Lines Matching +full:pci +full:- +full:based
1 # SPDX-License-Identifier: GPL-2.0-only
14 a well-defined interface, so the software doesn't need to know
15 anything about the low-level (hardware register) stuff.
21 On several non-X86 architectures, the frame buffer device is the
29 and the Framebuffer-HOWTO at
30 <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
40 are compiling a kernel for a non-x86 architecture.
46 device-aware may cause unexpected results. If unsure, say N.
57 Common utility functions useful to fbdev drivers of VGA-based
73 depends on FB && (ZORRO || PCI)
79 This enables support for Cirrus Logic GD542x/543x based boards on
82 If you have a PCI-based system, this enables support for these
83 chips: GD-543x, GD-544x, GD-5480.
92 depends on FB && ((AMIGA && BROKEN) || PCI)
98 This is the frame buffer device driver for cards based on
102 ELSA Gloria Synergy PCI
103 Appian Jeronimo PRO (both heads) PCI
104 3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI
105 Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
113 depends on FB_PM2 && PCI
123 hardware found in Acorn RISC PCs and other ARM-based machines. If
138 bool "SA-1100 LCD support"
142 This is a framebuffer device for the SA-1100 LCD Controller.
143 See <http://www.linux-fbdev.org/> for information on framebuffer
146 If you plan to use the LCD display with your SA-1100 system, say
160 depends on FB && PCI && HAS_IOPORT && (BROKEN || !SPARC64)
252 is based on the KS-108 lcd controller and is typically a matrix
272 depends on FB && PPC && (!PPC_PSERIES || PCI)
310 depends on (FB = y) && PPC32 && PCI
318 depends on (FB = y) && PCI
325 depends on (FB = y) && PCI
330 The IMS Twin Turbo is a PCI-based frame buffer card bundled with
334 tristate "VGA 16-color graphics support"
386 depends on PCI || TC
395 graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
396 also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
397 TURBOchannel cards, also known as PMAGD-A, -B and -C.
399 Due to hardware limitations ZLX-E2 and E3 cards are not supported
403 you manage to get it going. ;-)
437 bool "EFI-based Framebuffer Support"
490 Say Y if you want support for SBUS or UPA based frame buffer device.
562 This is the frame buffer device driver for the SBUS-based Sun ZX
566 bool "Sun XVR-500 3DLABS Wildcat support"
567 depends on (FB = y) && PCI && SPARC64
573 This is the framebuffer device for the Sun XVR-500 and similar
574 graphics cards based upon the 3DLABS Wildcat chipset. The driver
580 bool "Sun XVR-2500 3DLABS Wildcat support"
581 depends on (FB = y) && PCI && SPARC64
584 This is the framebuffer device for the Sun XVR-2500 and similar
585 graphics cards based upon the 3DLABS Wildcat chipset. The driver
591 bool "Sun XVR-1000 support"
595 This is the framebuffer device for the Sun XVR-1000 and similar
662 depends on FB && PCI
688 Because fbdev-2.6 requires that drivers must be able to
709 depends on FB && PCI
735 Because fbdev-2.6 requires that drivers must be able to
756 depends on FB && PCI
762 This driver supports graphics cards based on Intel740 chip.
766 depends on FB && PCI && X86_32 && AGP_INTEL
771 This driver supports the on-board graphics built in to the Intel 810
793 monitor is recommended, but can still work with non-compliant ones.
815 depends on FB && PCI
859 Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
871 (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
892 interconnects Matrox optional devices, like MGA-TVO on G200 and
897 second head of G400 or MGA-TVO on G200 or G400.
900 i2c-matroxfb.
910 monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
911 head is not compatible with accelerated XFree 3.3.x SVGA servers -
919 also load i2c-matroxfb to get it to run.
923 <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
936 depends on FB && PCI
946 a framebuffer device. There are both PCI and AGP versions. You
950 https://products.amd.com/en-us/GraphicCardResult.aspx
977 depends on FB && PCI
997 tristate "ATI Mach64 display support" if PCI || ATARI
1005 select FB_ATY_CT if SPARC64 && PCI
1015 depends on PCI && FB_ATY
1017 Say Y here to support use of ATI's 64-bit Rage boards (or other
1018 boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
1030 bool "Mach64 GX support" if PCI
1035 board (or other boards based on the Mach64 GX chipset) as a
1049 depends on FB && PCI && HAS_IOPORT
1071 depends on FB && PCI
1079 This driver supports notebooks and computers with S3 Savage PCI/AGP
1096 Because fbdev-2.6 requires that drivers must be able to
1110 depends on FB && PCI && HAS_IOPORT
1141 depends on FB && PCI && GPIOLIB && I2C && HAS_IOPORT && (X86 || COMPILE_TEST)
1180 depends on FB && PCI && HAS_IOPORT
1188 This driver supports notebooks with NeoMagic PCI chips.
1196 depends on FB && PCI
1199 Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
1207 depends on FB && PCI && HAS_IOPORT
1215 Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
1225 This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
1238 depends on FB && PCI
1242 Voodoo2 (cvg) based graphics card.
1254 depends on FB && PCI && HAS_IOPORT
1269 depends on FB && PCI && HAS_IOPORT
1277 This is the frame buffer device driver for Trident PCI/AGP chipsets.
1292 depends on FB && PCI && HAS_IOPORT
1302 Driver for PCI graphics boards with ARK 2000PV chip
1307 depends on FB && PCI
1320 depends on FB && PCI
1374 bool "Wondermedia WM8xxx-series frame buffer support"
1384 This is the framebuffer driver for WonderMedia WM8xxx-series
1408 tristate "PMAG-AA TURBOchannel framebuffer support"
1412 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1413 used mainly in the MIPS-based DECstation series.
1416 tristate "PMAG-BA TURBOchannel framebuffer support"
1420 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1421 used mainly in the MIPS-based DECstation series.
1424 tristate "PMAGB-B TURBOchannel framebuffer support"
1428 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1429 in the MIPS-based DECstation series. The card is currently only
1447 Olivetti M700-10 systems.
1454 Say Y here if you want to support the built-in frame buffer of
1463 Frame buffer driver for the built-in LCD controller in the Marvell
1473 Frame buffer driver for the built-in LCD controller in the Intel
1535 Frame buffer driver for the on-chip SH-Mobile LCD controller.
1543 Frame buffer driver for the built-in FB controller in the Samsung
1583 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1584 mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
1596 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1597 mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
1606 GXT4500P/6500P display adaptor based on Raster Engine RC1000,
1690 This driver implements the front-end of the Xen virtual
1691 frame buffer driver. It communicates with a back-end
1695 tristate "E-Ink Metronome/8track controller support"
1699 This driver implements support for the E-Ink Metronome
1700 controller. The pre-release name for this device was 8track
1701 and could also have been called by some vendors as PVI-nnnn.
1706 depends on PCI || (OF && PPC)
1709 Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
1716 bool "Carmine/Coral-P(A) GDC"
1717 depends on PCI
1719 This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
1720 PCI graphics controller devices.
1738 Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
1749 ep93xx-fb.
1759 tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
1763 This driver implements support for the E-Ink Broadsheet
1769 tristate "Microsoft Hyper-V Synthetic Video support"
1774 This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
1783 Say Y if you want support for a simple frame-buffer.
1787 pre-allocated frame buffer surface.
1804 depends on FB && PCI && HAS_IOPORT