1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * budget.ko: driver for the SAA7146 based Budget DVB cards
4 * without analog video input or CI
5 *
6 * Compiled from various sources by Michael Hunold <michael@mihu.de>
7 *
8 * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
9 *
10 * Copyright (C) 1999-2002 Ralph Metzler
11 * & Marcus Metzler for convergence integrated media GmbH
12 *
13 * 26feb2004 Support for FS Activy Card (Grundig tuner) by
14 * Michael Dreher <michael@5dot1.de>,
15 * Oliver Endriss <o.endriss@gmx.de> and
16 * Andreas 'randy' Weinberger
17 *
18 * the project's page is at https://linuxtv.org
19 */
20
21 #include "budget.h"
22 #include "stv0299.h"
23 #include "ves1x93.h"
24 #include "ves1820.h"
25 #include "l64781.h"
26 #include "tda8083.h"
27 #include "s5h1420.h"
28 #include "tda10086.h"
29 #include "tda826x.h"
30 #include "lnbp21.h"
31 #include "bsru6.h"
32 #include "bsbe1.h"
33 #include "tdhd1.h"
34 #include "stv6110x.h"
35 #include "stv090x.h"
36 #include "isl6423.h"
37 #include "lnbh24.h"
38
39
40 static int diseqc_method;
41 module_param(diseqc_method, int, 0444);
42 MODULE_PARM_DESC(diseqc_method, "Select DiSEqC method for subsystem id 13c2:1003, 0: default, 1: more reliable (for newer revisions only)");
43
44 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
45
Set22K(struct budget * budget,int state)46 static void Set22K(struct budget *budget, int state)
47 {
48 struct saa7146_dev *dev = budget->dev;
49
50 dprintk(2, "budget: %p\n", budget);
51 saa7146_setgpio(dev, 3, (state ? SAA7146_GPIO_OUTHI : SAA7146_GPIO_OUTLO));
52 }
53
54 /*
55 * Diseqc functions only for TT Budget card
56 * taken from the Skyvision DVB driver by
57 * Ralph Metzler <rjkm@metzlerbros.de>
58 */
59
DiseqcSendBit(struct budget * budget,int data)60 static void DiseqcSendBit(struct budget *budget, int data)
61 {
62 struct saa7146_dev *dev = budget->dev;
63
64 dprintk(2, "budget: %p\n", budget);
65
66 saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
67 udelay(data ? 500 : 1000);
68 saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
69 udelay(data ? 1000 : 500);
70 }
71
DiseqcSendByte(struct budget * budget,int data)72 static void DiseqcSendByte(struct budget *budget, int data)
73 {
74 int i, par = 1, d;
75
76 dprintk(2, "budget: %p\n", budget);
77
78 for (i = 7; i >= 0; i--) {
79 d = (data>>i)&1;
80 par ^= d;
81 DiseqcSendBit(budget, d);
82 }
83
84 DiseqcSendBit(budget, par);
85 }
86
SendDiSEqCMsg(struct budget * budget,int len,u8 * msg,unsigned long burst)87 static int SendDiSEqCMsg(struct budget *budget, int len, u8 *msg, unsigned long burst)
88 {
89 struct saa7146_dev *dev = budget->dev;
90 int i;
91
92 dprintk(2, "budget: %p\n", budget);
93
94 saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
95 mdelay(16);
96
97 for (i = 0; i < len; i++)
98 DiseqcSendByte(budget, msg[i]);
99
100 mdelay(16);
101
102 if (burst != -1) {
103 if (burst) {
104 DiseqcSendByte(budget, 0xff);
105 } else {
106 saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
107 mdelay(12);
108 udelay(500);
109 saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
110 }
111 msleep(20);
112 }
113
114 return 0;
115 }
116
117 /*
118 * Routines for the Fujitsu Siemens Activy budget card
119 * 22 kHz tone and DiSEqC are handled by the frontend.
120 * Voltage must be set here.
