Lines Matching +full:6 +full:gbps

25 	0x00050034, /* USB 3.0 SS Gen1x1 id:4 symmetric rx 5Gbps */
26 	0x000500b4, /* USB 3.0 SS Gen1x1 id:4 symmetric tx 5Gbps */
27 	0x000a4035, /* USB 3.1 SSP Gen2x1 id:5 symmetric rx 10Gbps */
28 	0x000a40b5, /* USB 3.1 SSP Gen2x1 id:5 symmetric tx 10Gbps */
29 	0x00054036, /* USB 3.2 SSP Gen1x2 id:6 symmetric rx 5Gbps */
30 	0x000540b6, /* USB 3.2 SSP Gen1x2 id:6 symmetric tx 5Gbps */
31 	0x000a4037, /* USB 3.2 SSP Gen2x2 id:7 symmetric rx 10Gbps */
32 	0x000a40b7, /* USB 3.2 SSP Gen2x2 id:7 symmetric tx 10Gbps */
169 		/* Shift to Gbps and set SSP Link Protocol if 10Gpbs */  in xhci_create_usb3x_bos_desc()
186 		 * is 20Gbps, but the BOS descriptor lane speed mantissa is  in xhci_create_usb3x_bos_desc()
187 		 * 10Gbps. Check and modify the mantissa value to match the  in xhci_create_usb3x_bos_desc()
193 			 * values. But the lane speed for gen1x2 is 5Gbps while  in xhci_create_usb3x_bos_desc()
194 			 * gen2x1 is 10Gbps. If the previous PSI dword SSID is  in xhci_create_usb3x_bos_desc()
195 			 * 5 and the PSIE and PSIM match with SSID 6, let's  in xhci_create_usb3x_bos_desc()
197 			 * id with SSID 6 for gen1x2.  in xhci_create_usb3x_bos_desc()
199 			if (ssid == 6 && psie == 3 && psim == 10 && i) {  in xhci_create_usb3x_bos_desc()
272 	/* Bits 6:5 - no TTs in root ports */  in xhci_common_hub_descriptor()
1530 			/* 4.19.6 Port Test Modes (USB2 Test Mode) */  in xhci_hub_control()