Lines Matching +full:adc +full:- +full:joystick

1 /* SPDX-License-Identifier: GPL-2.0 */
5 /* "PU" == "power-up value", as tested on PCI168 PCI rev. 10
85 …REQ_SUSPECTED_66200	0x06 | SOUNDFORMAT_XTAL2 /* 66200 (13240 * 5); 64000 may have been nicer :-\ */
111 #define IDX_IO_TIMER_VALUE	0x60 /* found this timer area by pure luck :-) */
122   /* some IRQ bit in here might also be used to signal a power-management timer
150    * in case playback is active? Or is this driver-induced?
179 	 * --> FIFO/timing settings???) */
186 #define IDX_IO_6CH		0x6C	/* unknown; fully read-writable */
228   /* enable to have the latch continuously accept ADC values
232   /* joystick data (measured axes) ready for reading: */
240   /* An internet search for "gameport latch ADC" should provide some insight
253 	 * --> reserved bits? */
257    *  internal ADC counter increment.
259    * 00 --> standard frequency
260    * 10 --> 1/2
261    * 01 --> 1/20
262    * 11 --> 1/200: */
285  * (especially since register 0x04 has a "non-empty" value 0xfe) */
328 …#define MIXER_ADVCTL2_LPBK		0x0080 /* Loopback mode -- Win driver: "WaveOut3DBypass"? mutes WaveOu…
329   #define MIXER_ADVCTL2_MS		0x0100 /* Mic Select 0=Mic1, 1=Mic2 -- Win driver: "ModemOutSelect"?? */