 #define QED_MCP_VLAN_UNSET (0xffff) 144 u16 ovlan; 145 146 u16 mtu; 147 }; 148 149 struct qed_mcp_nvm_common { 150 u32 offset; 151 u32 param; 152 u32 resp; 153 u32 cmd; 154 }; 155 156 struct qed_mcp_drv_version { 157 u32 version; 158 u8 name[MCP_DRV_VER_STR_SIZE - 4]; 159 }; 160 161 struct qed_mcp_lan_stats { 162 u64 ucast_rx_pkts; 163 u64 ucast_tx_pkts; 164 u32 fcs_err; 165 }; 166 167 struct qed_mcp_fcoe_stats { 168 u64 rx_pkts; 169 u64 tx_pkts; 170 u32 fcs_err; 171 u32 login_failure; 172 }; 173 174 struct qed_mcp_iscsi_stats { 175 u64 rx_pdus; 176 u64 tx_pdus; 177 u64 rx_bytes; 178 u64 tx_bytes; 179 }; 180 181 struct qed_mcp_rdma_stats { 182 u64 rx_pkts; 183 u64 tx_pkts; 184 u64 rx_bytes; 185 u64 tx_byts; 186 }; 187 188 enum qed_mcp_protocol_type { 189 QED_MCP_LAN_STATS, 190 QED_MCP_FCOE_STATS, 191 QED_MCP_ISCSI_STATS, 192 QED_MCP_RDMA_STATS 193 }; 194 195 union qed_mcp_protocol_stats { 196 struct qed_mcp_lan_stats lan_stats; 197 struct qed_mcp_fcoe_stats fcoe_stats; 198 struct qed_mcp_iscsi_stats iscsi_stats; 199 struct qed_mcp_rdma_stats rdma_stats; 200 }; 201 202 enum qed_ov_eswitch { 203 QED_OV_ESWITCH_NONE, 204 QED_OV_ESWITCH_VEB, 205 QED_OV_ESWITCH_VEPA 206 }; 207 208 enum qed_ov_client { 209 QED_OV_CLIENT_DRV, 210 QED_OV_CLIENT_USER, 211 QED_OV_CLIENT_VENDOR_SPEC 212 }; 213 214 enum qed_ov_driver_state { 215 QED_OV_DRIVER_STATE_NOT_LOADED, 216 QED_OV_DRIVER_STATE_DISABLED, 217 QED_OV_DRIVER_STATE_ACTIVE 218 }; 219 220 enum qed_ov_wol { 221 QED_OV_WOL_DEFAULT, 222 QED_OV_WOL_DISABLED, 223 QED_OV_WOL_ENABLED 224 }; 225 226 enum qed_mfw_tlv_type { 227 QED_MFW_TLV_GENERIC = 0x1, /* Core driver TLVs */ 228 QED_MFW_TLV_ETH = 0x2, /* L2 driver TLVs */ 229 QED_MFW_TLV_FCOE = 0x4, /* FCoE protocol TLVs */ 230 QED_MFW_TLV_ISCSI = 0x8, /* SCSI protocol TLVs */ 231 QED_MFW_TLV_MAX = 0x16, 232 }; 233 234 struct qed_mfw_tlv_generic { 235 #define QED_MFW_TLV_FLAGS_SIZE 2 236 struct { 237 u8 ipv4_csum_offload; 238 u8 lso_supported; 239 bool b_set; 240 } flags; 241 242 #define QED_MFW_TLV_MAC_COUNT 3 243 /* First entry for primary MAC, 2 secondary MACs possible */ 244 u8 mac[QED_MFW_TLV_MAC_COUNT][6]; 245 bool mac_set[QED_MFW_TLV_MAC_COUNT]; 246 247 u64 rx_frames; 248 bool rx_frames_set; 249 u64 rx_bytes; 250 bool rx_bytes_set; 251 u64 tx_frames; 252 bool tx_frames_set; 253 u64 tx_bytes; 254 bool tx_bytes_set; 255 }; 256 257 union qed_mfw_tlv_data { 258 struct qed_mfw_tlv_generic generic; 259 struct qed_mfw_tlv_eth eth; 260 struct qed_mfw_tlv_fcoe fcoe; 261 struct qed_mfw_tlv_iscsi iscsi; 262 }; 263 264 #define QED_NVM_CFG_OPTION_ALL BIT(0) 265 #define QED_NVM_CFG_OPTION_INIT BIT(1) 266 #define QED_NVM_CFG_OPTION_COMMIT BIT(2) 267 #define QED_NVM_CFG_OPTION_FREE BIT(3) 268 #define QED_NVM_CFG_OPTION_ENTITY_SEL BIT(4) 269 270 /** 271 * qed_mcp_get_link_params(): Returns the link params of the hw function. 272 * 273 * @p_hwfn: HW device data. 274 * 275 * Returns: Pointer to link params. 276 */ 277 struct qed_mcp_link_params *qed_mcp_get_link_params(struct qed_hwfn *p_hwfn); 278 279 /** 280 * qed_mcp_get_link_state(): Return the link state of the hw function. 281 * 282 * @p_hwfn: HW device data. 283 * 284 * Returns: Pointer to link state. 285 */ 286 struct qed_mcp_link_state *qed_mcp_get_link_state(struct qed_hwfn *p_hwfn); 287 288 /** 289 * qed_mcp_get_link_capabilities(): Return the link capabilities of the 290 * hw function. 291 * 292 * @p_hwfn: HW device data. 293 * 294 * Returns: Pointer to link capabilities. 295 */ 296 struct qed_mcp_link_capabilities 297 *qed_mcp_get_link_capabilities(struct qed_hwfn *p_hwfn); 298 299 /** 300 * qed_mcp_set_link(): Request the MFW to set the link according 301 * to 'link_input'. 302 * 303 * @p_hwfn: HW device data. 304 * @p_ptt: P_ptt. 305 * @b_up: Raise link if `true'. Reset link if `false'. 306 * 307 * Return: Int. 308 */ 309 int qed_mcp_set_link(struct qed_hwfn *p_hwfn, 310 struct qed_ptt *p_ptt, 311 bool b_up); 312 313 /** 314 * qed_mcp_get_mfw_ver(): Get the management firmware version value. 315 * 316 * @p_hwfn: HW device data. 317 * @p_ptt: P_ptt. 318 * @p_mfw_ver: MFW version value. 319 * @p_running_bundle_id: Image id in nvram; Optional. 320 * 321 * Return: Int - 0 - operation was successful. 322 */ 323 int qed_mcp_get_mfw_ver(struct qed_hwfn *p_hwfn, 324 struct qed_ptt *p_ptt, 325 u32 *p_mfw_ver, u32 *p_running_bundle_id); 326 327 /** 328 * qed_mcp_get_mbi_ver(): Get the MBI version value. 