25 /* timeout for FSF requests sent during scsi_eh: abort or FCP TMF */
35 …"Shuts down FCP devices for FCP channels that report a bit-error count in excess of its threshold …
82 	dev_err(&req->adapter->ccw_device->dev, "FCP device not "  in zfcp_fsf_class_not_supp()
175 			 "support FCP\n");  in zfcp_fsf_link_down_info_eval()
179 			 "The FCP device is suspended because of a "  in zfcp_fsf_link_down_info_eval()
184 			 "The FCP device detected a WWPN that is "  in zfcp_fsf_link_down_info_eval()
193 			 "The FCP adapter cannot support more NPIV ports\n");  in zfcp_fsf_link_down_info_eval()
202 			 "The FCP adapter could not log in to the "  in zfcp_fsf_link_down_info_eval()
207 			 "The WWPN assignment file on the FCP adapter "  in zfcp_fsf_link_down_info_eval()
212 			 "The mode table on the FCP adapter "  in zfcp_fsf_link_down_info_eval()
217 			 "All NPIV ports on the FCP adapter have "  in zfcp_fsf_link_down_info_eval()
222 			 "The link between the FCP adapter and "  in zfcp_fsf_link_down_info_eval()
285 				 "All paths over this FCP device are disused because of excessive bit errors\n");  in zfcp_fsf_status_read_handler()
343 			"The FCP adapter reported a problem "  in zfcp_fsf_fsfstatus_qual_eval()
361 			"The FCP adapter does not recognize the command 0x%x\n",  in zfcp_fsf_fsfstatus_eval()
391 			"QTCB version 0x%x not supported by FCP adapter "  in zfcp_fsf_protstatus_eval()
403 			"The QTCB type is not supported by the FCP adapter\n");  in zfcp_fsf_protstatus_eval()
444  * When a request has been completed either from the FCP adapter,
613 				"FCP adapter maximum QTCB size (%d bytes) "  in zfcp_fsf_exchange_config_data_handler()
647 			"The FCP adapter only supports newer "  in zfcp_fsf_exchange_config_data_handler()
654 			"The FCP adapter only supports older "  in zfcp_fsf_exchange_config_data_handler()
1417  * zfcp_fsf_exchange_config_data_sync() - Request information about FCP channel.
1675 	 * Send FCP command error codes  in zfcp_fsf_log_security_error()
1711 			 "Not enough FCP adapter resources to open "  in zfcp_fsf_open_port_handler()
1748 		 * FIXME: This check is not airtight, as the FCP channel does  in zfcp_fsf_open_port_handler()
2387  * zfcp_fsf_fcp_handler_common() - FCP response handler common to I/O and TMF.
2428 			"Incorrect FCP_CMND length %d, FCP device closed\n",  in zfcp_fsf_fcp_handler_common()
2556  * zfcp_fsf_fcp_cmnd - initiate an FCP command (for a SCSI command)