Lines Matching full:service

7  * Network Service Header:
13  * |          Service Path Identifier (SPI)        | Service Index |
49  * for service plane loop detection.  The initial TTL value SHOULD be
66  * Header, the Service Path Header, the Fixed Length Context Header or
74  * and the Service Path Header.  MD Type defines the format of the
84  * Service Path Header, but may contain optional variable length Context
95  * protocol remain unchanged due to NSH service function chaining.
115  * Service Path Identifier (SPI): Identifies a service path.
116  * Participating nodes MUST use this identifier for Service Function
120  * Service Index (SI): Provides location within the SFP.  The initial
123  * (i.e., taking into account the length of the service function path).
124  * The Service Index MUST be decremented by a value of 1 by Service
133  * The SI is used in conjunction the with Service Path Identifier for
134  * Service Function Path Selection and for determining the next SFF/SF
136  * reporting service paths.  Additionally, while the TTL field is the
137  * main mechanism for service plane loop detection, the SI can also be
138  * used for detecting service plane loops.
141  * Header (16-bytes) MUST be present immediately following the Service
147  * Service Path Header (see Figure 5).  Therefore, Length = 0x2,
148  * indicates that only the Base Header followed by the Service Path