net/forwarding/vxlan_bridge_1q.sh

6 # |  + $h1.10             |                          |  + $h2.10              |
19 # | |     vid 10                                             vid 10         | |
26 # | |    vid 10 pvid untagged                  vid 20 pvid untagged         | |
61 # | |    vid 10 pvid untagged       | |   | |    vid 10 pvid untagged       | |
71 # | |  | vid 10                     | |   | |  | vid 10                     | |
78 # | |  | + w2.10                    | |   | |  | + w2.10                    | |
108 	vlan_create $h1 10 v$h1 192.0.2.1/28
115 	vlan_destroy $h1 10
124 	vlan_create $h2 10 v$h2 192.0.2.2/28
131 	vlan_destroy $h2 10
170 	bridge vlan add vid 10 dev vx10 pvid untagged
182 	bridge vlan add vid 10 dev $swp1
187 	bridge vlan add vid 10 dev $swp2
206 	bridge vlan del vid 10 dev $swp2
211 	bridge vlan del vid 10 dev $swp1
221 	bridge vlan del vid 10 dev vx10
271 	bridge vlan add vid 10 dev w1
283 	bridge vlan add vid 10 dev vx10 pvid untagged
297         vlan_create w2 10 vw2 $host_addr1/28
384 # configured. Try the other scenario of attaching these devices to a bridge
403 	bridge vlan add vid 10 dev vx10 pvid untagged
420 	ping_test $h1.10 192.0.2.2 ": local->local vid 10"
422 	ping_test $h1.10 192.0.2.3 ": local->remote 1 vid 10"
423 	ping_test $h1.10 192.0.2.4 ": local->remote 2 vid 10"
443 	# those are dropped due to MAC address mismatch; and skip_sw is a no-go
487 	local -a expects=("${@}")
489 	local -a counters=($h2 "vx10 ns1" "vx20 ns1" "vx10 ns2" "vx20 ns2")
502 	local -a t0s=($(flood_fetch_stats "${counters[@]}"))
503 	$MZ $h1 -Q $vid -c 10 -d 100msec -p 64 -b $mac -B $dst -t icmp -q
505 	local -a t1s=($(flood_fetch_stats "${counters[@]}"))
527 	local -a expects=("${@}")
538 	__test_flood de:ad:be:ef:13:37 192.0.2.100 10 "flood vlan 10" \
539 		10 10 0 10 0
541 		10 0 10 0 10
567 	local -a expects=(0 0 0 0 0)
568 	expects[$hit_idx]=10
577 	local -a targets=("$h2_mac $h2"
582 	log_info "unicast vlan 10"
585 		vxlan_fdb_add_del add 10 $target
588 	__test_unicast $h2_mac 192.0.2.2 0 10 "local MAC unicast"
589 	__test_unicast $r1_mac 192.0.2.3 1 10 "remote MAC 1 unicast"
590 	__test_unicast $r2_mac 192.0.2.4 3 10 "remote MAC 2 unicast"
593 		vxlan_fdb_add_del del 10 $target
616 	local -a expects=(0 0 0 0 0)
619 	local vid=10
624 	expects[0]=10; expects[1]=10; expects[3]=10
632 	bridge vlan add vid 10 dev vx10
634 	expects[0]=10; expects[1]=0; expects[3]=0
642 	bridge vlan add vid 10 dev vx10 pvid untagged
644 	expects[0]=10; expects[1]=10; expects[3]=10
649 	# Add a new VLAN and test that it does not affect flooding
654 	expects[0]=10; expects[1]=10; expects[3]=10
665 	bridge vlan del vid 10 dev vx10
667 	expects[0]=10; expects[1]=0; expects[3]=0
675 	bridge vlan add vid 10 dev vx10 pvid untagged
677 	expects[0]=10; expects[1]=10; expects[3]=10
685 	local -a expects=(0 0 0 0 0)
696 	expects[0]=10; expects[$idx1]=10; expects[$idx2]=10
701 	# Send a packet with source mac set to $mac from host w2 and check that
702 	# a corresponding entry is created in the VxLAN device
705 	in_ns ns1 $MZ w2 -Q $vid -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff \
720 	expects[0]=0; expects[$idx1]=10; expects[$idx2]=0
732 	expects[0]=10; expects[$idx1]=10; expects[$idx2]=10
740 	in_ns ns1 $MZ w2 -Q $vid -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff \
750 	expects[0]=0; expects[$idx1]=10; expects[$idx2]=0
761 	expects[0]=10; expects[$idx1]=10; expects[$idx2]=10
772 	in_ns ns1 $MZ w2 -Q $vid -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff \
782 	in_ns ns1 $MZ w2 -Q $vid -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff \
797 	local vid=10
807 	log_info "learning vlan 10"