329 * 330 * @p_hwfn: HW device data. 331 * @p_ptt: P_ptt. 332 * @p_mbi_ver: A pointer to a variable to be filled with the MBI version. 333 * 334 * Return: Int - 0 - operation was successful. 335 */ 336 int qed_mcp_get_mbi_ver(struct qed_hwfn *p_hwfn, 337 struct qed_ptt *p_ptt, u32 *p_mbi_ver); 338 339 /** 340 * qed_mcp_get_media_type(): Get media type value of the port. 341 * 342 * @p_hwfn: HW device data. 343 * @p_ptt: P_ptt. 344 * @media_type: Media type value 345 * 346 * Return: Int - 0 - Operation was successul. 347 * -EBUSY - Operation failed 348 */ 349 int qed_mcp_get_media_type(struct qed_hwfn *p_hwfn, 350 struct qed_ptt *p_ptt, u32 *media_type); 351 352 /** 353 * qed_mcp_get_transceiver_data(): Get transceiver data of the port. 354 * 355 * @p_hwfn: HW device data. 356 * @p_ptt: P_ptt. 357 * @p_transceiver_state: Transceiver state. 358 * @p_tranceiver_type: Media type value. 359 * 360 * Return: Int - 0 - Operation was successul. 361 * -EBUSY - Operation failed 362 */ 363 int qed_mcp_get_transceiver_data(struct qed_hwfn *p_hwfn, 364 struct qed_ptt *p_ptt, 365 u32 *p_transceiver_state, 366 u32 *p_tranceiver_type); 367 368 /** 369 * qed_mcp_trans_speed_mask(): Get transceiver supported speed mask. 370 * 371 * @p_hwfn: HW device data. 372 * @p_ptt: P_ptt. 373 * @p_speed_mask: Bit mask of all supported speeds. 374 * 375 * Return: Int - 0 - Operation was successul. 376 * -EBUSY - Operation failed 377 */ 378 379 int qed_mcp_trans_speed_mask(struct qed_hwfn *p_hwfn, 380 struct qed_ptt *p_ptt, u32 *p_speed_mask); 381 382 /** 383 * qed_mcp_get_board_config(): Get board configuration. 384 * 385 * @p_hwfn: HW device data. 386 * @p_ptt: P_ptt. 387 * @p_board_config: Board config. 388 * 389 * Return: Int - 0 - Operation was successul. 390 * -EBUSY - Operation failed 391 */ 392 int qed_mcp_get_board_config(struct qed_hwfn *p_hwfn, 393 struct qed_ptt *p_ptt, u32 *p_board_config); 394 395 /** 396 * qed_mcp_cmd(): Sleepable function for sending commands to the MCP 397 * mailbox. It acquire mutex lock for the entire 398 * operation, from sending the request until the MCP 399 * response. Waiting for MCP response will be checked up 400 * to 5 seconds every 10ms. Should not be called from atomic 401 * context. 402 * 403 * @p_hwfn: HW device data. 404 * @p_ptt: PTT required for register access. 405 * @cmd: command to be sent to the MCP. 406 * @param: Optional param 407 * @o_mcp_resp: The MCP response code (exclude sequence). 408 * @o_mcp_param: Optional parameter provided by the MCP 409 * response 410 * 411 * Return: Int - 0 - Operation was successul. 412 */ 413 int qed_mcp_cmd(struct qed_hwfn *p_hwfn, 414 struct qed_ptt *p_ptt, 415 u32 cmd, 416 u32 param, 417 u32 *o_mcp_resp, 418 u32 *o_mcp_param); 419 420 /** 421 * qed_mcp_cmd_nosleep(): Function for sending commands to the MCP 422 * mailbox. It acquire mutex lock for the entire 423 * operation, from sending the request until the MCP 424 * response. Waiting for MCP response will be checked up 425 * to 5 seconds every 10us. Should be called when sleep 426 * is not allowed. 427 * 428 * @p_hwfn: HW device data. 429 * @p_ptt: PTT required for register access. 430 * @cmd: command to be sent to the MCP. 431 * @param: Optional param 432 * @o_mcp_resp: The MCP response code (exclude sequence). 433 * @o_mcp_param: Optional parameter provided by the MCP 434 * response 435 * 436 * Return: Int - 0 - Operation was successul. 437 */ 438 int qed_mcp_cmd_nosleep(struct qed_hwfn *p_hwfn, 439 struct qed_ptt *p_ptt, 440 u32 cmd, 441 u32 param, 442 u32 *o_mcp_resp, 443 u32 *o_mcp_param); 444 445 /** 446 * qed_mcp_drain(): drains the nig, allowing completion to pass in 447 * case of pauses. 448 * (Should be called only from sleepable context) 449 * 450 * @p_hwfn: HW device data. 451 * @p_ptt: PTT required for register access. 452 * 453 * Return: Int. 454 */ 455 int qed_mcp_drain(struct qed_hwfn *p_hwfn, 456 struct qed_ptt *p_ptt); 457 458 /** 459 * qed_mcp_get_flash_size(): Get the flash size value. 460 * 461 * @p_hwfn: HW device data. 462 * @p_ptt: PTT required for register access. 463 * @p_flash_size: Flash size in bytes to be filled. 464 * 465 * Return: Int - 0 - Operation was successul. 466 */ 467 int qed_mcp_get_flash_size(struct qed_hwfn *p_hwfn, 468 struct qed_ptt *p_ptt, 469 u32 *p_flash_size); 470 471 /** 472 * qed_mcp_send_drv_version(): Send driver version to MFW. 473 * 474 * @p_hwfn: HW device data. 475 * @p_ptt: PTT required for register access. 