Lines Matching full:attribute
132 * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the
141 * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
144 * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically,
196 * %NL80211_ATTR_WANT_1X_4WAY_HS attribute flag. Drivers supporting this
197 * offload may reject the %NL80211_CMD_CONNECT when the attribute flag is
284 * attribute given in wiphy capabilities.
331 * to or will include the new %NL80211_ATTR_MLO_LINKS attribute.
333 * now need to be given the %NL80211_ATTR_MLO_LINK_ID attribute, e.g. to
383 * attribute %NL80211_ATTR_IFINDEX. If multiple BSSID advertisements are
533 * using the %NL80211_ATTR_IE attribute. The first cycle of the
536 * scans, it will allow such when the caller provides the flag attribute
617 * included %NL80211_ATTR_FRAME attribute contains the management frame
620 * case the %NL80211_ATTR_FRAME attribute is replaced with a
627 * %NL80211_ATTR_PREV_BSSID attribute is used to specify whether the
628 * request is for the initial association to an ESS (that attribute not
629 * included) or for reassociation within the ESS (that attribute is
648 * FREQ attribute (for the initial frequency if no peer can be found)
649 * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those
653 * given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not
658 * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute
659 * to identify the device, and the TESTDATA blob attribute to pass through
665 * %NL80211_ATTR_SSID attribute, and can optionally specify the association
697 * This attribute is ignored if driver does not support roam scan.
700 * determined by the %NL80211_ATTR_STATUS_CODE attribute (0 = success,
740 * radio. The %NL80211_ATTR_COOKIE attribute must be given as well to
751 * requires an interface index, a frame type attribute (optional for
753 * and a match attribute containing the first few bytes of the frame
758 * The %NL80211_ATTR_RECEIVE_MULTICAST flag attribute can be given if
780 * counters which will be updated to the current value. This attribute
869 * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
874 * @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason
898 * %NL80211_ATTR_TDLS_ACTION attribute determines the type of frame to be
911 * For the event, the %NL80211_ATTR_MAC attribute carries the TA and
1021 * by the %NL80211_ATTR_VENDOR_ID attribute and a sub-command in
1024 * For feature advertisement, the %NL80211_ATTR_VENDOR_DATA attribute is
1025 * used in the wiphy data as a nested attribute containing descriptions
1031 * that attribute is not included, QoS mapping is disabled. Since this
1041 * If the admitted time attribute is not added then the request just checks
1085 * %NL80211_ATTR_NAN_MASTER_PREF attribute and optional
1093 * with %NL80211_ATTR_NAN_FUNC nested attribute. When called, this
1119 * This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and
1177 * %NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH
1207 * the %NL80211_ATTR_FTM_RESPONDER_STATS attribute.
1211 * %NL80211_ATTR_PEER_MEASUREMENTS attribute. Optionally, MAC address
1214 * If a timeout is requested, use the %NL80211_ATTR_TIMEOUT attribute.
1254 * Here attribute %NL80211_ATTR_MAC is used to specify connected mesh
1259 * is passed using %NL80211_ATTR_TID_CONFIG attribute.
1303 * %NL80211_ATTR_MLO_LINK_ID attribute is used for the new link.
1619 * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors
1627 * %NL80211_ATTR_WIPHY_CHANNEL_TYPE attribute or the attributes
1630 * @NL80211_ATTR_CHANNEL_WIDTH: u32 attribute containing one of the values
1641 * this attribute)
1645 * This attribute is now deprecated.
1678 * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key
1679 * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the
1702 * given for %NL80211_CMD_GET_STATION, nested attribute containing
1713 * info given for %NL80211_CMD_GET_MPATH, nested attribute described at
1721 * For example, 'CR', for Costa Rica. This attribute is used by the kernel
1722 * to query the CRDA to retrieve one regulatory domain. This attribute can
1743 * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all
1744 * supported interface types, each a flag attribute with the number
1754 * a single scan request, a wiphy attribute.
