636 	pr_probeinfo->io_addr = 0;  in blogic_init_mm_probeinfo()
648 		unsigned long io_addr;  in blogic_init_mm_probeinfo()  local
660 		io_addr = base_addr0 = pci_resource_start(pci_device, 0);  in blogic_init_mm_probeinfo()
665 			blogic_err("at PCI Bus %d Device %d I/O Address 0x%lX\n", NULL, bus, device, io_addr);  in blogic_init_mm_probeinfo()
675 			blogic_err("at PCI Bus %d Device %d I/O Address 0x%lX\n", NULL, bus, device, io_addr);  in blogic_init_mm_probeinfo()
680 …PCI Bus %d Device %d I/O Address 0x%lX PCI Address 0x%lX\n", NULL, bus, device, io_addr, pci_addr);  in blogic_init_mm_probeinfo()
688 		host_adapter->io_addr = io_addr;  in blogic_init_mm_probeinfo()
742 			pr_probeinfo->io_addr = io_addr;  in blogic_init_mm_probeinfo()
754 			probeinfo->io_addr = io_addr;  in blogic_init_mm_probeinfo()
790 		unsigned long io_addr;  in blogic_init_mm_probeinfo()  local
801 		io_addr = pci_resource_start(pci_device, 0);  in blogic_init_mm_probeinfo()
803 		if (io_addr == 0 || irq_ch == 0)  in blogic_init_mm_probeinfo()
808 			if (probeinfo->io_addr == io_addr &&  in blogic_init_mm_probeinfo()
846 		unsigned long io_addr;  in blogic_init_fp_probeinfo()  local
858 		io_addr = base_addr0 = pci_resource_start(pci_device, 0);  in blogic_init_fp_probeinfo()
863 			blogic_err("at PCI Bus %d Device %d I/O Address 0x%lX\n", NULL, bus, device, io_addr);  in blogic_init_fp_probeinfo()
873 			blogic_err("at PCI Bus %d Device %d I/O Address 0x%lX\n", NULL, bus, device, io_addr);  in blogic_init_fp_probeinfo()
878 …PCI Bus %d Device %d I/O Address 0x%lX PCI Address 0x%lX\n", NULL, bus, device, io_addr, pci_addr);  in blogic_init_fp_probeinfo()
885 			probeinfo->io_addr = io_addr;  in blogic_init_fp_probeinfo()
896 …c: I/O Address 0x%lX PCI Address 0x%lX, irq %d, but FlashPoint\n", NULL, io_addr, pci_addr, irq_ch…  in blogic_init_fp_probeinfo()
950 				myadapter->io_addr = probeinfo->io_addr;  in blogic_init_probeinfo_list()
997 …%lX PCI Address 0x%lX:\n", adapter, adapter->bus, adapter->dev, adapter->io_addr, adapter->pci_add…  in blogic_failure()
999 …_err("While configuring BusLogic Host Adapter at I/O Address 0x%lX:\n", adapter, adapter->io_addr);  in blogic_failure()
1022 		fpinfo->base_addr = (u32) adapter->io_addr;  in blogic_probe()
1028 …/O Address 0x%lX PCI Address 0x%lX, but FlashPoint\n", adapter, adapter->io_addr, adapter->pci_add…  in blogic_probe()
1033 			blogic_notice("BusLogic_Probe(0x%lX): FlashPoint Found\n", adapter, adapter->io_addr);  in blogic_probe()
1050 …: Status 0x%02X, Interrupt 0x%02X, Geometry 0x%02X\n", adapter, adapter->io_addr, statusreg.all, i…  in blogic_probe()
1129 …rdwareReset(0x%lX): Diagnostic Active, Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);  in blogic_hwreset()
1149 …areReset(0x%lX): Diagnostic Completed, Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);  in blogic_hwreset()
1165 …dwareReset(0x%lX): Host Adapter Ready, Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);  in blogic_hwreset()
1222 				adapter->io_addr,  in blogic_checkadapter()
1711 …ddress: 0x%lX, IRQ Channel: %d/%s\n", adapter, adapter->fw_ver, adapter->io_addr, adapter->irq_ch,…  in blogic_reportconfig()
2148 	host->unique_id = adapter->io_addr;  in blogic_inithoststruct()
2240 		if (probeinfo->io_addr == 0)  in blogic_init()
2245 		myadapter->io_addr = probeinfo->io_addr;  in blogic_init()
2257 		if (!request_region(myadapter->io_addr, myadapter->addr_count,  in blogic_init()
2265 			release_region(myadapter->io_addr,  in blogic_init()
2274 			release_region(myadapter->io_addr,  in blogic_init()
2283 			release_region(myadapter->io_addr,  in blogic_init()
2305 			release_region(myadapter->io_addr,  in blogic_init()
2344 			release_region(myadapter->io_addr,  in blogic_init()
2346 			if (!request_region(myadapter->io_addr,  in blogic_init()
2352 					(unsigned long)myadapter->io_addr);  in blogic_init()
2427 	release_region(adapter->io_addr, adapter->addr_count);  in blogic_deladapter()