1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Copyright (c) 2001-2002 by David Brownell 4 */ 5 6 #ifndef __USB_CORE_HCD_H 7 #define __USB_CORE_HCD_H 8 9 #ifdef __KERNEL__ 10 11 #include <linux/rwsem.h> 12 #include <linux/interrupt.h> 13 #include <linux/idr.h> 14 15 #define MAX_TOPO_LEVEL 6 16 17 /* This file contains declarations of usbcore internals that are mostly 18 * used or exposed by Host Controller Drivers. 19 */ 20 21 /* 22 * USB Packet IDs (PIDs) 23 */ 24 #define USB_PID_EXT 0xf0 /* USB 2.0 LPM ECN */ 25 #define USB_PID_OUT 0xe1 26 #define USB_PID_ACK 0xd2 27 #define USB_PID_DATA0 0xc3 28 #define USB_PID_PING 0xb4 /* USB 2.0 */ 29 #define USB_PID_SOF 0xa5 30 #define USB_PID_NYET 0x96 /* USB 2.0 */ 31 #define USB_PID_DATA2 0x87 /* USB 2.0 */ 32 #define USB_PID_SPLIT 0x78 /* USB 2.0 */ 33 #define USB_PID_IN 0x69 34 #define USB_PID_NAK 0x5a 35 #define USB_PID_DATA1 0x4b 36 #define USB_PID_PREAMBLE 0x3c /* Token mode */ 37 #define USB_PID_ERR 0x3c /* USB 2.0: handshake mode */ 38 #define USB_PID_SETUP 0x2d 39 #define USB_PID_STALL 0x1e 40 #define USB_PID_MDATA 0x0f /* USB 2.0 */ 41 42 /*-------------------------------------------------------------------------*/ 43 44 /* 45 * USB Host Controller Driver (usb_hcd) framework 46 * 47 * Since "struct usb_bus" is so thin, you can't share much code in it. 48 * This framework is a layer over that, and should be more shareable. 49 */ 50 51 /*-------------------------------------------------------------------------*/ 52 53 struct giveback_urb_bh { 54 bool running; 55 bool high_prio; 56 spinlock_t lock; 57 struct list_head head; 58 struct work_struct bh; 59 struct usb_host_endpoint *completing_ep; 60 }; 61 62 enum usb_dev_authorize_policy { 63 USB_DEVICE_AUTHORIZE_NONE = 0, 64 USB_DEVICE_AUTHORIZE_ALL = 1, 65 USB_DEVICE_AUTHORIZE_INTERNAL = 2, 66 }; 67 68 struct usb_hcd { 69 70 /* 71 * housekeeping 72 */ 73 struct usb_bus self; /* hcd is-a bus */ 74 struct kref kref; /* reference counter */ 75 76 const char *product_desc; /* product/vendor string */ 77 int speed; /* Speed for this roothub. 78 * May be different from 79 * hcd->driver->flags & HCD_MASK 80 */ 81 char irq_descr[24]; /* driver + bus # */ 82 83 struct timer_list rh_timer; /* drives root-hub polling */ 84 struct urb *status_urb; /* the current status urb */ 85 #ifdef CONFIG_PM 86 struct work_struct wakeup_work; /* for remote wakeup */ 87 #endif 88 struct work_struct died_work; /* for when the device dies */ 89 90 /* 91 * hardware info/state 92 */ 93 const struct hc_driver *driver; /* hw-specific hooks */ 94 95 /* 96 * OTG and some Host controllers need software interaction with phys; 97 * other external phys should be software-transparent 98 */ 99 struct usb_phy *usb_phy; 100 struct usb_phy_roothub *phy_roothub; 101 102 /* Flags that need to be manipulated atomically because they can 103 * change while the host controller is running. Always use 104 * set_bit() or clear_bit() to change their values. 105 */ 106 unsigned long flags; 107 #define HCD_FLAG_HW_ACCESSIBLE 0 /* at full power */ 108 #define HCD_FLAG_POLL_RH 2 /* poll for rh status? */ 109 #define HCD_FLAG_POLL_PENDING 3 /* status has changed? */ 110 #define HCD_FLAG_WAKEUP_PENDING 4 /* root hub is resuming? */ 111 #define HCD_FLAG_RH_RUNNING 5 /* root hub is running? */ 112 #define HCD_FLAG_DEAD 6 /* controller has died? */ 113 #define HCD_FLAG_INTF_AUTHORIZED 7 /* authorize interfaces? */ 114 #define HCD_FLAG_DEFER_RH_REGISTER 8 /* Defer roothub registration */ 115 116 /* The flags can be tested using these macros; they are likely to 117 * be slightly faster than test_bit(). 