firewire/dice/dice-interface.h

32  * size values are measured in quadlets.  Read-only.
60  * A bitmask with asynchronous events; read-only.  When any event(s) happen,
128  * Status of the sample clock; read-only.
137  * Status of all clock sources; read-only.
173  * The measured rate of the current clock source, in Hz; read-only.
180  * early release because they can handle firmware only which supports the
186  * read-only.
191  * Supported sample rates and clock sources; read-only.
216  * Names of all clock sources; read-only.  Quadlets are byte-swapped.  Names
229  * The number of supported capture streams; read-only.
234  * The size of one stream's register block, in quadlets; read-only.  The
247  * The number of audio channels; read-only.  There will be one quadlet per
253  * The number of MIDI ports, 0-8; read-only.  If > 0, there will be one
260  * SCODE_800 is only available in Dice III.
265  * Names of all audio channels; read-only.  Quadlets are byte-swapped.  Names
273  * Audio IEC60958 capabilities; read-only.  Bitmask with one bit per audio
291  * The number of supported playback streams; read-only.
296  * The size of one stream's register block, in quadlets; read-only.  The
316  * The number of audio channels; read-only.  There will be one quadlet per
322  * The number of MIDI ports, 0-8; read-only.  If > 0, there will be one
328  * Names of all audio channels; read-only.  Quadlets are byte-swapped.  Names
336  * Audio IEC60958 capabilities; read-only.  Bitmask with one bit per audio
354  * Current clock source; read-only.
359  * Clock source is locked (boolean); read-only.
365  * _NONE; read-only.
370  * ADAT user data bits; read-only.