// SPDX-License-Identifier: (GPL-2.0+ OR MIT) #include #include #include #include #include #include "rk3566.dtsi" / { aliases { mmc0 = &sdhci; }; chosen { stdout-path = "serial2:1500000n8"; }; adc-keys { compatible = "adc-keys"; io-channels = <&saradc 0>; io-channel-names = "buttons"; keyup-threshold-microvolt = <1750000>; button-recovery { label = "recovery"; linux,code = ; press-threshold-microvolt = <0>; }; }; spk_amp: audio-amplifier { compatible = "simple-audio-amplifier"; enable-gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&spk_amp_enable_h>; pinctrl-names = "default"; sound-name-prefix = "Speaker Amp"; }; dmic_codec: dmic-codec { compatible = "dmic-codec"; num-channels = <6>; #sound-dai-cells = <0>; }; gpio-keys { compatible = "gpio-keys"; pinctrl-0 = <&hall_int_l>; pinctrl-names = "default"; switch-cover { label = "cover"; gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>; linux,input-type = ; linux,code = ; linux,can-disable; wakeup-event-action = ; wakeup-source; }; }; gpio-leds { compatible = "gpio-leds"; pinctrl-0 = <&led_pin>; pinctrl-names = "default"; led-0 { color = ; function = LED_FUNCTION_CHARGING; gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>; }; }; sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rk817 1>; clock-names = "ext_clock"; pinctrl-0 = <&wifi_enable_h>; pinctrl-names = "default"; reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>; }; sound { compatible = "simple-audio-card"; simple-audio-card,name = "PineNote"; simple-audio-card,aux-devs = <&spk_amp>; simple-audio-card,widgets = "Headphone", "Headphones", "Speaker", "Internal Speakers"; simple-audio-card,routing = "Headphones", "HPOL", "Headphones", "HPOR", "Internal Speakers", "Speaker Amp OUTL", "Internal Speakers", "Speaker Amp OUTR", "Speaker Amp INL", "HPOL", "Speaker Amp INR", "HPOR"; simple-audio-card,pin-switches = "Internal Speakers"; #address-cells = <1>; #size-cells = <0>; simple-audio-card,dai-link@0 { reg = <0>; bitclock-master = <&link0_cpu>; format = "i2s"; frame-master = <&link0_cpu>; mclk-fs = <256>; link0_cpu: cpu { sound-dai = <&i2s1_8ch>; }; link0_codec: codec { sound-dai = <&rk817>; }; }; simple-audio-card,dai-link@1 { reg = <1>; bitclock-master = <&link1_cpu>; format = "pdm"; frame-master = <&link1_cpu>; link1_cpu: cpu { sound-dai = <&pdm>; }; link1_codec: codec { sound-dai = <&dmic_codec>; }; }; }; vbat_4g: vbat-4g { compatible = "regulator-fixed"; regulator-name = "vbat_4g"; regulator-min-microvolt = <3800000>; regulator-max-microvolt = <3800000>; /* powered by vcc_bat, enabled by vbat_4g_en */ vin-supply = <&vbat_4g_en>; }; vcc_1v8: vcc-1v8 { compatible = "regulator-fixed"; regulator-name = "vcc_1v8"; regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; /* powered by vcc_sys, enabled by vcc_1v8_en */ vin-supply = <&vcc_1v8_en>; }; vcc_bat: vcc-bat { compatible = "regulator-fixed"; regulator-name = "vcc_bat"; regulator-always-on; regulator-min-microvolt = <3800000>; regulator-max-microvolt = <3800000>; }; vcc_hall_3v3: vcc-hall-3v3 { compatible = "regulator-fixed"; regulator-name = "vcc_hall_3v3"; regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&vcc_sys>; }; vcc_sys: vcc-sys { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; regulator-always-on; regulator-min-microvolt = <3800000>; regulator-max-microvolt = <3800000>; vin-supply = <&vcc_bat>; }; vcc_wl: vcc-wl { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&vcc_wl_pin>; pinctrl-names = "default"; regulator-name = "vcc_wl"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&vcc_bat>; }; vdda_0v9: vdda-0v9 { compatible = "regulator-fixed"; regulator-name = "vdda_0v9"; regulator-always-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; /* powered by vcc_sys, enabled by vcc_1v8_en */ vin-supply = <&vcc_1v8_en>; }; }; &cpu0 { cpu-supply = <&vdd_cpu>; }; &cpu1 { cpu-supply = <&vdd_cpu>; }; &cpu2 { cpu-supply = <&vdd_cpu>; }; &cpu3 { cpu-supply = <&vdd_cpu>; }; &i2c0 { status = "okay"; vdd_cpu: regulator@1c { compatible = "tcs,tcs4525"; reg = <0x1c>; fcs,suspend-voltage-selector = <0>; regulator-name = "vdd_cpu"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1390000>; regulator-ramp-delay = <2300>; regulator-always-on; vin-supply = <&vcc_sys>; regulator-state-mem { regulator-on-in-suspend; }; }; rk817: pmic@20 { compatible = "rockchip,rk817"; reg = <0x20>; interrupt-parent = <&gpio0>; interrupts = ; assigned-clocks = <&cru I2S1_MCLKOUT_TX>; assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; clocks = <&cru I2S1_MCLKOUT_TX>; clock-names = "mclk"; #clock-cells = <1>; pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>, <&pmic_sleep>; pinctrl-names = "default"; rockchip,system-power-controller; #sound-dai-cells = <0>; wakeup-source; vcc1-supply = <&vcc_sys>; vcc2-supply = <&vcc_sys>; vcc3-supply = <&vcc_sys>; vcc4-supply = <&vcc_sys>; vcc5-supply = <&vcc_sys>; vcc6-supply = <&vcc_sys>; vcc7-supply = <&vcc_sys>; vcc8-supply = <&vcc_sys>; vcc9-supply = <&dcdc_boost>; regulators { vdd_logic: DCDC_REG1 { regulator-name = "vdd_logic"; regulator-always-on; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; regulator-ramp-delay = <6001>; regulator-initial-mode = <0x2>; regulator-state-mem { regulator-off-in-suspend; regulator-suspend-microvolt = <900000>; }; }; vdd_gpu_npu: DCDC_REG2 { regulator-name = "vdd_gpu_npu"; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; regulator-ramp-delay = <6001>; regulator-initial-mode = <0x2>; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_ddr: DCDC_REG3 { regulator-name = "vcc_ddr"; regulator-always-on; regulator-initial-mode = <0x2>; regulator-state-mem { regulator-on-in-suspend; }; }; vcc_3v3: DCDC_REG4 { regulator-name = "vcc_3v3"; regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-initial-mode = <0x2>; regulator-state-mem { regulator-off-in-suspend; }; }; vcca_1v8_pmu: LDO_REG1 { regulator-name = "vcca_1v8_pmu"; regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-on-in-suspend; }; }; /* unused */ vdda_0v9_ldo: LDO_REG2 { regulator-name = "vdda_0v9_ldo"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; regulator-state-mem { regulator-off-in-suspend; }; }; vdda_0v9_pmu: LDO_REG3 { regulator-name = "vdda_0v9_pmu"; regulator-always-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; regulator-state-mem { regulator-on-in-suspend; }; }; vccio_acodec: LDO_REG4 { regulator-name = "vccio_acodec"; regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-off-in-suspend; }; }; /* unused */ vccio_sd: LDO_REG5 { regulator-name = "vccio_sd"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_3v3_pmu: LDO_REG6 { regulator-name = "vcc_3v3_pmu"; regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-on-in-suspend; }; }; vcc_1v8_en: LDO_REG7 { regulator-name = "vcc_1v8_en"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-off-in-suspend; }; }; vbat_4g_en: LDO_REG8 { regulator-name = "vbat_4g_en"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-off-in-suspend; }; }; sleep_sta_ctl: LDO_REG9 { regulator-name = "sleep_sta_ctl"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-on-in-suspend; }; }; dcdc_boost: BOOST { regulator-name = "boost"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-state-mem { regulator-off-in-suspend; }; }; otg_switch: OTG_SWITCH { regulator-name = "otg_switch"; regulator-state-mem { regulator-off-in-suspend; }; }; }; }; }; &i2c1 { status = "okay"; digitizer@9 { compatible = "wacom,w9013", "hid-over-i2c"; reg = <0x09>; interrupt-parent = <&gpio0>; interrupts = ; hid-descr-addr = <0x1>; pinctrl-0 = <&pen_fwe>, <&pen_irq_l>, <&pen_rst_l>; pinctrl-names = "default"; vdd-supply = <&vcc_3v3_pmu>; }; }; &i2c3 { pinctrl-0 = <&i2c3m1_xfer>; status = "okay"; led-controller@36 { compatible = "ti,lm3630a"; reg = <0x36>; enable-gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&backlight_hwen_h>; pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; led@0 { reg = <0>; label = "backlight_cool"; default-brightness = <0>; }; led@1 { reg = <1>; label = "backlight_warm"; default-brightness = <0>; }; }; wusb3801: tcpc@60 { compatible = "willsemi,wusb3801"; reg = <0x60>; interrupt-parent = <&gpio0>; interrupts = ; pinctrl-0 = <&tcpc_int_l>; pinctrl-names = "default"; connector { compatible = "usb-c-connector"; label = "USB-C"; vbus-supply = <&otg_switch>; power-role = "dual"; try-power-role = "sink"; data-role = "dual"; typec-power-opmode = "default"; pd-disable; ports { #address-cells = <0x1>; #size-cells = <0x0>; port@0 { reg = <0x0>; typec_hs_usb2phy0: endpoint { remote-endpoint = <&usb2phy0_typec_hs>; }; }; }; }; }; }; &i2c5 { status = "okay"; accelerometer@18 { compatible = "silan,sc7a20"; reg = <0x18>; interrupt-parent = <&gpio3>; interrupts = ; pinctrl-0 = <&accelerometer_int_l>; pinctrl-names = "default"; st,drdy-int-pin = <1>; vdd-supply = <&vcc_3v3>; vddio-supply = <&vcc_3v3>; }; }; &i2s1_8ch { pinctrl-0 = <&i2s1m0_lrcktx>, <&i2s1m0_sclktx>, <&i2s1m0_sdi0>, <&i2s1m0_sdo0>; rockchip,trcm-sync-tx-only; status = "okay"; }; &pdm { pinctrl-0 = <&pdmm0_clk1>, <&pdmm0_sdi1>, <&pdmm0_sdi2>; /* microphones are on channels 1 and 2 */ rockchip,path-map = <1>, <2>, <0>, <3>; status = "okay"; }; &pinctrl { accelerometer { accelerometer_int_l: accelerometer-int-l { rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; audio-amplifier { spk_amp_enable_h: spk-amp-enable-h { rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; backlight { backlight_hwen_h: backlight-hwen-h { rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; }; }; bt { bt_enable_h: bt-enable-h { rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; }; bt_host_wake_l: bt-host-wake-l { rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>; }; bt_wake_h: bt-wake-h { rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; led { led_pin: led-pin { rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; hall { hall_int_l: hall-int-l { rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pen { pen_fwe: pen-fwe { rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>; }; pen_irq_l: pen-irq-l { rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; pen_rst_l: pen-rst-l { rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { pmic_int_l: pmic-int-l { rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; pmic_sleep: pmic-sleep { rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>; }; }; sdio-pwrseq { wifi_enable_h: wifi-enable-h { rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; tcpc { tcpc_int_l: tcpc-int-l { rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; vcc-wl { vcc_wl_pin: vcc-wl-pin { rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; wifi { wifi_host_wake_l: wifi-host-wake-l { rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; &pmu_io_domains { pmuio1-supply = <&vcc_3v3_pmu>; pmuio2-supply = <&vcc_3v3_pmu>; vccio1-supply = <&vccio_acodec>; vccio2-supply = <&vcc_1v8>; vccio3-supply = <&vcc_3v3>; vccio4-supply = <&vcca_1v8_pmu>; vccio5-supply = <&vcc_3v3>; vccio6-supply = <&vcc_3v3>; status = "okay"; }; &saradc { vref-supply = <&vcc_1v8>; status = "okay"; }; &sdhci { bus-width = <8>; mmc-hs200-1_8v; non-removable; pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>, <&emmc_datastrobe>, <&emmc_rstnout>; pinctrl-names = "default"; vmmc-supply = <&vcc_3v3>; vqmmc-supply = <&vcc_1v8>; status = "okay"; }; &sdmmc1 { bus-width = <4>; cap-sd-highspeed; cap-sdio-irq; keep-power-in-suspend; mmc-pwrseq = <&sdio_pwrseq>; non-removable; pinctrl-0 = <&sdmmc1_bus4>, <&sdmmc1_clk>, <&sdmmc1_cmd>; pinctrl-names = "default"; sd-uhs-sdr104; vmmc-supply = <&vcc_wl>; vqmmc-supply = <&vcca_1v8_pmu>; status = "okay"; }; &tsadc { /* tshut mode 0:CRU 1:GPIO */ rockchip,hw-tshut-mode = <1>; /* tshut polarity 0:LOW 1:HIGH */ rockchip,hw-tshut-polarity = <0>; status = "okay"; }; &uart1 { dma-names = "tx", "rx"; pinctrl-0 = <&uart1m0_ctsn>, <&uart1m0_rtsn>, <&uart1m0_xfer>; pinctrl-names = "default"; uart-has-rtscts; status = "okay"; bluetooth { compatible = "brcm,bcm43438-bt"; clocks = <&rk817 1>; clock-names = "lpo"; device-wakeup-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; host-wakeup-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&bt_enable_h>, <&bt_host_wake_l>, <&bt_wake_h>; pinctrl-names = "default"; shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; vbat-supply = <&vcc_wl>; vddio-supply = <&vcca_1v8_pmu>; }; }; &uart2 { status = "okay"; }; &usb_host0_xhci { dr_mode = "otg"; status = "okay"; }; &usb2phy0 { status = "okay"; }; &usb2phy0_otg { status = "okay"; port { usb2phy0_typec_hs: endpoint { remote-endpoint = <&typec_hs_usb2phy0>; }; }; };