121 * GPIO 1: LNBP EN, GPIO 2: LNBP VSEL
122 */
SetVoltage_Activy(struct budget * budget,enum fe_sec_voltage voltage)123 static int SetVoltage_Activy(struct budget *budget,
124 enum fe_sec_voltage voltage)
125 {
126 struct saa7146_dev *dev = budget->dev;
127
128 dprintk(2, "budget: %p\n", budget);
129
130 switch (voltage) {
131 case SEC_VOLTAGE_13:
132 saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI);
133 saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTLO);
134 break;
135 case SEC_VOLTAGE_18:
136 saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI);
137 saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI);
138 break;
139 case SEC_VOLTAGE_OFF:
140 saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTLO);
141 break;
142 default:
143 return -EINVAL;
144 }
145
146 return 0;
147 }
148
siemens_budget_set_voltage(struct dvb_frontend * fe,enum fe_sec_voltage voltage)149 static int siemens_budget_set_voltage(struct dvb_frontend *fe,
150 enum fe_sec_voltage voltage)
151 {
152 struct budget *budget = fe->dvb->priv;
153
154 return SetVoltage_Activy(budget, voltage);
155 }
156
budget_set_tone(struct dvb_frontend * fe,enum fe_sec_tone_mode tone)157 static int budget_set_tone(struct dvb_frontend *fe,
158 enum fe_sec_tone_mode tone)
159 {
160 struct budget *budget = fe->dvb->priv;
161
162 switch (tone) {
163 case SEC_TONE_ON:
164 Set22K(budget, 1);
165 break;
166
167 case SEC_TONE_OFF:
168 Set22K(budget, 0);
169 break;
170
171 default:
172 return -EINVAL;
173 }
174
175 return 0;
176 }
177
budget_diseqc_send_master_cmd(struct dvb_frontend * fe,struct dvb_diseqc_master_cmd * cmd)178 static int budget_diseqc_send_master_cmd(struct dvb_frontend *fe, struct dvb_diseqc_master_cmd *cmd)
179 {
180 struct budget *budget = fe->dvb->priv;
181
182 SendDiSEqCMsg(budget, cmd->msg_len, cmd->msg, 0);
183
184 return 0;
185 }
186
budget_diseqc_send_burst(struct dvb_frontend * fe,enum fe_sec_mini_cmd minicmd)187 static int budget_diseqc_send_burst(struct dvb_frontend *fe,
188 enum fe_sec_mini_cmd minicmd)
189 {
190 struct budget *budget = fe->dvb->priv;
191
192 SendDiSEqCMsg(budget, 0, NULL, minicmd);
193
194 return 0;
195 }
196
alps_bsrv2_tuner_set_params(struct dvb_frontend * fe)197 static int alps_bsrv2_tuner_set_params(struct dvb_frontend *fe)
198 {
199 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
200 struct budget *budget = fe->dvb->priv;
201 u8 pwr = 0;
202 u8 buf[4];
203 struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
204 u32 div = (c->frequency + 479500) / 125;
205
206 if (c->frequency > 2000000)
207 pwr = 3;
208 else if (c->frequency > 1800000)
209 pwr = 2;
210 else if (c->frequency > 1600000)
211 pwr = 1;
212 else if (c->frequency > 1200000)
213 pwr = 0;
214 else if (c->frequency >= 1100000)
215 pwr = 1;
216 else
217 pwr = 2;
218
219 buf[0] = (div >> 8) & 0x7f;
220 buf[1] = div & 0xff;
221 buf[2] = ((div & 0x18000) >> 10) | 0x95;
222 buf[3] = (pwr << 6) | 0x30;
223
224 // NOTE: since we're using a prescaler of 2, we set the
225 // divisor frequency to 62.5kHz and divide by 125 above
226
227 if (fe->ops.i2c_gate_ctrl)
228 fe->ops.i2c_gate_ctrl(fe, 1);
229 if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
230 return -EIO;
231 return 0;
232 }
233
234 static struct ves1x93_config alps_bsrv2_config = {
235 .demod_address = 0x08,
236 .xin = 90100000UL,
237 .invert_pwm = 0,
238 };
239
alps_tdbe2_tuner_set_params(struct dvb_frontend * fe)240 static int alps_tdbe2_tuner_set_params(struct dvb_frontend *fe)
241 {
242 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
