Lines Matching +full:tx +full:- +full:freq

2 # Copyright 2011-2020 NXP
9 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
10 # worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
12 # THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
38 	Following are some useful iw commands:-
45 iw dev mlan0 connect -w <SSID> [<freq in MHz>] [<bssid>] [key 0:abcde d:1123456789a]
55 iw dev mlan0 ibss join <SSID> <freq in MHz> [fixed-freq] [fixed-bssid] [key 0:abcde]
65 	such as SSID, operating frequency, rx/tx packets, signal strength, tx bitrate.
79 		mount -t debugfs debugfs /debugfs
98 	bss_mode = "Ad-hoc" | "Managed" | "Auto" | "Unknown"
100 	mac_address = <6-byte adapter MAC address>
111 	num_tx_pkts_dropped = <number of Tx packets dropped by driver>
113 	num_tx_pkts_err = <number of Tx packets failed to send to device>
116 	tx queue "stopped" | "started"
125 	tx_buf_size = <current Tx buffer size>
126 	curr_tx_buf_size = <current Tx buffer size>
128 	ps_state = <0/1/2/3, full power state/awake state/pre-sleep state/sleep state>
134 	num_tx_timeout = <number of Tx timeout>
156 	mp_rd_bitmap = <SDIO multi-port read bitmap>
157 	mp_wr_bitmap = <SDIO multi-port write bitmap>
161 	tx_pending = <number of Tx packet pending>
203 		iwpriv mlan0 memrdwr -0x7fff6000 -0x40000000
216 		<length>:   4-20, multiples of 4
230 		<condition>: bit 0 = 1   -- broadcast data
231 			     bit 1 = 1   -- unicast data
232 			     bit 2 = 1   -- mac event
233 			     bit 3 = 1   -- multicast data
235 			 GPIO pin# (e.g. 0-7) or 0xff (interface, e.g. SDIO
242 		echo "-1" > hscfg        : Cancel host sleep mode