Lines Matching +full:e +full:- +full:ddc
1 # SPDX-License-Identifier: GPL-2.0-only
14 a well-defined interface, so the software doesn't need to know
15 anything about the low-level (hardware register) stuff.
21 On several non-X86 architectures, the frame buffer device is the
25 in the /dev directory, i.e. /dev/fb*.
29 and the Framebuffer-HOWTO at
30 <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
40 are compiling a kernel for a non-x86 architecture.
45 (e.g. an accelerated X server) and that are not frame buffer
46 device-aware may cause unexpected results. If unsure, say N.
57 Common utility functions useful to fbdev drivers of VGA-based
82 If you have a PCI-based system, this enables support for these
83 chips: GD-543x, GD-544x, GD-5480.
105 Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
123 hardware found in Acorn RISC PCs and other ARM-based machines. If
138 bool "SA-1100 LCD support"
142 This is a framebuffer device for the SA-1100 LCD Controller.
143 See <http://www.linux-fbdev.org/> for information on framebuffer
146 If you plan to use the LCD display with your SA-1100 system, say
169 bool "DDC for CyberPro support"
174 Say Y here if you want DDC support for your CyberPro graphics
252 is based on the KS-108 lcd controller and is typically a matrix
330 The IMS Twin Turbo is a PCI-based frame buffer card bundled with
334 tristate "VGA 16-color graphics support"
395 graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
396 also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
397 TURBOchannel cards, also known as PMAGD-A, -B and -C.
399 Due to hardware limitations ZLX-E2 and E3 cards are not supported
403 you manage to get it going. ;-)
437 bool "EFI-based Framebuffer Support"
562 This is the frame buffer device driver for the SBUS-based Sun ZX
566 bool "Sun XVR-500 3DLABS Wildcat support"
573 This is the framebuffer device for the Sun XVR-500 and similar
580 bool "Sun XVR-2500 3DLABS Wildcat support"
584 This is the framebuffer device for the Sun XVR-2500 and similar
591 bool "Sun XVR-1000 support"
595 This is the framebuffer device for the Sun XVR-1000 and similar
631 softcore CPUs (e.g. OpenRISC or Microblaze) or hard processor
632 systems (e.g. Altera socfpga or Xilinx Zynq) on FPGAs.
680 bool "Enable DDC Support"
688 Because fbdev-2.6 requires that drivers must be able to
727 bool "Enable DDC Support"
735 Because fbdev-2.6 requires that drivers must be able to
771 This driver supports the on-board graphics built in to the Intel 810
793 monitor is recommended, but can still work with non-compliant ones.
804 bool "Enable DDC Support"
808 Add DDC/I2C support for i810fb. This will allow the driver to get
871 (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
891 DDC (I2C) bus present on all Matroxes, an I2C bus which
892 interconnects Matrox optional devices, like MGA-TVO on G200 and
893 G400, and the secondary head DDC bus, present on G400 only.
897 second head of G400 or MGA-TVO on G200 or G400.
900 i2c-matroxfb.
910 monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
911 head is not compatible with accelerated XFree 3.3.x SVGA servers -
919 also load i2c-matroxfb to get it to run.
923 <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
950 https://products.amd.com/en-us/GraphicCardResult.aspx
953 bool "DDC/I2C for ATI Radeon support"
958 Say Y here if you want DDC/I2C support for your Radeon board.
1017 Say Y here to support use of ATI's 64-bit Rage boards (or other
1062 bool "DDC for S3 support"
1067 Say Y here if you want DDC support for your S3 graphics card.
1096 Because fbdev-2.6 requires that drivers must be able to
1215 Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
1225 This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
1229 bool "Enable DDC/I2C support"
1234 Say Y here if you want DDC/I2C support for your 3dfx Voodoo3.
1374 bool "Wondermedia WM8xxx-series frame buffer support"
1384 This is the framebuffer driver for WonderMedia WM8xxx-series
1408 tristate "PMAG-AA TURBOchannel framebuffer support"
1412 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1413 used mainly in the MIPS-based DECstation series.
1416 tristate "PMAG-BA TURBOchannel framebuffer support"
1420 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1421 used mainly in the MIPS-based DECstation series.
1424 tristate "PMAGB-B TURBOchannel framebuffer support"
1428 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1429 in the MIPS-based DECstation series. The card is currently only
1447 Olivetti M700-10 systems.
1454 Say Y here if you want to support the built-in frame buffer of
1463 Frame buffer driver for the built-in LCD controller in the Marvell
1473 Frame buffer driver for the built-in LCD controller in the Intel
1535 Frame buffer driver for the on-chip SH-Mobile LCD controller.
1543 Frame buffer driver for the built-in FB controller in the Samsung
1583 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1584 mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
1596 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1597 mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
1626 using the "ps3fb" option (e.g. "ps3fb=9M");
1690 This driver implements the front-end of the Xen virtual
1691 frame buffer driver. It communicates with a back-end
1695 tristate "E-Ink Metronome/8track controller support"
1699 This driver implements support for the E-Ink Metronome
1700 controller. The pre-release name for this device was 8track
1701 and could also have been called by some vendors as PVI-nnnn.
1709 Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
1716 bool "Carmine/Coral-P(A) GDC"
1719 This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
1738 Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
1749 ep93xx-fb.
1759 tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
1763 This driver implements support for the E-Ink Broadsheet
1769 tristate "Microsoft Hyper-V Synthetic Video support"
1774 This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
1783 Say Y if you want support for a simple frame-buffer.
1787 pre-allocated frame buffer surface.