ralink/rt2x00/rt2500pci.h

1 /* SPDX-License-Identifier: GPL-2.0-or-later */
3 	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
36  * Default offset is required for RSSI <-> dBm conversion.
120  * TWAKE_EXPIRE: Wakeup timer expired interrupt.
128  * UART1_TX_TRESHOLD: UART1 TX reaches threshold.
129  * UART1_RX_TRESHOLD: UART1 RX reaches threshold.
130  * UART1_IDLE_TRESHOLD: UART1 IDLE over threshold.
133  * UART2_TX_TRESHOLD: UART2 TX reaches threshold.
134  * UART2_RX_TRESHOLD: UART2 RX reaches threshold.
135  * UART2_IDLE_TRESHOLD: UART2 IDLE over threshold.
167  * TWAKE_EXPIRE: Wakeup timer expired interrupt.
175  * UART1_TX_TRESHOLD: UART1 TX reaches threshold.
176  * UART1_RX_TRESHOLD: UART1 RX reaches threshold.
177  * UART1_IDLE_TRESHOLD: UART1 IDLE over threshold.
180  * UART2_TX_TRESHOLD: UART2 TX reaches threshold.
181  * UART2_RX_TRESHOLD: UART2 RX reaches threshold.
182  * UART2_IDLE_TRESHOLD: UART2 IDLE over threshold.
218  * KICK_DECRYPT: Kick decryption engine, self-clear.
228  * CSR11: Back-off control register.
229  * CWMIN: CWmin. Default cwmin is 31 (2^5 - 1).
230  * CWMAX: CWmax. Default cwmax is 1023 (2^10 - 1).
267  * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode.
287  * CFP: ASIC is in contention-free period.
327  * CSR20: Wakeup timer register.
329  * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup.
330  * AUTOWAKE: Enable auto wakeup / sleep mechanism.
545  * RX_TRESHOLD: Rx threshold in dw to start pci access
547  * TX_TRESHOLD: Tx threshold in dw to start pci access
550  * ENABLE_CLK: Enable clk_run, pci clock can't going down to non-operational.
647  * KICK_RX: Kick one-shot rx in one-shot rx mode.
648  * ONESHOT_RXMODE: Enable one-shot rx mode for debugging.
665  * RALINKCSR: Ralink Rx auto-reset BBCR.
818  * MACCSR2: TX_PE to RX_PE turn-around time control register
891  * KICK_ENCRYPT: Kick encryption engine, self-clear.
1072  * RSSI <-> dBm offset calibration
1136  * Word6-9: Key
1198  * Word6-9: Key