118 */ 119 #define HCD_HW_ACCESSIBLE(hcd) ((hcd)->flags & (1U << HCD_FLAG_HW_ACCESSIBLE)) 120 #define HCD_POLL_RH(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_RH)) 121 #define HCD_POLL_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING)) 122 #define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING)) 123 #define HCD_RH_RUNNING(hcd) ((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING)) 124 #define HCD_DEAD(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEAD)) 125 #define HCD_DEFER_RH_REGISTER(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEFER_RH_REGISTER)) 126 127 /* 128 * Specifies if interfaces are authorized by default 129 * or they require explicit user space authorization; this bit is 130 * settable through /sys/class/usb_host/X/interface_authorized_default 131 */ 132 #define HCD_INTF_AUTHORIZED(hcd) \ 133 ((hcd)->flags & (1U << HCD_FLAG_INTF_AUTHORIZED)) 134 135 /* 136 * Specifies if devices are authorized by default 137 * or they require explicit user space authorization; this bit is 138 * settable through /sys/class/usb_host/X/authorized_default 139 */ 140 enum usb_dev_authorize_policy dev_policy; 141 142 /* Flags that get set only during HCD registration or removal. */ 143 unsigned rh_registered:1;/* is root hub registered? */ 144 unsigned rh_pollable:1; /* may we poll the root hub? */ 145 unsigned msix_enabled:1; /* driver has MSI-X enabled? */ 146 unsigned msi_enabled:1; /* driver has MSI enabled? */ 147 /* 148 * do not manage the PHY state in the HCD core, instead let the driver 149 * handle this (for example if the PHY can only be turned on after a 150 * specific event) 151 */ 152 unsigned skip_phy_initialization:1; 153 154 /* The next flag is a stopgap, to be removed when all the HCDs 155 * support the new root-hub polling mechanism. */ 156 unsigned uses_new_polling:1; 157 unsigned has_tt:1; /* Integrated TT in root hub */ 158 unsigned amd_resume_bug:1; /* AMD remote wakeup quirk */ 159 unsigned can_do_streams:1; /* HC supports streams */ 160 unsigned tpl_support:1; /* OTG & EH TPL support */ 161 unsigned cant_recv_wakeups:1; 162 /* wakeup requests from downstream aren't received */ 163 164 unsigned int irq; /* irq allocated */ 165 void __iomem *regs; /* device memory/io */ 166 resource_size_t rsrc_start; /* memory/io resource start */ 167 resource_size_t rsrc_len; /* memory/io resource length */ 168 unsigned power_budget; /* in mA, 0 = no limit */ 169 170 struct giveback_urb_bh high_prio_bh; 171 struct giveback_urb_bh low_prio_bh; 172 173 /* bandwidth_mutex should be taken before adding or removing 174 * any new bus bandwidth constraints: 175 * 1. Before adding a configuration for a new device. 176 * 2. Before removing the configuration to put the device into 177 * the addressed state. 178 * 3. Before selecting a different configuration. 179 * 4. Before selecting an alternate interface setting. 180 * 181 * bandwidth_mutex should be dropped after a successful control message 182 * to the device, or resetting the bandwidth after a failed attempt. 183 */ 184 struct mutex *address0_mutex; 185 struct mutex *bandwidth_mutex; 186 struct usb_hcd *shared_hcd; 187 struct usb_hcd *primary_hcd; 188 189 190 #define HCD_BUFFER_POOLS 4 191 struct dma_pool *pool[HCD_BUFFER_POOLS]; 192 193 int state; 194 # define __ACTIVE 0x01 195 # define __SUSPEND 0x04 196 # define __TRANSIENT 0x80 197 198 # define HC_STATE_HALT 0 199 # define HC_STATE_RUNNING (__ACTIVE) 200 # define HC_STATE_QUIESCING (__SUSPEND|__TRANSIENT|__ACTIVE) 201 # define HC_STATE_RESUMING (__SUSPEND|__TRANSIENT) 202 # define HC_STATE_SUSPENDED (__SUSPEND) 203 204 #define HC_IS_RUNNING(state) ((state) & __ACTIVE) 205 #define HC_IS_SUSPENDED(state) ((state) & __SUSPEND) 206 207 /* memory pool for HCs having local memory, or %NULL */ 208 struct gen_pool *localmem_pool; 209 210 /* more shared queuing code would be good; it should support 211 * smarter scheduling, handle transaction translators, etc; 212 * input size of periodic table to an interrupt scheduler. 213 * (ohci 32, uhci 1024, ehci 256/512/1024). 214 */ 215 216 /* The HC driver's private data is stored at the end of 217 * this structure. 