1756 * scan with a single scheduled scan request, a wiphy attribute.
1762 * used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute.
1764 * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
1765 * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
1774 * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies
1778 * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header
1781 * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets)
1791 * due to considerations from a beacon hint. This attribute reflects
1793 * attributes consists of a nested attribute containing
1796 * due to considerations from a beacon hint. This attribute reflects
1798 * attributes consists of a nested attribute containing
1812 * this attribute can be used with %NL80211_CMD_ASSOCIATE and
1819 * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
1832 * attribute is also used as a flag in the wiphy information to
1840 * socket. If this attribute is missing, then legacy behavior of sending
1856 * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating
1865 * This attribute is also sent in response to @NL80211_CMD_GET_WIPHY,
1879 * Reassociate Request frame (with the value of this attribute in the
1883 * @NL80211_ATTR_KEY: key information in a nested attribute with
1886 * and join_ibss(), key information is in a nested attribute each
1903 * the survey response for %NL80211_CMD_GET_SURVEY, nested attribute
1908 * cache, a wiphy attribute.
1911 * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that
1921 * rates based on negotiated supported rates information. This attribute
1931 * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
1935 * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a
1936 * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
1939 * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a
1940 * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
1943 * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
1950 * nested attribute with %NL80211_ATTR_CQM_* sub-attributes.
1952 * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command
2008 * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags
2014 * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
2034 * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more
2052 * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
2056 * this attribute contains the interface combinations of the first radio.
2059 * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
2064 * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information
2068 * nested array attribute containing an entry for each band, with the entry
2086 * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration
2094 * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching
2100 * applications use this attribute.
2101 * This attribute is used with %NL80211_CMD_TRIGGER_SCAN and
2118 * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices
2120 * with support for the features listed in this attribute, see
2128 * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from
2132 * This attribute holds a bitmap of the supported protocols for
2139 * this feature during association. This is a flag attribute.
2142 * this feature during association. This is a flag attribute.
2145 * this feature during association. This is a flag attribute.
2148 * this feature during association. This is a flag attribute.
2180 * this attribute is (depending on the driver capabilities) added to
2203 * Status code). However, those fields are included in the attribute data
2204 * for all authentication algorithms to keep the attribute definition
2223 * carried in a u32 attribute
2228 * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum
2249 * &enum nl80211_protocol_features, the attribute is a u32.
2251 * @NL80211_ATTR_SPLIT_WIPHY_DUMP: flag attribute, userspace supports
2272 * @NL80211_ATTR_CH_SWITCH_COUNT: u32 attribute specifying the number of TBTT's
2274 * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission
2309 * u8 attribute.
2315 * attribute is also used for vendor command feature advertisement
2326 * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many
2335 * @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum
2341 * @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface
2354 * attribute, the notifications will be sent to the %NL80211_MCGRP_NAN
2365 * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
2369 * shall support Radio Resource Measurements (11k). This attribute can be
2381 * @NL80211_ATTR_WIPHY_DYN_ACK: flag attribute used to enable ACK timeout
2387 * @NL80211_ATTR_TSID: a TSID value (u8 attribute)
2388 * @NL80211_ATTR_USER_PRIO: user priority value (u8 attribute)
2390 * (per second) (u16 attribute)
2399 * @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device
2424 * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
2428 * scheduled scan supported by the device (u32), a wiphy attribute.
2430 * a scan plan (u32), a wiphy attribute.
2432 * a scan plan (u32), a wiphy attribute.
2438 * Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan.
2439 * @NL80211_ATTR_PBSS: flag attribute. If set it means operate
2443 * @NL80211_ATTR_BSS_SELECT: nested attribute for driver supporting the
2447 * it contains the behaviour-specific attribute containing the parameters for
2453 * @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment
2455 * @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes:
2472 * This attribute is used only if all interfaces are in monitor mode.
2473 * Set this attribute in order to monitor packets using the given MU-MIMO
2484 * attribute must not be included).
