/*
* Copyright (c) 2018 The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for
* any purpose with or without fee is hereby granted, provided that the
* above copyright notice and this permission notice appear in all
* copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
* WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
* AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
* DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
* PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
* PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef _RX_MPDU_INFO_H_
#define _RX_MPDU_INFO_H_
#if !defined(__ASSEMBLER__)
#endif
#include "rxpt_classify_info.h"
// ################ START SUMMARY #################
//
// Dword Fields
// 0 rxpcu_mpdu_filter_in_category[1:0], sw_frame_group_id[8:2], ndp_frame[9], phy_err[10], phy_err_during_mpdu_header[11], protocol_version_err[12], ast_based_lookup_valid[13], reserved_0a[15:14], phy_ppdu_id[31:16]
// 1 ast_index[15:0], sw_peer_id[31:16]
// 2 mpdu_frame_control_valid[0], mpdu_duration_valid[1], mac_addr_ad1_valid[2], mac_addr_ad2_valid[3], mac_addr_ad3_valid[4], mac_addr_ad4_valid[5], mpdu_sequence_control_valid[6], mpdu_qos_control_valid[7], mpdu_ht_control_valid[8], frame_encryption_info_valid[9], mpdu_fragment_number[13:10], more_fragment_flag[14], reserved_2a[15], fr_ds[16], to_ds[17], encrypted[18], mpdu_retry[19], mpdu_sequence_number[31:20]
// 3 epd_en[0], all_frames_shall_be_encrypted[1], encrypt_type[5:2], wep_key_width_for_variable_key[7:6], mesh_sta[8], bssid_hit[9], bssid_number[13:10], tid[17:14], reserved_3a[31:18]
// 4 pn_31_0[31:0]
// 5 pn_63_32[31:0]
// 6 pn_95_64[31:0]
// 7 pn_127_96[31:0]
// 8 peer_meta_data[31:0]
// 9 struct rxpt_classify_info rxpt_classify_info_details;
// 10 rx_reo_queue_desc_addr_31_0[31:0]
// 11 rx_reo_queue_desc_addr_39_32[7:0], receive_queue_number[23:8], pre_delim_err_warning[24], first_delim_err[25], reserved_11[31:26]
// 12 key_id_octet[7:0], new_peer_entry[8], decrypt_needed[9], decap_type[11:10], rx_insert_vlan_c_tag_padding[12], rx_insert_vlan_s_tag_padding[13], strip_vlan_c_tag_decap[14], strip_vlan_s_tag_decap[15], pre_delim_count[27:16], ampdu_flag[28], bar_frame[29], reserved_12[31:30]
// 13 mpdu_length[13:0], first_mpdu[14], mcast_bcast[15], ast_index_not_found[16], ast_index_timeout[17], power_mgmt[18], non_qos[19], null_data[20], mgmt_type[21], ctrl_type[22], more_data[23], eosp[24], fragment_flag[25], order[26], u_apsd_trigger[27], encrypt_required[28], directed[29], amsdu_present[30], reserved_13[31]
// 14 mpdu_frame_control_field[15:0], mpdu_duration_field[31:16]
// 15 mac_addr_ad1_31_0[31:0]
// 16 mac_addr_ad1_47_32[15:0], mac_addr_ad2_15_0[31:16]
// 17 mac_addr_ad2_47_16[31:0]
// 18 mac_addr_ad3_31_0[31:0]
// 19 mac_addr_ad3_47_32[15:0], mpdu_sequence_control_field[31:16]
// 20 mac_addr_ad4_31_0[31:0]
// 21 mac_addr_ad4_47_32[15:0], mpdu_qos_control_field[31:16]
// 22 mpdu_ht_control_field[31:0]
//
// ################ END SUMMARY #################
#define NUM_OF_DWORDS_RX_MPDU_INFO 23
struct rx_mpdu_info {
uint32_t rxpcu_mpdu_filter_in_category : 2, //[1:0]
sw_frame_group_id : 7, //[8:2]
ndp_frame : 1, //[9]
phy_err : 1, //[10]
phy_err_during_mpdu_header : 1, //[11]
protocol_version_err : 1, //[12]
ast_based_lookup_valid : 1, //[13]
reserved_0a : 2, //[15:14]
phy_ppdu_id : 16; //[31:16]
uint32_t ast_index : 16, //[15:0]
sw_peer_id : 16; //[31:16]
uint32_t mpdu_frame_control_valid : 1, //[0]
mpdu_duration_valid : 1, //[1]
mac_addr_ad1_valid : 1, //[2]
mac_addr_ad2_valid : 1, //[3]
mac_addr_ad3_valid : 1, //[4]
mac_addr_ad4_valid : 1, //[5]
mpdu_sequence_control_valid : 1, //[6]
mpdu_qos_control_valid : 1, //[7]
mpdu_ht_control_valid : 1, //[8]
frame_encryption_info_valid : 1, //[9]
mpdu_fragment_number : 4, //[13:10]
more_fragment_flag : 1, //[14]
reserved_2a : 1, //[15]
fr_ds : 1, //[16]
to_ds : 1, //[17]
encrypted : 1, //[18]
mpdu_retry : 1, //[19]
mpdu_sequence_number : 12; //[31:20]
uint32_t epd_en : 1, //[0]
all_frames_shall_be_encrypted : 1, //[1]
encrypt_type : 4, //[5:2]
wep_key_width_for_variable_key : 2, //[7:6]
mesh_sta : 1, //[8]
bssid_hit : 1, //[9]
bssid_number : 4, //[13:10]
tid : 4, //[17:14]
reserved_3a : 14; //[31:18]
uint32_t pn_31_0 : 32; //[31:0]
uint32_t pn_63_32 : 32; //[31:0]
uint32_t pn_95_64 : 32; //[31:0]
uint32_t pn_127_96 : 32; //[31:0]
uint32_t peer_meta_data : 32; //[31:0]
struct rxpt_classify_info rxpt_classify_info_details;
uint32_t rx_reo_queue_desc_addr_31_0 : 32; //[31:0]
uint32_t rx_reo_queue_desc_addr_39_32 : 8, //[7:0]
receive_queue_number : 16, //[23:8]
pre_delim_err_warning : 1, //[24]
first_delim_err : 1, //[25]
reserved_11 : 6; //[31:26]
uint32_t key_id_octet : 8, //[7:0]
new_peer_entry : 1, //[8]
decrypt_needed : 1, //[9]
decap_type : 2, //[11:10]
rx_insert_vlan_c_tag_padding : 1, //[12]
rx_insert_vlan_s_tag_padding : 1, //[13]
strip_vlan_c_tag_decap : 1, //[14]
strip_vlan_s_tag_decap : 1, //[15]
pre_delim_count : 12, //[27:16]
ampdu_flag : 1, //[28]
bar_frame : 1, //[29]
reserved_12 : 2; //[31:30]
uint32_t mpdu_length : 14, //[13:0]
first_mpdu : 1, //[14]
mcast_bcast : 1, //[15]
ast_index_not_found : 1, //[16]
ast_index_timeout : 1, //[17]
power_mgmt : 1, //[18]
non_qos : 1, //[19]
null_data : 1, //[20]
mgmt_type : 1, //[21]
ctrl_type : 1, //[22]
more_data : 1, //[23]
eosp : 1, //[24]
fragment_flag : 1, //[25]
order : 1, //[26]
u_apsd_trigger : 1, //[27]
encrypt_required : 1, //[28]
directed : 1, //[29]
amsdu_present : 1, //[30]
reserved_13 : 1; //[31]
uint32_t mpdu_frame_control_field : 16, //[15:0]
mpdu_duration_field : 16; //[31:16]
uint32_t mac_addr_ad1_31_0 : 32; //[31:0]
uint32_t mac_addr_ad1_47_32 : 16, //[15:0]
mac_addr_ad2_15_0 : 16; //[31:16]
uint32_t mac_addr_ad2_47_16 : 32; //[31:0]
uint32_t mac_addr_ad3_31_0 : 32; //[31:0]
uint32_t mac_addr_ad3_47_32 : 16, //[15:0]
mpdu_sequence_control_field : 16; //[31:16]
uint32_t mac_addr_ad4_31_0 : 32; //[31:0]
uint32_t mac_addr_ad4_47_32 : 16, //[15:0]
mpdu_qos_control_field : 16; //[31:16]
uint32_t mpdu_ht_control_field : 32; //[31:0]
};
/*
rxpcu_mpdu_filter_in_category
Field indicates what the reason was that this MPDU frame
was allowed to come into the receive path by RXPCU
<enum 0 rxpcu_filter_pass> This MPDU passed the normal
frame filter programming of rxpcu
<enum 1 rxpcu_monitor_client> This MPDU did NOT pass the
regular frame filter and would have been dropped, were it
not for the frame fitting into the 'monitor_client'
category.
<enum 2 rxpcu_monitor_other> This MPDU did NOT pass the
regular frame filter and also did not pass the
rxpcu_monitor_client filter. It would have been dropped
accept that it did pass the 'monitor_other' category.
Note: for ndp frame, if it was expected because the
preceding NDPA was filter_pass, the setting
rxpcu_filter_pass will be used. This setting will also be
used for every ndp frame in case Promiscuous mode is
enabled.
In case promiscuous is not enabled, and an NDP is not
preceded by a NPDA filter pass frame, the only other setting
that could appear here for the NDP is rxpcu_monitor_other.
(rxpcu has a configuration bit specifically for this
scenario)
Note: for
<legal 0-2>
sw_frame_group_id
SW processes frames based on certain classifications.
This field indicates to what sw classification this MPDU is
mapped.
