Lines Matching refs:console
14 the console before standard serial driver is probed. The console is
33 bool "Support for console on AMBA serial port"
38 console (the system console is the device which receives all kernel
41 Even if you say Y here, the currently visible framebuffer console
42 (/dev/tty0) will still be used as the system console by default, but
44 "console=ttyAM0". (Try "man bootparam" or see the documentation of
60 bool "Support for console on AMBA serial port"
66 console (the system console is the device which receives all kernel
69 Even if you say Y here, the currently visible framebuffer console
70 (/dev/tty0) will still be used as the system console by default, but
72 "console=ttyAMA0". (Try "man bootparam" or see the documentation of
77 bool "Early console using Arm compatible semihosting"
83 Support for early debug console using Arm compatible semihosting.
84 This enables the console before standard serial driver is probed.
86 The console is enabled when early_param is processed.
89 bool "Early console using RISC-V SBI"
95 Support for early debug console using RISC-V SBI. This enables
96 the console before standard serial driver is probed. This is enabled
97 with "earlycon=sbi" on the kernel command line. The console is
116 bool "Support for console on a BCM1xxx DUART serial port"
122 system console (the system console is the device which receives all
140 bool "Support for console on AT91 serial port"
146 AT91 processor as the system console (the system
147 console is the device which receives all kernel messages and
178 /dev/, and pass "console=ttyATn" to the kernel.
183 bool "Serial console over KGDB NMI debugger port"
187 as a normal console (assuming that the port is attached to KGDB).
191 This is because this console driver processes the input in NMI
194 Note that since the console interprets input and uses polling
197 use raw console.
210 bool "Support for console on meson"
216 system console (the system console is the device which
230 bool "Support for console on CLPS711X serial port"
234 Even if you say Y here, the currently visible virtual console
235 (/dev/tty0) will still be used as the system console by default, but
237 "console=ttyCL1".
260 bool "Support for console on Samsung SoC serial port"
266 an virtual console.
268 Even if you say Y here, the currently visible virtual console
269 (/dev/tty0) will still be used as the system console by default, but
271 "console=ttySACx". (Try "man bootparam" or see the documentation of
297 bool "Support for console on a Tegra TCU serial port"
303 system console (the system console is the device which receives all
343 bool "Support console on DECstation DZ serial driver"
349 system console (the system console is the device which receives all
353 Note that the firmware uses ttyS3 as the serial console on
373 bool "Support for console on a DECstation Z85C30 serial port"
379 system console (the system console is the device which receives all
383 Note that the firmware uses ttyS1 as the serial console on the
403 make it the console by answering Y to this option.
405 Even if you say Y here, the currently visible virtual console
406 (/dev/tty0) will still be used as the system console by default, but
408 "console=ttyFB". (Try "man bootparam" or see the documentation of
436 CPU you can make it the console by answering Y to this option.
438 Even if you say Y here, the currently visible virtual console
439 (/dev/tty0) will still be used as the system console by default, but
441 "console=ttySA0". (Try "man bootparam" or see the documentation of
465 CPU you can make it the console by answering Y to this option.
467 Even if you say Y here, the currently visible virtual console
468 (/dev/tty0) will still be used as the system console by default, but
470 "console=ttySA0". (Try "man bootparam" or see the documentation of
490 CPU you can make it the console by answering Y/M to this option.
492 Even if you say Y/M here, the currently visible virtual console
493 (/dev/tty0) will still be used as the system console by default, but
495 "console=ttymxc0". (Try "man bootparam" or see the documentation of
521 bool "Support for console on Xilinx uartlite serial port"
527 console (the system console is the device which receives all kernel
561 on your Sparc system as the console, you can do so by answering
577 on your Sparc system as the console, you can do so by answering
590 software console. The following steps need to be completed to use
596 root on this console.)