2489 * maximum measurement duration allowed. This attribute is used with
2492 * @NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY: flag attribute that indicates
2508 * would be set. This attribute is used with
2514 * attribute.
2515 * @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute.
2520 * Request/Response frame protection. This attribute contains the 16 octet
2524 * packets should be send out as unicast to all stations (flag attribute).
2540 * better BSSs. The attribute value is a packed structure
2544 * u32 attribute with an &enum nl80211_timeout_reason value. This is used,
2569 * @NL80211_ATTR_PMK: attribute for passing PMK key material. Used with
2574 * support this attribute specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME
2577 * @NL80211_ATTR_SCHED_SCAN_MULTI: flag attribute which user-space shall use to
2582 * @NL80211_ATTR_WANT_1X_4WAY_HS: flag attribute which user-space can include
2589 * authentication operation (u32 attribute with an
2592 * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user
2593 * space supports external authentication. This attribute shall be used
2597 * attribute deprecated for %NL80211_CMD_START_AP, use
2601 * u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED.
2603 * @NL80211_ATTR_TXQ_STATS: TXQ statistics (nested attribute, see &enum
2616 * @NL80211_ATTR_FTM_RESPONDER: nested attribute which user-space can include
2621 * @NL80211_ATTR_FTM_RESPONDER_STATS: Nested attribute with FTM responder
2625 * if the attribute is not given no timeout is requested. Note that 0 is an
2641 * allows to set Tx power for a station. If this attribute is not included,
2646 * @NL80211_ATTR_SAE_PASSWORD: attribute for passing SAE password material. It
2652 * @NL80211_ATTR_HE_OBSS_PD: nested attribute for OBSS Packet Detection
2657 * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. (u8 attribute)
2659 * the allowed channel bandwidth configurations. (u8 attribute)
2665 * @NL80211_ATTR_HE_BSS_COLOR: nested attribute for BSS Color Settings.
2667 * @NL80211_ATTR_IFTYPE_AKM_SUITES: nested array attribute, with each entry
2669 * attribute is sent in a response to %NL80211_CMD_GET_WIPHY indicating
2675 * nested attribute with &enum nl80211_tid_config_attr sub-attributes;
2712 * @NL80211_ATTR_SCAN_FREQ_KHZ: nested attribute with KHz frequencies
2718 * discovery. It is a nested attribute, see
2720 * nested attribute to disable this feature and delete the templates.
2723 * unsolicited broadcast probe response. It is a nested attribute, see
2725 * nested attribute to disable this feature and delete the templates.
2735 * This is a u8 attribute that encapsulates one of the values from
2743 * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and
2750 * @NL80211_ATTR_COLOR_CHANGE_COUNT: u8 attribute specifying the number of TBTT's
2752 * @NL80211_ATTR_COLOR_CHANGE_COLOR: u8 attribute specifying the color that we are
2757 * @NL80211_ATTR_MBSSID_CONFIG: Nested attribute for multiple BSSID
2759 * Kernel uses this attribute to indicate the driver's support for MBSSID
2761 * Userspace should use this attribute to configure per interface MBSSID
2776 * @NL80211_ATTR_AP_SETTINGS_FLAGS: u32 attribute contains ap settings flags,
2777 * enumerated in &enum nl80211_ap_settings_flags. This attribute shall be
2791 * @NL80211_ATTR_MLO_SUPPORT: Flag attribute to indicate user space supports MLO
2792 * connection. Used with %NL80211_CMD_CONNECT. If this attribute is not
2795 * @NL80211_ATTR_MAX_NUM_AKM_SUITES: U16 attribute. Indicates maximum number of
2798 * attribute is not present userspace shall consider maximum number of AKM
2800 * number prior to the introduction of this attribute.
2826 * timestamping can be enabled for concurrently (u16), a wiphy attribute.
2830 * be enabled or not (flag attribute).