The classification is given in priority order
<enum 0 sw_frame_group_NDP_frame> Note: The
corresponding Rxpcu_Mpdu_filter_in_category can be
rxpcu_filter_pass or rxpcu_monitor_other
<enum 1 sw_frame_group_Multicast_data>
<enum 2 sw_frame_group_Unicast_data>
<enum 3 sw_frame_group_Null_data > This includes mpdus
of type Data Null as well as QoS Data Null
<enum 4 sw_frame_group_mgmt_0000 >
<enum 5 sw_frame_group_mgmt_0001 >
<enum 6 sw_frame_group_mgmt_0010 >
<enum 7 sw_frame_group_mgmt_0011 >
<enum 8 sw_frame_group_mgmt_0100 >
<enum 9 sw_frame_group_mgmt_0101 >
<enum 10 sw_frame_group_mgmt_0110 >
<enum 11 sw_frame_group_mgmt_0111 >
<enum 12 sw_frame_group_mgmt_1000 >
<enum 13 sw_frame_group_mgmt_1001 >
<enum 14 sw_frame_group_mgmt_1010 >
<enum 15 sw_frame_group_mgmt_1011 >
<enum 16 sw_frame_group_mgmt_1100 >
<enum 17 sw_frame_group_mgmt_1101 >
<enum 18 sw_frame_group_mgmt_1110 >
<enum 19 sw_frame_group_mgmt_1111 >
<enum 20 sw_frame_group_ctrl_0000 >
<enum 21 sw_frame_group_ctrl_0001 >
<enum 22 sw_frame_group_ctrl_0010 >
<enum 23 sw_frame_group_ctrl_0011 >
<enum 24 sw_frame_group_ctrl_0100 >
<enum 25 sw_frame_group_ctrl_0101 >
<enum 26 sw_frame_group_ctrl_0110 >
<enum 27 sw_frame_group_ctrl_0111 >
<enum 28 sw_frame_group_ctrl_1000 >
<enum 29 sw_frame_group_ctrl_1001 >
<enum 30 sw_frame_group_ctrl_1010 >
<enum 31 sw_frame_group_ctrl_1011 >
<enum 32 sw_frame_group_ctrl_1100 >
<enum 33 sw_frame_group_ctrl_1101 >
<enum 34 sw_frame_group_ctrl_1110 >
<enum 35 sw_frame_group_ctrl_1111 >
<enum 36 sw_frame_group_unsupported> This covers type 3
and protocol version != 0
Note: The corresponding Rxpcu_Mpdu_filter_in_category
can only be rxpcu_monitor_other
Note: The corresponding Rxpcu_Mpdu_filter_in_category
can be rxpcu_filter_pass
<legal 0-37>
ndp_frame
When set, the received frame was an NDP frame, and thus
there will be no MPDU data.
<legal all>
phy_err
When set, a PHY error was received before MAC received
any data, and thus there will be no MPDU data.
<legal all>
phy_err_during_mpdu_header
When set, a PHY error was received before MAC received
the complete MPDU header which was needed for proper
decoding
<legal all>
protocol_version_err
Set when RXPCU detected a version error in the Frame
control field
<legal all>
ast_based_lookup_valid
When set, AST based lookup for this frame has found a
valid result.
Note that for NDP frame this will never be set
<legal all>
reserved_0a
<legal 0>
phy_ppdu_id
A ppdu counter value that PHY increments for every PPDU
received. The counter value wraps around
<legal all>
ast_index
This field indicates the index of the AST entry
corresponding to this MPDU. It is provided by the GSE module
instantiated in RXPCU.
A value of 0xFFFF indicates an invalid AST index,
meaning that No AST entry was found or NO AST search was
performed
In case of ndp or phy_err, this field will be set to
0xFFFF
<legal all>
sw_peer_id
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
This field indicates a unique peer identifier. It is set
equal to field 'sw_peer_id' from the AST entry
<legal all>
mpdu_frame_control_valid
When set, the field Mpdu_Frame_control_field has valid
information
<legal all>
mpdu_duration_valid
When set, the field Mpdu_duration_field has valid
information
<legal all>
mac_addr_ad1_valid
When set, the fields mac_addr_ad1_..... have valid
information
<legal all>
mac_addr_ad2_valid
When set, the fields mac_addr_ad2_..... have valid
information
<legal all>
mac_addr_ad3_valid
When set, the fields mac_addr_ad3_..... have valid
information
<legal all>
mac_addr_ad4_valid
When set, the fields mac_addr_ad4_..... have valid
information
<legal all>
mpdu_sequence_control_valid
When set, the fields mpdu_sequence_control_field and
mpdu_sequence_number have valid information as well as field
For MPDUs without a sequence control field, this field
will not be set.
<legal all>
mpdu_qos_control_valid
When set, the field mpdu_qos_control_field has valid
information
For MPDUs without a QoS control field, this field will
not be set.
<legal all>
mpdu_ht_control_valid
When set, the field mpdu_HT_control_field has valid
information
For MPDUs without a HT control field, this field will
not be set.
<legal all>
frame_encryption_info_valid
When set, the encryption related info fields, like IV
and PN are valid
For MPDUs that are not encrypted, this will not be set.
<legal all>
mpdu_fragment_number
Field only valid when Mpdu_sequence_control_valid is set
AND Fragment_flag is set
The fragment number from the 802.11 header
<legal all>
more_fragment_flag
The More Fragment bit setting from the MPDU header of
the received frame
<legal all>
reserved_2a
<legal 0>
fr_ds
Field only valid when Mpdu_frame_control_valid is set
Set if the from DS bit is set in the frame control.
<legal all>
to_ds
Field only valid when Mpdu_frame_control_valid is set
Set if the to DS bit is set in the frame control.
<legal all>
encrypted
Field only valid when Mpdu_frame_control_valid is set.
Protected bit from the frame control.
<legal all>
mpdu_retry
Field only valid when Mpdu_frame_control_valid is set.
Retry bit from the frame control. Only valid when
first_msdu is set.
<legal all>
mpdu_sequence_number
Field only valid when Mpdu_sequence_control_valid is
set.
The sequence number from the 802.11 header.
<legal all>
epd_en
Field only valid when AST_based_lookup_valid == 1.
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
If set to one use EPD instead of LPD
<legal all>
all_frames_shall_be_encrypted
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
When set, all frames (data only ?) shall be encrypted.
If not, RX CRYPTO shall set an error flag.
<legal all>
encrypt_type
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
Indicates type of decrypt cipher used (as defined in the
peer entry)
<enum 0 wep_40> WEP 40-bit
<enum 1 wep_104> WEP 104-bit
<enum 2 tkip_no_mic> TKIP without MIC
<enum 3 wep_128> WEP 128-bit
<enum 4 tkip_with_mic> TKIP with MIC
<enum 5 wapi> WAPI
<enum 6 aes_ccmp_128> AES CCMP 128
<enum 7 no_cipher> No crypto
<enum 8 aes_ccmp_256> AES CCMP 256
<enum 9 aes_gcmp_128> AES CCMP 128
<enum 10 aes_gcmp_256> AES CCMP 256
<enum 11 wapi_gcm_sm4> WAPI GCM SM4
<enum 12 wep_varied_width> WEP encryption. As for WEP
per keyid the key bit width can vary, the key bit width for
this MPDU will be indicated in field
wep_key_width_for_variable key
<legal 0-12>
wep_key_width_for_variable_key
Field only valid when key_type is set to
wep_varied_width.
This field indicates the size of the wep key for this
MPDU.
<enum 0 wep_varied_width_40> WEP 40-bit
<enum 1 wep_varied_width_104> WEP 104-bit
<enum 2 wep_varied_width_128> WEP 128-bit
<legal 0-2>
mesh_sta
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
When set, this is a Mesh (11s) STA
<legal all>
bssid_hit
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
When set, the BSSID of the incoming frame matched one of
the 8 BSSID register values
<legal all>
bssid_number
Field only valid when bssid_hit is set.
This number indicates which one out of the 8 BSSID
register values matched the incoming frame
<legal all>
tid
Field only valid when mpdu_qos_control_valid is set
The TID field in the QoS control field
<legal all>
reserved_3a
<legal 0>
pn_31_0
WEP: IV = {key_id_octet, pn2, pn1, pn0}. Only pn[23:0]
is valid.
TKIP: IV = {pn5, pn4, pn3, pn2, key_id_octet, pn0,
WEPSeed[1], pn1}. Only pn[47:0] is valid.
AES-CCM: IV = {pn5, pn4, pn3, pn2, key_id_octet, 0x0,
pn1, pn0}. Only pn[47:0] is valid.
WAPI: IV = {key_id_octet, 0x0, pn15, pn14, pn13, pn12,
pn11, pn10, pn9, pn8, pn7, pn6, pn5, pn4, pn3, pn2, pn1,
pn0}. pn[127:0] are valid.
pn_63_32
Bits [63:32] of the PN number. See description for
pn_31_0.
pn_95_64
Bits [95:64] of the PN number. See description for
pn_31_0.
pn_127_96
Bits [127:96] of the PN number. See description for
pn_31_0.
peer_meta_data
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
Meta data that SW has programmed in the Peer table entry
of the transmitting STA.
<legal all>
struct rxpt_classify_info rxpt_classify_info_details
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
RXOLE related classification info
<legal all
rx_reo_queue_desc_addr_31_0
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
Address (lower 32 bits) of the REO queue descriptor.
If no Peer entry lookup happened for this frame, the
value wil be set to 0, and the frame shall never be pushed
to REO entrance ring.
<legal all>
rx_reo_queue_desc_addr_39_32
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
Address (upper 8 bits) of the REO queue descriptor.
