Lines Matching +full:lcd +full:- +full:rst
1 # SPDX-License-Identifier: GPL-2.0-only
14 a well-defined interface, so the software doesn't need to know
15 anything about the low-level (hardware register) stuff.
21 On several non-X86 architectures, the frame buffer device is the
28 buffer devices. Please read <file:Documentation/fb/framebuffer.rst>
29 and the Framebuffer-HOWTO at
30 <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
40 are compiling a kernel for a non-x86 architecture.
46 device-aware may cause unexpected results. If unsure, say N.
57 Common utility functions useful to fbdev drivers of VGA-based
82 If you have a PCI-based system, this enables support for these
83 chips: GD-543x, GD-544x, GD-5480.
85 Please read the file <file:Documentation/fb/cirrusfb.rst>.
105 Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
123 hardware found in Acorn RISC PCs and other ARM-based machines. If
127 tristate "CLPS711X LCD support"
138 bool "SA-1100 LCD support"
142 This is a framebuffer device for the SA-1100 LCD Controller.
143 See <http://www.linux-fbdev.org/> for information on framebuffer
146 If you plan to use the LCD display with your SA-1100 system, say
150 tristate "Freescale i.MX1/21/25/27 LCD support"
247 tristate "Arc Monochrome LCD board support"
251 This enables support for the Arc Monochrome LCD board. The board
252 is based on the KS-108 lcd controller and is typically a matrix
330 The IMS Twin Turbo is a PCI-based frame buffer card bundled with
334 tristate "VGA 16-color graphics support"
395 graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
396 also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
397 TURBOchannel cards, also known as PMAGD-A, -B and -C.
399 Due to hardware limitations ZLX-E2 and E3 cards are not supported
403 you manage to get it going. ;-)
420 <file:Documentation/fb/uvesafb.rst> for more information.
434 read <file:Documentation/fb/vesafb.rst>. If unsure, say Y.
437 bool "EFI-based Framebuffer Support"
562 This is the frame buffer device driver for the SBUS-based Sun ZX
566 bool "Sun XVR-500 3DLABS Wildcat support"
573 This is the framebuffer device for the Sun XVR-500 and similar
580 bool "Sun XVR-2500 3DLABS Wildcat support"
584 This is the framebuffer device for the Sun XVR-2500 and similar
591 bool "Sun XVR-1000 support"
595 This is the framebuffer device for the Sun XVR-1000 and similar
621 <file:Documentation/fb/pvr2fb.rst>.
624 tristate "OpenCores VGA/LCD core 2.0 framebuffer support"
628 This enables support for the OpenCores VGA/LCD core.
630 The OpenCores VGA/LCD core is typically used together with
650 tristate "AT91 LCD Controller support"
658 This enables support for the AT91 LCD Controller.
688 Because fbdev-2.6 requires that drivers must be able to
735 Because fbdev-2.6 requires that drivers must be able to
771 This driver supports the on-board graphics built in to the Intel 810
778 <file:Documentation/fb/intel810.rst>
793 monitor is recommended, but can still work with non-compliant ones.
833 are described in <file:Documentation/fb/matroxfb.rst>.
871 (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
892 interconnects Matrox optional devices, like MGA-TVO on G200 and
897 second head of G400 or MGA-TVO on G200 or G400.
900 i2c-matroxfb.
910 monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
911 head is not compatible with accelerated XFree 3.3.x SVGA servers -
919 also load i2c-matroxfb to get it to run.
923 <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
950 https://products.amd.com/en-us/GraphicCardResult.aspx
984 <file:Documentation/fb/aty128fb.rst>.
1017 Say Y here to support use of ATI's 64-bit Rage boards (or other
1023 bool "Mach64 generic LCD support"
1096 Because fbdev-2.6 requires that drivers must be able to
1215 Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
1225 This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
1249 Please read the <file:Documentation/fb/sstfb.rst> for supported
1283 For more information, read <file:Documentation/fb/tridentfb.rst>
1343 bool "Au1100 LCD Driver"
1352 bool "Au1200/Au1300 LCD Driver"
1370 This is the framebuffer driver for VIA VT8500 integrated LCD
1374 bool "Wondermedia WM8xxx-series frame buffer support"
1384 This is the framebuffer driver for WonderMedia WM8xxx-series
1385 integrated LCD controller. This driver covers the WM8505, WM8650
1404 This is the frame buffer device driver for the Hitachi HD64461 LCD
1408 tristate "PMAG-AA TURBOchannel framebuffer support"
1412 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1413 used mainly in the MIPS-based DECstation series.
1416 tristate "PMAG-BA TURBOchannel framebuffer support"
1420 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1421 used mainly in the MIPS-based DECstation series.
1424 tristate "PMAGB-B TURBOchannel framebuffer support"
1428 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1429 in the MIPS-based DECstation series. The card is currently only
1447 Olivetti M700-10 systems.
1454 Say Y here if you want to support the built-in frame buffer of
1458 tristate "PXA168/910 LCD framebuffer support"
1463 Frame buffer driver for the built-in LCD controller in the Marvell
1467 tristate "PXA LCD framebuffer support"
1473 Frame buffer driver for the built-in LCD controller in the Intel
1479 say M here and read <file:Documentation/kbuild/modules.rst>.
1488 bool "PXA Smartpanel LCD support"
1492 bool "PXA LCD command line parameters"
1496 to configure the physical properties of the LCD panel when
1497 using the PXA LCD driver.
1505 <file:Documentation/fb/pxafb.rst> describes the available parameters.
1535 Frame buffer driver for the on-chip SH-Mobile LCD controller.
1543 Frame buffer driver for the built-in FB controller in the Samsung
1566 Frame buffer driver for the CRT and LCD controllers in the Silicon
1572 say M here and read <file:Documentation/kbuild/modules.rst>.
1583 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1584 mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
1596 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1597 mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
1634 framebuffer. ML300 carries a 640*480 LCD display on the board,
1646 tristate "Cobalt server LCD frame buffer support"
1657 (D)STN/TFT LCD Controller.
1690 This driver implements the front-end of the Xen virtual
1691 frame buffer driver. It communicates with a back-end
1695 tristate "E-Ink Metronome/8track controller support"
1699 This driver implements support for the E-Ink Metronome
1700 controller. The pre-release name for this device was 8track
1701 and could also have been called by some vendors as PVI-nnnn.
1709 Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
1716 bool "Carmine/Coral-P(A) GDC"
1719 This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
1738 Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
1749 ep93xx-fb.
1759 tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
1763 This driver implements support for the E-Ink Broadsheet
1769 tristate "Microsoft Hyper-V Synthetic Video support"
1774 This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
1783 Say Y if you want support for a simple frame-buffer.
1787 pre-allocated frame buffer surface.
1812 here and read <file:Documentation/kbuild/modules.rst>.