Lines Matching +full:reset +full:- +full:duration +full:- +full:ms

1 /* SPDX-License-Identifier: GPL-2.0-or-later */
3 	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
25  * Default offset is required for RSSI <-> dBm conversion.
59  * SOFT_RESET: Software reset, 1: reset, 0: normal.
60  * BBP_RESET: Hardware reset, 1: reset, 0, release.
153  * CSR11: Back-off control register.
154  * CWMIN: CWmin. Default cwmin is 31 (2^5 - 1).
155  * CWMAX: CWmax. Default cwmax is 1023 (2^10 - 1).
171  * CFPMAX_DURATION: Cfp maximum duration, default is 100 TU.
180  * ATIMW_DURATION: Atim window duration.
190  * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode.
210  * CFP: ASIC is in contention-free period.
275  * CFP_DURATION_REMAIN: Cfp duration remain, in units of TU.
276  * RELOAD_CFP_DURATION: Write 1 to reload cfp duration remain.
459  * ENABLE_CLK: Enable clk_run, pci clock can't going down to non-operational.
544  * KICK_RX: Kick one-shot rx in one-shot rx mode.
545  * ONESHOT_RXMODE: Enable one-shot rx mode for debugging.
546  * BBPRX_RESET_MODE: Ralink bbp rx reset mode.
562  * RALINKCSR: Ralink Rx auto-reset BBCR.
563  * AR_BBP_DATA#: Auto reset BBP register # data.
564  * AR_BBP_ID#: Auto reset BBP register # id.
621  * ON_PERIOD: On period, default 70ms.
622  * OFF_PERIOD: Off period, default 30ms.
684  * MACCSR2: TX_PE to RX_PE turn-around time control register
945 	((__CLAMP_TX(__txpower) - MAX_TXPOWER) + MIN_TXPOWER)
948 	(MAX_TXPOWER - (__CLAMP_TX(__txpower) - MIN_TXPOWER))