If no Peer entry lookup happened for this frame, the
value wil be set to 0, and the frame shall never be pushed
to REO entrance ring.
<legal all>
receive_queue_number
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
Indicates the MPDU queue ID to which this MPDU link
descriptor belongs
Used for tracking and debugging
<legal all>
pre_delim_err_warning
Indicates that a delimiter FCS error was found in
between the Previous MPDU and this MPDU.
Note that this is just a warning, and does not mean that
this MPDU is corrupted in any way. If it is, there will be
other errors indicated such as FCS or decrypt errors
In case of ndp or phy_err, this field will indicate at
least one of delimiters located after the last MPDU in the
previous PPDU has been corrupted.
first_delim_err
Indicates that the first delimiter had a FCS failure.
Only valid when first_mpdu and first_msdu are set.
reserved_11
<legal 0>
key_id_octet
The key ID octet from the IV.
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
<legal all>
new_peer_entry
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
Set if new RX_PEER_ENTRY TLV follows. If clear,
RX_PEER_ENTRY doesn't follow so RX DECRYPTION module either
uses old peer entry or not decrypt.
<legal all>
decrypt_needed
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
Set if decryption is needed.
Note:
When RXPCU sets bit 'ast_index_not_found' and/or
ast_index_timeout', RXPCU will also ensure that this bit is
NOT set
CRYPTO for that reason only needs to evaluate this bit
and non of the other ones.
<legal all>
decap_type
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
Used by the OLE during decapsulation.
Indicates the decapsulation that HW will perform:
<enum 0 RAW> No encapsulation
<enum 1 Native_WiFi>
<enum 2 Ethernet> Ethernet 2 (DIX) or 802.3 (uses
SNAP/LLC)
<enum 3 802_3> Indicate Ethernet
<legal all>
rx_insert_vlan_c_tag_padding
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
Insert 4 byte of all zeros as VLAN tag if the rx payload
does not have VLAN. Used during decapsulation.
<legal all>
rx_insert_vlan_s_tag_padding
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
Insert 4 byte of all zeros as double VLAN tag if the rx
payload does not have VLAN. Used during
<legal all>
strip_vlan_c_tag_decap
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
Strip the VLAN during decapsulation. Used by the OLE.
<legal all>
strip_vlan_s_tag_decap
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
Strip the double VLAN during decapsulation. Used by
the OLE.
<legal all>
pre_delim_count
The number of delimiters before this MPDU.
Note that this number is cleared at PPDU start.
If this MPDU is the first received MPDU in the PPDU and
this MPDU gets filtered-in, this field will indicate the
number of delimiters located after the last MPDU in the
previous PPDU.
If this MPDU is located after the first received MPDU in
an PPDU, this field will indicate the number of delimiters
located between the previous MPDU and this MPDU.
In case of ndp or phy_err, this field will indicate the
number of delimiters located after the last MPDU in the
previous PPDU.
<legal all>
ampdu_flag
When set, received frame was part of an A-MPDU.
<legal all>
bar_frame
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
When set, received frame is a BAR frame
<legal all>
reserved_12
<legal 0>.
mpdu_length
In case of ndp or phy_err this field will be set to 0
MPDU length before decapsulation.
<legal all>
first_mpdu
See definition in RX attention descriptor
In case of ndp or phy_err, this field will be set. Note
however that there will not actually be any data contents in
the MPDU.
<legal all>
mcast_bcast
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 0
See definition in RX attention descriptor
<legal all>
ast_index_not_found
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 0
See definition in RX attention descriptor
<legal all>
ast_index_timeout
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 0
See definition in RX attention descriptor
<legal all>
power_mgmt
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 0
See definition in RX attention descriptor
<legal all>
non_qos
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 1
See definition in RX attention descriptor
<legal all>
null_data
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 0
See definition in RX attention descriptor
<legal all>
mgmt_type
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 0
See definition in RX attention descriptor
<legal all>
ctrl_type
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 0
See definition in RX attention descriptor
<legal all>
more_data
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 0
See definition in RX attention descriptor
<legal all>
eosp
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 0
See definition in RX attention descriptor
<legal all>
fragment_flag
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 0
See definition in RX attention descriptor
<legal all>
order
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 0
See definition in RX attention descriptor
<legal all>
u_apsd_trigger
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 0
See definition in RX attention descriptor
<legal all>
encrypt_required
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 0
See definition in RX attention descriptor
<legal all>
directed
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 0
See definition in RX attention descriptor
<legal all>
amsdu_present
Field only valid when Mpdu_qos_control_valid is set
The 'amsdu_present' bit within the QoS control field of
the MPDU
<legal all>
reserved_13
<legal 0>
mpdu_frame_control_field
Field only valid when Mpdu_frame_control_valid is set
The frame control field of this received MPDU.
Field only valid when Ndp_frame and phy_err are NOT set
Bytes 0 + 1 of the received MPDU
<legal all>
mpdu_duration_field
Field only valid when Mpdu_duration_valid is set
The duration field of this received MPDU.
<legal all>
mac_addr_ad1_31_0
Field only valid when mac_addr_ad1_valid is set
The Least Significant 4 bytes of the Received Frames MAC
Address AD1
<legal all>
mac_addr_ad1_47_32
Field only valid when mac_addr_ad1_valid is set
The 2 most significant bytes of the Received Frames MAC
Address AD1
<legal all>
mac_addr_ad2_15_0
Field only valid when mac_addr_ad2_valid is set
The Least Significant 2 bytes of the Received Frames MAC
Address AD2
<legal all>
mac_addr_ad2_47_16
Field only valid when mac_addr_ad2_valid is set
The 4 most significant bytes of the Received Frames MAC
Address AD2
<legal all>
mac_addr_ad3_31_0
Field only valid when mac_addr_ad3_valid is set
The Least Significant 4 bytes of the Received Frames MAC
Address AD3
<legal all>
mac_addr_ad3_47_32
Field only valid when mac_addr_ad3_valid is set
The 2 most significant bytes of the Received Frames MAC
Address AD3
<legal all>
mpdu_sequence_control_field
The sequence control field of the MPDU
<legal all>
mac_addr_ad4_31_0
Field only valid when mac_addr_ad4_valid is set
The Least Significant 4 bytes of the Received Frames MAC
Address AD4
<legal all>
mac_addr_ad4_47_32
Field only valid when mac_addr_ad4_valid is set
The 2 most significant bytes of the Received Frames MAC
Address AD4
<legal all>
mpdu_qos_control_field
Field only valid when mpdu_qos_control_valid is set
The sequence control field of the MPDU
<legal all>
mpdu_ht_control_field
Field only valid when mpdu_qos_control_valid is set
The HT control field of the MPDU
<legal all>
*/
/* Description RX_MPDU_INFO_0_RXPCU_MPDU_FILTER_IN_CATEGORY
Field indicates what the reason was that this MPDU frame
was allowed to come into the receive path by RXPCU
<enum 0 rxpcu_filter_pass> This MPDU passed the normal
frame filter programming of rxpcu
<enum 1 rxpcu_monitor_client> This MPDU did NOT pass the
regular frame filter and would have been dropped, were it
not for the frame fitting into the 'monitor_client'
category.
<enum 2 rxpcu_monitor_other> This MPDU did NOT pass the
regular frame filter and also did not pass the
rxpcu_monitor_client filter. It would have been dropped
accept that it did pass the 'monitor_other' category.
Note: for ndp frame, if it was expected because the
preceding NDPA was filter_pass, the setting
rxpcu_filter_pass will be used. This setting will also be
used for every ndp frame in case Promiscuous mode is
enabled.
In case promiscuous is not enabled, and an NDP is not
preceded by a NPDA filter pass frame, the only other setting
that could appear here for the NDP is rxpcu_monitor_other.
(rxpcu has a configuration bit specifically for this
scenario)
Note: for
<legal 0-2>
*/
#define RX_MPDU_INFO_0_RXPCU_MPDU_FILTER_IN_CATEGORY_OFFSET 0x00000000
#define RX_MPDU_INFO_0_RXPCU_MPDU_FILTER_IN_CATEGORY_LSB 0
#define RX_MPDU_INFO_0_RXPCU_MPDU_FILTER_IN_CATEGORY_MASK 0x00000003
/* Description RX_MPDU_INFO_0_SW_FRAME_GROUP_ID
SW processes frames based on certain classifications.
This field indicates to what sw classification this MPDU is
mapped.
