61 #  define LOGNAME			"msnd_classic"  macro
65 #  define LOGNAME			"snd_msnd_pinnacle"  macro
126 				LOGNAME ": Play underflow %i\n",  in snd_msnd_eval_dsp_msg()
133 			dev_dbg(chip->card->dev, LOGNAME ": Record overflow\n");  in snd_msnd_eval_dsp_msg()
138 			dev_dbg(chip->card->dev, LOGNAME  in snd_msnd_eval_dsp_msg()
151 		dev_dbg(chip->card->dev, LOGNAME ": HIMT message %d 0x%02x\n",  in snd_msnd_eval_dsp_msg()
203 	dev_err(chip->card->dev, LOGNAME ": Cannot reset DSP\n");  in snd_msnd_reset_dsp()
219 		dev_err(card->dev, LOGNAME ": I/O port conflict\n");  in snd_msnd_probe()
231 	dev_info(card->dev, LOGNAME ": %s, "  in snd_msnd_probe()
291 	dev_info(card->dev, LOGNAME ": %s revision %s, Xilinx version %s, "  in snd_msnd_probe()
383 		dev_err(card->dev, LOGNAME ": Error loading " INITCODEFILE);  in upload_dsp_code()
388 		dev_err(card->dev, LOGNAME ": Error loading " PERMCODEFILE);  in upload_dsp_code()
394 		dev_warn(card->dev, LOGNAME ": Error uploading to DSP\n");  in upload_dsp_code()
398 	dev_info(card->dev, LOGNAME ": DSP firmware uploaded\n");  in upload_dsp_code()
431 		dev_warn(card->dev, LOGNAME ": Cannot initialize SMA\n");  in snd_msnd_initialize()
441 		dev_warn(card->dev, LOGNAME ": Cannot upload DSP code\n");  in snd_msnd_initialize()
450 			dev_err(card->dev, LOGNAME ": DSP reset timeout\n");  in snd_msnd_initialize()
472 		dev_warn(card->dev, LOGNAME ": DSP reset failed\n");  in snd_msnd_dsp_full_reset()
502 	dev_warn(chip->card->dev, LOGNAME ": ADC calibration failed\n");  in snd_msnd_calibrate_adc()
533 		dev_err(card->dev, LOGNAME ": Couldn't grab IRQ %d\n", chip->irq);  in snd_msnd_attach()
543 		dev_err(card->dev, LOGNAME  in snd_msnd_attach()
550 		dev_err(card->dev, LOGNAME  in snd_msnd_attach()
562 		dev_err(card->dev, LOGNAME ": error creating new PCM device\n");  in snd_msnd_attach()
568 		dev_err(card->dev, LOGNAME ": error creating new Mixer device\n");  in snd_msnd_attach()
583 			dev_err(card->dev, LOGNAME  in snd_msnd_attach()
615 		dev_err(chip->card->dev, LOGNAME ": %s: I/O error\n", __func__);  in snd_msnd_write_cfg()
705 	dev_info(chip->card->dev, LOGNAME ": Resetting all devices\n");  in snd_msnd_pinnacle_cfg_reset()
786 		dev_warn(pdev, LOGNAME ": io, irq and mem must be set\n");  in snd_msnd_isa_match()
799 		dev_err(pdev, LOGNAME ": \"io\" - DSP I/O base must be set "  in snd_msnd_isa_match()
806 		dev_err(pdev, LOGNAME  in snd_msnd_isa_match()
819 		dev_err(pdev, LOGNAME  in snd_msnd_isa_match()
830 		dev_err(pdev, LOGNAME ": \"mem\" - must be set to "  in snd_msnd_isa_match()
838 		dev_info(pdev, LOGNAME ": Assuming PnP mode\n");  in snd_msnd_isa_match()
840 		dev_info(pdev, LOGNAME  in snd_msnd_isa_match()
861 		dev_info(pdev, LOGNAME ": Assuming PnP mode\n");  in snd_msnd_isa_probe()
904 	dev_info(pdev, LOGNAME ": Non-PnP mode: configuring at port 0x%lx\n",  in snd_msnd_isa_probe()
909 		dev_err(pdev, LOGNAME ": Config port 0x%lx conflict\n",  in snd_msnd_isa_probe()
930 		dev_info(pdev, LOGNAME  in snd_msnd_isa_probe()
945 		dev_info(pdev, LOGNAME  in snd_msnd_isa_probe()
958 		dev_info(pdev, LOGNAME  in snd_msnd_isa_probe()
996 		dev_err(pdev, LOGNAME ": Probe failed\n");  in snd_msnd_isa_probe()
1002 		dev_err(pdev, LOGNAME ": Attach failed\n");  in snd_msnd_isa_probe()
1105 		dev_err(&pcard->card->dev, LOGNAME ": Probe failed\n");  in snd_msnd_pnp_detect()
1111 		dev_err(&pcard->card->dev, LOGNAME ": Attach failed\n");  in snd_msnd_pnp_detect()