243 struct budget *budget = fe->dvb->priv;
244 u32 div;
245 u8 data[4];
246 struct i2c_msg msg = { .addr = 0x62, .flags = 0, .buf = data, .len = sizeof(data) };
247
248 div = (c->frequency + 35937500 + 31250) / 62500;
249
250 data[0] = (div >> 8) & 0x7f;
251 data[1] = div & 0xff;
252 data[2] = 0x85 | ((div >> 10) & 0x60);
253 data[3] = (c->frequency < 174000000 ? 0x88 : c->frequency < 470000000 ? 0x84 : 0x81);
254
255 if (fe->ops.i2c_gate_ctrl)
256 fe->ops.i2c_gate_ctrl(fe, 1);
257 if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
258 return -EIO;
259 return 0;
260 }
261
262 static struct ves1820_config alps_tdbe2_config = {
263 .demod_address = 0x09,
264 .xin = 57840000UL,
265 .invert = 1,
266 .selagc = VES1820_SELAGC_SIGNAMPERR,
267 };
268
grundig_29504_401_tuner_set_params(struct dvb_frontend * fe)269 static int grundig_29504_401_tuner_set_params(struct dvb_frontend *fe)
270 {
271 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
272 struct budget *budget = fe->dvb->priv;
273 u8 *tuner_addr = fe->tuner_priv;
274 u32 div;
275 u8 cfg, cpump, band_select;
276 u8 data[4];
277 struct i2c_msg msg = { .flags = 0, .buf = data, .len = sizeof(data) };
278
279 if (tuner_addr)
280 msg.addr = *tuner_addr;
281 else
282 msg.addr = 0x61;
283
284 div = (36125000 + c->frequency) / 166666;
285
286 cfg = 0x88;
287
288 if (c->frequency < 175000000)
289 cpump = 2;
290 else if (c->frequency < 390000000)
291 cpump = 1;
292 else if (c->frequency < 470000000)
293 cpump = 2;
294 else if (c->frequency < 750000000)
295 cpump = 1;
296 else
297 cpump = 3;
298
299 if (c->frequency < 175000000)
300 band_select = 0x0e;
301 else if (c->frequency < 470000000)
302 band_select = 0x05;
303 else
304 band_select = 0x03;
305
306 data[0] = (div >> 8) & 0x7f;
307 data[1] = div & 0xff;
308 data[2] = ((div >> 10) & 0x60) | cfg;
309 data[3] = (cpump << 6) | band_select;
310
311 if (fe->ops.i2c_gate_ctrl)
312 fe->ops.i2c_gate_ctrl(fe, 1);
313 if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
314 return -EIO;
315 return 0;
316 }
317
318 static struct l64781_config grundig_29504_401_config = {
319 .demod_address = 0x55,
320 };
321
322 static struct l64781_config grundig_29504_401_config_activy = {
323 .demod_address = 0x54,
324 };
325
326 static u8 tuner_address_grundig_29504_401_activy = 0x60;
327
grundig_29504_451_tuner_set_params(struct dvb_frontend * fe)328 static int grundig_29504_451_tuner_set_params(struct dvb_frontend *fe)
329 {
330 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
331 struct budget *budget = fe->dvb->priv;
332 u32 div;
333 u8 data[4];
334 struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
335
336 div = c->frequency / 125;
337 data[0] = (div >> 8) & 0x7f;
338 data[1] = div & 0xff;
339 data[2] = 0x8e;
340 data[3] = 0x00;
341
342 if (fe->ops.i2c_gate_ctrl)
343 fe->ops.i2c_gate_ctrl(fe, 1);
344 if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
345 return -EIO;
346 return 0;
347 }
348
349 static struct tda8083_config grundig_29504_451_config = {
350 .demod_address = 0x68,
351 };
352
s5h1420_tuner_set_params(struct dvb_frontend * fe)353 static int s5h1420_tuner_set_params(struct dvb_frontend *fe)
354 {
355 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
356 struct budget *budget = fe->dvb->priv;
357 u32 div;
358 u8 data[4];
359 struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
360
361 div = c->frequency / 1000;
362 data[0] = (div >> 8) & 0x7f;
363 data[1] = div & 0xff;
364 data[2] = 0xc2;
365
366 if (div < 1450)
367 data[3] = 0x00;
368 else if (div < 1850)