The classification is given in priority order
<enum 0 sw_frame_group_NDP_frame> Note: The
corresponding Rxpcu_Mpdu_filter_in_category can be
rxpcu_filter_pass or rxpcu_monitor_other
<enum 1 sw_frame_group_Multicast_data>
<enum 2 sw_frame_group_Unicast_data>
<enum 3 sw_frame_group_Null_data > This includes mpdus
of type Data Null as well as QoS Data Null
<enum 4 sw_frame_group_mgmt_0000 >
<enum 5 sw_frame_group_mgmt_0001 >
<enum 6 sw_frame_group_mgmt_0010 >
<enum 7 sw_frame_group_mgmt_0011 >
<enum 8 sw_frame_group_mgmt_0100 >
<enum 9 sw_frame_group_mgmt_0101 >
<enum 10 sw_frame_group_mgmt_0110 >
<enum 11 sw_frame_group_mgmt_0111 >
<enum 12 sw_frame_group_mgmt_1000 >
<enum 13 sw_frame_group_mgmt_1001 >
<enum 14 sw_frame_group_mgmt_1010 >
<enum 15 sw_frame_group_mgmt_1011 >
<enum 16 sw_frame_group_mgmt_1100 >
<enum 17 sw_frame_group_mgmt_1101 >
<enum 18 sw_frame_group_mgmt_1110 >
<enum 19 sw_frame_group_mgmt_1111 >
<enum 20 sw_frame_group_ctrl_0000 >
<enum 21 sw_frame_group_ctrl_0001 >
<enum 22 sw_frame_group_ctrl_0010 >
<enum 23 sw_frame_group_ctrl_0011 >
<enum 24 sw_frame_group_ctrl_0100 >
<enum 25 sw_frame_group_ctrl_0101 >
<enum 26 sw_frame_group_ctrl_0110 >
<enum 27 sw_frame_group_ctrl_0111 >
<enum 28 sw_frame_group_ctrl_1000 >
<enum 29 sw_frame_group_ctrl_1001 >
<enum 30 sw_frame_group_ctrl_1010 >
<enum 31 sw_frame_group_ctrl_1011 >
<enum 32 sw_frame_group_ctrl_1100 >
<enum 33 sw_frame_group_ctrl_1101 >
<enum 34 sw_frame_group_ctrl_1110 >
<enum 35 sw_frame_group_ctrl_1111 >
<enum 36 sw_frame_group_unsupported> This covers type 3
and protocol version != 0
Note: The corresponding Rxpcu_Mpdu_filter_in_category
can only be rxpcu_monitor_other
Note: The corresponding Rxpcu_Mpdu_filter_in_category
can be rxpcu_filter_pass
<legal 0-37>
*/
#define RX_MPDU_INFO_0_SW_FRAME_GROUP_ID_OFFSET 0x00000000
#define RX_MPDU_INFO_0_SW_FRAME_GROUP_ID_LSB 2
#define RX_MPDU_INFO_0_SW_FRAME_GROUP_ID_MASK 0x000001fc
/* Description RX_MPDU_INFO_0_NDP_FRAME
When set, the received frame was an NDP frame, and thus
there will be no MPDU data.
<legal all>
*/
#define RX_MPDU_INFO_0_NDP_FRAME_OFFSET 0x00000000
#define RX_MPDU_INFO_0_NDP_FRAME_LSB 9
#define RX_MPDU_INFO_0_NDP_FRAME_MASK 0x00000200
/* Description RX_MPDU_INFO_0_PHY_ERR
When set, a PHY error was received before MAC received
any data, and thus there will be no MPDU data.
<legal all>
*/
#define RX_MPDU_INFO_0_PHY_ERR_OFFSET 0x00000000
#define RX_MPDU_INFO_0_PHY_ERR_LSB 10
#define RX_MPDU_INFO_0_PHY_ERR_MASK 0x00000400
/* Description RX_MPDU_INFO_0_PHY_ERR_DURING_MPDU_HEADER
When set, a PHY error was received before MAC received
the complete MPDU header which was needed for proper
decoding
<legal all>
*/
#define RX_MPDU_INFO_0_PHY_ERR_DURING_MPDU_HEADER_OFFSET 0x00000000
#define RX_MPDU_INFO_0_PHY_ERR_DURING_MPDU_HEADER_LSB 11
#define RX_MPDU_INFO_0_PHY_ERR_DURING_MPDU_HEADER_MASK 0x00000800
/* Description RX_MPDU_INFO_0_PROTOCOL_VERSION_ERR
Set when RXPCU detected a version error in the Frame
control field
<legal all>
*/
#define RX_MPDU_INFO_0_PROTOCOL_VERSION_ERR_OFFSET 0x00000000
#define RX_MPDU_INFO_0_PROTOCOL_VERSION_ERR_LSB 12
#define RX_MPDU_INFO_0_PROTOCOL_VERSION_ERR_MASK 0x00001000
/* Description RX_MPDU_INFO_0_AST_BASED_LOOKUP_VALID
When set, AST based lookup for this frame has found a
valid result.
Note that for NDP frame this will never be set
<legal all>
*/
#define RX_MPDU_INFO_0_AST_BASED_LOOKUP_VALID_OFFSET 0x00000000
#define RX_MPDU_INFO_0_AST_BASED_LOOKUP_VALID_LSB 13
#define RX_MPDU_INFO_0_AST_BASED_LOOKUP_VALID_MASK 0x00002000
/* Description RX_MPDU_INFO_0_RESERVED_0A
<legal 0>
*/
#define RX_MPDU_INFO_0_RESERVED_0A_OFFSET 0x00000000
#define RX_MPDU_INFO_0_RESERVED_0A_LSB 14
#define RX_MPDU_INFO_0_RESERVED_0A_MASK 0x0000c000
/* Description RX_MPDU_INFO_0_PHY_PPDU_ID
A ppdu counter value that PHY increments for every PPDU
received. The counter value wraps around
<legal all>
*/
#define RX_MPDU_INFO_0_PHY_PPDU_ID_OFFSET 0x00000000
#define RX_MPDU_INFO_0_PHY_PPDU_ID_LSB 16
#define RX_MPDU_INFO_0_PHY_PPDU_ID_MASK 0xffff0000
/* Description RX_MPDU_INFO_1_AST_INDEX
This field indicates the index of the AST entry
corresponding to this MPDU. It is provided by the GSE module
instantiated in RXPCU.
A value of 0xFFFF indicates an invalid AST index,
meaning that No AST entry was found or NO AST search was
performed
In case of ndp or phy_err, this field will be set to
0xFFFF
<legal all>
*/
#define RX_MPDU_INFO_1_AST_INDEX_OFFSET 0x00000004
#define RX_MPDU_INFO_1_AST_INDEX_LSB 0
#define RX_MPDU_INFO_1_AST_INDEX_MASK 0x0000ffff
/* Description RX_MPDU_INFO_1_SW_PEER_ID
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
This field indicates a unique peer identifier. It is set
equal to field 'sw_peer_id' from the AST entry
<legal all>
*/
#define RX_MPDU_INFO_1_SW_PEER_ID_OFFSET 0x00000004
#define RX_MPDU_INFO_1_SW_PEER_ID_LSB 16
#define RX_MPDU_INFO_1_SW_PEER_ID_MASK 0xffff0000
/* Description RX_MPDU_INFO_2_MPDU_FRAME_CONTROL_VALID
When set, the field Mpdu_Frame_control_field has valid
information
<legal all>
*/
#define RX_MPDU_INFO_2_MPDU_FRAME_CONTROL_VALID_OFFSET 0x00000008
#define RX_MPDU_INFO_2_MPDU_FRAME_CONTROL_VALID_LSB 0
#define RX_MPDU_INFO_2_MPDU_FRAME_CONTROL_VALID_MASK 0x00000001
/* Description RX_MPDU_INFO_2_MPDU_DURATION_VALID
When set, the field Mpdu_duration_field has valid
information
<legal all>
*/
#define RX_MPDU_INFO_2_MPDU_DURATION_VALID_OFFSET 0x00000008
#define RX_MPDU_INFO_2_MPDU_DURATION_VALID_LSB 1
#define RX_MPDU_INFO_2_MPDU_DURATION_VALID_MASK 0x00000002
/* Description RX_MPDU_INFO_2_MAC_ADDR_AD1_VALID
When set, the fields mac_addr_ad1_..... have valid
information
<legal all>
*/
#define RX_MPDU_INFO_2_MAC_ADDR_AD1_VALID_OFFSET 0x00000008
#define RX_MPDU_INFO_2_MAC_ADDR_AD1_VALID_LSB 2
#define RX_MPDU_INFO_2_MAC_ADDR_AD1_VALID_MASK 0x00000004
/* Description RX_MPDU_INFO_2_MAC_ADDR_AD2_VALID
When set, the fields mac_addr_ad2_..... have valid
information
<legal all>
*/
#define RX_MPDU_INFO_2_MAC_ADDR_AD2_VALID_OFFSET 0x00000008
#define RX_MPDU_INFO_2_MAC_ADDR_AD2_VALID_LSB 3
#define RX_MPDU_INFO_2_MAC_ADDR_AD2_VALID_MASK 0x00000008
/* Description RX_MPDU_INFO_2_MAC_ADDR_AD3_VALID
When set, the fields mac_addr_ad3_..... have valid
information
<legal all>
*/
#define RX_MPDU_INFO_2_MAC_ADDR_AD3_VALID_OFFSET 0x00000008
#define RX_MPDU_INFO_2_MAC_ADDR_AD3_VALID_LSB 4
#define RX_MPDU_INFO_2_MAC_ADDR_AD3_VALID_MASK 0x00000010
/* Description RX_MPDU_INFO_2_MAC_ADDR_AD4_VALID
When set, the fields mac_addr_ad4_..... have valid
information
<legal all>
*/
#define RX_MPDU_INFO_2_MAC_ADDR_AD4_VALID_OFFSET 0x00000008
#define RX_MPDU_INFO_2_MAC_ADDR_AD4_VALID_LSB 5
#define RX_MPDU_INFO_2_MAC_ADDR_AD4_VALID_MASK 0x00000020
/* Description RX_MPDU_INFO_2_MPDU_SEQUENCE_CONTROL_VALID
When set, the fields mpdu_sequence_control_field and
mpdu_sequence_number have valid information as well as field
For MPDUs without a sequence control field, this field
will not be set.
<legal all>
*/
#define RX_MPDU_INFO_2_MPDU_SEQUENCE_CONTROL_VALID_OFFSET 0x00000008
#define RX_MPDU_INFO_2_MPDU_SEQUENCE_CONTROL_VALID_LSB 6
#define RX_MPDU_INFO_2_MPDU_SEQUENCE_CONTROL_VALID_MASK 0x00000040
/* Description RX_MPDU_INFO_2_MPDU_QOS_CONTROL_VALID
When set, the field mpdu_qos_control_field has valid
information
For MPDUs without a QoS control field, this field will
not be set.