2832 * @NL80211_ATTR_EMA_RNR_ELEMS: Optional nested attribute for
2833 * reduced neighbor report (RNR) elements. This attribute can be used
2843 * @NL80211_ATTR_MLO_LINK_DISABLED: Flag attribute indicating that the link is
2850 * @NL80211_ATTR_MLO_TTLM_DLINK: Binary attribute specifying the downlink TID to
2854 * @NL80211_ATTR_MLO_TTLM_ULINK: Binary attribute specifying the uplink TID to
2859 * @NL80211_ATTR_ASSOC_SPP_AMSDU: flag attribute used with
2863 * @NL80211_ATTR_WIPHY_RADIOS: Nested attribute describing physical radios
2866 * @NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS: Nested attribute listing the
2872 * @NL80211_ATTR_MAX: highest attribute number currently defined
3544 * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved
3704 * These attribute types are used with %NL80211_STA_INFO_TXRATE
3710 * (>6.5535Gbps) only 32-bit attribute is included.
3711 * User space tools encouraged to use the 32-bit attribute and fall
3714 * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
3796 * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM
3799 * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved
3826 * These attribute types are used with %NL80211_ATTR_STA_INFO
3829 * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
3840 * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
3855 * attribute, like NL80211_STA_INFO_TX_BITRATE.
3856 * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute
3878 * This is a nested attribute where each the inner attribute number is the
3884 * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment
3904 * @NL80211_STA_INFO_MAX: highest possible station info attribute
3963 * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved
3971 * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment
3972 * @NL80211_TID_STATS_TXQ_STATS: TXQ stats (nested attribute)
3974 * @NL80211_TID_STATS_MAX: highest numbered attribute here
3992 * @__NL80211_TXQ_STATS_INVALID: attribute number 0 is reserved
4007 * @NL80211_TXQ_STATS_MAX: highest numbered attribute here
4048 * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting
4051 * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
4062 * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number
4086 * @__NL80211_BAND_IFTYPE_ATTR_INVALID: attribute number 0 is reserved
4087 * @NL80211_BAND_IFTYPE_ATTR_IFTYPES: nested attribute containing a flag attribute
4110 * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band attribute currently defined
4134 * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
4139 * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as
4144 * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as
4147 * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using
4159 * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
4192 * @__NL80211_WMMR_INVALID: attribute number 0 is reserved
4214 * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved
4242 * channel. A channel that has the INDOOR_ONLY attribute can only be
4251 * off-channel on a channel that has the IR_CONCURRENT attribute set can be
4257 * attribute for IR is disallowed for master interfaces (IBSS, AP).
4263 * This is a nested attribute that contains the wmm limitation per AC.
4297 * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
4360 * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved
4364 * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number
4426 * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
4447 * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
4473 * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
4479 * if this attribute is in a match set of its own, then it is treated as
4484 * attribute) is if there's only a single matchset with the RSSI attribute.
4490 * RSSI-based BSS selection. The attribute value is a packed structure
4496 * attribute number currently defined
4610 * assumed if the attribute is not set.
4632 * These attribute types are used with %NL80211_ATTR_SURVEY_INFO
4635 * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
4651 * @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment
4654 * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
4830 * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
4954 * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
4976 * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
4986 * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number
5057 * attribute.
5062 * attribute must be provided as well
5064 * attribute must be provided as well
5068 * attribute must be provided as well
5077 * attribute must be provided as well
5099 * These values are used with the %NL80211_BSS_CHAN_WIDTH attribute.
5157 * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
5159 * if the %NL80211_BSS_BEACON_IES attribute is present and the data is
5164 * If present, the @NL80211_BSS_PRESP_DATA attribute indicates that the
5172 * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information
5180 * @NL80211_BSS_TSF is known to be from a probe response (flag attribute)
5184 * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment
5197 * @NL80211_BSS_USE_FOR: u32 bitmap attribute indicating what the BSS can be
5202 * This is a u64 attribute containing a bitmap of values from
5203 * &enum nl80211_cannot_use_reasons, note that the attribute may be missing
5206 * @NL80211_BSS_MAX: highest BSS attribute
5249 * The BSS status is a BSS attribute in scan dumps, which
5273 * the attribute for this on CONNECT commands.
