Lines Matching +full:scl +full:- +full:output +full:- +full:only

1 /* SPDX-License-Identifier: GPL-2.0-only */
3  * i2c-gpio interface to platform code
11  * struct i2c_gpio_platform_data - Platform-dependent data for i2c-gpio
12  * @udelay: signal toggle delay. SCL frequency is (500 / udelay) kHz
14  *	SCL low for longer than this, the transfer will time out.
16  *	isn't actively driven high when setting the output value high.
18  *	pin is configured as an output.
19  * @sda_is_output_only: SDA output drivers can't be turned off.
20  *	This is for clients that can only read SDA/SCL.
21  * @sda_has_no_pullup: SDA is used in a non-compliant way and has no pull-up.
22  *	Therefore disable open-drain.
23  * @scl_is_open_drain: SCL is set up as open drain. Same requirements
25  * @scl_is_output_only: SCL output drivers cannot be turned off.
26  * @scl_has_no_pullup: SCL is used in a non-compliant way and has no pull-up.
27  *	Therefore disable open-drain.