369 data[3] = 0x40;
370 else if (div < 2000)
371 data[3] = 0x80;
372 else
373 data[3] = 0xc0;
374
375 if (fe->ops.i2c_gate_ctrl)
376 fe->ops.i2c_gate_ctrl(fe, 1);
377 if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
378 return -EIO;
379
380 return 0;
381 }
382
383 static struct s5h1420_config s5h1420_config = {
384 .demod_address = 0x53,
385 .invert = 1,
386 .cdclk_polarity = 1,
387 };
388
389 static struct tda10086_config tda10086_config = {
390 .demod_address = 0x0e,
391 .invert = 0,
392 .diseqc_tone = 1,
393 .xtal_freq = TDA10086_XTAL_16M,
394 };
395
396 static const struct stv0299_config alps_bsru6_config_activy = {
397 .demod_address = 0x68,
398 .inittab = alps_bsru6_inittab,
399 .mclk = 88000000UL,
400 .invert = 1,
401 .op0_off = 1,
402 .min_delay_ms = 100,
403 .set_symbol_rate = alps_bsru6_set_symbol_rate,
404 };
405
406 static const struct stv0299_config alps_bsbe1_config_activy = {
407 .demod_address = 0x68,
408 .inittab = alps_bsbe1_inittab,
409 .mclk = 88000000UL,
410 .invert = 1,
411 .op0_off = 1,
412 .min_delay_ms = 100,
413 .set_symbol_rate = alps_bsbe1_set_symbol_rate,
414 };
415
alps_tdhd1_204_request_firmware(struct dvb_frontend * fe,const struct firmware ** fw,char * name)416 static int alps_tdhd1_204_request_firmware(struct dvb_frontend *fe, const struct firmware **fw, char *name)
417 {
418 struct budget *budget = fe->dvb->priv;
419
420 return request_firmware(fw, name, &budget->dev->pci->dev);
421 }
422
423
i2c_readreg(struct i2c_adapter * i2c,u8 adr,u8 reg)424 static int i2c_readreg(struct i2c_adapter *i2c, u8 adr, u8 reg)
425 {
426 u8 val;
427 struct i2c_msg msg[] = {
428 { .addr = adr, .flags = 0, .buf = ®, .len = 1 },
429 { .addr = adr, .flags = I2C_M_RD, .buf = &val, .len = 1 }
430 };
431
432 return (i2c_transfer(i2c, msg, 2) != 2) ? -EIO : val;
433 }
434
read_pwm(struct budget * budget)435 static u8 read_pwm(struct budget *budget)
436 {
437 u8 b = 0xff;
438 u8 pwm;
439 struct i2c_msg msg[] = { { .addr = 0x50, .flags = 0, .buf = &b, .len = 1 },
440 { .addr = 0x50, .flags = I2C_M_RD, .buf = &pwm, .len = 1} };
441
442 if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff))
443 pwm = 0x48;
444
445 return pwm;
446 }
447
448 static struct stv090x_config tt1600_stv090x_config = {
449 .device = STV0903,
450 .demod_mode = STV090x_SINGLE,
451 .clk_mode = STV090x_CLK_EXT,
452
453 .xtal = 13500000,
454 .address = 0x68,
455
456 .ts1_mode = STV090x_TSMODE_DVBCI,
457 .ts2_mode = STV090x_TSMODE_SERIAL_CONTINUOUS,
458
459 .repeater_level = STV090x_RPTLEVEL_16,
460
461 .tuner_init = NULL,
462 .tuner_sleep = NULL,
463 .tuner_set_mode = NULL,
464 .tuner_set_frequency = NULL,
465 .tuner_get_frequency = NULL,
466 .tuner_set_bandwidth = NULL,
467 .tuner_get_bandwidth = NULL,
468 .tuner_set_bbgain = NULL,
469 .tuner_get_bbgain = NULL,
470 .tuner_set_refclk = NULL,
471 .tuner_get_status = NULL,
472 };
473
474 static struct stv6110x_config tt1600_stv6110x_config = {
475 .addr = 0x60,
476 .refclk = 27000000,
477 .clk_div = 2,
478 };
479
480 static struct isl6423_config tt1600_isl6423_config = {
481 .current_max = SEC_CURRENT_515m,
482 .curlim = SEC_CURRENT_LIM_ON,
483 .mod_extern = 1,
484 .addr = 0x08,
485 };
486
frontend_init(struct budget * budget)487 static void frontend_init(struct budget *budget)
488 {
489 (void)alps_bsbe1_config; /* avoid warning */
490
491 switch (budget->dev->pci->subsystem_device) {
492 case 0x1003: // Hauppauge/TT Nova budget (stv0299/ALPS BSRU6(tsa5059) OR ves1893/ALPS BSRV2(sp5659))
493 case 0x1013:
494 // try the ALPS BSRV2 first of all
