Lines Matching +full:custom +full:- +full:output +full:- +full:range +full:- +full:config
1 # SPDX-License-Identifier: GPL-2.0-only
14 a well-defined interface, so the software doesn't need to know
15 anything about the low-level (hardware register) stuff.
21 On several non-X86 architectures, the frame buffer device is the
29 and the Framebuffer-HOWTO at
30 <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
40 are compiling a kernel for a non-x86 architecture.
46 device-aware may cause unexpected results. If unsure, say N.
48 config FB_HECUBA
53 config FB_SVGALIB
57 Common utility functions useful to fbdev drivers of VGA-based
60 config FB_MACMODES
64 config FB_GRVGA
71 config FB_CIRRUS
82 If you have a PCI-based system, this enables support for these
83 chips: GD-543x, GD-544x, GD-5480.
90 config FB_PM2
105 Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
111 config FB_PM2_FIFO_DISCONNECT
117 config FB_ACORN
123 hardware found in Acorn RISC PCs and other ARM-based machines. If
126 config FB_CLPS711X
137 config FB_SA1100
138 bool "SA-1100 LCD support"
142 This is a framebuffer device for the SA-1100 LCD Controller.
143 See <http://www.linux-fbdev.org/> for information on framebuffer
146 If you plan to use the LCD display with your SA-1100 system, say
149 config FB_IMX
158 config FB_CYBER2000
168 config FB_CYBER2000_DDC
177 config FB_CYBER2000_I2C
187 config FB_APOLLO
195 config FB_Q40
201 config FB_AMIGA
212 config FB_AMIGA_OCS
220 config FB_AMIGA_ECS
229 config FB_AMIGA_AGA
238 config FB_FM2
246 config FB_ARC
252 is based on the KS-108 lcd controller and is typically a matrix
259 config FB_ATARI
270 config FB_OF
281 config FB_CONTROL
290 config FB_PLATINUM
299 config FB_VALKYRIE
308 config FB_CT65550
316 config FB_ASILIANT
323 config FB_IMSTT
330 The IMS Twin Turbo is a PCI-based frame buffer card bundled with
333 config FB_VGA16
334 tristate "VGA 16-color graphics support"
350 config FB_STI
370 config FB_MAC
376 config FB_HP300
383 config FB_TGA
395 graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
396 also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
397 TURBOchannel cards, also known as PMAGD-A, -B and -C.
399 Due to hardware limitations ZLX-E2 and E3 cards are not supported
403 you manage to get it going. ;-)
407 config FB_UVESA
424 config FB_VESA
436 config FB_EFI
437 bool "EFI-based Framebuffer Support"
448 config FB_N411
456 config FB_HGA
469 config FB_GBE
478 config FB_GBE_MEM
486 config FB_SBUS
492 config FB_SBUS_HELPERS
499 config FB_BW2
506 config FB_CG3
513 config FB_CG6
523 config FB_FFB
533 config FB_TCX
541 config FB_CG14
549 config FB_P9100
557 config FB_LEO
562 This is the frame buffer device driver for the SBUS-based Sun ZX
565 config FB_XVR500
566 bool "Sun XVR-500 3DLABS Wildcat support"
573 This is the framebuffer device for the Sun XVR-500 and similar
579 config FB_XVR2500
580 bool "Sun XVR-2500 3DLABS Wildcat support"
584 This is the framebuffer device for the Sun XVR-2500 and similar
590 config FB_XVR1000
591 bool "Sun XVR-1000 support"
595 This is the framebuffer device for the Sun XVR-1000 and similar
600 config FB_PVR2
623 config FB_OPENCORES
637 config FB_S1D13XXX
649 config FB_ATMEL
660 config FB_NVIDIA
679 config FB_NVIDIA_I2C
688 Because fbdev-2.6 requires that drivers must be able to
692 config FB_NVIDIA_DEBUG
693 bool "Lots of debug output"
696 Say Y here if you want the nVidia driver to output all sorts
700 config FB_NVIDIA_BACKLIGHT
707 config FB_RIVA
726 config FB_RIVA_I2C
735 Because fbdev-2.6 requires that drivers must be able to
739 config FB_RIVA_DEBUG
740 bool "Lots of debug output"
743 Say Y here if you want the Riva driver to output all sorts
747 config FB_RIVA_BACKLIGHT
754 config FB_I740
764 config FB_I810
771 This driver supports the on-board graphics built in to the Intel 810
780 config FB_I810_GTF
787 (nondiscrete being a range of values as opposed to discrete being a
793 monitor is recommended, but can still work with non-compliant ones.
803 config FB_I810_I2C
813 config FB_MATROX
835 config FB_MATROX_MILLENIUM
845 config FB_MATROX_MYSTIQUE
855 config FB_MATROX_G
867 G450/G550 secondary head and digital output are supported without
871 (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
872 swap primary and secondary head outputs, or to change output mode.
885 config FB_MATROX_I2C
892 interconnects Matrox optional devices, like MGA-TVO on G200 and
897 second head of G400 or MGA-TVO on G200 or G400.
900 i2c-matroxfb.
902 config FB_MATROX_MAVEN
910 monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
911 head is not compatible with accelerated XFree 3.3.x SVGA servers -
912 secondary head output is blanked while you are in X. With XFree
919 also load i2c-matroxfb to get it to run.