<legal all>
*/
#define RX_MPDU_INFO_2_MPDU_QOS_CONTROL_VALID_OFFSET 0x00000008
#define RX_MPDU_INFO_2_MPDU_QOS_CONTROL_VALID_LSB 7
#define RX_MPDU_INFO_2_MPDU_QOS_CONTROL_VALID_MASK 0x00000080
/* Description RX_MPDU_INFO_2_MPDU_HT_CONTROL_VALID
When set, the field mpdu_HT_control_field has valid
information
For MPDUs without a HT control field, this field will
not be set.
<legal all>
*/
#define RX_MPDU_INFO_2_MPDU_HT_CONTROL_VALID_OFFSET 0x00000008
#define RX_MPDU_INFO_2_MPDU_HT_CONTROL_VALID_LSB 8
#define RX_MPDU_INFO_2_MPDU_HT_CONTROL_VALID_MASK 0x00000100
/* Description RX_MPDU_INFO_2_FRAME_ENCRYPTION_INFO_VALID
When set, the encryption related info fields, like IV
and PN are valid
For MPDUs that are not encrypted, this will not be set.
<legal all>
*/
#define RX_MPDU_INFO_2_FRAME_ENCRYPTION_INFO_VALID_OFFSET 0x00000008
#define RX_MPDU_INFO_2_FRAME_ENCRYPTION_INFO_VALID_LSB 9
#define RX_MPDU_INFO_2_FRAME_ENCRYPTION_INFO_VALID_MASK 0x00000200
/* Description RX_MPDU_INFO_2_MPDU_FRAGMENT_NUMBER
Field only valid when Mpdu_sequence_control_valid is set
AND Fragment_flag is set
The fragment number from the 802.11 header
<legal all>
*/
#define RX_MPDU_INFO_2_MPDU_FRAGMENT_NUMBER_OFFSET 0x00000008
#define RX_MPDU_INFO_2_MPDU_FRAGMENT_NUMBER_LSB 10
#define RX_MPDU_INFO_2_MPDU_FRAGMENT_NUMBER_MASK 0x00003c00
/* Description RX_MPDU_INFO_2_MORE_FRAGMENT_FLAG
The More Fragment bit setting from the MPDU header of
the received frame
<legal all>
*/
#define RX_MPDU_INFO_2_MORE_FRAGMENT_FLAG_OFFSET 0x00000008
#define RX_MPDU_INFO_2_MORE_FRAGMENT_FLAG_LSB 14
#define RX_MPDU_INFO_2_MORE_FRAGMENT_FLAG_MASK 0x00004000
/* Description RX_MPDU_INFO_2_RESERVED_2A
<legal 0>
*/
#define RX_MPDU_INFO_2_RESERVED_2A_OFFSET 0x00000008
#define RX_MPDU_INFO_2_RESERVED_2A_LSB 15
#define RX_MPDU_INFO_2_RESERVED_2A_MASK 0x00008000
/* Description RX_MPDU_INFO_2_FR_DS
Field only valid when Mpdu_frame_control_valid is set
Set if the from DS bit is set in the frame control.
<legal all>
*/
#define RX_MPDU_INFO_2_FR_DS_OFFSET 0x00000008
#define RX_MPDU_INFO_2_FR_DS_LSB 16
#define RX_MPDU_INFO_2_FR_DS_MASK 0x00010000
/* Description RX_MPDU_INFO_2_TO_DS
Field only valid when Mpdu_frame_control_valid is set
Set if the to DS bit is set in the frame control.
<legal all>
*/
#define RX_MPDU_INFO_2_TO_DS_OFFSET 0x00000008
#define RX_MPDU_INFO_2_TO_DS_LSB 17
#define RX_MPDU_INFO_2_TO_DS_MASK 0x00020000
/* Description RX_MPDU_INFO_2_ENCRYPTED
Field only valid when Mpdu_frame_control_valid is set.
Protected bit from the frame control.
<legal all>
*/
#define RX_MPDU_INFO_2_ENCRYPTED_OFFSET 0x00000008
#define RX_MPDU_INFO_2_ENCRYPTED_LSB 18
#define RX_MPDU_INFO_2_ENCRYPTED_MASK 0x00040000
/* Description RX_MPDU_INFO_2_MPDU_RETRY
Field only valid when Mpdu_frame_control_valid is set.
Retry bit from the frame control. Only valid when
first_msdu is set.
<legal all>
*/
#define RX_MPDU_INFO_2_MPDU_RETRY_OFFSET 0x00000008
#define RX_MPDU_INFO_2_MPDU_RETRY_LSB 19
#define RX_MPDU_INFO_2_MPDU_RETRY_MASK 0x00080000
/* Description RX_MPDU_INFO_2_MPDU_SEQUENCE_NUMBER
Field only valid when Mpdu_sequence_control_valid is
set.
The sequence number from the 802.11 header.
<legal all>
*/
#define RX_MPDU_INFO_2_MPDU_SEQUENCE_NUMBER_OFFSET 0x00000008
#define RX_MPDU_INFO_2_MPDU_SEQUENCE_NUMBER_LSB 20
#define RX_MPDU_INFO_2_MPDU_SEQUENCE_NUMBER_MASK 0xfff00000
/* Description RX_MPDU_INFO_3_EPD_EN
Field only valid when AST_based_lookup_valid == 1.
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
If set to one use EPD instead of LPD
<legal all>
*/
#define RX_MPDU_INFO_3_EPD_EN_OFFSET 0x0000000c
#define RX_MPDU_INFO_3_EPD_EN_LSB 0
#define RX_MPDU_INFO_3_EPD_EN_MASK 0x00000001
/* Description RX_MPDU_INFO_3_ALL_FRAMES_SHALL_BE_ENCRYPTED
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
When set, all frames (data only ?) shall be encrypted.
If not, RX CRYPTO shall set an error flag.
<legal all>
*/
#define RX_MPDU_INFO_3_ALL_FRAMES_SHALL_BE_ENCRYPTED_OFFSET 0x0000000c
#define RX_MPDU_INFO_3_ALL_FRAMES_SHALL_BE_ENCRYPTED_LSB 1
#define RX_MPDU_INFO_3_ALL_FRAMES_SHALL_BE_ENCRYPTED_MASK 0x00000002
/* Description RX_MPDU_INFO_3_ENCRYPT_TYPE
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
Indicates type of decrypt cipher used (as defined in the
peer entry)
<enum 0 wep_40> WEP 40-bit
<enum 1 wep_104> WEP 104-bit
<enum 2 tkip_no_mic> TKIP without MIC
<enum 3 wep_128> WEP 128-bit
<enum 4 tkip_with_mic> TKIP with MIC
<enum 5 wapi> WAPI
<enum 6 aes_ccmp_128> AES CCMP 128
<enum 7 no_cipher> No crypto
<enum 8 aes_ccmp_256> AES CCMP 256
<enum 9 aes_gcmp_128> AES CCMP 128
<enum 10 aes_gcmp_256> AES CCMP 256
<enum 11 wapi_gcm_sm4> WAPI GCM SM4
<enum 12 wep_varied_width> WEP encryption. As for WEP
per keyid the key bit width can vary, the key bit width for
this MPDU will be indicated in field
wep_key_width_for_variable key
<legal 0-12>
*/
#define RX_MPDU_INFO_3_ENCRYPT_TYPE_OFFSET 0x0000000c
#define RX_MPDU_INFO_3_ENCRYPT_TYPE_LSB 2
#define RX_MPDU_INFO_3_ENCRYPT_TYPE_MASK 0x0000003c
/* Description RX_MPDU_INFO_3_WEP_KEY_WIDTH_FOR_VARIABLE_KEY
Field only valid when key_type is set to
wep_varied_width.
This field indicates the size of the wep key for this
MPDU.
<enum 0 wep_varied_width_40> WEP 40-bit
<enum 1 wep_varied_width_104> WEP 104-bit
<enum 2 wep_varied_width_128> WEP 128-bit
<legal 0-2>
*/
#define RX_MPDU_INFO_3_WEP_KEY_WIDTH_FOR_VARIABLE_KEY_OFFSET 0x0000000c
#define RX_MPDU_INFO_3_WEP_KEY_WIDTH_FOR_VARIABLE_KEY_LSB 6
#define RX_MPDU_INFO_3_WEP_KEY_WIDTH_FOR_VARIABLE_KEY_MASK 0x000000c0
/* Description RX_MPDU_INFO_3_MESH_STA
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
When set, this is a Mesh (11s) STA
<legal all>
*/
#define RX_MPDU_INFO_3_MESH_STA_OFFSET 0x0000000c
#define RX_MPDU_INFO_3_MESH_STA_LSB 8
#define RX_MPDU_INFO_3_MESH_STA_MASK 0x00000100
/* Description RX_MPDU_INFO_3_BSSID_HIT
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
When set, the BSSID of the incoming frame matched one of
the 8 BSSID register values
<legal all>
*/
#define RX_MPDU_INFO_3_BSSID_HIT_OFFSET 0x0000000c
#define RX_MPDU_INFO_3_BSSID_HIT_LSB 9
#define RX_MPDU_INFO_3_BSSID_HIT_MASK 0x00000200
/* Description RX_MPDU_INFO_3_BSSID_NUMBER
Field only valid when bssid_hit is set.