476 * @p_ver: Version value. 477 * 478 * Return: Int - 0 - Operation was successul. 479 */ 480 int 481 qed_mcp_send_drv_version(struct qed_hwfn *p_hwfn, 482 struct qed_ptt *p_ptt, 483 struct qed_mcp_drv_version *p_ver); 484 485 /** 486 * qed_get_process_kill_counter(): Read the MFW process kill counter. 487 * 488 * @p_hwfn: HW device data. 489 * @p_ptt: PTT required for register access. 490 * 491 * Return: u32. 492 */ 493 u32 qed_get_process_kill_counter(struct qed_hwfn *p_hwfn, 494 struct qed_ptt *p_ptt); 495 496 /** 497 * qed_start_recovery_process(): Trigger a recovery process. 498 * 499 * @p_hwfn: HW device data. 500 * @p_ptt: PTT required for register access. 501 * 502 * Return: Int. 503 */ 504 int qed_start_recovery_process(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt); 505 506 /** 507 * qed_recovery_prolog(): A recovery handler must call this function 508 * as its first step. 509 * It is assumed that the handler is not run from 510 * an interrupt context. 511 * 512 * @cdev: Qed dev pointer. 513 * 514 * Return: int. 515 */ 516 int qed_recovery_prolog(struct qed_dev *cdev); 517 518 /** 519 * qed_mcp_ov_update_current_config(): Notify MFW about the change in base 520 * device properties 521 * 522 * @p_hwfn: HW device data. 523 * @p_ptt: P_ptt. 524 * @client: Qed client type. 525 * 526 * Return: Int - 0 - Operation was successul. 527 */ 528 int qed_mcp_ov_update_current_config(struct qed_hwfn *p_hwfn, 529 struct qed_ptt *p_ptt, 530 enum qed_ov_client client); 531 532 /** 533 * qed_mcp_ov_update_driver_state(): Notify MFW about the driver state. 534 * 535 * @p_hwfn: HW device data. 536 * @p_ptt: P_ptt. 537 * @drv_state: Driver state. 538 * 539 * Return: Int - 0 - Operation was successul. 540 */ 541 int qed_mcp_ov_update_driver_state(struct qed_hwfn *p_hwfn, 542 struct qed_ptt *p_ptt, 543 enum qed_ov_driver_state drv_state); 544 545 /** 546 * qed_mcp_ov_update_mtu(): Send MTU size to MFW. 547 * 548 * @p_hwfn: HW device data. 549 * @p_ptt: P_ptt. 550 * @mtu: MTU size. 551 * 552 * Return: Int - 0 - Operation was successul. 553 */ 554 int qed_mcp_ov_update_mtu(struct qed_hwfn *p_hwfn, 555 struct qed_ptt *p_ptt, u16 mtu); 556 557 /** 558 * qed_mcp_ov_update_mac(): Send MAC address to MFW. 559 * 560 * @p_hwfn: HW device data. 561 * @p_ptt: P_ptt. 562 * @mac: MAC address. 563 * 564 * Return: Int - 0 - Operation was successul. 565 */ 566 int qed_mcp_ov_update_mac(struct qed_hwfn *p_hwfn, 567 struct qed_ptt *p_ptt, const u8 *mac); 568 569 /** 570 * qed_mcp_ov_update_wol(): Send WOL mode to MFW. 571 * 572 * @p_hwfn: HW device data. 573 * @p_ptt: P_ptt. 574 * @wol: WOL mode. 575 * 576 * Return: Int - 0 - Operation was successul. 577 */ 578 int qed_mcp_ov_update_wol(struct qed_hwfn *p_hwfn, 579 struct qed_ptt *p_ptt, 580 enum qed_ov_wol wol); 581 582 /** 583 * qed_mcp_set_led(): Set LED status. 584 * 585 * @p_hwfn: HW device data. 586 * @p_ptt: P_ptt. 587 * @mode: LED mode. 588 * 589 * Return: Int - 0 - Operation was successul. 590 */ 591 int qed_mcp_set_led(struct qed_hwfn *p_hwfn, 592 struct qed_ptt *p_ptt, 593 enum qed_led_mode mode); 594 595 /** 596 * qed_mcp_nvm_read(): Read from NVM. 597 * 598 * @cdev: Qed dev pointer. 599 * @addr: NVM offset. 600 * @p_buf: NVM read buffer. 601 * @len: Buffer len. 602 * 603 * Return: Int - 0 - Operation was successul. 604 */ 605 int qed_mcp_nvm_read(struct qed_dev *cdev, u32 addr, u8 *p_buf, u32 len); 606 607 /** 608 * qed_mcp_nvm_write(): Write to NVM. 609 * 610 * @cdev: Qed dev pointer. 611 * @addr: NVM offset. 612 * @cmd: NVM command. 613 * @p_buf: NVM write buffer. 614 * @len: Buffer len. 615 * 616 * Return: Int - 0 - Operation was successul. 617 */ 618 int qed_mcp_nvm_write(struct qed_dev *cdev, 619 u32 cmd, u32 addr, u8 *p_buf, u32 len); 620 621 /** 622 * qed_mcp_nvm_resp(): Check latest response. 623 * 624 * @cdev: Qed dev pointer. 625 * @p_buf: NVM write buffer. 626 * 627 * Return: Int - 0 - Operation was successul. 628 */ 629 int qed_mcp_nvm_resp(struct qed_dev *cdev, u8 *p_buf); 630 631 struct qed_nvm_image_att { 632 u32 start_addr; 633 u32 length; 634 }; 635 636 /** 637 * qed_mcp_get_nvm_image_att(): Allows reading a whole nvram image. 