Lines Matching +full:high +full:- +full:speed

1 # SPDX-License-Identifier: GPL-2.0
7 # NOTE:  Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
9 #  - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
10 #  - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
11 #  - Some systems have both kinds of controllers.
13 # With help from a special transceiver and a "Mini-AB" jack, systems with
14 # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
22 #   - integrated/SOC controllers first
23 #   - licensed IP used in both SOC and discrete versions
24 #   - discrete ones (including all PCI-only controllers)
25 #   - debug/dummy gadget+hcd is last.
39 	   full speed USB Device Port with support for five configurable
62 	  USBA is the integrated high-speed USB Device controller on some
72 	  allowing the usage of ep1 - ep6
75 	  configuration allowing the usage of ep1 - ep3
78 	  the usage of ep1 - ep8
85 	   high speed USB Device Port with support for four fixed endpoints
95 	   Some of Freescale PowerPC and i.MX processors have a High Speed
96 	   Dual-Role(DR) USB controller, which supports device mode.
123 	   speed USB device controllers, with support for up to 30
137 	   Intel's PXA 25x series XScale ARM-5TE processors include
138 	   an integrated full speed USB 1.1 device controller.  The
139 	   controller in the IXP 4xx series is register-compatible.
141 	   It has fifteen fixed-function endpoints, as well as endpoint
163 	   supports both full and high speed USB 2.0 data transfers.
175 	   that supports both full and high speed USB 2.0 data transfers.
200 	   that supports super, high, and full speed USB 3.0 data transfers.
222 	   an integrated full speed USB 1.1 device controller.
235 	  Marvell Socs (including PXA and MMP series) include a high speed
236 	  USB2.0 OTG controller, which can be configured as high speed or
237 	  full speed USB peripheral.
243 	  MARVELL PXA2128 Processor series include a super speed USB3.0 device
244 	  controller, which support super speed USB peripheral.
258 	  This IP is different to the High Speed OTG IP that can be enabled
284 	   supports both full and high speed USB 2.0 data transfers.
320 	   Some of Freescale PowerPC processors have a Full Speed
334 	  both full and high speed USB 2.0 data transfers.
357 	   supports both full and high speed USB 2.0 data transfers.
366 	   supports full, high speed USB 2.0 and super speed USB 3.0
378 	tristate "Toshiba TC86C001 'Goku-S'"
382 	   for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI).
402 	  supports both full and high speed USB 2.0 data transfers.
408 	  for IVI(In-Vehicle Infotainment) use.
422 	  and high speed USB 2.0 data transfers. It has seven configurable
427 	  dynamically linked module called "udc-xilinx" and force all
431 	tristate "MAX3420 (USB-over-SPI) support"
434 	  The Maxim MAX3420 chip supports USB2.0 full-speed peripheral mode.
464 source "drivers/usb/gadget/udc/aspeed-vhub/Kconfig"
469 # LAST -- dummy/emulated controller
479 	  can be high, full, or low speed; and they have access to endpoints
487 	  side Linux-USB device driver, this may help to debug both sides