5357 * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags
5365 * @NL80211_KEY_MAX: highest key attribute
5402 * @NL80211_TXRATE_MAX: highest TX rate attribute
5503 * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon
5508 * @NL80211_ATTR_CQM_MAX: highest key attribute
5576 * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values
5582 * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribute, if set indicates
5594 * the max value is advertised by the driver in this attribute on
5599 * the max value is advertised by the driver in this attribute on
5610 * @NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE: This attribute will be useful
5641 * enum nl80211_packet_pattern_attr - packet pattern attribute
5642 * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute
5659 * @MAX_NL80211_PKTPAT: max attribute number
5713 * which are passed in an array of nested attributes, each nested attribute
5720 * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
5723 * When reporting wakeup. it is a u32 attribute containing the 0-based
5739 * attribute contains the original length.
5742 * attribute if the packet was truncated somewhere.
5745 * be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN attribute
5749 * attribute if the packet was truncated somewhere.
5751 * "TCP connection wakeup" for more details. This is a nested attribute
5762 * is detected. This is a nested attribute that contains the
5767 * attribute is also sent in a response to
5770 * @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute
5776 * Each element in the array is a nested attribute that contains
5777 * one optional %NL80211_ATTR_SSID attribute and one optional
5778 * %NL80211_ATTR_SCAN_FREQUENCIES attribute. At least one of
5786 * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
5892 * For feature advertising, a u32 attribute holding the maximum length
5903 * u32 attribute holding the maximum length
5908 * @MAX_NL80211_WOWLAN_TCP: highest attribute number
5945 * enum nl80211_attr_coalesce_rule - coalesce rule attribute
5946 * @__NL80211_COALESCE_RULE_INVALID: invalid number for nested attribute
5953 * @NL80211_ATTR_COALESCE_RULE_MAX: max attribute number
5983 * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a
5984 * flag attribute for each interface type in this set
5986 * @MAX_NL80211_IFACE_LIMIT: highest attribute number
6004 * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of
6007 * in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE.
6008 * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that
6012 * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many
6014 * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap
6016 * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap
6018 * @NL80211_IFACE_COMB_BI_MIN_GCD: u32 attribute specifying the minimum GCD of
6022 * @MAX_NL80211_IFACE_COMB: highest attribute number
6038 * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate
6127 * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal)
6158 * @__NL80211_STA_WME_INVALID: invalid number for nested attribute
6164 * @NL80211_STA_WME_MAX: highest station WME attribute
6185 * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute
6287 * estimation (dynack). %NL80211_ATTR_WIPHY_DYN_ACK flag attribute is used
6364 * %NL80211_ATTR_MU_MIMO_GROUP_DATA attribute,
6366 * %NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR attribute.
6395 * %NL80211_ATTR_CQM_RSSI_THOLD attribute accepts a list of zero or more
6407 * the max channel attribute in the FILS request params IE with the
6653 * To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute.
6711 * as AP and the beaconing has already been configured. This attribute is
6876 * wiphy dumps (if requested by the application with the attribute
6962 * @__NL80211_SCHED_SCAN_PLAN_INVALID: attribute number 0 is reserved
6966 * scan plan (u32). The last scan plan must not specify this attribute
6969 * @NL80211_SCHED_SCAN_PLAN_MAX: highest scheduled scan plan attribute number
7002 * @NL80211_BSS_SELECT_ATTR_BAND_PREF: attribute indicating BSS
7006 * this attribute is according to &enum nl80211_band (u32).
7009 * RSSI-based BSS selection. The attribute value is a packed structure
7011 * @NL80211_BSS_SELECT_ATTR_MAX: highest bss select attribute number.
7087 * specified in NAN spec. This is a binary attribute.
7102 * follow up Service Discovery Frame. This is a binary attribute.
7109 * specific info. This is a binary attribute.