218 */ 219 unsigned long hcd_priv[] 220 __attribute__ ((aligned(sizeof(s64)))); 221 }; 222 223 /* 2.4 does this a bit differently ... */ hcd_to_bus(struct usb_hcd * hcd)224 static inline struct usb_bus *hcd_to_bus(struct usb_hcd *hcd) 225 { 226 return &hcd->self; 227 } 228 bus_to_hcd(struct usb_bus * bus)229 static inline struct usb_hcd *bus_to_hcd(struct usb_bus *bus) 230 { 231 return container_of(bus, struct usb_hcd, self); 232 } 233 234 /*-------------------------------------------------------------------------*/ 235 236 237 struct hc_driver { 238 const char *description; /* "ehci-hcd" etc */ 239 const char *product_desc; /* product/vendor string */ 240 size_t hcd_priv_size; /* size of private data */ 241 242 /* irq handler */ 243 irqreturn_t (*irq) (struct usb_hcd *hcd); 244 245 int flags; 246 #define HCD_MEMORY 0x0001 /* HC regs use memory (else I/O) */ 247 #define HCD_DMA 0x0002 /* HC uses DMA */ 248 #define HCD_SHARED 0x0004 /* Two (or more) usb_hcds share HW */ 249 #define HCD_USB11 0x0010 /* USB 1.1 */ 250 #define HCD_USB2 0x0020 /* USB 2.0 */ 251 #define HCD_USB3 0x0040 /* USB 3.0 */ 252 #define HCD_USB31 0x0050 /* USB 3.1 */ 253 #define HCD_USB32 0x0060 /* USB 3.2 */ 254 #define HCD_MASK 0x0070 255 #define HCD_BH 0x0100 /* URB complete in BH context */ 256 257 /* called to init HCD and root hub */ 258 int (*reset) (struct usb_hcd *hcd); 259 int (*start) (struct usb_hcd *hcd); 260 261 /* NOTE: these suspend/resume calls relate to the HC as 262 * a whole, not just the root hub; they're for PCI bus glue. 263 */ 264 /* called after suspending the hub, before entering D3 etc */ 265 int (*pci_suspend)(struct usb_hcd *hcd, bool do_wakeup); 266 267 /* called after entering D0 (etc), before resuming the hub */ 268 int (*pci_resume)(struct usb_hcd *hcd, pm_message_t state); 269 270 /* called just before hibernate final D3 state, allows host to poweroff parts */ 271 int (*pci_poweroff_late)(struct usb_hcd *hcd, bool do_wakeup); 272 273 /* cleanly make HCD stop writing memory and doing I/O */ 274 void (*stop) (struct usb_hcd *hcd); 275 276 /* shutdown HCD */ 277 void (*shutdown) (struct usb_hcd *hcd); 278 279 /* return current frame number */ 280 int (*get_frame_number) (struct usb_hcd *hcd); 281 282 /* manage i/o requests, device state */ 283 int (*urb_enqueue)(struct usb_hcd *hcd, 284 struct urb *urb, gfp_t mem_flags); 285 int (*urb_dequeue)(struct usb_hcd *hcd, 286 struct urb *urb, int status); 287 288 /* 289 * (optional) these hooks allow an HCD to override the default DMA 290 * mapping and unmapping routines. In general, they shouldn't be 291 * necessary unless the host controller has special DMA requirements, 292 * such as alignment constraints. If these are not specified, the 293 * general usb_hcd_(un)?map_urb_for_dma functions will be used instead 294 * (and it may be a good idea to call these functions in your HCD 295 * implementation) 296 */ 297 int (*map_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb, 298 gfp_t mem_flags); 299 void (*unmap_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb); 300 301 /* hw synch, freeing endpoint resources that urb_dequeue can't */ 302 void (*endpoint_disable)(struct usb_hcd *hcd, 303 struct usb_host_endpoint *ep); 304 305 /* (optional) reset any endpoint state such as sequence number 306 and current window */ 307 void (*endpoint_reset)(struct usb_hcd *hcd, 308 struct usb_host_endpoint *ep); 309 310 /* root hub support */ 311 int (*hub_status_data) (struct usb_hcd *hcd, char *buf); 312 int (*hub_control) (struct usb_hcd *hcd, 313 u16 typeReq, u16 wValue, u16 wIndex, 314 char *buf, u16 wLength); 315 int (*bus_suspend)(struct usb_hcd *); 316 int (*bus_resume)(struct usb_hcd *); 317 int (*start_port_reset)(struct usb_hcd *, unsigned port_num); 318 unsigned long (*get_resuming_ports)(struct usb_hcd *); 319 320 /* force