Lines Matching +full:in +full:- +full:ports
1 # SPDX-License-Identifier: GPL-2.0
19 comment "Non-8250 serial port support"
39 messages and warnings and which allows logins in single user mode).
67 messages and warnings and which allows logins in single user mode).
89 bool "Early console using RISC-V SBI"
95 Support for early debug console using RISC-V SBI. This enables
101 tristate "BCM1xxx on-chip DUART serial support"
106 Support for the asynchronous serial interface (DUART) included in
107 the BCM1250 and derived System-On-a-Chip (SOC) devices. Note that
108 the letter D in DUART stands for "dual", which is how the device
113 the module will be called sb1250-duart.
123 kernel messages and warnings and which allows logins in single user
129 bool "AT91 on-chip serial port support"
136 This enables the driver for the on-chip UARTs of the Atmel
145 Say Y here if you wish to use an on-chip UART on a Atmel
148 warnings and which allows logins in single user mode).
156 and from the Atmel AT91 serial port. In order to
158 and use_dma_rx members in the atmel_uart_data struct is set
162 properly when DMA is enabled. Make sure that ports where
177 To use this, you should create suitable ttyATn device nodes in
191 This is because this console driver processes the input in NMI
206 This enables the driver for the on-chip UARTs of the Amlogic
218 logins in single user mode) as /dev/ttyAMLx.
226 This enables the driver for the on-chip UARTs of the Cirrus
244 Support for the on-chip UARTs on the Samsung
247 these ports, depending on how the serial port pins are configured.
256 Select the number of available UART ports for the Samsung S3C
265 Allow selection of the S3C24XX on-board serial ports for use as
280 Support for the on-chip UARTs on the NVIDIA Tegra series SOCs
282 provide all of these ports, depending on how the serial port
292 Support for the mailbox-based TCU (Tegra Combined UART) serial port.
304 kernel messages and warnings and which allows logins in single user
329 that can be controlled through I2C or high-speed SPI.
339 DZ11-family serial controllers for DECstations and VAXstations,
350 kernel messages and warnings and which allows logins in single user
365 for serial ports in newer DECstation systems. These include the
380 kernel messages and warnings and which allows logins in single user
420 can enable its onboard serial ports by enabling this option.
528 messages and warnings and which allows logins in single user mode).
531 int "Maximum number of uartlite serial ports"
536 Set this to the number of uartlites in your system, or the number
538 If maximum number of uartlite serial ports is more than 4, then the
553 This driver supports the Zilog8530 serial ports found on many Sparc
554 systems. Say Y or M if you want to be able to these serial ports.
568 This driver supports the 8250 serial ports that run the keyboard and
570 to these serial ports.
609 This driver supports the Siemens SAB82532 DUSCC serial ports on newer
611 serial ports.
633 This driver supports the Zilog8530 serial ports found on SGI
634 systems. Say Y or M if you want to be able to these serial ports.
648 int "Maximum number of SCI(F) serial ports" if EXPERT
680 Support for the LPC32XX high speed serial ports (up to 900kbps).
691 ports on the LPC32XX as the console, you can do so by answering
708 This serial driver supports the Freescale Coldfire serial ports.
711 int "Default baudrate for Coldfire serial ports"
716 ColdFire serial ports. The usual default varies from board to board,
731 This driver supports the Zilog z85C30 serial ports found on
733 Say Y or M if you want to be able to these serial ports.
743 both z85C30 and 8250 type ports at the same time.
747 the pmac_zilog and 8250 drivers to co-exist, but may cause
749 access the built-in serial ports on powermacs will need to
752 If you enable this option, any z85c30 ports in the system will
753 be registered as ttyS0 onwards as in the past, and you will be
754 unable to use the 8250 module for PCMCIA or other 16C550-style
757 Say N unless you need the z85c30 ports on your (Power)Mac
774 This driver supports the SCC and SMC serial ports on Motorola
784 messages and warnings and which allows logins in single user mode).
798 If you have a PIC32, this driver supports the serial ports.
800 Say Y or M to use PIC32 serial ports, otherwise say N. Note that
801 to use a serial port as a console, this must be included in kernel and
810 of the serial ports.
819 This driver supports MPC52xx and MPC512x PSC serial ports. If you would
821 for use as console, it must be included in kernel and not as a
838 This value is only used if the bootloader doesn't pass in the
865 int "Maximum number of TMPTX39XX/49XX SIO ports"
884 of cards which provide multiple serial ports. You would need
886 box, for instance in order to become a dial-in server. This driver
895 tristate "MSM on-chip serial port support"
906 tristate "QCOM on-chip GENI based serial port support"
921 bool "VIA VT8500 on-chip serial port support"
936 can enable its onboard serial ports by enabling this option.
939 with the omap-serial driver. DMA support can be enabled from platform
1008 This driver supports the QE serial ports on Freescale embedded
1024 Support for console on SCCNXP serial ports.
1072 BCM7xxx (STB) - DOCSIS console
1126 int "Maximum number of Altera UART ports"
1131 UART ports. The usual default varies from board to board, and
1135 int "Default baudrate for Altera UART ports"
1140 Altera UART ports. The usual default varies from board to board,
1162 ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
1174 warnings and which allows logins in single user mode).
1197 This driver supports the Cadence UART. It is found e.g. in Xilinx
1215 built-in UART of the SoC, say Y to this option.
1225 Enable a built-in UART port of the AR933X to be the system console.
1228 int "Maximum number of AR933X serial ports"
1232 Set this to the number of serial ports you want the driver
1246 This driver support the UART ports on ARM MPS2.
1252 Driver for on-chip UART for ARC(Synopsys) for the legacy
1264 int "Number of ARC UART ports"
1269 Set this to the number of serial ports you want the driver
1289 int "Maximum number of RocketPort EXPRESS/INFINITY ports"
1293 If multiple cards are present, the default limit of 32 ports may
1301 Support for the on-chip lpuart on some Freescale SOCs.
1317 Support for the on-chip LINFlexD UART on some Freescale SOCs.
1333 Support for the on-chip USART on Conexant Digicolor SoCs.
1348 This driver is for the on-chip Asynchronous Serial Controller on
1350 ASC is embedded in ST COMMS IP block. It supports Rx & Tx functionality.
1365 Say yes here to enable support for the MEN 16z135 High Speed UART IP-Core
1395 This driver is for the on-chip Serial Controller on
1415 based on the Armada-3700 SoC and wish to use the on-board serial
1427 Say 'Y' here if you wish to use Armada-3700 UART as the system console.
1429 and warnings and which allows logins in single user mode)
1438 Say 'Y' here if you wish to use the on-board serial port.
1457 Say 'Y' here if you wish to use the on-board serial port.
1476 This selects the USIO/UART IP found in Socionext Milbeaut SoCs.
1479 int "Maximum number of CSIO/UART ports (1-8)"
1493 receives all kernel messages and warnings and which allows logins in
1503 This driver is for the FPGA-based LiteUART serial controller from LiteX
1510 int "Maximum number of LiteUART ports"
1514 Set this to the maximum number of serial ports you want the driver
1523 Say 'Y' or 'M' here if you wish to use the FPGA-based LiteUART serial
1526 and warnings and which allows logins in single user mode).
1536 If you enable this option, Sunplus serial ports in the system will
1539 called sunplus-uart.
1559 This driver supports Nuvoton MA35D1 family UART ports. If you would
1561 for use as console, it must be included in kernel and not as a
1562 module. If you enable this option, Ma35D1 serial ports in the system