495 budget->dvb_frontend = dvb_attach(ves1x93_attach, &alps_bsrv2_config, &budget->i2c_adap);
496 if (budget->dvb_frontend) {
497 budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsrv2_tuner_set_params;
498 budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
499 budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst;
500 budget->dvb_frontend->ops.set_tone = budget_set_tone;
501 break;
502 }
503
504 // try the ALPS BSRU6 now
505 budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config, &budget->i2c_adap);
506 if (budget->dvb_frontend) {
507 budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
508 budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
509 if (budget->dev->pci->subsystem_device == 0x1003 && diseqc_method == 0) {
510 budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
511 budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst;
512 budget->dvb_frontend->ops.set_tone = budget_set_tone;
513 }
514 break;
515 }
516 break;
517
518 case 0x1004: // Hauppauge/TT DVB-C budget (ves1820/ALPS TDBE2(sp5659))
519
520 budget->dvb_frontend = dvb_attach(ves1820_attach, &alps_tdbe2_config, &budget->i2c_adap, read_pwm(budget));
521 if (budget->dvb_frontend) {
522 budget->dvb_frontend->ops.tuner_ops.set_params = alps_tdbe2_tuner_set_params;
523 break;
524 }
525 break;
526
527 case 0x1005: // Hauppauge/TT Nova-T budget (L64781/Grundig 29504-401(tsa5060))
528
529 budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config, &budget->i2c_adap);
530 if (budget->dvb_frontend) {
531 budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params;
532 budget->dvb_frontend->tuner_priv = NULL;
533 break;
534 }
535 break;
536
537 case 0x4f52: /* Cards based on Philips Semi Sylt PCI ref. design */
538 budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config, &budget->i2c_adap);
539 if (budget->dvb_frontend) {
540 pr_info("tuner ALPS BSRU6 in Philips Semi. Sylt detected\n");
541 budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
542 budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
543 break;
544 }
545 break;
546
547 case 0x4f60: /* Fujitsu Siemens Activy Budget-S PCI rev AL (stv0299/tsa5059) */
548 {
549 int subtype = i2c_readreg(&budget->i2c_adap, 0x50, 0x67);
550
551 if (subtype < 0)
552 break;
553 /* fixme: find a better way to identify the card */
554 if (subtype < 0x36) {
555 /* assume ALPS BSRU6 */
556 budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config_activy, &budget->i2c_adap);
557 if (budget->dvb_frontend) {
558 pr_info("tuner ALPS BSRU6 detected\n");
559 budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
560 budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
561 budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage;
562 budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL;
563 break;
564 }
565 } else {
566 /* assume ALPS BSBE1 */
567 /* reset tuner */
568 saa7146_setgpio(budget->dev, 3, SAA7146_GPIO_OUTLO);
569 msleep(50);
570 saa7146_setgpio(budget->dev, 3, SAA7146_GPIO_OUTHI);
571 msleep(250);
572 budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsbe1_config_activy, &budget->i2c_adap);
573 if (budget->dvb_frontend) {
574 pr_info("tuner ALPS BSBE1 detected\n");
575 budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params;
576 budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
577 budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage;
578 budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL;
579 break;
580 }
581 }
582 break;
583 }
584
585 case 0x4f61: // Fujitsu Siemens Activy Budget-S PCI rev GR (tda8083/Grundig 29504-451(tsa5522))
