1 // SPDX-License-Identifier: GPL-2.0
41 #define S5_STATUS_OFF		0x3664  /* Sensors 5-10 found on apq8064/msm8960 */
48 /* Original slope - 350 to compensate mC to C inaccuracy */
59 	struct regmap *map = priv->tm_map;  in suspend_8960()
61 	ret = regmap_read(map, THRESHOLD_ADDR, &priv->ctx.threshold);  in suspend_8960()
65 	ret = regmap_read(map, CNTL_ADDR, &priv->ctx.control);  in suspend_8960()
69 	if (priv->num_sensors > 1)  in suspend_8960()
84 	struct regmap *map = priv->tm_map;  in resume_8960()
94 	if (priv->num_sensors > 1) {  in resume_8960()
100 	ret = regmap_write(map, THRESHOLD_ADDR, priv->ctx.threshold);  in resume_8960()
104 	ret = regmap_write(map, CNTL_ADDR, priv->ctx.control);  in resume_8960()
116 	ret = regmap_read(priv->tm_map, CNTL_ADDR, &reg);  in enable_8960()
123 	 * (Sensor 6-7 disabled, Sensor 3 disabled...) In the original driver,  in enable_8960()
136 	ret = regmap_write(priv->tm_map, CNTL_ADDR, reg | SW_RST);  in enable_8960()
142 	if (priv->num_sensors > 1)  in enable_8960()
147 	ret = regmap_write(priv->tm_map, CNTL_ADDR, reg);  in enable_8960()
160 	mask = GENMASK(priv->num_sensors - 1, 0);  in disable_8960()
164 	ret = regmap_read(priv->tm_map, CNTL_ADDR, &reg_cntl);  in disable_8960()
170 	if (priv->num_sensors > 1)  in disable_8960()
175 	regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);  in disable_8960()
184 	data = qfprom_read(priv->dev, "calib");  in calibrate_8960()
186 		data = qfprom_read(priv->dev, "calib_backup");  in calibrate_8960()
190 	for (i = 0; i < priv->num_sensors; i++) {  in calibrate_8960()
192 		priv->sensor[i].slope = tsens_msm8960_slope[i];  in calibrate_8960()
203 	/* ----- SROT ------ */
212 	/* ----- TM ------ */
221 	 * MIN_THRESH_0 -> CRIT_THRESH_1
222 	 * MAX_THRESH_0 -> CRIT_THRESH_0
273 	.adc		= 1,
276 	.trip_min_temp	= -40000,