This number indicates which one out of the 8 BSSID
register values matched the incoming frame
<legal all>
*/
#define RX_MPDU_INFO_3_BSSID_NUMBER_OFFSET 0x0000000c
#define RX_MPDU_INFO_3_BSSID_NUMBER_LSB 10
#define RX_MPDU_INFO_3_BSSID_NUMBER_MASK 0x00003c00
/* Description RX_MPDU_INFO_3_TID
Field only valid when mpdu_qos_control_valid is set
The TID field in the QoS control field
<legal all>
*/
#define RX_MPDU_INFO_3_TID_OFFSET 0x0000000c
#define RX_MPDU_INFO_3_TID_LSB 14
#define RX_MPDU_INFO_3_TID_MASK 0x0003c000
/* Description RX_MPDU_INFO_3_RESERVED_3A
<legal 0>
*/
#define RX_MPDU_INFO_3_RESERVED_3A_OFFSET 0x0000000c
#define RX_MPDU_INFO_3_RESERVED_3A_LSB 18
#define RX_MPDU_INFO_3_RESERVED_3A_MASK 0xfffc0000
/* Description RX_MPDU_INFO_4_PN_31_0
WEP: IV = {key_id_octet, pn2, pn1, pn0}. Only pn[23:0]
is valid.
TKIP: IV = {pn5, pn4, pn3, pn2, key_id_octet, pn0,
WEPSeed[1], pn1}. Only pn[47:0] is valid.
AES-CCM: IV = {pn5, pn4, pn3, pn2, key_id_octet, 0x0,
pn1, pn0}. Only pn[47:0] is valid.
WAPI: IV = {key_id_octet, 0x0, pn15, pn14, pn13, pn12,
pn11, pn10, pn9, pn8, pn7, pn6, pn5, pn4, pn3, pn2, pn1,
pn0}. pn[127:0] are valid.
*/
#define RX_MPDU_INFO_4_PN_31_0_OFFSET 0x00000010
#define RX_MPDU_INFO_4_PN_31_0_LSB 0
#define RX_MPDU_INFO_4_PN_31_0_MASK 0xffffffff
/* Description RX_MPDU_INFO_5_PN_63_32
Bits [63:32] of the PN number. See description for
pn_31_0.
*/
#define RX_MPDU_INFO_5_PN_63_32_OFFSET 0x00000014
#define RX_MPDU_INFO_5_PN_63_32_LSB 0
#define RX_MPDU_INFO_5_PN_63_32_MASK 0xffffffff
/* Description RX_MPDU_INFO_6_PN_95_64
Bits [95:64] of the PN number. See description for
pn_31_0.
*/
#define RX_MPDU_INFO_6_PN_95_64_OFFSET 0x00000018
#define RX_MPDU_INFO_6_PN_95_64_LSB 0
#define RX_MPDU_INFO_6_PN_95_64_MASK 0xffffffff
/* Description RX_MPDU_INFO_7_PN_127_96
Bits [127:96] of the PN number. See description for
pn_31_0.
*/
#define RX_MPDU_INFO_7_PN_127_96_OFFSET 0x0000001c
#define RX_MPDU_INFO_7_PN_127_96_LSB 0
#define RX_MPDU_INFO_7_PN_127_96_MASK 0xffffffff
/* Description RX_MPDU_INFO_8_PEER_META_DATA
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
Meta data that SW has programmed in the Peer table entry
of the transmitting STA.
<legal all>
*/
#define RX_MPDU_INFO_8_PEER_META_DATA_OFFSET 0x00000020
#define RX_MPDU_INFO_8_PEER_META_DATA_LSB 0
#define RX_MPDU_INFO_8_PEER_META_DATA_MASK 0xffffffff
#define RX_MPDU_INFO_9_RXPT_CLASSIFY_INFO_RXPT_CLASSIFY_INFO_DETAILS_OFFSET 0x00000024
#define RX_MPDU_INFO_9_RXPT_CLASSIFY_INFO_RXPT_CLASSIFY_INFO_DETAILS_LSB 0
#define RX_MPDU_INFO_9_RXPT_CLASSIFY_INFO_RXPT_CLASSIFY_INFO_DETAILS_MASK 0xffffffff
/* Description RX_MPDU_INFO_10_RX_REO_QUEUE_DESC_ADDR_31_0
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
Address (lower 32 bits) of the REO queue descriptor.
If no Peer entry lookup happened for this frame, the
value wil be set to 0, and the frame shall never be pushed
to REO entrance ring.
<legal all>
*/
#define RX_MPDU_INFO_10_RX_REO_QUEUE_DESC_ADDR_31_0_OFFSET 0x00000028
#define RX_MPDU_INFO_10_RX_REO_QUEUE_DESC_ADDR_31_0_LSB 0
#define RX_MPDU_INFO_10_RX_REO_QUEUE_DESC_ADDR_31_0_MASK 0xffffffff
/* Description RX_MPDU_INFO_11_RX_REO_QUEUE_DESC_ADDR_39_32
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
Address (upper 8 bits) of the REO queue descriptor.
If no Peer entry lookup happened for this frame, the
value wil be set to 0, and the frame shall never be pushed
to REO entrance ring.
<legal all>
*/
#define RX_MPDU_INFO_11_RX_REO_QUEUE_DESC_ADDR_39_32_OFFSET 0x0000002c
#define RX_MPDU_INFO_11_RX_REO_QUEUE_DESC_ADDR_39_32_LSB 0
#define RX_MPDU_INFO_11_RX_REO_QUEUE_DESC_ADDR_39_32_MASK 0x000000ff
/* Description RX_MPDU_INFO_11_RECEIVE_QUEUE_NUMBER
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
Indicates the MPDU queue ID to which this MPDU link
descriptor belongs
Used for tracking and debugging
<legal all>
*/
#define RX_MPDU_INFO_11_RECEIVE_QUEUE_NUMBER_OFFSET 0x0000002c
#define RX_MPDU_INFO_11_RECEIVE_QUEUE_NUMBER_LSB 8
#define RX_MPDU_INFO_11_RECEIVE_QUEUE_NUMBER_MASK 0x00ffff00
/* Description RX_MPDU_INFO_11_PRE_DELIM_ERR_WARNING
Indicates that a delimiter FCS error was found in
between the Previous MPDU and this MPDU.
Note that this is just a warning, and does not mean that
this MPDU is corrupted in any way. If it is, there will be
other errors indicated such as FCS or decrypt errors
In case of ndp or phy_err, this field will indicate at
least one of delimiters located after the last MPDU in the
previous PPDU has been corrupted.
*/
#define RX_MPDU_INFO_11_PRE_DELIM_ERR_WARNING_OFFSET 0x0000002c
#define RX_MPDU_INFO_11_PRE_DELIM_ERR_WARNING_LSB 24
#define RX_MPDU_INFO_11_PRE_DELIM_ERR_WARNING_MASK 0x01000000
/* Description RX_MPDU_INFO_11_FIRST_DELIM_ERR
Indicates that the first delimiter had a FCS failure.
Only valid when first_mpdu and first_msdu are set.
*/
#define RX_MPDU_INFO_11_FIRST_DELIM_ERR_OFFSET 0x0000002c
#define RX_MPDU_INFO_11_FIRST_DELIM_ERR_LSB 25
#define RX_MPDU_INFO_11_FIRST_DELIM_ERR_MASK 0x02000000
/* Description RX_MPDU_INFO_11_RESERVED_11
<legal 0>
*/
#define RX_MPDU_INFO_11_RESERVED_11_OFFSET 0x0000002c
#define RX_MPDU_INFO_11_RESERVED_11_LSB 26
#define RX_MPDU_INFO_11_RESERVED_11_MASK 0xfc000000
/* Description RX_MPDU_INFO_12_KEY_ID_OCTET
The key ID octet from the IV.
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
<legal all>
*/
#define RX_MPDU_INFO_12_KEY_ID_OCTET_OFFSET 0x00000030
#define RX_MPDU_INFO_12_KEY_ID_OCTET_LSB 0
#define RX_MPDU_INFO_12_KEY_ID_OCTET_MASK 0x000000ff
/* Description RX_MPDU_INFO_12_NEW_PEER_ENTRY
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
Set if new RX_PEER_ENTRY TLV follows. If clear,
RX_PEER_ENTRY doesn't follow so RX DECRYPTION module either
uses old peer entry or not decrypt.
<legal all>
*/
#define RX_MPDU_INFO_12_NEW_PEER_ENTRY_OFFSET 0x00000030
#define RX_MPDU_INFO_12_NEW_PEER_ENTRY_LSB 8
#define RX_MPDU_INFO_12_NEW_PEER_ENTRY_MASK 0x00000100
/* Description RX_MPDU_INFO_12_DECRYPT_NEEDED
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
Set if decryption is needed.
Note:
When RXPCU sets bit 'ast_index_not_found' and/or
ast_index_timeout', RXPCU will also ensure that this bit is
NOT set
CRYPTO for that reason only needs to evaluate this bit
and non of the other ones.
<legal all>
*/
#define RX_MPDU_INFO_12_DECRYPT_NEEDED_OFFSET 0x00000030
#define RX_MPDU_INFO_12_DECRYPT_NEEDED_LSB 9
#define RX_MPDU_INFO_12_DECRYPT_NEEDED_MASK 0x00000200
/* Description RX_MPDU_INFO_12_DECAP_TYPE
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
Used by the OLE during decapsulation.
Indicates the decapsulation that HW will perform:
<enum 0 RAW> No encapsulation
<enum 1 Native_WiFi>
<enum 2 Ethernet> Ethernet 2 (DIX) or 802.3 (uses
SNAP/LLC)
<enum 3 802_3> Indicate Ethernet
<legal all>
*/
#define RX_MPDU_INFO_12_DECAP_TYPE_OFFSET 0x00000030
#define RX_MPDU_INFO_12_DECAP_TYPE_LSB 10
#define RX_MPDU_INFO_12_DECAP_TYPE_MASK 0x00000c00
/* Description RX_MPDU_INFO_12_RX_INSERT_VLAN_C_TAG_PADDING
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
Insert 4 byte of all zeros as VLAN tag if the rx payload
does not have VLAN. Used during decapsulation.