586 budget->dvb_frontend = dvb_attach(tda8083_attach, &grundig_29504_451_config, &budget->i2c_adap);
587 if (budget->dvb_frontend) {
588 budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_451_tuner_set_params;
589 budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage;
590 budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL;
591 }
592 break;
593
594 case 0x5f60: /* Fujitsu Siemens Activy Budget-T PCI rev AL (tda10046/ALPS TDHD1-204A) */
595 budget->dvb_frontend = dvb_attach(tda10046_attach, &alps_tdhd1_204a_config, &budget->i2c_adap);
596 if (budget->dvb_frontend) {
597 budget->dvb_frontend->ops.tuner_ops.set_params = alps_tdhd1_204a_tuner_set_params;
598 budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
599 }
600 break;
601
602 case 0x5f61: /* Fujitsu Siemens Activy Budget-T PCI rev GR (L64781/Grundig 29504-401(tsa5060)) */
603 budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config_activy, &budget->i2c_adap);
604 if (budget->dvb_frontend) {
605 budget->dvb_frontend->tuner_priv = &tuner_address_grundig_29504_401_activy;
606 budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params;
607 }
608 break;
609
610 case 0x1016: // Hauppauge/TT Nova-S SE (samsung s5h1420/????(tda8260))
611 {
612 struct dvb_frontend *fe;
613
614 fe = dvb_attach(s5h1420_attach, &s5h1420_config, &budget->i2c_adap);
615 if (fe) {
616 fe->ops.tuner_ops.set_params = s5h1420_tuner_set_params;
617 budget->dvb_frontend = fe;
618 if (dvb_attach(lnbp21_attach, fe, &budget->i2c_adap,
619 0, 0) == NULL) {
620 pr_err("%s(): No LNBP21 found!\n", __func__);
621 goto error_out;
622 }
623 break;
624 }
625 }
626 fallthrough;
627 case 0x1018: // TT Budget-S-1401 (philips tda10086/philips tda8262)
628 {
629 struct dvb_frontend *fe;
630
631 // gpio2 is connected to CLB - reset it + leave it high
632 saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO);
633 msleep(1);
634 saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI);
635 msleep(1);
636
637 fe = dvb_attach(tda10086_attach, &tda10086_config, &budget->i2c_adap);
638 if (fe) {
639 budget->dvb_frontend = fe;
640 if (dvb_attach(tda826x_attach, fe, 0x60,
641 &budget->i2c_adap, 0) == NULL)
642 pr_err("%s(): No tda826x found!\n", __func__);
643 if (dvb_attach(lnbp21_attach, fe,
644 &budget->i2c_adap, 0, 0) == NULL) {
645 pr_err("%s(): No LNBP21 found!\n", __func__);
646 goto error_out;
647 }
648 break;
649 }
650 }
651 fallthrough;
652
653 case 0x101c: { /* TT S2-1600 */
654 const struct stv6110x_devctl *ctl;
655
656 saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO);
657 msleep(50);
658 saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI);
659 msleep(250);
660
661 budget->dvb_frontend = dvb_attach(stv090x_attach,
662 &tt1600_stv090x_config,
663 &budget->i2c_adap,
664 STV090x_DEMODULATOR_0);
665
666 if (budget->dvb_frontend) {
667
668 ctl = dvb_attach(stv6110x_attach,
669 budget->dvb_frontend,
670 &tt1600_stv6110x_config,
671 &budget->i2c_adap);
672
673 if (ctl) {
674 tt1600_stv090x_config.tuner_init = ctl->tuner_init;
675 tt1600_stv090x_config.tuner_sleep = ctl->tuner_sleep;
676 tt1600_stv090x_config.tuner_set_mode = ctl->tuner_set_mode;
677 tt1600_stv090x_config.tuner_set_frequency = ctl->tuner_set_frequency;
678 tt1600_stv090x_config.tuner_get_frequency = ctl->tuner_get_frequency;
679 tt1600_stv090x_config.tuner_set_bandwidth = ctl->tuner_set_bandwidth;
680 tt1600_stv090x_config.tuner_get_bandwidth = ctl->tuner_get_bandwidth;
681 tt1600_stv090x_config.tuner_set_bbgain = ctl->tuner_set_bbgain;
