Lines Matching +full:20 +full:a
9 # | | + $h1.20 | | | + $h2.20 |
20 # | | vid 20 vid 20 | |
26 # | | vid 10 pvid untagged vid 20 pvid untagged | |
68 # | | vid 20 pvid untagged | | | | vid 20 pvid untagged | |
72 # | | | vid 20 | | | | | vid 20 | |
81 # | | + w2.20 | | | | + w2.20 | |
109 vlan_create $h1 20 v$h1 198.51.100.1/24
114 vlan_destroy $h1 20
125 vlan_create $h2 20 v$h2 198.51.100.2/24
130 vlan_destroy $h2 20
178 bridge vlan add vid 20 dev vx20 pvid untagged
183 bridge vlan add vid 20 dev $swp1
188 bridge vlan add vid 20 dev $swp2
205 bridge vlan del vid 20 dev $swp2
210 bridge vlan del vid 20 dev $swp1
215 bridge vlan del vid 20 dev vx20
272 bridge vlan add vid 20 dev w1
294 bridge vlan add vid 20 dev vx20 pvid untagged
298 vlan_create w2 20 vw2 $host_addr2/24
384 # configured. Try the other scenario of attaching these devices to a bridge
406 bridge vlan add vid 20 dev vx20 pvid untagged
421 ping_test $h1.20 198.51.100.2 ": local->local vid 20"
424 ping_test $h1.20 198.51.100.3 ": local->remote 1 vid 20"
425 ping_test $h1.20 198.51.100.4 ": local->remote 2 vid 20"
443 # those are dropped due to MAC address mismatch; and skip_sw is a no-go
487 local -a expects=("${@}")
489 local -a counters=($h2 "vx10 ns1" "vx20 ns1" "vx10 ns2" "vx20 ns2")
502 local -a t0s=($(flood_fetch_stats "${counters[@]}"))
505 local -a t1s=($(flood_fetch_stats "${counters[@]}"))
527 local -a expects=("${@}")
540 __test_flood ca:fe:be:ef:13:37 198.51.100.100 20 "flood vlan 20" \
567 local -a expects=(0 0 0 0 0)
577 local -a targets=("$h2_mac $h2"
596 log_info "unicast vlan 20"
602 vxlan_fdb_add_del add 20 $target
605 __test_unicast $h2_mac 198.51.100.2 0 20 "local MAC unicast"
606 __test_unicast $r1_mac 198.51.100.3 2 20 "remote MAC 1 unicast"
607 __test_unicast $r2_mac 198.51.100.4 4 20 "remote MAC 2 unicast"
610 vxlan_fdb_add_del del 20 $target
616 local -a expects=(0 0 0 0 0)
649 # Add a new VLAN and test that it does not affect flooding
685 local -a expects=(0 0 0 0 0)
701 # Send a packet with source mac set to $mac from host w2 and check that
702 # a corresponding entry is created in the VxLAN device
705 in_ns ns1 $MZ w2 -Q $vid -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff \
740 in_ns ns1 $MZ w2 -Q $vid -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff \
772 in_ns ns1 $MZ w2 -Q $vid -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff \
782 in_ns ns1 $MZ w2 -Q $vid -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff \
811 log_info "learning vlan 20"
815 vid=20