Lines Matching +full:10 +full:a
12 # | $h1.10 + | | + $h2.10 |
22 # | | $swp1.10 + + $swp2.10 | |
58 vlan_create $h1 10 v$h1 192.0.2.1/28
67 vlan_destroy $h1 10
74 vlan_create $h2 10 v$h2 192.0.2.3/28
79 vlan_destroy $h2 10
106 # By default, a link-local address is generated when netdevice becomes
107 # up. Adding an address to the bridge will cause creating a RIF for it.
114 vlan_create $swp2 10
115 ip link set dev $swp2.10 master br0
130 ip link set dev $swp2.10 nomaster
131 vlan_destroy $swp2 10
200 # First add {port, VID}->FID for swp1.10, then add a RIF and verify that
202 vlan_create $swp1 10
203 ip link set dev $swp1.10 master br0
208 ip neigh replace dev br0 192.0.2.1 lladdr $(mac_get $h1.10)
215 ping_do $h1.10 192.0.2.18
218 tc_check_at_least_x_packets "dev $swp1 egress" 101 10
226 ip link set dev $swp1.10 nomaster
227 vlan_destroy $swp1 10
234 # First add an address to the bridge, which will create a RIF on top of
235 # it, then add a new {port, VID}->FID mapping and verify that packets
238 vlan_create $swp1 10
239 ip link set dev $swp1.10 master br0
243 ip neigh replace dev br0 192.0.2.1 lladdr $(mac_get $h1.10)
250 ping_do $h1.10 192.0.2.18
253 tc_check_at_least_x_packets "dev $swp1 egress" 101 10
256 log_test "Add {port, VID}->FID mapping for FID with a RIF"
260 ip link set dev $swp1.10 nomaster
261 vlan_destroy $swp1 10