682 tt1600_stv090x_config.tuner_get_bbgain = ctl->tuner_get_bbgain;
683 tt1600_stv090x_config.tuner_set_refclk = ctl->tuner_set_refclk;
684 tt1600_stv090x_config.tuner_get_status = ctl->tuner_get_status;
685
686 /*
687 * call the init function once to initialize
688 * tuner's clock output divider and demod's
689 * master clock
690 */
691 if (budget->dvb_frontend->ops.init)
692 budget->dvb_frontend->ops.init(budget->dvb_frontend);
693
694 if (dvb_attach(isl6423_attach,
695 budget->dvb_frontend,
696 &budget->i2c_adap,
697 &tt1600_isl6423_config) == NULL) {
698 pr_err("%s(): No Intersil ISL6423 found!\n", __func__);
699 goto error_out;
700 }
701 } else {
702 pr_err("%s(): No STV6110(A) Silicon Tuner found!\n", __func__);
703 goto error_out;
704 }
705 }
706 }
707 break;
708
709 case 0x1020: { /* Omicom S2 */
710 const struct stv6110x_devctl *ctl;
711
712 saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO);
713 msleep(50);
714 saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI);
715 msleep(250);
716
717 budget->dvb_frontend = dvb_attach(stv090x_attach,
718 &tt1600_stv090x_config,
719 &budget->i2c_adap,
720 STV090x_DEMODULATOR_0);
721
722 if (budget->dvb_frontend) {
723 pr_info("Omicom S2 detected\n");
724
725 ctl = dvb_attach(stv6110x_attach,
726 budget->dvb_frontend,
727 &tt1600_stv6110x_config,
728 &budget->i2c_adap);
729
730 if (ctl) {
731 tt1600_stv090x_config.tuner_init = ctl->tuner_init;
732 tt1600_stv090x_config.tuner_sleep = ctl->tuner_sleep;
733 tt1600_stv090x_config.tuner_set_mode = ctl->tuner_set_mode;
734 tt1600_stv090x_config.tuner_set_frequency = ctl->tuner_set_frequency;
735 tt1600_stv090x_config.tuner_get_frequency = ctl->tuner_get_frequency;
736 tt1600_stv090x_config.tuner_set_bandwidth = ctl->tuner_set_bandwidth;
737 tt1600_stv090x_config.tuner_get_bandwidth = ctl->tuner_get_bandwidth;
738 tt1600_stv090x_config.tuner_set_bbgain = ctl->tuner_set_bbgain;
739 tt1600_stv090x_config.tuner_get_bbgain = ctl->tuner_get_bbgain;
740 tt1600_stv090x_config.tuner_set_refclk = ctl->tuner_set_refclk;
741 tt1600_stv090x_config.tuner_get_status = ctl->tuner_get_status;
742
743 /*
744 * call the init function once to initialize
745 * tuner's clock output divider and demod's
746 * master clock
747 */
748 if (budget->dvb_frontend->ops.init)
749 budget->dvb_frontend->ops.init(budget->dvb_frontend);
750
751 if (dvb_attach(lnbh24_attach,
752 budget->dvb_frontend,
753 &budget->i2c_adap,
754 LNBH24_PCL | LNBH24_TTX,
755 LNBH24_TEN, 0x14>>1) == NULL) {
756 pr_err("No LNBH24 found!\n");
757 goto error_out;
758 }
759 } else {
760 pr_err("%s(): No STV6110(A) Silicon Tuner found!\n", __func__);
761 goto error_out;
762 }
763 }
764 }
765 break;
766 }
767
768 if (budget->dvb_frontend == NULL) {
769 pr_err("A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",
770 budget->dev->pci->vendor,
771 budget->dev->pci->device,
772 budget->dev->pci->subsystem_vendor,
773 budget->dev->pci->subsystem_device);
774 } else {
775 if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend))
776 goto error_out;
777 }
778 return;
779
780 error_out:
781 pr_err("Frontend registration failed!\n");
782 dvb_frontend_detach(budget->dvb_frontend);
783 budget->dvb_frontend = NULL;
784 }
785
budget_attach(struct saa7146_dev * dev,struct saa7146_pci_extension_data * info)786 static int budget_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
787 {
788 struct budget *budget = NULL;
789 int err;
790
791 budget = kmalloc(sizeof(struct budget), GFP_KERNEL);
792 if (budget == NULL)
793 return -ENOMEM;
