// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2018 Amlogic, Inc. All rights reserved. */ /dts-v1/; #include "meson-g12a.dtsi" #include #include #include #include / { compatible = "amlogic,u200", "amlogic,g12a"; model = "Amlogic Meson G12A U200 Development Board"; aliases { serial0 = &uart_AO; ethernet0 = ðmac; }; dioo2133: audio-amplifier-0 { compatible = "simple-audio-amplifier"; enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; VCC-supply = <&vcc_5v>; sound-name-prefix = "10U2"; }; spdif_dir: audio-codec-0 { compatible = "linux,spdif-dir"; #sound-dai-cells = <0>; sound-name-prefix = "DIR"; }; spdif_dit: audio-codec-1 { compatible = "linux,spdif-dit"; #sound-dai-cells = <0>; sound-name-prefix = "DIT"; }; chosen { stdout-path = "serial0:115200n8"; }; cvbs-connector { compatible = "composite-video-connector"; port { cvbs_connector_in: endpoint { remote-endpoint = <&cvbs_vdac_out>; }; }; }; emmc_pwrseq: emmc-pwrseq { compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; }; hdmi-connector { compatible = "hdmi-connector"; type = "a"; port { hdmi_connector_in: endpoint { remote-endpoint = <&hdmi_tx_tmds_out>; }; }; }; memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x40000000>; }; flash_1v8: regulator-flash-1v8 { compatible = "regulator-fixed"; regulator-name = "FLASH_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; vin-supply = <&vcc_3v3>; regulator-always-on; }; main_12v: regulator-main-12v { compatible = "regulator-fixed"; regulator-name = "12V"; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; regulator-always-on; }; usb_pwr_en: regulator-usb-pwr-en { compatible = "regulator-fixed"; regulator-name = "USB_PWR_EN"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&vcc_5v>; gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; enable-active-high; }; vcc_1v8: regulator-vcc-1v8 { compatible = "regulator-fixed"; regulator-name = "VCC_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; vin-supply = <&vcc_3v3>; regulator-always-on; }; vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&vddao_3v3>; regulator-always-on; /* FIXME: actually controlled by VDDCPU_B_EN */ }; vcc_5v: regulator-vcc-5v { compatible = "regulator-fixed"; regulator-name = "VCC_5V"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&main_12v>; gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; enable-active-high; }; vddao_1v8: regulator-vddao-1v8 { compatible = "regulator-fixed"; regulator-name = "VDDAO_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; vin-supply = <&vddao_3v3>; regulator-always-on; }; vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&main_12v>; regulator-always-on; }; vddcpu: regulator-vddcpu { /* * MP8756GD Regulator. */ compatible = "pwm-regulator"; regulator-name = "VDDCPU"; regulator-min-microvolt = <721000>; regulator-max-microvolt = <1022000>; pwm-supply = <&main_12v>; pwms = <&pwm_AO_cd 1 1250 0>; pwm-dutycycle-range = <100 0>; regulator-boot-on; regulator-always-on; }; sound { compatible = "amlogic,axg-sound-card"; model = "U200"; audio-widgets = "Line", "Lineout"; audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmout_c>, <&tdmin_a>, <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>, <&dioo2133>; audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", "TDMOUT_A IN 1", "FRDDR_B OUT 0", "TDMOUT_A IN 2", "FRDDR_C OUT 0", "TDM_A Playback", "TDMOUT_A OUT", "TDMOUT_B IN 0", "FRDDR_A OUT 1", "TDMOUT_B IN 1", "FRDDR_B OUT 1", "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT", "TDMOUT_C IN 0", "FRDDR_A OUT 2", "TDMOUT_C IN 1", "FRDDR_B OUT 2", "TDMOUT_C IN 2", "FRDDR_C OUT 2", "TDM_C Playback", "TDMOUT_C OUT", "SPDIFOUT_A IN 0", "FRDDR_A OUT 3", "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", "SPDIFOUT_A