Lines Matching +full:qspi +full:- +full:nor
1 # SPDX-License-Identifier: GPL-2.0-only
13 dynamic device discovery; some are even write-only or read-only.
17 chips, analog to digital (and d-to-a) converters, and more.
44 If your system has an master-capable SPI controller (which
56 by providing a high-level interface to send memory-like commands.
66 This enables support for SPI-NAND mode on the Airoha NAND
68 is implemented as a SPI-MEM controller.
128 to SPI NOR chips, and support for the SPI flash memory
130 only supports SPI NOR.
155 supports spi-mem interface.
216 based platforms. This driver works for both SPI master for SPI NOR
234 this code to manage the per-word or per-transfer accesses to the
263 Cadence QSPI is a specialized controller for connecting an SPI
264 Flash over 1/2/4-bit wide bus. Enable this option if you have a
265 device with a Cadence QSPI controller and want to access the
276 Flash over up to 8-bit wide bus. Enable this option if you have a
290 This enables dedicated general purpose SPI/Microwire1-compatible
291 master mode interface (SSI1) for CLPS711X-based CPUs.
294 tristate "Freescale Coldfire QSPI controller"
297 This enables support for the Coldfire QSPI controller in master
309 tristate "Texas Instruments DaVinci/DA8x/OMAP-L/AM1x SoC SPI controller"
313 SPI master controller for DaVinci/DA8x/OMAP-L/AM1x SPI modules.
331 tristate "Memory-mapped io interface driver for DW SPI core"
335 tristate "Baikal-T1 SPI driver for DW SPI core"
339 Baikal-T1 SoC is equipped with three DW APB SSI-based MMIO SPI
342 part of the Baikal-T1 System Boot Controller has got a very
344 chip-select and Tx/Rx FIFO with just 8 words depth available.
345 The later one is normally connected to an external SPI-nor flash
349 bool "Directly mapped Baikal-T1 Boot SPI flash support"
353 Baikal-T1 System Boot Controller. It is a 16MB MMIO region, which
358 time-critical tasks (like the SPI memory operations implemented
364 tristate "Diolan DLN-2 USB SPI adapter"
371 will be called spi-dln2.
384 The external bus unit (EBU) found on the FALC-ON SoC has SPI
403 tristate "Freescale QSPI controller"
411 supports the high-level SPI memory interface.
428 will be called hisi-kunpeng-spi.
431 tristate "HiSilicon SPI NOR Flash Controller for Hi16XX chipsets"
435 This enables support for HiSilicon v3xx SPI NOR flash controller
447 supports the high-level SPI memory interface.
450 tristate "GPIO-based bitbanging SPI Master"
454 This simple GPIO bitbanging SPI master uses the arch-neutral GPIO
485 will be called spi-ingenic.
506 will be called spi-intel-pci.
518 exposes the low level SPI-NOR opcodes to the software. Using
525 will be called spi-intel-platform.
528 tristate "J-Core SPI Master"
531 This enables support for the SPI master controller in the J-Core
570 tristate "ICP DAS LP-8841 SPI Controller for RTC"
574 DS-1302 real time clock.
577 LP-8x4x industrial computer.
580 tristate "Freescale MPC52xx SPI (non-PSC) controller support"
645 will be called spi-ljca.
670 If built as a module, it will be called spi-microchip-core.
673 tristate "Microchip FPGA QSPI controllers"
676 This enables the QSPI driver for Microchip FPGA QSPI controllers.
677 Say Y or M here if you want to use the QSPI controllers on
679 If built as a module, it will be called spi-microchip-core-qspi.
697 tristate "MediaTek SPI NOR controller"
700 This enables support for SPI NOR controller found on MediaTek
701 ARM SoCs. This is a controller specifically for SPI NOR flash.
703 SPI interface as well as several SPI NOR specific instructions
711 This enables support for SPI-NAND mode on the MediaTek NAND
713 is implemented as a SPI-MEM controller with pipelined ECC
725 supports the spi-mem interface.
735 supports spi-mem interface.
782 tristate "DRA7xxx QSPI controller support"
785 QSPI master controller for DRA7xxx used for flash devices.
803 called as spi-pci1xxxx.
877 tristate "Renesas RPC-IF SPI driver"
880 SPI driver for Renesas R-Car Gen3 or RZ/G2 RPC-IF.
883 tristate "Renesas RSPI/QSPI controller"
886 SPI driver for Renesas RSPI and QSPI blocks.
896 tristate "QTI QSPI controller"
899 QSPI(Quad SPI) driver for Qualcomm QSPI controller.
907 for serial peripheral interface (SPI) mini-core. SPI in master
920 yes to this option, support will be included for the built-in SPI
924 will be called spi-geni-qcom.
987 for connecting an SPI Flash memory over up to 8-bit wide bus.
1022 supports spi-mem interface.
1025 tristate "STMicroelectronics SPI SSC-based driver"
1050 called as spi-sunplus-sp7021.
1061 that use the de-facto standard SPI protocol.
1063 It also supports the new dual-bit and quad-bit SPI protocol.
1080 tristate "NVIDIA Tegra QSPI Controller"
1084 QSPI driver for NVIDIA Tegra QSPI Controller interface. This
1145 tristate "Analog Devices AD-FMCOMMS1-EBZ SPI-I2C-bridge driver"
1148 Support for the SPI-I2C bridge found on the Analog Devices
1149 AD-FMCOMMS1-EBZ board.
1186 tristate "Xilinx Zynq QSPI controller"
1220 select one or more specific mux-controller drivers.
1264 If your system has a slave-capable SPI controller, you can enable