638 * 639 * @p_hwfn: HW device data. 640 * @image_id: Image to get attributes for. 641 * @p_image_att: Image attributes structure into which to fill data. 642 * 643 * Return: Int - 0 - Operation was successul. 644 */ 645 int 646 qed_mcp_get_nvm_image_att(struct qed_hwfn *p_hwfn, 647 enum qed_nvm_images image_id, 648 struct qed_nvm_image_att *p_image_att); 649 650 /** 651 * qed_mcp_get_nvm_image(): Allows reading a whole nvram image. 652 * 653 * @p_hwfn: HW device data. 654 * @image_id: image requested for reading. 655 * @p_buffer: allocated buffer into which to fill data. 656 * @buffer_len: length of the allocated buffer. 657 * 658 * Return: 0 if p_buffer now contains the nvram image. 659 */ 660 int qed_mcp_get_nvm_image(struct qed_hwfn *p_hwfn, 661 enum qed_nvm_images image_id, 662 u8 *p_buffer, u32 buffer_len); 663 664 /** 665 * qed_mcp_bist_register_test(): Bist register test. 666 * 667 * @p_hwfn: HW device data. 668 * @p_ptt: PTT required for register access. 669 * 670 * Return: Int - 0 - Operation was successul. 671 */ 672 int qed_mcp_bist_register_test(struct qed_hwfn *p_hwfn, 673 struct qed_ptt *p_ptt); 674 675 /** 676 * qed_mcp_bist_clock_test(): Bist clock test. 677 * 678 * @p_hwfn: HW device data. 679 * @p_ptt: PTT required for register access. 680 * 681 * Return: Int - 0 - Operation was successul. 682 */ 683 int qed_mcp_bist_clock_test(struct qed_hwfn *p_hwfn, 684 struct qed_ptt *p_ptt); 685 686 /** 687 * qed_mcp_bist_nvm_get_num_images(): Bist nvm test - get number of images. 688 * 689 * @p_hwfn: HW device data. 690 * @p_ptt: PTT required for register access. 691 * @num_images: number of images if operation was 692 * successful. 0 if not. 693 * 694 * Return: Int - 0 - Operation was successul. 695 */ 696 int qed_mcp_bist_nvm_get_num_images(struct qed_hwfn *p_hwfn, 697 struct qed_ptt *p_ptt, 698 u32 *num_images); 699 700 /** 701 * qed_mcp_bist_nvm_get_image_att(): Bist nvm test - get image attributes 702 * by index. 703 * 704 * @p_hwfn: HW device data. 705 * @p_ptt: PTT required for register access. 706 * @p_image_att: Attributes of image. 707 * @image_index: Index of image to get information for. 708 * 709 * Return: Int - 0 - Operation was successul. 710 */ 711 int qed_mcp_bist_nvm_get_image_att(struct qed_hwfn *p_hwfn, 712 struct qed_ptt *p_ptt, 713 struct bist_nvm_image_att *p_image_att, 714 u32 image_index); 715 716 /** 717 * qed_mfw_process_tlv_req(): Processes the TLV request from MFW i.e., 718 * get the required TLV info 719 * from the qed client and send it to the MFW. 720 * 721 * @p_hwfn: HW device data. 722 * @p_ptt: P_ptt. 723 * 724 * Return: 0 upon success. 725 */ 726 int qed_mfw_process_tlv_req(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt); 727 728 /** 729 * qed_mcp_send_raw_debug_data(): Send raw debug data to the MFW 730 * 731 * @p_hwfn: HW device data. 732 * @p_ptt: P_ptt. 733 * @p_buf: raw debug data buffer. 734 * @size: Buffer size. 735 * 736 * Return : Int. 737 */ 738 int 739 qed_mcp_send_raw_debug_data(struct qed_hwfn *p_hwfn, 740 struct qed_ptt *p_ptt, u8 *p_buf, u32 size); 741 742 /* Using hwfn number (and not pf_num) is required since in CMT mode, 743 * same pf_num may be used by two different hwfn 744 * TODO - this shouldn't really be in .h file, but until all fields 745 * required during hw-init will be placed in their correct place in shmem 746 * we need it in qed_dev.c [for readin the nvram reflection in shmem]. 747 */ 748 #define MCP_PF_ID_BY_REL(p_hwfn, rel_pfid) (QED_IS_BB((p_hwfn)->cdev) ? \ 749 ((rel_pfid) | \ 750 ((p_hwfn)->abs_pf_id & 1) << 3) : \ 751 rel_pfid) 752 #define MCP_PF_ID(p_hwfn) MCP_PF_ID_BY_REL(p_hwfn, (p_hwfn)->rel_pf_id) 753 754 struct qed_mcp_info { 755 /* List for mailbox commands which were sent and wait for a response */ 756 struct list_head cmd_list; 757 758 /* Spinlock used for protecting the access to the mailbox commands list 759 * and the sending of the commands. 760 */ 761 spinlock_t cmd_lock; 762 763 /* Flag to indicate whether sending a MFW mailbox command is blocked */ 764 bool b_block_cmd; 765 766 /* Spinlock used for syncing SW link-changes and link-changes 767 * originating from attention context. 