Kconfig - OpenGrok cross reference for /linux-6.12.1/drivers/usb/host/Kconfig

3 # USB Host Controller Drivers
5 comment "USB Host Controller Drivers"
14 	  Enable this option to support this chip in host controller mode.
24 	  The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
25 	  "SuperSpeed" host controller hardware.
46 	tristate "Support for additional Renesas xHCI controller with firmware"
49 	  Say 'Y' to enable the support for the Renesas xHCI controller with
68 	  Say 'Y' to enable the support for the xHCI host controller
76 	  Say 'Y' to enable the support for the xHCI host controller
86 	  Say 'Y' to enable the support for the xHCI host controller
95 	  Say 'Y' to enable the support for the xHCI host controller
104 	  Say 'Y' to enable the support for the xHCI host controller
113 	  Say 'Y' to enable the support for the xHCI host controller
142 	  The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
143 	  "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
144 	  If your USB host controller supports USB 2.0, you will likely want to
145 	  configure this Host Controller Driver.
150 	  connect to a companion controller.  If you configure EHCI, you should
152 	  Controller Driver or UHCI (for Via motherboards) Host Controller
166 	  controller is needed.  It's safe to say "y" even if your
167 	  controller doesn't support this feature.
185 	  Controller, and some of those devices will not work correctly
200 	bool "Use Xilinx usb host EHCI controller core"
205 		Xilinx xps USB host controller core is EHCI compliant and has
211 	tristate "Support for Freescale on-chip EHCI USB controller"
217 	tristate "Support for Nuvoton NPCM on-chip EHCI USB controller"
221 	  Enables support for the on-chip EHCI controller on
230 	  Enables support for the on-chip EHCI controller on
234 	tristate  "Support for Marvell EBU on-chip EHCI USB controller"
238 	  Enables support for the on-chip EHCI controller on Marvell's
242 	  Marvell PXA/MMP USB controller" for those.
245 	tristate "Support for ST SPEAr on-chip EHCI USB controller"
249 	  Enables support for the on-chip EHCI controller on
253 	tristate "Support for ST STiHxxx on-chip EHCI USB controller"
258 	  Enable support for the on-chip EHCI controller found on
262 	tristate  "Support for Atmel on-chip EHCI USB controller"
266 	  Enables support for the on-chip EHCI controller on
284 	bool "EHCI support for PPC USB controller on OF platform bus"
288 	  Enables support for the USB controller present on the PowerPC
292 	bool "EHCI support for SuperH USB controller"
295 	  Enables support for the on-chip EHCI controller on the SuperH.
296 	  If you use the PCI EHCI controller, this option is not necessary.
303 	  controller.
306 	tristate "EHCI support for Marvell PXA/MMP USB controller"
311 	  USB SPH and OTG controller. SPH is a single port host, and it can
312 	  only be EHCI host. OTG is controller that can switch to host mode.
314 	  controller used by the EBU-type SoCs including Orion, Kirkwood,
316 	  on-chip EHCI USB controller" for those.
322 	  This driver supports USB host controller on some Cavium
346 	  controller.  It is needed for high-speed (480Mbit/sec)
356 	  The OXU210HP is an USB host/OTG/device controller. Enable this
382 	  Supports the Philips ISP1362 chip as a host controller
404 	  The Open Host Controller Interface (OHCI) is a standard for accessing
405 	  USB 1.1 host controller hardware.  It does more in hardware than Intel's
406 	  UHCI specification.  If your USB host controller follows the OHCI spec,
408 	  USB controller from Intel or VIA, this is appropriate.  If your host
409 	  controller doesn't use PCI, this is probably appropriate.  For a PCI
411 	  right "prog-if" for your USB controller(s):  EHCI, OHCI, or UHCI.
423 	  Enables support for the OHCI controller on OMAP1/2 chips.
426 	tristate "Support for ST SPEAr on-chip OHCI USB controller"
430 	  Enables support for the on-chip OHCI controller on
434 	tristate "Support for ST STiHxxx on-chip OHCI USB controller"
439 	  Enable support for the on-chip OHCI controller found on
447 	  Enables support for the on-chip OHCI controller on
451 	tristate "Support for LPC on-chip OHCI USB controller"
457 	  Enables support for the on-chip OHCI controller on
461 	tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
465 	  Enables support for the on-chip OHCI controller on
469 	tristate "Support for Atmel on-chip OHCI USB controller"
473 	  Enables support for the on-chip OHCI controller on
485 	  Enables support for the on-chip OHCI controller on
496 	  controller. This driver cannot currently be a loadable
527 	  Enables support for PCI-bus plug-in USB controller cards.
552 	  controller.
574 	  controller.  It is needed for low-speed USB 1.0 device
583 	  The Universal Host Controller Interface is a standard by Intel for
585 	  host controller). If your USB host controller conforms to this
590 	  133) and LEON/GRLIB SoCs with the GRUSBHC controller.
609 	tristate "Freescale QE USB Host Controller support"
614 	  This driver enables support for Freescale QE USB Host Controller
619 	bool "Freescale QE USB Host Controller debug support"
629 	  The SL811HS is a single-port USB controller that supports either
631 	  board has this chip, and you want to use it as a host controller.
661 	  The R8A66597 is a USB 2.0 host and peripheral controller.
664 	  to use it as a host controller.  If unsure, say N.
673 	  The Renesas USBHS is a USB 2.0 host and peripheral controller.
676 	  to use it as a host controller.  If unsure, say N.
687 	  Enable support for the EHCI and OCHI host controller on an bcma bus.
699 	  Enable support for the EHCI and OCHI host controller on an bcma bus.
709 	  supported by the host controller drivers.
712 	  (EHSET) for EHCI host controller hardware, specifically the "Single