597 4. Change the kernel command console parameter to: console=ttyB0
600 bool "Support for console on serial MUX"
618 on your Sparc system as the console, you can do so by answering
625 This driver supports the console device found on SUN4V Sparc
657 bool "Support for console on SuperH SCI(F)" if EXPERT
663 bool "Support for early console on SuperH SCI(F)" if EXPERT
686 bool "Enable LPC32XX high speed UART serial console"
691 ports on the LPC32XX as the console, you can do so by answering
720 bool "Coldfire serial console support"
724 Enable a ColdFire internal serial port to be the system console.
766 on your (Power)Mac as the console, you can do so by answering
778 bool "Support for console on CPM SCC/SMC serial port"
783 console (the system console is the device which receives all kernel
786 Even if you say Y here, the currently visible framebuffer console
787 (/dev/tty0) will still be used as the system console by default, but
789 "console=ttyCPM0". (Try "man bootparam" or see the documentation of
801 to use a serial port as a console, this must be included in kernel and
805 bool "PIC32 serial console support"
809 If you have a PIC32, this driver supports the putting a console on one
812 Say Y to use the PIC32 console, otherwise say N.
821 for use as console, it must be included in kernel and not as a
830 of the Freescale MPC52xx family as a console.
837 Select the MPC52xx console baud rate.
839 console baudrate
900 bool "MSM serial console support"
917 Serial console driver for Qualcomm Technologies Inc's GENI based
926 bool "VIA VT8500 serial console support"
948 console.
950 Even if you say Y here, the currently visible virtual console
951 (/dev/tty0) will still be used as the system console by default, but
953 "console=ttyOx". (Try "man bootparam" or see the documentation of
975 system console.
977 Even if you say Y here, the currently visible virtual console
978 (/dev/tty0) will still be used as the system console by default, but
980 "console=ttySIFx". (Try "man bootparam" or see the documentation of
1000 system console.
1024 Support for console on SCCNXP serial ports.
1072 BCM7xxx (STB) - DOCSIS console
1081 you can make it the console by answering Y to this option.
1095 Support for running a console on the GRLIB APBUART
1104 bool "Altera JTAG UART console support"
1109 Enable a Altera JTAG UART port to be the system console.
1116 Bypass console output and keep going even if there is no
1144 bool "Altera UART console support"
1149 Enable a Altera UART port to be the system console.
1168 bool "Support for console on Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
1172 Say Y here if you wish to use the PCH UART as the system console
1173 (the system console is the device which receives all kernel messages and
1186 bool "MXS AUART console support"
1190 Enable a MXS AUART port to be the system console.
1201 bool "Cadence UART console support"
1206 Enable a Cadence UART port to be the system console.
1225 Enable a built-in UART port of the AR933X to be the system console.
1236 bool "MPS2 UART console support"
1310 you can make it the console by answering Y to this option.
1326 SoCs, you can make it the console by answering Y to this option.
1341 SoCs, you can make it the console by answering Y to this option.
1356 bool "Support for console on ST ASC"
1379 bool "Spreadtrum UART console support"
1384 Support for early debug console using Spreadtrum's serial. This enables
1385 the console before standard serial driver is probed. This is enabled
1386 with "earlycon" on the kernel command line. The console is
1403 bool "Support for console on STM32"
1427 Say 'Y' here if you wish to use Armada-3700 UART as the system console.
1428 (the system console is the device which receives all kernel messages
1449 as the system console.
1468 console. Only earlycon is implemented currently.
1485 bool "Support for console on MILBEAUT USIO/UART serial port"
1492 SoCs as the system console (the system console is the device which
1518 bool "LiteUART serial port console support"
1524 controller from LiteX SoC builder as the system console
1525 (the system console is the device which receives all kernel messages
1548 system console.
1549 Even if you say Y here, the currently visible virtual console
1550 (/dev/tty0) will still be used as the system console by default, but
1552 "console=ttySUPx".
1561 for use as console, it must be included in kernel and not as a
1571 Nuvoton MA35D1 family as a console.
1572 Even if you say Y here, the currently visible virtual console
1573 (/dev/tty0) will still be used as the system console by default,
1575 "console=ttyNVTx".