768 */ 769 spinlock_t link_lock; 770 771 u32 public_base; 772 u32 drv_mb_addr; 773 u32 mfw_mb_addr; 774 u32 port_addr; 775 u16 drv_mb_seq; 776 u16 drv_pulse_seq; 777 struct qed_mcp_link_params link_input; 778 struct qed_mcp_link_state link_output; 779 struct qed_mcp_link_capabilities link_capabilities; 780 struct qed_mcp_function_info func_info; 781 u8 *mfw_mb_cur; 782 u8 *mfw_mb_shadow; 783 u16 mfw_mb_length; 784 u32 mcp_hist; 785 786 /* Capabilties negotiated with the MFW */ 787 u32 capabilities; 788 789 /* S/N for debug data mailbox commands */ 790 atomic_t dbg_data_seq; 791 792 /* Spinlock used to sync the flag mcp_handling_status with 793 * the mfw events handler 794 */ 795 spinlock_t unload_lock; 796 unsigned long mcp_handling_status; 797 #define QED_MCP_BYPASS_PROC_BIT 0 798 #define QED_MCP_IN_PROCESSING_BIT 1 799 }; 800 801 struct qed_mcp_mb_params { 802 u32 cmd; 803 u32 param; 804 void *p_data_src; 805 void *p_data_dst; 806 u8 data_src_size; 807 u8 data_dst_size; 808 u32 mcp_resp; 809 u32 mcp_param; 810 u32 flags; 811 #define QED_MB_FLAG_CAN_SLEEP (0x1 << 0) 812 #define QED_MB_FLAG_AVOID_BLOCK (0x1 << 1) 813 #define QED_MB_FLAGS_IS_SET(params, flag) \ 814 ({ typeof(params) __params = (params); \ 815 (__params && (__params->flags & QED_MB_FLAG_ ## flag)); }) 816 }; 817 818 struct qed_drv_tlv_hdr { 819 u8 tlv_type; 820 u8 tlv_length; /* In dwords - not including this header */ 821 u8 tlv_reserved; 822 #define QED_DRV_TLV_FLAGS_CHANGED 0x01 823 u8 tlv_flags; 824 }; 825 826 /** 827 * qed_mcp_is_ext_speed_supported() - Check if management firmware supports 828 * extended speeds. 829 * @p_hwfn: HW device data. 830 * 831 * Return: true if supported, false otherwise. 832 */ 833 static inline bool qed_mcp_is_ext_speed_supported(const struct qed_hwfn * p_hwfn)834 qed_mcp_is_ext_speed_supported(const struct qed_hwfn *p_hwfn) 835 { 836 return !!(p_hwfn->mcp_info->capabilities & 837 FW_MB_PARAM_FEATURE_SUPPORT_EXT_SPEED_FEC_CONTROL); 838 } 839 840 /** 841 * qed_mcp_cmd_init(): Initialize the interface with the MCP. 842 * 843 * @p_hwfn: HW device data. 844 * @p_ptt: PTT required for register access. 845 * 846 * Return: Int. 847 */ 848 int qed_mcp_cmd_init(struct qed_hwfn *p_hwfn, 849 struct qed_ptt *p_ptt); 850 851 /** 852 * qed_mcp_cmd_port_init(): Initialize the port interface with the MCP 853 * 854 * @p_hwfn: HW device data. 855 * @p_ptt: P_ptt. 856 * 857 * Return: Void. 858 * 859 * Can only be called after `num_ports_in_engines' is set 860 */ 861 void qed_mcp_cmd_port_init(struct qed_hwfn *p_hwfn, 862 struct qed_ptt *p_ptt); 863 /** 864 * qed_mcp_free(): Releases resources allocated during the init process. 865 * 866 * @p_hwfn: HW function. 867 * 868 * Return: Int. 869 */ 870 871 int qed_mcp_free(struct qed_hwfn *p_hwfn); 872 873 /** 874 * qed_mcp_handle_events(): This function is called from the DPC context. 875 * After pointing PTT to the mfw mb, check for events sent by 876 * the MCP to the driver and ack them. In case a critical event 877 * detected, it will be handled here, otherwise the work will be 878 * queued to a sleepable work-queue. 879 * 880 * @p_hwfn: HW function. 881 * @p_ptt: PTT required for register access. 882 * 883 * Return: Int - 0 - Operation was successul. 884 */ 885 int qed_mcp_handle_events(struct qed_hwfn *p_hwfn, 886 struct qed_ptt *p_ptt); 887 888 enum qed_drv_role { 889 QED_DRV_ROLE_OS, 890 QED_DRV_ROLE_KDUMP, 891 }; 892 893 struct qed_load_req_params { 894 /* Input params */ 895 enum qed_drv_role drv_role; 896 u8 timeout_val; 897 bool avoid_eng_reset; 898 enum qed_override_force_load override_force_load; 899 900 /* Output params */ 901 u32 load_code; 902 }; 903 904 /** 905 * qed_mcp_load_req(): Sends a LOAD_REQ to the MFW, and in case the 906 * operation succeeds, returns whether this PF is 907 * the first on the engine/port or function. 908 * 909 * @p_hwfn: HW device data. 910 * @p_ptt: P_ptt. 911 * @p_params: Params. 912 * 913 * Return: Int - 0 - Operation was successul. 914 */ 915 int qed_mcp_load_req(struct qed_hwfn *p_hwfn, 916 struct qed_ptt *p_ptt, 917 struct qed_load_req_params *p_params); 918 919 /** 920 * qed_mcp_load_done(): Sends a LOAD_DONE message to the MFW. 921 * 922 * @p_hwfn: HW device data. 923 * @p_ptt: P_ptt. 924 * 925 * Return: Int - 0 - Operation was successul. 926 */ 927 int qed_mcp_load_done(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt); 928 929 /** 930 * qed_mcp_unload_req(): Sends a UNLOAD_REQ message to the MFW. 931 * 932 * @p_hwfn: HW device data. 933 * @p_ptt: P_ptt. 934 * 935 * Return: Int - 0 - Operation was successul. 