handover of high-speed port to full-speed companion */ 321 void (*relinquish_port)(struct usb_hcd *, int); 322 /* has a port been handed over to a companion? */ 323 int (*port_handed_over)(struct usb_hcd *, int); 324 325 /* CLEAR_TT_BUFFER completion callback */ 326 void (*clear_tt_buffer_complete)(struct usb_hcd *, 327 struct usb_host_endpoint *); 328 329 /* xHCI specific functions */ 330 /* Called by usb_alloc_dev to alloc HC device structures */ 331 int (*alloc_dev)(struct usb_hcd *, struct usb_device *); 332 /* Called by usb_disconnect to free HC device structures */ 333 void (*free_dev)(struct usb_hcd *, struct usb_device *); 334 /* Change a group of bulk endpoints to support multiple stream IDs */ 335 int (*alloc_streams)(struct usb_hcd *hcd, struct usb_device *udev, 336 struct usb_host_endpoint **eps, unsigned int num_eps, 337 unsigned int num_streams, gfp_t mem_flags); 338 /* Reverts a group of bulk endpoints back to not using stream IDs. 339 * Can fail if we run out of memory. 340 */ 341 int (*free_streams)(struct usb_hcd *hcd, struct usb_device *udev, 342 struct usb_host_endpoint **eps, unsigned int num_eps, 343 gfp_t mem_flags); 344 345 /* Bandwidth computation functions */ 346 /* Note that add_endpoint() can only be called once per endpoint before 347 * check_bandwidth() or reset_bandwidth() must be called. 348 * drop_endpoint() can only be called once per endpoint also. 349 * A call to xhci_drop_endpoint() followed by a call to 350 * xhci_add_endpoint() will add the endpoint to the schedule with 351 * possibly new parameters denoted by a different endpoint descriptor 352 * in usb_host_endpoint. A call to xhci_add_endpoint() followed by a 353 * call to xhci_drop_endpoint() is not allowed. 354 */ 355 /* Allocate endpoint resources and add them to a new schedule */ 356 int (*add_endpoint)(struct usb_hcd *, struct usb_device *, 357 struct usb_host_endpoint *); 358 /* Drop an endpoint from a new schedule */ 359 int (*drop_endpoint)(struct usb_hcd *, struct usb_device *, 360 struct usb_host_endpoint *); 361 /* Check that a new hardware configuration, set using 362 * endpoint_enable and endpoint_disable, does not exceed bus 363 * bandwidth. This must be called before any set configuration 364 * or set interface requests are sent to the device. 365 */ 366 int (*check_bandwidth)(struct usb_hcd *, struct usb_device *); 367 /* Reset the device schedule to the last known good schedule, 368 * which was set from a previous successful call to 369 * check_bandwidth(). This reverts any add_endpoint() and 370 * drop_endpoint() calls since that last successful call. 371 * Used for when a check_bandwidth() call fails due to resource 372 * or bandwidth constraints. 373 */ 374 void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *); 375 /* Set the hardware-chosen device address */ 376 int (*address_device)(struct usb_hcd *, struct usb_device *udev, 377 unsigned int timeout_ms); 378 /* prepares the hardware to send commands to the device */ 379 int (*enable_device)(struct usb_hcd *, struct usb_device *udev); 380 /* Notifies the HCD after a hub descriptor is fetched. 381 * Will block. 382 */ 383 int (*update_hub_device)(struct usb_hcd *, struct usb_device *hdev, 384 struct usb_tt *tt, gfp_t mem_flags); 385 int (*reset_device)(struct usb_hcd *, struct usb_device *); 386 /* Notifies the HCD after a device is connected and its 387 * address is set 388 */ 389 int (*update_device)(struct usb_hcd *, struct usb_device *); 390 int (*set_usb2_hw_lpm)(struct usb_hcd *, struct usb_device *, int); 391 /* USB 3.0 Link Power Management */ 392 /* Returns the USB3 hub-encoded value for the U1/U2 timeout. */ 393 int (*enable_usb3_lpm_timeout)(struct usb_hcd *, 394 struct usb_device *, enum usb3_link_state state); 395 /* The xHCI host controller can still fail the command to 396 * disable the LPM timeouts, so this can return