794
795 dprintk(2, "dev:%p, info:%p, budget:%p\n", dev, info, budget);
796
797 dev->ext_priv = budget;
798
799 err = ttpci_budget_init(budget, dev, info, THIS_MODULE, adapter_nr);
800 if (err) {
801 pr_err("==> failed\n");
802 kfree(budget);
803 return err;
804 }
805
806 budget->dvb_adapter.priv = budget;
807 frontend_init(budget);
808
809 ttpci_budget_init_hooks(budget);
810
811 return 0;
812 }
813
budget_detach(struct saa7146_dev * dev)814 static int budget_detach(struct saa7146_dev *dev)
815 {
816 struct budget *budget = dev->ext_priv;
817 int err;
818
819 if (budget->dvb_frontend) {
820 dvb_unregister_frontend(budget->dvb_frontend);
821 dvb_frontend_detach(budget->dvb_frontend);
822 }
823
824 err = ttpci_budget_deinit(budget);
825
826 kfree(budget);
827 dev->ext_priv = NULL;
828
829 return err;
830 }
831
832 static struct saa7146_extension budget_extension;
833
834 MAKE_BUDGET_INFO(ttbs, "TT-Budget/WinTV-NOVA-S PCI", BUDGET_TT);
835 MAKE_BUDGET_INFO(ttbc, "TT-Budget/WinTV-NOVA-C PCI", BUDGET_TT);
836 MAKE_BUDGET_INFO(ttbt, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT);
837 MAKE_BUDGET_INFO(satel, "SATELCO Multimedia PCI", BUDGET_TT_HW_DISEQC);
838 MAKE_BUDGET_INFO(ttbs1401, "TT-Budget-S-1401 PCI", BUDGET_TT);
839 MAKE_BUDGET_INFO(tt1600, "TT-Budget S2-1600 PCI", BUDGET_TT);
840 MAKE_BUDGET_INFO(fsacs0, "Fujitsu Siemens Activy Budget-S PCI (rev GR/grundig frontend)", BUDGET_FS_ACTIVY);
841 MAKE_BUDGET_INFO(fsacs1, "Fujitsu Siemens Activy Budget-S PCI (rev AL/alps frontend)", BUDGET_FS_ACTIVY);
842 MAKE_BUDGET_INFO(fsact, "Fujitsu Siemens Activy Budget-T PCI (rev GR/Grundig frontend)", BUDGET_FS_ACTIVY);
843 MAKE_BUDGET_INFO(fsact1, "Fujitsu Siemens Activy Budget-T PCI (rev AL/ALPS TDHD1-204A)", BUDGET_FS_ACTIVY);
844 MAKE_BUDGET_INFO(omicom, "Omicom S2 PCI", BUDGET_TT);
845 MAKE_BUDGET_INFO(sylt, "Philips Semi Sylt PCI", BUDGET_TT_HW_DISEQC);
846
847 static const struct pci_device_id pci_tbl[] = {
848 MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1003),
849 MAKE_EXTENSION_PCI(ttbc, 0x13c2, 0x1004),
850 MAKE_EXTENSION_PCI(ttbt, 0x13c2, 0x1005),
851 MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013),
852 MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1016),
853 MAKE_EXTENSION_PCI(ttbs1401, 0x13c2, 0x1018),
854 MAKE_EXTENSION_PCI(tt1600, 0x13c2, 0x101c),
855 MAKE_EXTENSION_PCI(fsacs1, 0x1131, 0x4f60),
856 MAKE_EXTENSION_PCI(fsacs0, 0x1131, 0x4f61),
857 MAKE_EXTENSION_PCI(fsact1, 0x1131, 0x5f60),
858 MAKE_EXTENSION_PCI(fsact, 0x1131, 0x5f61),
859 MAKE_EXTENSION_PCI(omicom, 0x14c4, 0x1020),
860 MAKE_EXTENSION_PCI(sylt, 0x1131, 0x4f52),
861 {
862 .vendor = 0,
863 }
864 };
865
866 MODULE_DEVICE_TABLE(pci, pci_tbl);
867
868 static struct saa7146_extension budget_extension = {
869 .name = "budget dvb",
870 .flags = SAA7146_USE_I2C_IRQ,
871
872 .module = THIS_MODULE,
873 .pci_tbl = pci_tbl,
874 .attach = budget_attach,
875 .detach = budget_detach,
876
877 .irq_mask = MASK_10,
878 .irq_func = ttpci_budget_irq10_handler,
879 };
880
budget_init(void)881 static int __init budget_init(void)
882 {
883 return saa7146_register_extension(&budget_extension);
884 }
885
budget_exit(void)886 static void __exit budget_exit(void)
887 {
888 saa7146_unregister_extension(&budget_extension);
889 }
890
891 module_init(budget_init);
892 module_exit(budget_exit);
893
894 MODULE_LICENSE("GPL");
895 MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others");
896 MODULE_DESCRIPTION("driver for the SAA7146 based so-called budget PCI DVB cards by Siemens, Technotrend, Hauppauge");
897