936 */ 937 int qed_mcp_unload_req(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt); 938 939 /** 940 * qed_mcp_unload_done(): Sends a UNLOAD_DONE message to the MFW 941 * 942 * @p_hwfn: HW device data. 943 * @p_ptt: P_ptt. 944 * 945 * Return: Int - 0 - Operation was successul. 946 */ 947 int qed_mcp_unload_done(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt); 948 949 /** 950 * qed_mcp_read_mb(): Read the MFW mailbox into Current buffer. 951 * 952 * @p_hwfn: HW device data. 953 * @p_ptt: P_ptt. 954 * 955 * Return: Void. 956 */ 957 void qed_mcp_read_mb(struct qed_hwfn *p_hwfn, 958 struct qed_ptt *p_ptt); 959 960 /** 961 * qed_mcp_ack_vf_flr(): Ack to mfw that driver finished FLR process for VFs 962 * 963 * @p_hwfn: HW device data. 964 * @p_ptt: P_ptt. 965 * @vfs_to_ack: bit mask of all engine VFs for which the PF acks. 966 * 967 * Return: Int - 0 - Operation was successul. 968 */ 969 int qed_mcp_ack_vf_flr(struct qed_hwfn *p_hwfn, 970 struct qed_ptt *p_ptt, u32 *vfs_to_ack); 971 972 /** 973 * qed_mcp_fill_shmem_func_info(): Calls during init to read shmem of 974 * all function-related info. 975 * 976 * @p_hwfn: HW device data. 977 * @p_ptt: P_ptt. 978 * 979 * Return: 0 upon success. 980 */ 981 int qed_mcp_fill_shmem_func_info(struct qed_hwfn *p_hwfn, 982 struct qed_ptt *p_ptt); 983 984 /** 985 * qed_mcp_reset(): Reset the MCP using mailbox command. 986 * 987 * @p_hwfn: HW device data. 988 * @p_ptt: P_ptt. 989 * 990 * Return: 0 upon success. 991 */ 992 int qed_mcp_reset(struct qed_hwfn *p_hwfn, 993 struct qed_ptt *p_ptt); 994 995 /** 996 * qed_mcp_nvm_rd_cmd(): Sends an NVM read command request to the MFW to get 997 * a buffer. 998 * 999 * @p_hwfn: HW device data. 1000 * @p_ptt: P_ptt. 1001 * @cmd: (Command) DRV_MSG_CODE_NVM_GET_FILE_DATA or 1002 * DRV_MSG_CODE_NVM_READ_NVRAM commands. 1003 * @param: [0:23] - Offset [24:31] - Size. 1004 * @o_mcp_resp: MCP response. 1005 * @o_mcp_param: MCP response param. 1006 * @o_txn_size: Buffer size output. 1007 * @o_buf: Pointer to the buffer returned by the MFW. 1008 * @b_can_sleep: Can sleep. 1009 * 1010 * Return: 0 upon success. 1011 */ 1012 int qed_mcp_nvm_rd_cmd(struct qed_hwfn *p_hwfn, 1013 struct qed_ptt *p_ptt, 1014 u32 cmd, 1015 u32 param, 1016 u32 *o_mcp_resp, 1017 u32 *o_mcp_param, 1018 u32 *o_txn_size, u32 *o_buf, bool b_can_sleep); 1019 1020 /** 1021 * qed_mcp_phy_sfp_read(): Read from sfp. 1022 * 1023 * @p_hwfn: HW device data. 1024 * @p_ptt: PTT required for register access. 1025 * @port: transceiver port. 1026 * @addr: I2C address. 1027 * @offset: offset in sfp. 1028 * @len: buffer length. 1029 * @p_buf: buffer to read into. 1030 * 1031 * Return: Int - 0 - Operation was successul. 1032 */ 1033 int qed_mcp_phy_sfp_read(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, 1034 u32 port, u32 addr, u32 offset, u32 len, u8 *p_buf); 1035 1036 /** 1037 * qed_mcp_is_init(): indicates whether the MFW objects [under mcp_info] 1038 * are accessible 1039 * 1040 * @p_hwfn: HW device data. 1041 * 1042 * Return: true if MFW is running and mcp_info is initialized. 1043 */ 1044 bool qed_mcp_is_init(struct qed_hwfn *p_hwfn); 1045 1046 /** 1047 * qed_mcp_config_vf_msix(): Request MFW to configure MSI-X for a VF. 1048 * 1049 * @p_hwfn: HW device data. 1050 * @p_ptt: P_ptt. 1051 * @vf_id: absolute inside engine. 1052 * @num: number of entries to request. 1053 * 1054 * Return: Int. 1055 */ 1056 int qed_mcp_config_vf_msix(struct qed_hwfn *p_hwfn, 1057 struct qed_ptt *p_ptt, u8 vf_id, u8 num); 1058 1059 /** 1060 * qed_mcp_halt(): Halt the MCP. 1061 * 1062 * @p_hwfn: HW device data. 1063 * @p_ptt: P_ptt. 1064 * 1065 * Return: 0 upon success. 1066 */ 1067 int qed_mcp_halt(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt); 1068 1069 /** 1070 * qed_mcp_resume: Wake up the MCP. 1071 * 1072 * @p_hwfn: HW device data. 1073 * @p_ptt: P_ptt. 1074 * 1075 * Return: 0 upon success. 1076 */ 1077 int qed_mcp_resume(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt); 1078 1079 int qed_configure_pf_min_bandwidth(struct qed_dev *cdev, u8 min_bw); 1080 int qed_configure_pf_max_bandwidth(struct qed_dev *cdev, u8 max_bw); 1081 int __qed_configure_pf_max_bandwidth(struct qed_hwfn *p_hwfn, 1082 struct qed_ptt *p_ptt, 1083 struct qed_mcp_link_state *p_link, 1084 u8 max_bw); 1085 int __qed_configure_pf_min_bandwidth(struct qed_hwfn *p_hwfn, 1086 struct qed_ptt *p_ptt, 1087 struct qed_mcp_link_state *p_link, 1088 u8 min_bw); 1089 1090 int qed_mcp_mask_parities(struct qed_hwfn *p_hwfn, 1091 struct qed_ptt *p_ptt, u32 mask_parities); 1092 1093 /* qed_mcp_mdump_get_retain(): Gets the mdump retained data from the MFW. 1094 * 1095 * @p_hwfn: HW device data. 1096 * @p_ptt: P_ptt. 1097 * @p_mdump_retain: mdump retain. 