an error code. 397 */ 398 int (*disable_usb3_lpm_timeout)(struct usb_hcd *, 399 struct usb_device *, enum usb3_link_state state); 400 int (*find_raw_port_number)(struct usb_hcd *, int); 401 /* Call for power on/off the port if necessary */ 402 int (*port_power)(struct usb_hcd *hcd, int portnum, bool enable); 403 /* Call for SINGLE_STEP_SET_FEATURE Test for USB2 EH certification */ 404 #define EHSET_TEST_SINGLE_STEP_SET_FEATURE 0x06 405 int (*submit_single_step_set_feature)(struct usb_hcd *, 406 struct urb *, int); 407 }; 408 hcd_giveback_urb_in_bh(struct usb_hcd * hcd)409 static inline int hcd_giveback_urb_in_bh(struct usb_hcd *hcd) 410 { 411 return hcd->driver->flags & HCD_BH; 412 } 413 hcd_periodic_completion_in_progress(struct usb_hcd * hcd,struct usb_host_endpoint * ep)414 static inline bool hcd_periodic_completion_in_progress(struct usb_hcd *hcd, 415 struct usb_host_endpoint *ep) 416 { 417 return hcd->high_prio_bh.completing_ep == ep; 418 } 419 hcd_uses_dma(struct usb_hcd * hcd)420 static inline bool hcd_uses_dma(struct usb_hcd *hcd) 421 { 422 return IS_ENABLED(CONFIG_HAS_DMA) && (hcd->driver->flags & HCD_DMA); 423 } 424 425 extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb); 426 extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb, 427 int status); 428 extern void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb); 429 430 extern int usb_hcd_submit_urb(struct urb *urb, gfp_t mem_flags); 431 extern int usb_hcd_unlink_urb(struct urb *urb, int status); 432 extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, 433 int status); 434 extern int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, 435 gfp_t mem_flags); 436 extern void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *, struct urb *); 437 extern void usb_hcd_unmap_urb_for_dma(struct usb_hcd *, struct urb *); 438 extern void usb_hcd_flush_endpoint(struct usb_device *udev, 439 struct usb_host_endpoint *ep); 440 extern void usb_hcd_disable_endpoint(struct usb_device *udev, 441 struct usb_host_endpoint *ep); 442 extern void usb_hcd_reset_endpoint(struct usb_device *udev, 443 struct usb_host_endpoint *ep); 444 extern void usb_hcd_synchronize_unlinks(struct usb_device *udev); 445 extern int usb_hcd_alloc_bandwidth(struct usb_device *udev, 446 struct usb_host_config *new_config, 447 struct usb_host_interface *old_alt, 448 struct usb_host_interface *new_alt); 449 extern int usb_hcd_get_frame_number(struct usb_device *udev); 450 451 struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver, 452 struct device *sysdev, struct device *dev, const char *bus_name, 453 struct usb_hcd *primary_hcd); 454 extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver, 455 struct device *dev, const char *bus_name); 456 extern struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver, 457 struct device *dev, const char *bus_name, 458 struct usb_hcd *shared_hcd); 459 extern struct usb_hcd *usb_get_hcd(struct usb_hcd *hcd); 460 extern void usb_put_hcd(struct usb_hcd *hcd); 461 extern int usb_hcd_is_primary_hcd(struct usb_hcd *hcd); 462 extern int usb_add_hcd(struct usb_hcd *hcd, 463 unsigned int irqnum, unsigned long irqflags); 464 extern void usb_remove_hcd(struct usb_hcd *hcd); 465 extern int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1); 466 int usb_hcd_setup_local_mem(struct usb_hcd *hcd, phys_addr_t phys_addr, 467 dma_addr_t dma, size_t size); 468 469 struct platform_device; 470 extern void usb_hcd_platform_shutdown(struct platform_device *dev); 471 #ifdef CONFIG_USB_HCD_TEST_MODE 472 extern int ehset_single_step_set_feature(struct usb_hcd *hcd, int port); 473 #else ehset_single_step_set_feature(struct usb_hcd * hcd,int port)474 static inline int ehset_single_step_set_feature(struct usb_hcd *hcd, int port) 475 { 476 return 0; 477 } 478 #endif /* CONFIG_USB_HCD_TEST_MODE */ 479 480 #ifdef CONFIG_USB_PCI 481 struct