Kconfig - OpenGrok cross reference for /linux-6.12.1/drivers/video/fbdev/Kconfig

1 # SPDX-License-Identifier: GPL-2.0-only
14 	  a well-defined interface, so the software doesn't need to know
15 	  anything about the low-level (hardware register) stuff.
21 	  On several non-X86 architectures, the frame buffer device is the
29 	  and the Framebuffer-HOWTO at
30 	  <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
40 	  are compiling a kernel for a non-x86 architecture.
46 	  device-aware may cause unexpected results. If unsure, say N.
57 	  Common utility functions useful to fbdev drivers of VGA-based
82 	  If you have a PCI-based system, this enables support for these
83 	  chips: GD-543x, GD-544x, GD-5480.
105 		Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
123 	  hardware found in Acorn RISC PCs and other ARM-based machines.  If
138 	bool "SA-1100 LCD support"
142 	  This is a framebuffer device for the SA-1100 LCD Controller.
143 	  See <http://www.linux-fbdev.org/> for information on framebuffer
146 	  If you plan to use the LCD display with your SA-1100 system, say
169 	bool "DDC for CyberPro support"
174 	  Say Y here if you want DDC support for your CyberPro graphics
175 	  card. This is only I2C bus support, driver does not use EDID.
178 	bool "CyberPro 2000/2010/5000 I2C support"
179 	depends on FB_CYBER2000 && I2C && ARCH_NETWINDER
180 	depends on I2C=y || FB_CYBER2000=m
183 	  Enable support for the I2C video decoder interface on the
252 	  is based on the KS-108 lcd controller and is typically a matrix
330 	  The IMS Twin Turbo is a PCI-based frame buffer card bundled with
334 	tristate "VGA 16-color graphics support"
395 	  graphic cards.  These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
396 	  also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
397 	  TURBOchannel cards, also known as PMAGD-A, -B and -C.
399 	  Due to hardware limitations ZLX-E2 and E3 cards are not supported
403 	  you manage to get it going. ;-)
437 	bool "EFI-based Framebuffer Support"
562 	  This is the frame buffer device driver for the SBUS-based Sun ZX
566 	bool "Sun XVR-500 3DLABS Wildcat support"
573 	  This is the framebuffer device for the Sun XVR-500 and similar
580 	bool "Sun XVR-2500 3DLABS Wildcat support"
584 	  This is the framebuffer device for the Sun XVR-2500 and similar
591 	bool "Sun XVR-1000 support"
595 	  This is the framebuffer device for the Sun XVR-1000 and similar
680 	bool "Enable DDC Support"
684 	  This enables I2C support for nVidia Chipsets.  This is used
688 	  Because fbdev-2.6 requires that drivers must be able to
727 	bool "Enable DDC Support"
731 	  This enables I2C support for nVidia Chipsets.  This is used
735 	  Because fbdev-2.6 requires that drivers must be able to
771 	  This driver supports the on-board graphics built in to the Intel 810
793 	  monitor is recommended, but can still work with non-compliant ones.
804 	bool "Enable DDC Support"
808 	  Add DDC/I2C support for i810fb.  This will allow the driver to get
866 	  "Matrox I2C support" and "G400 second head support" right below.
871 	  (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
886 	tristate "Matrox I2C support"
890 	  This drivers creates I2C buses which are needed for accessing the
891 	  DDC (I2C) bus present on all Matroxes, an I2C bus which
892 	  interconnects Matrox optional devices, like MGA-TVO on G200 and
893 	  G400, and the secondary head DDC bus, present on G400 only.
897 	  second head of G400 or MGA-TVO on G200 or G400.
900 	  i2c-matroxfb.
910 	  monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
911 	  head is not compatible with accelerated XFree 3.3.x SVGA servers -
919 	  also load i2c-matroxfb to get it to run.
923 	  <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
950 	  https://products.amd.com/en-us/GraphicCardResult.aspx
953 	bool "DDC/I2C for ATI Radeon support"
958 	  Say Y here if you want DDC/I2C support for your Radeon board.
1017 	  Say Y here to support use of ATI's 64-bit Rage boards (or other
1062 	bool "DDC for S3 support"
1067 	  Say Y here if you want DDC support for your S3 graphics card.
1092 	  This enables I2C support for S3 Savage Chipsets.  This is used
1096 	  Because fbdev-2.6 requires that drivers must be able to
1141 	depends on FB && PCI && GPIOLIB && I2C && HAS_IOPORT && (X86 || COMPILE_TEST)
1215 	  Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
1225 	This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
1229 	bool "Enable DDC/I2C support"
1234 	  Say Y here if you want DDC/I2C support for your 3dfx Voodoo3.
1374 	bool "Wondermedia WM8xxx-series frame buffer support"
1384 	  This is the framebuffer driver for WonderMedia WM8xxx-series
1408 	tristate "PMAG-AA TURBOchannel framebuffer support"
1412 	  Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1413 	  used mainly in the MIPS-based DECstation series.
1416 	tristate "PMAG-BA TURBOchannel framebuffer support"
1420 	  Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1421 	  used mainly in the MIPS-based DECstation series.
1424 	tristate "PMAGB-B TURBOchannel framebuffer support"
1428 	  Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1429 	  in the MIPS-based DECstation series. The card is currently only
1447 	  Olivetti M700-10 systems.
1454 	  Say Y here if you want to support the built-in frame buffer of
1463 	  Frame buffer driver for the built-in LCD controller in the Marvell
1473 	  Frame buffer driver for the built-in LCD controller in the Intel
1535 	  Frame buffer driver for the on-chip SH-Mobile LCD controller.
1543 	  Frame buffer driver for the built-in FB controller in the Samsung
1583 	  Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1584 	  mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
1596 	  Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1597 	  mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
1690 	  This driver implements the front-end of the Xen virtual
1691 	  frame buffer driver.  It communicates with a back-end
1695 	tristate "E-Ink Metronome/8track controller support"
1699 	  This driver implements support for the E-Ink Metronome
1700 	  controller. The pre-release name for this device was 8track
1701 	  and could also have been called by some vendors as PVI-nnnn.
1709 	  Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
1716 	bool "Carmine/Coral-P(A) GDC"
1719 	  This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
1728 	  Framebuffer support for Fujitsu Lime GDC on host CPU bus.
1733 	bool "Support I2C bus on MB862XX GDC"
1734 	depends on FB_MB862XX && I2C
1735 	depends on FB_MB862XX=m || I2C=y
1738 	  Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
1739 	  driver to support accessing I2C devices on controller's I2C bus.
1749 	  ep93xx-fb.
1759 	tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
1763 	  This driver implements support for the E-Ink Broadsheet
1769 	tristate "Microsoft Hyper-V Synthetic Video support"
1774 	  This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
1783 	  Say Y if you want support for a simple frame-buffer.
1787 	  pre-allocated frame buffer surface.
1794 	depends on FB && I2C
1800 	  OLED controller over I2C.