78 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
97 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
106 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
120 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01,
129 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
138 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
145 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11,
152 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
159 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
166 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
173 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
180 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
189 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
197 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11 |
206 		.fcr		= UART_FCR_DMA_SELECT | UART_FCR_ENABLE_FIFO |
223 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
231 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
239 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
252 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
260 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
268 		.fcr		= UART_FCR_DMA_SELECT | UART_FCR_ENABLE_FIFO |
277 		.fcr		= UART_FCR_ENABLE_FIFO |
285 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
294 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
302 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
310 		.fcr            = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01,
318 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01,
496 	serial_out(p, UART_FCR, p->fcr);  in serial8250_clear_and_reinit_fifos()
2748 			up->fcr &= ~UART_FCR_TRIGGER_MASK;  in serial8250_do_set_termios()
2749 			up->fcr |= UART_FCR_TRIGGER_1;  in serial8250_do_set_termios()
2835 		serial_port_out(port, UART_FCR, up->fcr);  in serial8250_do_set_termios()
2840 		if (up->fcr & UART_FCR_ENABLE_FIFO)  in serial8250_do_set_termios()
2842 		serial_port_out(port, UART_FCR, up->fcr);	/* set fcr */  in serial8250_do_set_termios()
3013 	bytes = conf_type->rxtrig_bytes[UART_FCR_R_TRIG_BITS(up->fcr)];  in fcr_get_rxtrig_bytes()
3086 	up->fcr &= ~UART_FCR_TRIGGER_MASK;  in do_set_rxtrig()
3087 	up->fcr |= (unsigned char)rxtrig;  in do_set_rxtrig()
3088 	serial_out(up, UART_FCR, up->fcr);  in do_set_rxtrig()
3173 	up->fcr = uart_config[up->port.type].fcr;  in serial8250_config_port()
3382 		(up->fcr & UART_FCR_ENABLE_FIFO) &&  in serial8250_console_write()