// SPDX-License-Identifier: GPL-2.0+ /dts-v1/; #include "aspeed-g5.dtsi" #include #include #include #include /{ model = "ASRock SPC621D8HM3 BMC"; compatible = "asrock,spc621d8hm3-bmc", "aspeed,ast2500"; aliases { serial4 = &uart5; i2c20 = &i2c1mux0ch0; i2c21 = &i2c1mux0ch1; }; chosen { stdout-path = &uart5; }; memory@80000000 { reg = <0x80000000 0x20000000>; }; leds { compatible = "gpio-leds"; /* BMC heartbeat */ led-0 { gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>; function = LED_FUNCTION_HEARTBEAT; color = ; linux,default-trigger = "timer"; }; /* system fault */ led-1 { gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>; function = LED_FUNCTION_FAULT; color = ; panic-indicator; }; }; iio-hwmon { compatible = "iio-hwmon"; io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>; }; }; &fmc { status = "okay"; flash@0 { status = "okay"; m25p,fast-read; label = "bmc"; spi-max-frequency = <50000000>; /* 50 MHz */ #include "openbmc-flash-layout-64.dtsi" }; }; &uart5 { status = "okay"; }; &vuart { status = "okay"; aspeed,lpc-io-reg = <0x2f8>; aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; }; &mac0 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; nvmem-cells = <ð0_macaddress>; nvmem-cell-names = "mac-address"; }; &i2c0 { status = "okay"; }; &i2c1 { status = "okay"; /* hardware monitor/thermal sensor */ temperature-sensor@29 { compatible = "nuvoton,nct7802"; reg = <0x29>; }; /* motherboard temp sensor (TMP1, near BMC) */ temperature-sensor@4c { compatible = "nuvoton,w83773g"; reg = <0x4c>; }; /* motherboard FRU eeprom */ eeprom@50 { compatible = "st,24c128", "atmel,24c128"; reg = <0x50>; pagesize = <16>; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eth0_macaddress: macaddress@3f80 { reg = <0x3f80 6>; }; }; }; /* M.2 slot smbus mux */ i2c-mux@71 { compatible = "nxp,pca9545"; reg = <0x71>; #address-cells = <1>; #size-cells = <0>; i2c1mux0ch0: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; }; i2c1mux0ch1: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; }; }; }; &i2c2 { status = "okay"; }; &i2c3 { status = "okay"; }; &i2c4 { status = "okay"; }; &i2c5 { status = "okay"; }; &i2c6 { status = "okay"; }; &i2c7 { status = "okay"; }; &i2c8 { status = "okay"; }; &i2c9 { status = "okay"; }; &i2c10 { status = "okay"; }; &i2c11 { status = "okay"; }; &i2c12 { status = "okay"; }; &i2c13 { status = "okay"; }; &video { status = "okay"; }; &vhub { status = "okay"; }; &lpc_ctrl { status = "okay"; }; &lpc_snoop { status = "okay"; snoop-ports = <0x80>; }; &kcs3 { status = "okay"; aspeed,lpc-io-reg = <0xca2>; }; &peci0 { status = "okay"; }; &pwm_tacho { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm2_default &pinctrl_pwm3_default &pinctrl_pwm4_default>; fan@0 { reg = <0x00>; aspeed,fan-tach-ch = /bits/ 8 <0x00>; }; fan@2 { reg = <0x02>; aspeed,fan-tach-ch = /bits/ 8 <0x02>; }; fan@3 { reg = <0x03>; aspeed,fan-tach-ch = /bits/ 8 <0x03>; }; fan@4 { reg = <0x04>; aspeed,fan-tach-ch = /bits/ 8 <0x04>; }; }; &gpio { status = "okay"; gpio-line-names = /* A */ "LOCATORLED_STATUS_N", "LOCATORBTN_N", "BMC_READY_N", "FM_SPD_DDRCPU_LVLSHFT_EN", "", "", "", "", /* B */ "NODE_ID_1", "NODE_ID_2", "PSU_FAN_FAIL_N", "", "", "", "", "GPIO_RST", /* C */ "", "", "", "", "", "", "", "", /* D */ "FP_PWR_BTN_MUX_N", "FM_BMC_PWRBTN_OUT_N", "FP_RST_BTN_N", "RST_BMC_RSTBTN_OUT_N", "NMI_BTN_N", "BMC_NMI", "", "", /* E */ "", "", "", "FM_ME_RCVR_N", "", "", "", "", /* F */ "BMC_SMB_SEL_N", "FM_CPU2_DISABLE_COD_N", "FM_REMOTE_DEBUG_BMC_EN", "FM_CPU_ERR0_LVT3_EN", "FM_CPU_ERR1_LVT3_EN", "FM_CPU_ERR2_LVT3_EN", "FM_MEM_THERM_EVENT_CPU1_LVT3_N", "FM_MEM_THERM_EVENT_CPU2_LVT3_N", /* G */ "HWM_BAT_EN", "", "BMC_PHYRST_N", "FM_BIOS_SPI_BMC_CTRL", "BMC_ALERT1_N", "BMC_ALERT2_N", "BMC_ALERT3_N", "IRQ_SML0_ALERT_N", /* H */ "BMC_SMB_PRESENT_1_N", "FM_PCH_CORE_VID_0", "FM_PCH_CORE_VID_1", "", "FM_MFG_MODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN", /* I */ "IRQ_PVDDQ_ABCD_CPU1_VRHOT_LVC3_N", "IRQ_PVDDQ_ABCD_CPU2_VRHOT_LVC3_N", "IRQ_PVDDQ_EFGH_CPU1_VRHOT_LVC3_N", "IRQ_PVDDQ_EFGH_CPU2_VRHOT_LVC3_N", "", "", "", "", /* J */ "", "", "", "", "", "", "", "", /* K */ "", "", "", "", "", "", "", "", /* L */ "", "", "", "", "", "", "", "", /* M */ "FM_PVCCIN_CPU1_PWR_IN_ALERT_N", "FM_PVCCIN_CPU2_PWR_IN_ALERT_N", "IRQ_PVCCIN_CPU1_VRHOT_LVC3_N", "IRQ_PVCCIN_CPU2_VRHOT_LVC3_N", "FM_CPU1_PROCHOT_BMC_LVC3_N", "", "FM_CPU1_MEMHOT_OUT_N", "FM_CPU2_MEMHOT_OUT_N", /* N */ "", "", "", "", "", "", "", "", /* O */ "", "", "", "", "", "", "", "", /* P */ "", "", "", "", "", "", "", "", /* Q */ "", "", "", "", "", "", "RST_GLB_RST_WARN_N", "PCIE_WAKE_N", /* R */ "", "", "FM_BMC_SUSACK_N", "FM_BMC_EUP_LOT6_N", "", "FM_BMC_PCH_SCI_LPC_N", "", "", /* S */ "FM_DBP_PRESENT_N", "FM_CPU2_SKTOCC_LCT3_N", "FM_CPU1_FIVR_FAULT_LVT3", "FM_CPU2_FIVR_FAULT_LVT3", "", "", "", "", /* T */ "", "", "", "", "", "", "", "", /* U */ "", "", "", "", "", "", "", "", /* V */ "", "", "", "", "", "", "", "", /* W */ "", "", "", "", "", "", "", "", /* X */ "", "", "", "", "", "", "", "", /* Y */ "FM_SLPS3_N", "FM_SLPS4_N", "", "FM_BMC_ONCTL_N_PLD", "", "", "", "", /* Z */ "FM_CPU_MSMI_CATERR_LVT3_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N", "", "", "", "", /* AA */ "FM_CPU1_THERMTRIP_LATCH_LVT3_N", "FM_CPU2_THERMTRIP_LATCH_LVT3_N", "FM_BIOS_POST_COMPLT_N", "DBP_BMC_SYSPWROK", "", "IRQ_SML0_ALERT_MUX_N", "IRQ_SMI_ACTIVE_N", "IRQ_NMI_EVENT_N", /* AB */ "FM_PCH_BMC_THERMTRIP_N", "PWRGD_SYS_PWROK", "ME_OVERRIDE", "IRQ_BMC_PCH_SMI_LPC_N", "", "", "", "", /* AC */ "", "", "", "", "", "", "", ""; }; &adc { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */ &pinctrl_adc1_default /* 5VSB */ &pinctrl_adc2_default /* CPU1 */ &pinctrl_adc3_default /* NC */ &pinctrl_adc4_default /* VCCMABCD */ &pinctrl_adc5_default /* VCCMEFGH */ &pinctrl_adc6_default /* NC */ &pinctrl_adc7_default /* NC */ &pinctrl_adc8_default /* PVNN_PCH */ &pinctrl_adc9_default /* 1P05PCH */ &pinctrl_adc10_default /* 1P8PCH */ &pinctrl_adc11_default /* BAT */ &pinctrl_adc12_default /* 3V */ &pinctrl_adc13_default /* 5V */ &pinctrl_adc14_default /* 12V */ &pinctrl_adc15_default>; /* GND */ };