7110 * @NL80211_NAN_FUNC_SRF: Service Receive Filter. This is a nested attribute.
7113 * attribute. It is a list of binary values.
7115 * nested attribute. It is a list of binary values.
7122 * @NL80211_NAN_FUNC_ATTR_MAX: highest NAN function attribute
7154 * %NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary.
7159 * attribute. Each nested attribute is a MAC address.
7161 * @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute
7179 * match. This is a nested attribute.
7182 * that caused the match. This is a nested attribute.
7186 * @NL80211_NAN_MATCH_ATTR_MAX: highest NAN match attribute
7221 * @NL80211_FTM_RESP_ATTR_MAX: highest FTM responder attribute.
7238 * These attribute types are used with %NL80211_ATTR_FTM_RESPONDER_STATS
7241 * @__NL80211_FTM_STATS_INVALID: attribute number 0 is reserved
7261 * @NL80211_FTM_STATS_MAX: highest possible FTM responder stats attribute
7335 * @NL80211_PMSR_REQ_ATTR_DATA: This is a nested attribute with measurement
7339 * (flag attribute)
7342 * @NL80211_PMSR_REQ_ATTR_MAX: highest attribute number
7359 * @NL80211_PMSR_RESP_ATTR_DATA: This is a nested attribute with measurement
7378 * @NL80211_PMSR_RESP_ATTR_MAX: highest attribute number
7402 * @NL80211_PMSR_PEER_ATTR_REQ: This is a nested attribute indexed by
7405 * @NL80211_PMSR_PEER_ATTR_RESP: This is a nested attribute indexed by
7410 * @NL80211_PMSR_PEER_ATTR_MAX: highest attribute number
7429 * @NL80211_PMSR_ATTR_MAX_PEERS: u32 attribute used for capability
7432 * @NL80211_PMSR_ATTR_REPORT_AP_TSF: flag attribute in capability
7435 * @NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR: flag attribute in capability
7441 * @NL80211_PMSR_ATTR_PEERS: nested attribute, the nesting index is
7447 * @NL80211_PMSR_ATTR_MAX: highest attribute number
7467 * @NL80211_PMSR_FTM_CAPA_ATTR_ASAP: flag attribute indicating ASAP mode
7469 * @NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP: flag attribute indicating non-ASAP
7471 * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI: flag attribute indicating if LCI
7473 * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC: flag attribute indicating if civic
7475 * @NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES: u32 bitmap attribute of bits
7482 * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT: u32 attribute indicating
7485 * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST: u32 attribute indicating
7487 * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if
7489 * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating
7493 * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number
7539 * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED are
7546 * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are
7559 * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number
7663 * @NL80211_PMSR_FTM_RESP_ATTR_MAX: highest attribute number
7710 * @NL80211_HE_OBSS_PD_ATTR_MAX: highest OBSS PD attribute.
7736 * @NL80211_HE_BSS_COLOR_ATTR_MAX: highest BSS Color attribute.
7754 * @NL80211_IFTYPE_AKM_ATTR_IFTYPES: nested attribute containing a flag
7755 * attribute for each interface type that supports AKM suites specified in
7761 * @NL80211_IFTYPE_AKM_ATTR_MAX: highest interface type AKM attribute.
7788 * @NL80211_FILS_DISCOVERY_ATTR_MAX: highest attribute
7822 * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX: highest attribute
7842 * attribute is not present from userspace.
7890 * @NL80211_SAR_ATTR_MAX: highest sar attribute
7937 * @NL80211_SAR_ATTR_SPECS_MAX: highest sar specs attribute
7991 * @NL80211_MBSSID_CONFIG_ATTR_MAX: highest attribute
8030 * radio. Attribute may be present multiple times.
8032 * combination for this radio. Attribute may be present multiple times
8036 * @NL80211_WIPHY_RADIO_ATTR_MAX: Highest attribute
8061 * @NL80211_WIPHY_RADIO_FREQ_ATTR_MAX: Highest attribute