923 <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
934 config FB_RADEON
950 https://products.amd.com/en-us/GraphicCardResult.aspx
952 config FB_RADEON_I2C
960 config FB_RADEON_BACKLIGHT
967 config FB_RADEON_DEBUG
968 bool "Lots of debug output from Radeon driver"
971 Say Y here if you want the Radeon driver to output all sorts
975 config FB_ATY128
989 config FB_ATY128_BACKLIGHT
996 config FB_ATY
1013 config FB_ATY_CT
1017 Say Y here to support use of ATI's 64-bit Rage boards (or other
1022 config FB_ATY_GENERIC_LCD
1029 config FB_ATY_GX
1040 config FB_ATY_BACKLIGHT
1047 config FB_S3
1061 config FB_S3_DDC
1069 config FB_SAVAGE
1087 config FB_SAVAGE_I2C
1096 Because fbdev-2.6 requires that drivers must be able to
1100 config FB_SAVAGE_ACCEL
1108 config FB_SIS
1125 config FB_SIS_300
1131 config FB_SIS_315
1139 config FB_VIA
1159 config FB_VIA_DIRECT_PROCFS
1162 Allow direct hardware access to some output registers via procfs.
1164 correct output device configuration.
1167 config FB_VIA_X_COMPATIBILITY
1178 config FB_NEOMAGIC
1194 config FB_KYRO
1205 config FB_3DFX
1215 Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
1221 config FB_3DFX_ACCEL
1225 This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
1228 config FB_3DFX_I2C
1236 config FB_VOODOO1
1252 config FB_VT8623
1267 config FB_TRIDENT
1290 config FB_ARK
1305 config FB_PM3
1318 config FB_CARMINE
1331 config FB_CARMINE_DRAM_EVAL
1336 config CARMINE_DRAM_CUSTOM
1337 bool "Custom board timings"
1339 Use custom board timings.
1342 config FB_AU1100
1351 config FB_AU1200
1360 config FB_VT8500
1373 config FB_WM8505
1374 bool "Wondermedia WM8xxx-series frame buffer support"
1384 This is the framebuffer driver for WonderMedia WM8xxx-series
1388 config FB_WMT_GE_ROPS
1397 config FB_HIT
1407 config FB_PMAG_AA
1408 tristate "PMAG-AA TURBOchannel framebuffer support"
1412 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1413 used mainly in the MIPS-based DECstation series.
1415 config FB_PMAG_BA
1416 tristate "PMAG-BA TURBOchannel framebuffer support"
1420 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1421 used mainly in the MIPS-based DECstation series.
1423 config FB_PMAGB_B
1424 tristate "PMAGB-B TURBOchannel framebuffer support"
1428 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1429 in the MIPS-based DECstation series. The card is currently only
1432 config FB_MAXINE
1441 config FB_G364
1447 Olivetti M700-10 systems.
1449 config FB_68328
1454 Say Y here if you want to support the built-in frame buffer of
1457 config FB_PXA168
1463 Frame buffer driver for the built-in LCD controller in the Marvell
1466 config FB_PXA
1473 Frame buffer driver for the built-in LCD controller in the Intel
1483 config FB_PXA_OVERLAY
1487 config FB_PXA_SMARTPANEL
1491 config FB_PXA_PARAMETERS
1507 config PXA3XX_GCU
1517 config FB_FSL_DIU
1526 config FB_SH_MOBILE_LCDC
1535 Frame buffer driver for the on-chip SH-Mobile LCD controller.
1537 config FB_S3C
1543 Frame buffer driver for the built-in FB controller in the Samsung
1552 config FB_S3C_DEBUG_REGWRITE
1558 config FB_SM501
1576 config FB_SMSCUFX
1583 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1584 mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
1588 config FB_UDL
1596 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1597 mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
1600 config FB_IBM_GXT4500
1611 config FB_PS3
1618 config FB_PS3_DEFAULT_SIZE_M
1628 config FB_XILINX
1637 config FB_GOLDFISH
1645 config FB_COBALT
1650 config FB_SH7760
1663 config FB_VIRTUAL
1670 board. This means you cannot see any output sent to this frame
1683 config XEN_FBDEV_FRONTEND
1690 This driver implements the front-end of the Xen virtual
1691 frame buffer driver. It communicates with a back-end
1694 config FB_METRONOME
1695 tristate "E-Ink Metronome/8track controller support"
1699 This driver implements support for the E-Ink Metronome
1700 controller. The pre-release name for this device was 8track
1701 and could also have been called by some vendors as PVI-nnnn.
1703 config FB_MB862XX
1709 Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
1715 config FB_MB862XX_PCI_GDC
1716 bool "Carmine/Coral-P(A) GDC"
1719 This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
1722 config FB_MB862XX_LIME
1732 config FB_MB862XX_I2C
1738 Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
1742 config FB_EP93XX
1749 ep93xx-fb.
1751 config FB_PRE_INIT_FB
1758 config FB_BROADSHEET
1759 tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
1763 This driver implements support for the E-Ink Broadsheet
1768 config FB_HYPERV
1769 tristate "Microsoft Hyper-V Synthetic Video support"
1774 This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
1776 config FB_SIMPLE
1783 Say Y if you want support for a simple frame-buffer.
1787 pre-allocated frame buffer surface.
1792 config FB_SSD1307
1802 config FB_SM712