<legal all>
*/
#define RX_MPDU_INFO_12_RX_INSERT_VLAN_C_TAG_PADDING_OFFSET 0x00000030
#define RX_MPDU_INFO_12_RX_INSERT_VLAN_C_TAG_PADDING_LSB 12
#define RX_MPDU_INFO_12_RX_INSERT_VLAN_C_TAG_PADDING_MASK 0x00001000
/* Description RX_MPDU_INFO_12_RX_INSERT_VLAN_S_TAG_PADDING
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
Insert 4 byte of all zeros as double VLAN tag if the rx
payload does not have VLAN. Used during
<legal all>
*/
#define RX_MPDU_INFO_12_RX_INSERT_VLAN_S_TAG_PADDING_OFFSET 0x00000030
#define RX_MPDU_INFO_12_RX_INSERT_VLAN_S_TAG_PADDING_LSB 13
#define RX_MPDU_INFO_12_RX_INSERT_VLAN_S_TAG_PADDING_MASK 0x00002000
/* Description RX_MPDU_INFO_12_STRIP_VLAN_C_TAG_DECAP
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
Strip the VLAN during decapsulation. Used by the OLE.
<legal all>
*/
#define RX_MPDU_INFO_12_STRIP_VLAN_C_TAG_DECAP_OFFSET 0x00000030
#define RX_MPDU_INFO_12_STRIP_VLAN_C_TAG_DECAP_LSB 14
#define RX_MPDU_INFO_12_STRIP_VLAN_C_TAG_DECAP_MASK 0x00004000
/* Description RX_MPDU_INFO_12_STRIP_VLAN_S_TAG_DECAP
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
Strip the double VLAN during decapsulation. Used by
the OLE.
<legal all>
*/
#define RX_MPDU_INFO_12_STRIP_VLAN_S_TAG_DECAP_OFFSET 0x00000030
#define RX_MPDU_INFO_12_STRIP_VLAN_S_TAG_DECAP_LSB 15
#define RX_MPDU_INFO_12_STRIP_VLAN_S_TAG_DECAP_MASK 0x00008000
/* Description RX_MPDU_INFO_12_PRE_DELIM_COUNT
The number of delimiters before this MPDU.
Note that this number is cleared at PPDU start.
If this MPDU is the first received MPDU in the PPDU and
this MPDU gets filtered-in, this field will indicate the
number of delimiters located after the last MPDU in the
previous PPDU.
If this MPDU is located after the first received MPDU in
an PPDU, this field will indicate the number of delimiters
located between the previous MPDU and this MPDU.
In case of ndp or phy_err, this field will indicate the
number of delimiters located after the last MPDU in the
previous PPDU.
<legal all>
*/
#define RX_MPDU_INFO_12_PRE_DELIM_COUNT_OFFSET 0x00000030
#define RX_MPDU_INFO_12_PRE_DELIM_COUNT_LSB 16
#define RX_MPDU_INFO_12_PRE_DELIM_COUNT_MASK 0x0fff0000
/* Description RX_MPDU_INFO_12_AMPDU_FLAG
When set, received frame was part of an A-MPDU.
<legal all>
*/
#define RX_MPDU_INFO_12_AMPDU_FLAG_OFFSET 0x00000030
#define RX_MPDU_INFO_12_AMPDU_FLAG_LSB 28
#define RX_MPDU_INFO_12_AMPDU_FLAG_MASK 0x10000000
/* Description RX_MPDU_INFO_12_BAR_FRAME
In case of ndp or phy_err or AST_based_lookup_valid ==
0, this field will be set to 0
When set, received frame is a BAR frame
<legal all>
*/
#define RX_MPDU_INFO_12_BAR_FRAME_OFFSET 0x00000030
#define RX_MPDU_INFO_12_BAR_FRAME_LSB 29
#define RX_MPDU_INFO_12_BAR_FRAME_MASK 0x20000000
/* Description RX_MPDU_INFO_12_RESERVED_12
<legal 0>.
*/
#define RX_MPDU_INFO_12_RESERVED_12_OFFSET 0x00000030
#define RX_MPDU_INFO_12_RESERVED_12_LSB 30
#define RX_MPDU_INFO_12_RESERVED_12_MASK 0xc0000000
/* Description RX_MPDU_INFO_13_MPDU_LENGTH
In case of ndp or phy_err this field will be set to 0
MPDU length before decapsulation.
<legal all>
*/
#define RX_MPDU_INFO_13_MPDU_LENGTH_OFFSET 0x00000034
#define RX_MPDU_INFO_13_MPDU_LENGTH_LSB 0
#define RX_MPDU_INFO_13_MPDU_LENGTH_MASK 0x00003fff
/* Description RX_MPDU_INFO_13_FIRST_MPDU
See definition in RX attention descriptor
In case of ndp or phy_err, this field will be set. Note
however that there will not actually be any data contents in
the MPDU.
<legal all>
*/
#define RX_MPDU_INFO_13_FIRST_MPDU_OFFSET 0x00000034
#define RX_MPDU_INFO_13_FIRST_MPDU_LSB 14
#define RX_MPDU_INFO_13_FIRST_MPDU_MASK 0x00004000
/* Description RX_MPDU_INFO_13_MCAST_BCAST
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 0
See definition in RX attention descriptor
<legal all>
*/
#define RX_MPDU_INFO_13_MCAST_BCAST_OFFSET 0x00000034
#define RX_MPDU_INFO_13_MCAST_BCAST_LSB 15
#define RX_MPDU_INFO_13_MCAST_BCAST_MASK 0x00008000
/* Description RX_MPDU_INFO_13_AST_INDEX_NOT_FOUND
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 0
See definition in RX attention descriptor
<legal all>
*/
#define RX_MPDU_INFO_13_AST_INDEX_NOT_FOUND_OFFSET 0x00000034
#define RX_MPDU_INFO_13_AST_INDEX_NOT_FOUND_LSB 16
#define RX_MPDU_INFO_13_AST_INDEX_NOT_FOUND_MASK 0x00010000
/* Description RX_MPDU_INFO_13_AST_INDEX_TIMEOUT
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 0
See definition in RX attention descriptor
<legal all>
*/
#define RX_MPDU_INFO_13_AST_INDEX_TIMEOUT_OFFSET 0x00000034
#define RX_MPDU_INFO_13_AST_INDEX_TIMEOUT_LSB 17
#define RX_MPDU_INFO_13_AST_INDEX_TIMEOUT_MASK 0x00020000
/* Description RX_MPDU_INFO_13_POWER_MGMT
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 0
See definition in RX attention descriptor
<legal all>
*/
#define RX_MPDU_INFO_13_POWER_MGMT_OFFSET 0x00000034
#define RX_MPDU_INFO_13_POWER_MGMT_LSB 18
#define RX_MPDU_INFO_13_POWER_MGMT_MASK 0x00040000
/* Description RX_MPDU_INFO_13_NON_QOS
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 1
See definition in RX attention descriptor
<legal all>
*/
#define RX_MPDU_INFO_13_NON_QOS_OFFSET 0x00000034
#define RX_MPDU_INFO_13_NON_QOS_LSB 19
#define RX_MPDU_INFO_13_NON_QOS_MASK 0x00080000
/* Description RX_MPDU_INFO_13_NULL_DATA
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 0
See definition in RX attention descriptor
<legal all>
*/
#define RX_MPDU_INFO_13_NULL_DATA_OFFSET 0x00000034
#define RX_MPDU_INFO_13_NULL_DATA_LSB 20
#define RX_MPDU_INFO_13_NULL_DATA_MASK 0x00100000
/* Description RX_MPDU_INFO_13_MGMT_TYPE
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 0
See definition in RX attention descriptor
<legal all>
*/
#define RX_MPDU_INFO_13_MGMT_TYPE_OFFSET 0x00000034
#define RX_MPDU_INFO_13_MGMT_TYPE_LSB 21
#define RX_MPDU_INFO_13_MGMT_TYPE_MASK 0x00200000
/* Description RX_MPDU_INFO_13_CTRL_TYPE
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 0
See definition in RX attention descriptor
<legal all>
*/
#define RX_MPDU_INFO_13_CTRL_TYPE_OFFSET 0x00000034
#define RX_MPDU_INFO_13_CTRL_TYPE_LSB 22
#define RX_MPDU_INFO_13_CTRL_TYPE_MASK 0x00400000
/* Description RX_MPDU_INFO_13_MORE_DATA
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 0
See definition in RX attention descriptor
<legal all>
*/
#define RX_MPDU_INFO_13_MORE_DATA_OFFSET 0x00000034
#define RX_MPDU_INFO_13_MORE_DATA_LSB 23
#define RX_MPDU_INFO_13_MORE_DATA_MASK 0x00800000
/* Description RX_MPDU_INFO_13_EOSP
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 0
See definition in RX attention descriptor
<legal all>
*/
#define RX_MPDU_INFO_13_EOSP_OFFSET 0x00000034
#define RX_MPDU_INFO_13_EOSP_LSB 24
#define RX_MPDU_INFO_13_EOSP_MASK 0x01000000
/* Description RX_MPDU_INFO_13_FRAGMENT_FLAG
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 0
See definition in RX attention descriptor
<legal all>
*/
#define RX_MPDU_INFO_13_FRAGMENT_FLAG_OFFSET 0x00000034
#define RX_MPDU_INFO_13_FRAGMENT_FLAG_LSB 25
#define RX_MPDU_INFO_13_FRAGMENT_FLAG_MASK 0x02000000
/* Description RX_MPDU_INFO_13_ORDER
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 0
See definition in RX attention descriptor
<legal all>
*/
#define RX_MPDU_INFO_13_ORDER_OFFSET 0x00000034
#define RX_MPDU_INFO_13_ORDER_LSB 26
#define RX_MPDU_INFO_13_ORDER_MASK 0x04000000
/* Description RX_MPDU_INFO_13_U_APSD_TRIGGER
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 0
See definition in RX attention descriptor
<legal all>
*/
#define RX_MPDU_INFO_13_U_APSD_TRIGGER_OFFSET 0x00000034
#define RX_MPDU_INFO_13_U_APSD_TRIGGER_LSB 27
#define RX_MPDU_INFO_13_U_APSD_TRIGGER_MASK 0x08000000
/* Description RX_MPDU_INFO_13_ENCRYPT_REQUIRED
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 0
See definition in RX attention descriptor
<legal all>
*/
#define RX_MPDU_INFO_13_ENCRYPT_REQUIRED_OFFSET 0x00000034
#define RX_MPDU_INFO_13_ENCRYPT_REQUIRED_LSB 28
#define RX_MPDU_INFO_13_ENCRYPT_REQUIRED_MASK 0x10000000
/* Description RX_MPDU_INFO_13_DIRECTED
In case of ndp or phy_err or Phy_err_during_mpdu_header
this field will be set to 0
See definition in RX attention descriptor
<legal all>
*/
#define RX_MPDU_INFO_13_DIRECTED_OFFSET 0x00000034
#define RX_MPDU_INFO_13_DIRECTED_LSB 29
#define RX_MPDU_INFO_13_DIRECTED_MASK 0x20000000
/* Description RX_MPDU_INFO_13_AMSDU_PRESENT
Field only valid when Mpdu_qos_control_valid is set
The 'amsdu_present' bit within the QoS control field of
the MPDU
<legal all>
*/
#define RX_MPDU_INFO_13_AMSDU_PRESENT_OFFSET 0x00000034
#define RX_MPDU_INFO_13_AMSDU_PRESENT_LSB 30
#define RX_MPDU_INFO_13_AMSDU_PRESENT_MASK 0x40000000
/* Description RX_MPDU_INFO_13_RESERVED_13
<legal 0>
*/
#define RX_MPDU_INFO_13_RESERVED_13_OFFSET 0x00000034
#define RX_MPDU_INFO_13_RESERVED_13_LSB 31
#define RX_MPDU_INFO_13_RESERVED_13_MASK 0x80000000
/* Description RX_MPDU_INFO_14_MPDU_FRAME_CONTROL_FIELD
Field only valid when Mpdu_frame_control_valid is set
The frame control field of this received MPDU.