1098 * 1099 * Return: Int - 0 - Operation was successul. 1100 */ 1101 int 1102 qed_mcp_mdump_get_retain(struct qed_hwfn *p_hwfn, 1103 struct qed_ptt *p_ptt, 1104 struct mdump_retain_data_stc *p_mdump_retain); 1105 1106 /** 1107 * qed_mcp_set_resc_max_val(): Sets the MFW's max value for the given resource. 1108 * 1109 * @p_hwfn: HW device data. 1110 * @p_ptt: P_ptt. 1111 * @res_id: RES ID. 1112 * @resc_max_val: Resec max val. 1113 * @p_mcp_resp: MCP Resp 1114 * 1115 * Return: Int - 0 - Operation was successul. 1116 */ 1117 int 1118 qed_mcp_set_resc_max_val(struct qed_hwfn *p_hwfn, 1119 struct qed_ptt *p_ptt, 1120 enum qed_resources res_id, 1121 u32 resc_max_val, u32 *p_mcp_resp); 1122 1123 /** 1124 * qed_mcp_get_resc_info(): Gets the MFW allocation info for the given 1125 * resource. 1126 * 1127 * @p_hwfn: HW device data. 1128 * @p_ptt: P_ptt. 1129 * @res_id: Res ID. 1130 * @p_mcp_resp: MCP resp. 1131 * @p_resc_num: Resc num. 1132 * @p_resc_start: Resc start. 1133 * 1134 * Return: Int - 0 - Operation was successul. 1135 */ 1136 int 1137 qed_mcp_get_resc_info(struct qed_hwfn *p_hwfn, 1138 struct qed_ptt *p_ptt, 1139 enum qed_resources res_id, 1140 u32 *p_mcp_resp, u32 *p_resc_num, u32 *p_resc_start); 1141 1142 /** 1143 * qed_mcp_ov_update_eswitch(): Send eswitch mode to MFW. 1144 * 1145 * @p_hwfn: HW device data. 1146 * @p_ptt: P_ptt. 1147 * @eswitch: eswitch mode. 1148 * 1149 * Return: Int - 0 - Operation was successul. 1150 */ 1151 int qed_mcp_ov_update_eswitch(struct qed_hwfn *p_hwfn, 1152 struct qed_ptt *p_ptt, 1153 enum qed_ov_eswitch eswitch); 1154 1155 #define QED_MCP_RESC_LOCK_MIN_VAL RESOURCE_DUMP 1156 #define QED_MCP_RESC_LOCK_MAX_VAL 31 1157 1158 enum qed_resc_lock { 1159 QED_RESC_LOCK_DBG_DUMP = QED_MCP_RESC_LOCK_MIN_VAL, 1160 QED_RESC_LOCK_PTP_PORT0, 1161 QED_RESC_LOCK_PTP_PORT1, 1162 QED_RESC_LOCK_PTP_PORT2, 1163 QED_RESC_LOCK_PTP_PORT3, 1164 QED_RESC_LOCK_RESC_ALLOC = QED_MCP_RESC_LOCK_MAX_VAL, 1165 QED_RESC_LOCK_RESC_INVALID 1166 }; 1167 1168 /** 1169 * qed_mcp_initiate_pf_flr(): Initiates PF FLR. 1170 * 1171 * @p_hwfn: HW device data. 1172 * @p_ptt: P_ptt. 1173 * 1174 * Return: Int - 0 - Operation was successul. 1175 */ 1176 int qed_mcp_initiate_pf_flr(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt); 1177 struct qed_resc_lock_params { 1178 /* Resource number [valid values are 0..31] */ 1179 u8 resource; 1180 1181 /* Lock timeout value in seconds [default, none or 1..254] */ 1182 u8 timeout; 1183 #define QED_MCP_RESC_LOCK_TO_DEFAULT 0 1184 #define QED_MCP_RESC_LOCK_TO_NONE 255 1185 1186 /* Number of times to retry locking */ 1187 u8 retry_num; 1188 #define QED_MCP_RESC_LOCK_RETRY_CNT_DFLT 10 1189 1190 /* The interval in usec between retries */ 1191 u16 retry_interval; 1192 #define QED_MCP_RESC_LOCK_RETRY_VAL_DFLT 10000 1193 1194 /* Use sleep or delay between retries */ 1195 bool sleep_b4_retry; 1196 1197 /* Will be set as true if the resource is free and granted */ 1198 bool b_granted; 1199 1200 /* Will be filled with the resource owner. 1201 * [0..15 = PF0-15, 16 = MFW] 1202 */ 1203 u8 owner; 1204 }; 1205 1206 /** 1207 * qed_mcp_resc_lock(): Acquires MFW generic resource lock. 1208 * 1209 * @p_hwfn: HW device data. 1210 * @p_ptt: P_ptt. 1211 * @p_params: Params. 1212 * 1213 * Return: Int - 0 - Operation was successul. 1214 */ 1215 int 1216 qed_mcp_resc_lock(struct qed_hwfn *p_hwfn, 1217 struct qed_ptt *p_ptt, struct qed_resc_lock_params *p_params); 1218 1219 struct qed_resc_unlock_params { 1220 /* Resource number [valid values are 0..31] */ 1221 u8 resource; 1222 1223 /* Allow to release a resource even if belongs to another PF */ 1224 bool b_force; 1225 1226 /* Will be set as true if the resource is released */ 1227 bool b_released; 1228 }; 1229 1230 /** 1231 * qed_mcp_resc_unlock(): Releases MFW generic resource lock. 1232 * 1233 * @p_hwfn: HW device data. 1234 * @p_ptt: P_ptt. 1235 * @p_params: Params. 1236 * 1237 * Return: Int - 0 - Operation was successul. 1238 */ 1239 int 1240 qed_mcp_resc_unlock(struct qed_hwfn *p_hwfn, 1241 struct qed_ptt *p_ptt, 1242 struct qed_resc_unlock_params *p_params); 1243 1244 /** 1245 * qed_mcp_resc_lock_default_init(): Default initialization for 1246 * lock/unlock resource structs. 