pci_dev; 482 struct pci_device_id; 483 extern int usb_hcd_pci_probe(struct pci_dev *dev, 484 const struct hc_driver *driver); 485 extern void usb_hcd_pci_remove(struct pci_dev *dev); 486 extern void usb_hcd_pci_shutdown(struct pci_dev *dev); 487 488 #ifdef CONFIG_USB_PCI_AMD 489 extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev); 490 usb_hcd_amd_resume_bug(struct pci_dev * dev,const struct hc_driver * driver)491 static inline bool usb_hcd_amd_resume_bug(struct pci_dev *dev, 492 const struct hc_driver *driver) 493 { 494 if (!usb_hcd_amd_remote_wakeup_quirk(dev)) 495 return false; 496 if (driver->flags & (HCD_USB11 | HCD_USB3)) 497 return true; 498 return false; 499 } 500 #else /* CONFIG_USB_PCI_AMD */ usb_hcd_amd_resume_bug(struct pci_dev * dev,const struct hc_driver * driver)501 static inline bool usb_hcd_amd_resume_bug(struct pci_dev *dev, 502 const struct hc_driver *driver) 503 { 504 return false; 505 } 506 #endif 507 extern const struct dev_pm_ops usb_hcd_pci_pm_ops; 508 #endif /* CONFIG_USB_PCI */ 509 510 /* pci-ish (pdev null is ok) buffer alloc/mapping support */ 511 void usb_init_pool_max(void); 512 int hcd_buffer_create(struct usb_hcd *hcd); 513 void hcd_buffer_destroy(struct usb_hcd *hcd); 514 515 void *hcd_buffer_alloc(struct usb_bus *bus, size_t size, 516 gfp_t mem_flags, dma_addr_t *dma); 517 void hcd_buffer_free(struct usb_bus *bus, size_t size, 518 void *addr, dma_addr_t dma); 519 520 void *hcd_buffer_alloc_pages(struct usb_hcd *hcd, 521 size_t size, gfp_t mem_flags, dma_addr_t *dma); 522 void hcd_buffer_free_pages(struct usb_hcd *hcd, 523 size_t size, void *addr, dma_addr_t dma); 524 525 /* generic bus glue, needed for host controllers that don't use PCI */ 526 extern irqreturn_t usb_hcd_irq(int irq, void *__hcd); 527 528 extern void usb_hc_died(struct usb_hcd *hcd); 529 extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd); 530 extern void usb_wakeup_notification(struct usb_device *hdev, 531 unsigned int portnum); 532 533 extern void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum); 534 extern void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum); 535 536 /* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */ 537 #define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1) 538 #define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep))) 539 #define usb_settoggle(dev, ep, out, bit) \ 540 ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \ 541 ((bit) << (ep))) 542 543 /* -------------------------------------------------------------------------- */ 544 545 /* Enumeration is only for the hub driver, or HCD virtual root hubs */ 546 extern struct usb_device *usb_alloc_dev(struct usb_device *parent, 547 struct usb_bus *, unsigned port); 548 extern int usb_new_device(struct usb_device *dev); 549 extern void usb_disconnect(struct usb_device **); 550 551 extern int usb_get_configuration(struct usb_device *dev); 552 extern void usb_destroy_configuration(struct usb_device *dev); 553 554 /*-------------------------------------------------------------------------*/ 555 556 /* 557 * HCD Root Hub support 558 */ 559 560 #include <linux/usb/ch11.h> 561 562 /* 563 * As of USB 2.0, full/low speed devices are segregated into trees. 564 * One type grows from USB 1.1 host controllers (OHCI, UHCI etc). 565 * The other type grows from high speed hubs when they connect to 566 * full/low speed devices using "Transaction Translators" (TTs). 567 * 568 * TTs should only be known to the hub driver, and high speed bus 569 * drivers (only EHCI for now). They affect periodic scheduling and 570 * sometimes control/bulk error recovery. 