IN 2", "FRDDR_C OUT 3", "SPDIFOUT_B IN 0", "FRDDR_A OUT 4", "SPDIFOUT_B IN 1", "FRDDR_B OUT 4", "SPDIFOUT_B IN 2", "FRDDR_C OUT 4", "TDMIN_A IN 0", "TDM_A Capture", "TDMIN_A IN 1", "TDM_B Capture", "TDMIN_A IN 2", "TDM_C Capture", "TDMIN_A IN 3", "TDM_A Loopback", "TDMIN_A IN 4", "TDM_B Loopback", "TDMIN_A IN 5", "TDM_C Loopback", "TDMIN_B IN 0", "TDM_A Capture", "TDMIN_B IN 1", "TDM_B Capture", "TDMIN_B IN 2", "TDM_C Capture", "TDMIN_B IN 3", "TDM_A Loopback", "TDMIN_B IN 4", "TDM_B Loopback", "TDMIN_B IN 5", "TDM_C Loopback", "TDMIN_C IN 0", "TDM_A Capture", "TDMIN_C IN 1", "TDM_B Capture", "TDMIN_C IN 2", "TDM_C Capture", "TDMIN_C IN 3", "TDM_A Loopback", "TDMIN_C IN 4", "TDM_B Loopback", "TDMIN_C IN 5", "TDM_C Loopback", "TDMIN_LB IN 3", "TDM_A Capture", "TDMIN_LB IN 4", "TDM_B Capture", "TDMIN_LB IN 5", "TDM_C Capture", "TDMIN_LB IN 0", "TDM_A Loopback", "TDMIN_LB IN 1", "TDM_B Loopback", "TDMIN_LB IN 2", "TDM_C Loopback", "TODDR_A IN 0", "TDMIN_A OUT", "TODDR_B IN 0", "TDMIN_A OUT", "TODDR_C IN 0", "TDMIN_A OUT", "TODDR_A IN 1", "TDMIN_B OUT", "TODDR_B IN 1", "TDMIN_B OUT", "TODDR_C IN 1", "TDMIN_B OUT", "TODDR_A IN 2", "TDMIN_C OUT", "TODDR_B IN 2", "TDMIN_C OUT", "TODDR_C IN 2", "TDMIN_C OUT", "TODDR_A IN 3", "SPDIFIN Capture", "TODDR_B IN 3", "SPDIFIN Capture", "TODDR_C IN 3", "SPDIFIN Capture", "TODDR_A IN 6", "TDMIN_LB OUT", "TODDR_B IN 6", "TDMIN_LB OUT", "TODDR_C IN 6", "TDMIN_LB OUT", "10U2 INL", "ACODEC LOLP", "10U2 INR", "ACODEC LORP", "Lineout", "10U2 OUTL", "Lineout", "10U2 OUTR"; clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; assigned-clock-parents = <0>, <0>, <0>; assigned-clock-rates = <294912000>, <270950400>, <393216000>; dai-link-0 { sound-dai = <&frddr_a>; }; dai-link-1 { sound-dai = <&frddr_b>; }; dai-link-2 { sound-dai = <&frddr_c>; }; dai-link-3 { sound-dai = <&toddr_a>; }; dai-link-4 { sound-dai = <&toddr_b>; }; dai-link-5 { sound-dai = <&toddr_c>; }; /* Connected to the WIFI/BT chip */ dai-link-6 { sound-dai = <&tdmif_a>; dai-format = "dsp_a"; dai-tdm-slot-tx-mask-0 = <1 1>; mclk-fs = <256>; codec-0 { sound-dai = <&toacodec TOACODEC_IN_A>; }; codec-1 { sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; }; }; /* Connected to the onboard AD82584F DAC */ dai-link-7 { sound-dai = <&tdmif_b>; dai-format = "i2s"; dai-tdm-slot-tx-mask-0 = <1 1>; mclk-fs = <256>; codec-0 { sound-dai = <&toacodec TOACODEC_IN_B>; }; codec-1 { sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; }; }; /* 8ch HDMI interface */ dai-link-8 { sound-dai = <&tdmif_c>; dai-format = "i2s"; dai-tdm-slot-tx-mask-0 = <1 1>; dai-tdm-slot-tx-mask-1 = <1 1>; dai-tdm-slot-tx-mask-2 = <1 1>; dai-tdm-slot-tx-mask-3 = <1 1>; mclk-fs = <256>; codec-0 { sound-dai = <&toacodec TOACODEC_IN_C>; }; codec-1 { sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>; }; }; /* spdif hdmi and coax output */ dai-link-9 { sound-dai = <&spdifout_a>; codec-0 { sound-dai = <&spdif_dit>; }; codec-1 { sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>; }; }; /* spdif hdmi interface */ dai-link-10 { sound-dai = <&spdifout_b>; codec { sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>; }; }; /* hdmi glue */ dai-link-11 { sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; codec { sound-dai = <&hdmi_tx>; }; }; /* internal codec glue */ dai-link-12 { sound-dai = <&toacodec TOACODEC_OUT>; codec { sound-dai = <&acodec>; }; }; /* spdif coax input */ dai-link-13 { sound-dai = <&spdifin>; codec { sound-dai = <&spdif_dir>; }; }; }; }; &acodec { AVDD-supply = <&vddao_1v8>; status = "okay"; }; &arb { status = "okay"; }; &cec_AO { pinctrl-0 = <&cec_ao_a_h_pins>; pinctrl-names = "default"; status = "disabled"; hdmi-phandle = <&hdmi_tx>; }; &cecb_AO { pinctrl-0 = <&cec_ao_b_h_pins>; pinctrl-names = "default"; status = "okay"; hdmi-phandle = <&hdmi_tx>; }; &clkc_audio { status = "okay"; }; &cpu0 { cpu-supply = <&vddcpu>; operating-points-v2 = <&cpu_opp_table>; clocks = <&clkc CLKID_CPU_CLK>; clock-latency = <50000>; }; &cpu1 { cpu-supply = <&vddcpu>; operating-points-v2 = <&cpu_opp_table>; clocks = <&clkc CLKID_CPU_CLK>; clock-latency = <50000>; }; &cpu2 { cpu-supply = <&vddcpu>; operating-points-v2 = <&cpu_opp_table>; clocks = <&clkc CLKID_CPU_CLK>; clock-latency = <50000>; }; &cpu3 { cpu-supply = <&vddcpu>; operating-points-v2 = <&cpu_opp_table>; clocks = <&clkc CLKID_CPU_CLK>; clock-latency = <50000>; }; &clkc_audio { status = "okay"; }; &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; }; }; ðmac { status = "okay"; phy-handle = <&internal_ephy>; phy-mode = "rmii"; }; &frddr_a { status = "okay"; }; &frddr_b { status = "okay"; }; &frddr_c { status = "okay"; }; &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; pinctrl-names = "default"; hdmi-supply = <&vcc_5v>; }; &hdmi_tx_tmds_port { hdmi_tx_tmds_out: endpoint { remote-endpoint = <&hdmi_connector_in>; }; }; &ir { status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; pinctrl-names = "default"; }; /* i2c Touch */ &i2c0 { status = "okay"; pinctrl-0 = <&i2c0_sda_z0_pins>, <&i2c0_sck_z1_pins>; pinctrl-names = "default"; }; /* i2c CM */ &i2c2 { status = "okay"; pinctrl-0 = <&i2c2_sda_z_pins>, <&i2c2_sck_z_pins>; pinctrl-names = "default"; }; /* i2c Audio */ &i2c3 { status = "okay"; pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; pinctrl-names = "default"; }; &pwm_AO_cd { pinctrl-0 = <&pwm_ao_d_e_pins>; pinctrl-names = "default"; clocks = <&xtal>; clock-names = "clkin1"; status = "okay"; }; /* SD card */ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_c_pins>; pinctrl-1 = <&sdcard_clk_gate_c_pins>; pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddao_3v3>; }; /* eMMC */ &sd_emmc_c { status = "okay"; pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; pinctrl-1 = <&emmc_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; bus-width = <8>; cap-mmc-highspeed; mmc-ddr-1_8v; mmc-hs200-1_8v; max-frequency = <200000000>; non-removable; disable-wp; mmc-pwrseq = <&emmc_pwrseq>; vmmc-supply = <&vcc_3v3>; vqmmc-supply = <&flash_1v8>; }; &spdifin { pinctrl-0 = <&spdif_in_h_pins>; pinctrl-names = "default"; status = "okay"; }; &spdifout_a { pinctrl-0 = <&spdif_ao_out_pins>; pinctrl-names = "default"; status = "okay"; }; &spdifout_b { status = "okay"; }; &tdmif_a { pinctrl-0 = <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>, <&tdm_a_dout0_pins> ; pinctrl-names = "default"; status = "okay"; }; &tdmif_b { pinctrl-0 = <&mclk0_a_pins>, <&tdm_b_fs_pins>, <&tdm_b_sclk_pins>, <&tdm_b_dout0_pins>; pinctrl-names = "default"; status = "okay"; assigned-clocks = <&clkc_audio AUD_CLKID_TDM_MCLK_PAD0>, <&clkc_audio AUD_CLKID_TDM_SCLK_PAD1>, <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD1>; assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_B_MCLK>, <&clkc_audio AUD_CLKID_MST_B_SCLK>, <&clkc_audio AUD_CLKID_MST_B_LRCLK>; assigned-clock-rates = <0>, <0>, <0>; }; &tdmif_c { status = "okay"; }; &tdmin_a { status = "okay"; }; &tdmin_b { status = "okay"; }; &tdmin_c { status = "okay"; }; &tdmin_lb { status = "okay"; }; &tdmout_a { status = "okay"; }; &tdmout_b { status = "okay"; }; &tdmout_c { status = "okay"; }; &toacodec { status = "okay"; }; &toddr_a { status = "okay"; }; &toddr_b { status = "okay"; }; &toddr_c { status = "okay"; }; &tohdmitx { status = "okay"; }; &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; }; &usb { status = "okay"; vbus-supply = <&usb_pwr_en>; }; &usb2_phy0 { phy-supply = <&vcc_5v>; }; &usb2_phy1 { phy-supply = <&vcc_5v>; };