Field only valid when Ndp_frame and phy_err are NOT set
Bytes 0 + 1 of the received MPDU
<legal all>
*/
#define RX_MPDU_INFO_14_MPDU_FRAME_CONTROL_FIELD_OFFSET 0x00000038
#define RX_MPDU_INFO_14_MPDU_FRAME_CONTROL_FIELD_LSB 0
#define RX_MPDU_INFO_14_MPDU_FRAME_CONTROL_FIELD_MASK 0x0000ffff
/* Description RX_MPDU_INFO_14_MPDU_DURATION_FIELD
Field only valid when Mpdu_duration_valid is set
The duration field of this received MPDU.
<legal all>
*/
#define RX_MPDU_INFO_14_MPDU_DURATION_FIELD_OFFSET 0x00000038
#define RX_MPDU_INFO_14_MPDU_DURATION_FIELD_LSB 16
#define RX_MPDU_INFO_14_MPDU_DURATION_FIELD_MASK 0xffff0000
/* Description RX_MPDU_INFO_15_MAC_ADDR_AD1_31_0
Field only valid when mac_addr_ad1_valid is set
The Least Significant 4 bytes of the Received Frames MAC
Address AD1
<legal all>
*/
#define RX_MPDU_INFO_15_MAC_ADDR_AD1_31_0_OFFSET 0x0000003c
#define RX_MPDU_INFO_15_MAC_ADDR_AD1_31_0_LSB 0
#define RX_MPDU_INFO_15_MAC_ADDR_AD1_31_0_MASK 0xffffffff
/* Description RX_MPDU_INFO_16_MAC_ADDR_AD1_47_32
Field only valid when mac_addr_ad1_valid is set
The 2 most significant bytes of the Received Frames MAC
Address AD1
<legal all>
*/
#define RX_MPDU_INFO_16_MAC_ADDR_AD1_47_32_OFFSET 0x00000040
#define RX_MPDU_INFO_16_MAC_ADDR_AD1_47_32_LSB 0
#define RX_MPDU_INFO_16_MAC_ADDR_AD1_47_32_MASK 0x0000ffff
/* Description RX_MPDU_INFO_16_MAC_ADDR_AD2_15_0
Field only valid when mac_addr_ad2_valid is set
The Least Significant 2 bytes of the Received Frames MAC
Address AD2
<legal all>
*/
#define RX_MPDU_INFO_16_MAC_ADDR_AD2_15_0_OFFSET 0x00000040
#define RX_MPDU_INFO_16_MAC_ADDR_AD2_15_0_LSB 16
#define RX_MPDU_INFO_16_MAC_ADDR_AD2_15_0_MASK 0xffff0000
/* Description RX_MPDU_INFO_17_MAC_ADDR_AD2_47_16
Field only valid when mac_addr_ad2_valid is set
The 4 most significant bytes of the Received Frames MAC
Address AD2
<legal all>
*/
#define RX_MPDU_INFO_17_MAC_ADDR_AD2_47_16_OFFSET 0x00000044
#define RX_MPDU_INFO_17_MAC_ADDR_AD2_47_16_LSB 0
#define RX_MPDU_INFO_17_MAC_ADDR_AD2_47_16_MASK 0xffffffff
/* Description RX_MPDU_INFO_18_MAC_ADDR_AD3_31_0
Field only valid when mac_addr_ad3_valid is set
The Least Significant 4 bytes of the Received Frames MAC
Address AD3
<legal all>
*/
#define RX_MPDU_INFO_18_MAC_ADDR_AD3_31_0_OFFSET 0x00000048
#define RX_MPDU_INFO_18_MAC_ADDR_AD3_31_0_LSB 0
#define RX_MPDU_INFO_18_MAC_ADDR_AD3_31_0_MASK 0xffffffff
/* Description RX_MPDU_INFO_19_MAC_ADDR_AD3_47_32
Field only valid when mac_addr_ad3_valid is set
The 2 most significant bytes of the Received Frames MAC
Address AD3
<legal all>
*/
#define RX_MPDU_INFO_19_MAC_ADDR_AD3_47_32_OFFSET 0x0000004c
#define RX_MPDU_INFO_19_MAC_ADDR_AD3_47_32_LSB 0
#define RX_MPDU_INFO_19_MAC_ADDR_AD3_47_32_MASK 0x0000ffff
/* Description RX_MPDU_INFO_19_MPDU_SEQUENCE_CONTROL_FIELD
The sequence control field of the MPDU
<legal all>
*/
#define RX_MPDU_INFO_19_MPDU_SEQUENCE_CONTROL_FIELD_OFFSET 0x0000004c
#define RX_MPDU_INFO_19_MPDU_SEQUENCE_CONTROL_FIELD_LSB 16
#define RX_MPDU_INFO_19_MPDU_SEQUENCE_CONTROL_FIELD_MASK 0xffff0000
/* Description RX_MPDU_INFO_20_MAC_ADDR_AD4_31_0
Field only valid when mac_addr_ad4_valid is set
The Least Significant 4 bytes of the Received Frames MAC
Address AD4
<legal all>
*/
#define RX_MPDU_INFO_20_MAC_ADDR_AD4_31_0_OFFSET 0x00000050
#define RX_MPDU_INFO_20_MAC_ADDR_AD4_31_0_LSB 0
#define RX_MPDU_INFO_20_MAC_ADDR_AD4_31_0_MASK 0xffffffff
/* Description RX_MPDU_INFO_21_MAC_ADDR_AD4_47_32
Field only valid when mac_addr_ad4_valid is set
The 2 most significant bytes of the Received Frames MAC
Address AD4
<legal all>
*/
#define RX_MPDU_INFO_21_MAC_ADDR_AD4_47_32_OFFSET 0x00000054
#define RX_MPDU_INFO_21_MAC_ADDR_AD4_47_32_LSB 0
#define RX_MPDU_INFO_21_MAC_ADDR_AD4_47_32_MASK 0x0000ffff
/* Description RX_MPDU_INFO_21_MPDU_QOS_CONTROL_FIELD
Field only valid when mpdu_qos_control_valid is set
The sequence control field of the MPDU
<legal all>
*/
#define RX_MPDU_INFO_21_MPDU_QOS_CONTROL_FIELD_OFFSET 0x00000054
#define RX_MPDU_INFO_21_MPDU_QOS_CONTROL_FIELD_LSB 16
#define RX_MPDU_INFO_21_MPDU_QOS_CONTROL_FIELD_MASK 0xffff0000
/* Description RX_MPDU_INFO_22_MPDU_HT_CONTROL_FIELD
Field only valid when mpdu_qos_control_valid is set
The HT control field of the MPDU
<legal all>
*/
#define RX_MPDU_INFO_22_MPDU_HT_CONTROL_FIELD_OFFSET 0x00000058
#define RX_MPDU_INFO_22_MPDU_HT_CONTROL_FIELD_LSB 0
#define RX_MPDU_INFO_22_MPDU_HT_CONTROL_FIELD_MASK 0xffffffff
#endif // _RX_MPDU_INFO_H_