571 */ 572 573 struct usb_device; 574 575 struct usb_tt { 576 struct usb_device *hub; /* upstream highspeed hub */ 577 int multi; /* true means one TT per port */ 578 unsigned think_time; /* think time in ns */ 579 void *hcpriv; /* HCD private data */ 580 581 /* for control/bulk error recovery (CLEAR_TT_BUFFER) */ 582 spinlock_t lock; 583 struct list_head clear_list; /* of usb_tt_clear */ 584 struct work_struct clear_work; 585 }; 586 587 struct usb_tt_clear { 588 struct list_head clear_list; 589 unsigned tt; 590 u16 devinfo; 591 struct usb_hcd *hcd; 592 struct usb_host_endpoint *ep; 593 }; 594 595 extern int usb_hub_clear_tt_buffer(struct urb *urb); 596 extern void usb_ep0_reinit(struct usb_device *); 597 598 /* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */ 599 #define DeviceRequest \ 600 ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8) 601 #define DeviceOutRequest \ 602 ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8) 603 604 #define InterfaceRequest \ 605 ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8) 606 607 #define EndpointRequest \ 608 ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8) 609 #define EndpointOutRequest \ 610 ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8) 611 612 /* class requests from the USB 2.0 hub spec, table 11-15 */ 613 #define HUB_CLASS_REQ(dir, type, request) ((((dir) | (type)) << 8) | (request)) 614 /* GetBusState and SetHubDescriptor are optional, omitted */ 615 #define ClearHubFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_HUB, USB_REQ_CLEAR_FEATURE) 616 #define ClearPortFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, USB_REQ_CLEAR_FEATURE) 617 #define GetHubDescriptor HUB_CLASS_REQ(USB_DIR_IN, USB_RT_HUB, USB_REQ_GET_DESCRIPTOR) 618 #define GetHubStatus HUB_CLASS_REQ(USB_DIR_IN, USB_RT_HUB, USB_REQ_GET_STATUS) 619 #define GetPortStatus HUB_CLASS_REQ(USB_DIR_IN, USB_RT_PORT, USB_REQ_GET_STATUS) 620 #define SetHubFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_HUB, USB_REQ_SET_FEATURE) 621 #define SetPortFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, USB_REQ_SET_FEATURE) 622 #define ClearTTBuffer HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, HUB_CLEAR_TT_BUFFER) 623 #define ResetTT HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, HUB_RESET_TT) 624 #define GetTTState HUB_CLASS_REQ(USB_DIR_IN, USB_RT_PORT, HUB_GET_TT_STATE) 625 #define StopTT HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, HUB_STOP_TT) 626 627 628 /*-------------------------------------------------------------------------*/ 629 630 /* class requests from USB 3.1 hub spec, table 10-7 */ 631 #define SetHubDepth HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_HUB, HUB_SET_DEPTH) 632 #define GetPortErrorCount HUB_CLASS_REQ(USB_DIR_IN, USB_RT_PORT, HUB_GET_PORT_ERR_COUNT) 633 634 /* 635 * Generic bandwidth allocation constants/support 636 */ 637 #define FRAME_TIME_USECS 1000L 638 #define BitTime(bytecount) (7 * 8 * bytecount / 6) /* with integer truncation */ 639 /* Trying not to use worst-case bit-stuffing 640 * of (7/6 * 8 * bytecount) = 9.33 * bytecount */ 641 /* bytecount = data payload byte count */ 642 643 #define NS_TO_US(ns) DIV_ROUND_UP(ns, 1000L) 644 /* convert nanoseconds to microseconds, rounding up */ 645 646 /* 647 * Full/low speed bandwidth allocation constants/support. 648 */ 649 #define BW_HOST_DELAY 1000L /* nanoseconds */ 650 #define BW_HUB_LS_SETUP 333L /* nanoseconds */ 651 /* 4 full-speed bit times (est.) */ 652 653 #define FRAME_TIME_BITS 12000L /* frame = 1 millisecond */ 654 #define FRAME_TIME_MAX_BITS_ALLOC (90L * FRAME_TIME_BITS / 100L) 655 #define FRAME_TIME_MAX_USECS_ALLOC (90L * FRAME_TIME_USECS / 100L) 656 657 /* 658 * Ceiling [nano/micro]seconds (typical) for that many bytes at high speed 659 * ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed 660 * to preallocate bandwidth) 661 */ 662 #define USB2_HOST_DELAY 5 /* nsec, guess */ 663 #define HS_NSECS(bytes) (((55 * 8 * 2083) \ 664 + (2083UL * (3 + BitTime(bytes))))/1000 \ 665 + USB2_HOST_DELAY) 666 #define HS_NSECS_ISO(bytes) (((38 * 8 * 2083) \ 667 + (2083UL * (3 + BitTime(bytes))))/1000 \ 668 + USB2_HOST_DELAY) 669 #define HS_USECS(bytes) NS_TO_US(HS_NSECS(bytes)) 670 #define HS_USECS_ISO(bytes) NS_TO_US(HS_NSECS_ISO(bytes)) 671 672 extern long usb_calc_bus_time(int speed, int is_input, 673 int isoc, int bytecount); 674 675 /*-------------------------------------------------------------------------*/ 676 677 extern void usb_set_device_state(struct usb_device *udev, 678 enum usb_device_state new_state); 679 680 /*-------------------------------------------------------------------------*/ 681 682 /* exported only within usbcore */ 683 684 extern struct idr usb_bus_idr; 685 extern struct mutex usb_bus_idr_lock; 686 extern wait_queue_head_t usb_kill_urb_queue; 687 688 689 #define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN)) 690 691 #ifdef CONFIG_PM 692 extern unsigned usb_wakeup_enabled_descendants(struct usb_device *udev); 693 extern void usb_root_hub_lost_power(struct usb_device *rhdev); 694 extern int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg); 695 extern int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg); 696 extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd); 697 #else usb_wakeup_enabled_descendants(struct usb_device * udev)698 static inline unsigned usb_wakeup_enabled_descendants(struct usb_device *udev) 699 { 700 return 0; 701 } usb_hcd_resume_root_hub(struct usb_hcd * hcd)702 static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd) 703 { 704 return; 705 } 706 #endif /* CONFIG_PM */ 707 708 /*-------------------------------------------------------------------------*/ 709 710 #if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE) 711 712 struct usb_mon_operations { 713 void (*urb_submit)(struct usb_bus *bus, struct urb *urb); 714 void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err); 715 void (*urb_complete)(struct usb_bus *bus, struct urb *urb, int status); 716 /* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */ 717 }; 718 719 extern const struct usb_mon_operations *mon_ops; 720 usbmon_urb_submit(struct usb_bus * bus,struct urb * urb)721 static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) 722 { 723 if (bus->monitored) 724 (*mon_ops->urb_submit)(bus, urb); 725 } 726 usbmon_urb_submit_error(struct usb_bus * bus,struct urb * urb,int error)727 static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb, 728 int error) 729 { 730 if (bus->monitored) 731 (*mon_ops->urb_submit_error)(bus, urb, error); 732 } 733 usbmon_urb_complete(struct usb_bus * bus,struct urb * urb,int status)734 static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb, 735 int status) 736 { 737 if (bus->monitored) 738 (*mon_ops->urb_complete)(bus, urb, status); 739 } 740 741 int usb_mon_register(const struct usb_mon_operations *ops); 742 void usb_mon_deregister(void); 743 744 #else 745 usbmon_urb_submit(struct usb_bus * bus,struct urb * urb)746 static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {} usbmon_urb_submit_error(struct usb_bus * bus,struct urb * urb,int error)747 static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb, 748 int error) {} usbmon_urb_complete(struct usb_bus * bus,struct urb * urb,int status)749 static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb, 750 int status) {} 751 752 #endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */ 753 754 /*-------------------------------------------------------------------------*/ 755 756 /* random stuff */ 757 758 /* This rwsem is for use only by the hub driver and ehci-hcd. 759 * Nobody else should touch it. 760 */ 761 extern struct rw_semaphore ehci_cf_port_reset_rwsem; 762 763 /* Keep track of which host controller drivers are loaded */ 764 #define USB_UHCI_LOADED 0 765 #define USB_OHCI_LOADED 1 766 #define USB_EHCI_LOADED 2 767 extern unsigned long usb_hcds_loaded; 768 769 #endif /* __KERNEL__ */ 770 771 #endif /* __USB_CORE_HCD_H */ 772