1247 * 1248 * @p_lock: lock params struct to be initialized; Can be NULL. 1249 * @p_unlock: unlock params struct to be initialized; Can be NULL. 1250 * @resource: the requested resource. 1251 * @b_is_permanent: disable retries & aging when set. 1252 * 1253 * Return: Void. 1254 */ 1255 void qed_mcp_resc_lock_default_init(struct qed_resc_lock_params *p_lock, 1256 struct qed_resc_unlock_params *p_unlock, 1257 enum qed_resc_lock 1258 resource, bool b_is_permanent); 1259 1260 /** 1261 * qed_mcp_is_smart_an_supported(): Return whether management firmware 1262 * support smart AN 1263 * 1264 * @p_hwfn: HW device data. 1265 * 1266 * Return: bool true if feature is supported. 1267 */ 1268 bool qed_mcp_is_smart_an_supported(struct qed_hwfn *p_hwfn); 1269 1270 /** 1271 * qed_mcp_get_capabilities(): Learn of supported MFW features; 1272 * To be done during early init. 1273 * 1274 * @p_hwfn: HW device data. 1275 * @p_ptt: P_ptt. 1276 * 1277 * Return: Int. 1278 */ 1279 int qed_mcp_get_capabilities(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt); 1280 1281 /** 1282 * qed_mcp_set_capabilities(): Inform MFW of set of features supported 1283 * by driver. Should be done inside the content 1284 * of the LOAD_REQ. 1285 * 1286 * @p_hwfn: HW device data. 1287 * @p_ptt: P_ptt. 1288 * 1289 * Return: Int. 1290 */ 1291 int qed_mcp_set_capabilities(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt); 1292 1293 /** 1294 * qed_mcp_read_ufp_config(): Read ufp config from the shared memory. 1295 * 1296 * @p_hwfn: HW device data. 1297 * @p_ptt: P_ptt. 1298 * 1299 * Return: Void. 1300 */ 1301 void qed_mcp_read_ufp_config(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt); 1302 1303 /** 1304 * qed_mcp_nvm_info_populate(): Populate the nvm info shadow in the given 1305 * hardware function. 1306 * 1307 * @p_hwfn: HW device data. 1308 * 1309 * Return: Int. 1310 */ 1311 int qed_mcp_nvm_info_populate(struct qed_hwfn *p_hwfn); 1312 1313 /** 1314 * qed_mcp_nvm_info_free(): Delete nvm info shadow in the given 1315 * hardware function. 1316 * 1317 * @p_hwfn: HW device data. 1318 * 1319 * Return: Void. 1320 */ 1321 void qed_mcp_nvm_info_free(struct qed_hwfn *p_hwfn); 1322 1323 /** 1324 * qed_mcp_get_engine_config(): Get the engine affinity configuration. 1325 * 1326 * @p_hwfn: HW device data. 1327 * @p_ptt: P_ptt. 1328 * 1329 * Return: Int. 1330 */ 1331 int qed_mcp_get_engine_config(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt); 1332 1333 /** 1334 * qed_mcp_get_ppfid_bitmap(): Get the PPFID bitmap. 1335 * 1336 * @p_hwfn: HW device data. 1337 * @p_ptt: P_ptt. 1338 * 1339 * Return: Int. 1340 */ 1341 int qed_mcp_get_ppfid_bitmap(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt); 1342 1343 /** 1344 * qed_mcp_nvm_get_cfg(): Get NVM config attribute value. 1345 * 1346 * @p_hwfn: HW device data. 1347 * @p_ptt: P_ptt. 1348 * @option_id: Option ID. 1349 * @entity_id: Entity ID. 1350 * @flags: Flags. 1351 * @p_buf: Buf. 1352 * @p_len: Len. 1353 * 1354 * Return: Int. 1355 */ 1356 int qed_mcp_nvm_get_cfg(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, 1357 u16 option_id, u8 entity_id, u16 flags, u8 *p_buf, 1358 u32 *p_len); 1359 1360 /** 1361 * qed_mcp_nvm_set_cfg(): Set NVM config attribute value. 1362 * 1363 * @p_hwfn: HW device data. 1364 * @p_ptt: P_ptt. 1365 * @option_id: Option ID. 1366 * @entity_id: Entity ID. 1367 * @flags: Flags. 1368 * @p_buf: Buf. 1369 * @len: Len. 1370 * 1371 * Return: Int. 1372 */ 1373 int qed_mcp_nvm_set_cfg(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, 1374 u16 option_id, u8 entity_id, u16 flags, u8 *p_buf, 1375 u32 len); 1376 1377 /** 1378 * qed_mcp_is_esl_supported(): Return whether management firmware support ESL or not. 1379 * 1380 * @p_hwfn: hw function pointer 1381 * 1382 * Return: true if esl is supported, otherwise return false 1383 */ 1384 bool qed_mcp_is_esl_supported(struct qed_hwfn *p_hwfn); 1385 1386 /** 1387 * qed_mcp_get_esl_status(): Get enhanced system lockdown status 1388 * 1389 * @p_hwfn: hw function pointer 1390 * @p_ptt: ptt resource pointer 1391 * @active: ESL active status data pointer 1392 * 1393 * Return: 0 with esl status info on success, otherwise return error 1394 */ 1395 int qed_mcp_get_esl_status(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, bool *active); 1396 #endif 1397